{"title":"Filter=\u003eCapacity=\u003eLess Than 5 Litres","description":"","products":[{"product_id":"robot-coupe-r3d-1500t-table-top-cutter","title":"Robot Coupe R3D 1500T Table Top Bowl Cutter Food Processor","description":"\u003cp\u003eThe Robot Coupe R3D 1500T is a table top bowl cutter designed for food preparation in commercial kitchens. It processes a wide range of ingredients — chopping, mixing, pureeing and kneading — and is built around a stainless steel bowl with a transparent lid that allows liquids to be added during operation. The motor base is polycarbonate-housed for durability, and the bowl locks securely in position during use. It comes supplied with a stainless steel flat blade as standard.\u003c\/p\u003e\u003cp\u003eIn a working kitchen environment, the R3D 1500T is well suited to prep tasks at moderate service volumes. It handles raw and cooked ingredients reliably, producing consistent results across repeated batches. The single-speed operation keeps use straightforward, which means any member of the kitchen team can work with it confidently without extensive training. It is commonly used in operations serving up to around 30 covers, where a compact, dependable processor handles daily prep without occupying significant worktop space.\u003c\/p\u003e\u003cp\u003ePractical advantages this unit offers in day-to-day use include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompact footprint suits kitchens with limited worktop space\u003c\/li\u003e\n\u003cli\u003eRemovable, lockable bowl supports safe and repeatable operation\u003c\/li\u003e\n\u003cli\u003eTransparent lid allows ingredient additions without stopping the machine\u003c\/li\u003e\n\u003cli\u003eStraightforward single-speed controls reduce staff training time\u003c\/li\u003e\n\u003cli\u003eStainless steel bowl and blade are robust and easy to clean\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe R3D 1500T is a countertop unit and requires only a standard electrical supply — there are no gas, water or ventilation connections needed. It is worth confirming available worktop space and proximity to a suitable socket before installation. The unit is designed for table top placement rather than floor mounting.\u003c\/p\u003e\u003cp\u003eThis model is best suited to smaller kitchens, cafés, delis, care homes and similar operations where prep volumes are modest and consistency matters. It is a practical entry point into Robot Coupe's bowl cutter range. For operations with higher throughput requirements or larger batch sizes, a higher-capacity model from the same range may be more appropriate.\u003c\/p\u003e\u003cp\u003eIf you are unsure whether this model fits your prep volumes or workflow, we are happy to talk it through before you place an order.\u003c\/p\u003e","brand":"Robot Coupe","offers":[{"title":"Default Title","offer_id":36573883856,"sku":"22383","price":1140.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/products\/Robot_Coupe_R3-1500_Table_Top_Cutter.jpg?v=1599342480"},{"product_id":"robot-coupe-r3d-3000t-table-top-cutter","title":"Robot Coupe R3D 3000T Table Top Bowl Cutter Food Processor","description":"\u003cp\u003eThe Robot Coupe R3D is a compact table top bowl cutter designed for small-scale commercial food preparation. It operates at a single speed of 3000rpm and is built around a stainless steel bowl, making it suitable for a wide range of prep tasks including chopping, mixing, puréeing and kneading. It is a straightforward, reliable piece of kit from a manufacturer with a long-standing reputation in professional kitchens.\u003c\/p\u003e\u003cp\u003eIn a working kitchen environment, the R3D performs well for operations running up to roughly 30 covers. It handles the everyday prep workload — vegetable chopping, sauce work, dips, pastes and soft doughs — efficiently and consistently. The single-speed operation keeps things simple, which is useful when multiple team members are using the machine across a shift.