{"title":"Corner Benches","description":"","products":[{"product_id":"quick-service-1000mm-wide-x-600mm-deep-stainless-steel-angled-corner-wall-bench","title":"Quick Service 1000mm Angled Corner Wall Bench in Stainless Steel","description":"\u003cp\u003eThis angled corner wall bench from Quick Service is a fully welded, free-standing fabrication designed to make practical use of corner space in commercial kitchen prep and service areas. Built to sit against the wall, it combines a 304-grade stainless steel worktop with a lower storage shelf and a structural framework in 430-grade steel, giving it the rigidity needed for day-to-day kitchen work.\u003c\/p\u003e\n\n\u003cp\u003eIn a working kitchen, corner space is often wasted or awkwardly served by standard straight benches. An angled corner unit addresses this directly — it bridges the junction cleanly, keeps the worktop surface usable from both sides, and integrates with back-counter runs at the standard 900mm working height. The welded under-shelf adds useful storage at low level without interfering with floor cleaning or foot traffic.\u003c\/p\u003e\n\n\u003cp\u003eA few details make this bench practical rather than just functional:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eRear legs inset 100mm to allow service pipework to run behind without obstruction\u003c\/li\u003e\n\u003cli\u003eFlanged levelling feet allow mechanical fixing to the floor for a stable, compliant installation\u003c\/li\u003e\n\u003cli\u003eHeight adjustment of -15\/+35mm to accommodate uneven floors or match adjacent equipment\u003c\/li\u003e\n\u003cli\u003e50mm worktop downstand to each edge for structural rigidity and a clean finish\u003c\/li\u003e\n\u003cli\u003e50mm splashbacks to the rear and side wall upstands to protect the wall surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eInstallation is straightforward for a fabricated piece of this type — it requires no utilities, no electrical connection, and no drainage. The main practical consideration is confirming the exact corner geometry of your kitchen, as angled units are not always interchangeable with right-angle configurations. It is worth checking the bench aligns with any adjacent straight runs in terms of height and depth before ordering.\u003c\/p\u003e\n\n\u003cp\u003eThis bench is well suited to small and medium commercial kitchens, café prep areas, and school or care catering facilities where corner space needs to be brought into productive use. For larger operations requiring heavier-gauge fabrication or custom configurations, it is worth considering whether a bespoke or heavier-duty option would be more appropriate.\u003c\/p\u003e\n\n\u003cp\u003eIf you are fitting out a run of benching and want to make sure the corner unit will integrate correctly with your layout, our team is happy to talk through the details before you order.\u003c\/p\u003e","brand":"Quick Service","offers":[{"title":"Default Title","offer_id":44860000108861,"sku":"QACWB66","price":438.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/products\/angledcornerwallbench.jpg?v=1679494195"},{"product_id":"quick-service-1000mm-wide-x-650mm-deep-stainless-steel-angled-corner-wall-bench","title":"Quick Service 1000mm Angled Corner Wall Bench Stainless Steel","description":"\u003cp\u003eThis angled corner wall bench from Quick Service is a fully welded, free-standing fabrication designed to make productive use of corner space along kitchen walls. The worktop is constructed in 304-grade stainless steel with a 430-grade box section framework, and the unit ships as a finished, ready-to-position piece rather than a flat-pack assembly. It is intended to sit against the wall as a working surface, with the angled profile resolving the awkward dead zone that a standard right-angle corner bench can create.\u003c\/p\u003e\u003cp\u003eIn a working kitchen, corner benches of this type are commonly used as prep stations, pass-through areas, or secondary worktops where continuous wall runs need to turn a corner without interrupting workflow. The welded construction holds up well under daily commercial use, and the low-level under-shelf provides useful storage for trays, containers, or small equipment that would otherwise clutter the worktop.\u003c\/p\u003e\u003cp\u003eFrom an operational standpoint, a few practical details are worth noting:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e50mm upstands to the rear and sides protect the wall from water and food debris during prep\u003c\/li\u003e\n\u003cli\u003eLegs are inset 100mm from the rear wall, leaving clearance for service pipework running behind the bench\u003c\/li\u003e\n\u003cli\u003eFlanged levelling feet allow mechanical fixing to the floor and accommodate minor floor irregularities\u003c\/li\u003e\n\u003cli\u003eStandard height suits most back-counter runs, with a usable adjustment range to match adjacent equipment\u003c\/li\u003e\n\u003cli\u003eThe 50mm worktop down-stand stiffens the surface and gives a clean, professional finish to exposed edges\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstallation is straightforward — no services are required, and no specialist trades are typically needed beyond positioning and levelling. The inset rear legs assume that any pipework or conduit running along the base of the wall has already been considered; it is worth measuring that clearance before ordering. The bench is wall-sited rather than wall-hung, so structural wall fixings are not required, though the splashback upstands should sit flush against a clean, even wall surface for best results.\u003c\/p\u003e\u003cp\u003eThis bench suits smaller to mid-sized kitchens where a single corner position needs resolving cleanly. It is a practical, no-frills fabrication — well suited to cafés, pub kitchens, school catering facilities, and similar operations. Sites with more demanding throughput requirements or where a full run of bespoke fabrication is needed may find a heavier-duty or made-to-measure option more appropriate.\u003c\/p\u003e\u003cp\u003eIf you are unsure whether this bench fits your particular corner configuration or would work alongside your existing equipment run, we are happy to talk it through before you order.\u003c\/p\u003e","brand":"Quick Service","offers":[{"title":"Default Title","offer_id":44860070822205,"sku":"QACWB6565","price":438.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/products\/angledcornerwallbench_978539c0-14f3-4d55-bb30-09913fb6d4d3.jpg?v=1679495306"},{"product_id":"quick-service-1000mm-wide-x-700mm-deep-stainless-steel-angled-corner-wall-bench","title":"Quick Service 1000mm Angled Corner Wall Bench in Stainless Steel","description":"\u003cp\u003eThis angled corner wall bench from Quick Service is a fully welded, free-standing fabrication designed to make practical use of corner space in a commercial kitchen. Constructed with a 304-grade stainless steel worktop on a 430-grade box-section framework, it is built to sit against the wall and integrate cleanly with surrounding counters, cupboards, or back-of-house runs. A welded low-level under-shelf provides usable storage without compromising the structural integrity of the frame.\u003c\/p\u003e\u003cp\u003eIn a working kitchen, corner space is often awkward to use efficiently. This bench addresses that directly — the angled configuration allows staff to work naturally at the junction of two walls, reducing unnecessary movement during service. The worktop features down-stands to each edge and splashbacks to the rear and sides, which helps contain mess and makes the surface easier to wipe down at the end of a shift. The legs are inset from the rear wall to leave clearance for service pipework, which is a consideration that matters on installation day more than it does in a brochure.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned to make productive use of otherwise awkward corner space\u003c\/li\u003e\n\u003cli\u003eSplashbacks to rear and sides reduce cleaning time after service\u003c\/li\u003e\n\u003cli\u003eUnder-shelf keeps essential items accessible without cluttering the worktop\u003c\/li\u003e\n\u003cli\u003eRear leg inset accommodates pipework runs without modification\u003c\/li\u003e\n\u003cli\u003eFlanged levelling feet allow secure mechanical fixing and minor height adjustment\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe bench is set at a standard back-counter height with a degree of adjustment available to suit uneven floors or to align with adjacent equipment. It is wall-sited rather than free-standing in the centre of the room, so it suits kitchens where perimeter workflow is the norm. It is a practical fit for smaller commercial kitchens, cafés, pub kitchens, or any site where a dedicated corner prep or pass area would improve the flow of a shift. Larger or higher-throughput sites may benefit from a heavier-duty or larger fabrication to match the demands of the environment.\u003c\/p\u003e\u003cp\u003eIf you are planning a new kitchen layout or replacing existing fabrications, it is worth discussing the full run of benching before ordering individual pieces — small differences in height, depth, or configuration can cause unnecessary complications on installation. The team is happy to talk through what will work best for your site.\u003c\/p\u003e","brand":"Quick Service","offers":[{"title":"Default Title","offer_id":44860079800637,"sku":"QACWB77","price":438.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/products\/angledcornerwallbench_8daaeadb-457e-4990-870d-83534a6397d1.jpg?v=1679495488"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/collections\/cornerwallbenches.jpg?v=1679490148","url":"https:\/\/www.advantage-catering-equipment.co.uk\/collections\/corner-benches.oembed","provider":"Advantage Catering Equipment","version":"1.0","type":"link"}