\u003c\/p\u003e\u003cp\u003eFrom a practical standpoint, the machine offers a number of day-to-day operational advantages:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe removable stainless steel bowl locks securely during operation and releases cleanly for washing\u003c\/li\u003e\n\u003cli\u003eThe transparent lid allows liquids to be added without stopping the machine\u003c\/li\u003e\n\u003cli\u003eSingle-touch controls mean minimal training is required for kitchen staff\u003c\/li\u003e\n\u003cli\u003eThe polycarbonate motor base is robust and designed to withstand regular commercial use\u003c\/li\u003e\n\u003cli\u003eThe flat stainless steel blade is included as standard and covers the majority of prep applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBeing a table top unit, the R3D requires only a suitable worktop surface and a standard mains electrical connection — there are no water or gas requirements. It is compact enough to sit alongside other prep equipment without taking up significant workspace, which makes it a practical choice for smaller kitchens where bench space is at a premium. That said, its capacity and throughput are sized for lower-volume operations, and sites running higher covers or more intensive prep schedules should consider whether a larger-bowl or higher-powered model would be a better fit.\u003c\/p\u003e\u003cp\u003eThe R3D is well suited to small restaurants, cafés, hotel breakfast operations, contract catering units and similar environments where consistent prep quality matters but volume does not demand a larger machine. It is also commonly used in healthcare catering settings where texture modification is part of the daily prep requirement.\u003c\/p\u003e\u003cp\u003eIf you are unsure whether the R3D is the right fit for your operation, or if you would like to talk through your prep volume and workflow, the team is happy to help you work through the options.\u003c\/p\u003e","brand":"Robot Coupe","offers":[{"title":"Default Title","offer_id":36573886480,"sku":"22389","price":1205.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/products\/Robot_Coupe_R3-3000_Table_Top_Cutter.jpg?v=1599342480"},{"product_id":"robot-coupe-r4a-mono-1500t-table-top-cutter","title":"Robot Coupe R4A MONO 1500T Table Top Bowl Cutter","description":"\u003cp\u003eThe Robot Coupe R4A MONO is a compact, single-speed table top bowl cutter designed for consistent, high-quality food preparation in professional kitchen environments. It processes a wide range of ingredients — chopping, mixing, kneading and puréeing — using a stainless steel flat blade knife within a 4.5-litre stainless steel bowl. The transparent lid allows liquids to be added safely during operation without stopping the machine.\u003c\/p\u003e\n\n\u003cp\u003eIn a working kitchen, this machine is well suited to the preparation demands of up to around 50 covers. The 1500 rpm single-speed operation is straightforward and dependable, making it easy for any member of the kitchen team to use reliably during prep. Robot Coupe equipment of this type has a long-standing reputation in commercial kitchens for durability and consistency — the polycarbonate motor base is built to handle sustained daily use rather than occasional light work.\u003c\/p\u003e\n\n\u003cp\u003ePractically speaking, the R4A MONO offers several operational advantages:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eSimple single-speed operation reduces the margin for error during busy prep shifts\u003c\/li\u003e\n\u003cli\u003eLockable removable bowl supports safe handling and straightforward cleaning\u003c\/li\u003e\n\u003cli\u003eTransparent lid allows liquid additions without interrupting the process\u003c\/li\u003e\n\u003cli\u003eStainless steel bowl and blade are hygienic and robust under daily commercial use\u003c\/li\u003e\n\u003cli\u003eCompact tabletop footprint suits kitchens where counter space is limited\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eInstallation is uncomplicated — the R4A MONO is a countertop unit requiring only a suitable mains electrical connection. It does not require plumbing, gas supply or extraction. Ensure the worksurface is stable and positioned to allow safe bowl removal. It is worth confirming your available counter space before ordering, as adequate clearance around the unit makes day-to-day use more practical.\u003c\/p\u003e\n\n\u003cp\u003eThis machine is well suited to independent restaurants, hotel kitchens, café operations and contract catering sites operating at small to mid-volume output. For kitchens with significantly higher cover counts or more intensive continuous processing requirements, a larger-capacity model within the Robot Coupe range may be a more practical fit.\u003c\/p\u003e\n\n\u003cp\u003eIf you are unsure whether this model suits your prep volumes or workflow, our team is happy to talk it through with you before you commit to an order.\u003c\/p\u003e","brand":"Robot Coupe","offers":[{"title":"Default Title","offer_id":36573887376,"sku":"22434","price":1293.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/products\/ROB2486.jpg?v=1599342481"},{"product_id":"robot-coupe-r4a-tri-table-top-cutter","title":"Robot Coupe R4A TRI Table Top Bowl Cutter Food Processor","description":"\u003cp\u003eThe Robot Coupe R4A TRI is a table top bowl cutter designed for professional food preparation environments. It processes a wide range of ingredients — chopping, mixing, kneading and pureeing — and is built to deliver consistent results across repeated cycles during a busy service period. The three-phase electrical requirement places it firmly in the commercial kitchen category, and it is not suited to domestic or light-use settings.\u003c\/p\u003e\u003cp\u003eIn day-to-day kitchen operation, this machine is commonly used in kitchens producing up to approximately 50 covers. The two-speed operation allows operators to select the appropriate processing speed for the task — a lower speed for more controlled work and a higher speed where rapid breakdown of ingredients is needed. The stainless steel bowl construction holds up well under regular use, and the locked bowl mechanism during operation keeps the machine safe and consistent in busy environments.\u003c\/p\u003e\u003cp\u003eFrom an operational standpoint, the R4A TRI offers several practical advantages:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo processing speeds to suit different ingredient types and textures\u003c\/li\u003e\n\u003cli\u003eTransparent lid allows liquids to be added during processing without stopping the machine\u003c\/li\u003e\n\u003cli\u003eRemovable stainless steel bowl simplifies cleaning between tasks\u003c\/li\u003e\n\u003cli\u003eLockable bowl provides a consistent and safe processing environment\u003c\/li\u003e\n\u003cli\u003eSimple controls mean most kitchen staff can operate it with minimal training\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBecause this model requires a three-phase electrical supply, it is important to confirm your kitchen has the appropriate connection in place before ordering. Three-phase supplies are standard in most commercial kitchens, but if you are installing in a smaller or older premises, it is worth verifying this with your electrician first. The machine is designed to sit on a worktop, so adequate stable bench space and access for cleaning around the unit should also be considered.\u003c\/p\u003e\u003cp\u003eThe R4A TRI is well suited to restaurants, hotels, contract catering operations and food production kitchens where consistent prep volumes are required daily. It is most practical for kitchens in the 30 to 50 cover range. For sites with significantly higher throughput or larger batch requirements, a larger-capacity model may be worth considering. Conversely, lower-volume kitchens or those without a three-phase supply may find a single-phase alternative more appropriate.\u003c\/p\u003e\u003cp\u003eIf you are unsure whether this machine is the right fit for your prep volumes or your electrical setup, our team is happy to talk it through with you before you commit.\u003c\/p\u003e","brand":"Robot Coupe","offers":[{"title":"Default Title","offer_id":36573887888,"sku":"22437","price":1373.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/products\/Robot_Coupe_R4_Table_Top_Cutter.jpg?v=1599342482"},{"product_id":"robot-coupe-r4vvb-table-top-cutter","title":"Robot Coupe R4VVB Table Top Bowl Cutter Food Processor","description":"\u003cp\u003eThe Robot Coupe R4VVB is a table top bowl cutter designed for professional food preparation in commercial kitchens. It uses a rotating stainless steel knife within a sealed bowl to chop, mix, purée, and knead a wide range of ingredients quickly and consistently. The variable speed control gives operators flexibility across different tasks and textures, from coarsely chopped vegetables to smooth sauces and pastes.\u003c\/p\u003e\u003cp\u003eIn a working kitchen environment, the R4VVB performs reliably across repeated batches throughout a service period. It is commonly used in kitchens producing up to around 30 covers, where consistent prep quality and speed matter but volumes do not yet justify a larger floor-standing unit. The variable speed range means a single machine can handle tasks that might otherwise require separate equipment, which is practical where bench space is limited.\u003c\/p\u003e\u003cp\u003eFrom an operational standpoint, the R4VVB offers several day-to-day advantages:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVariable speed control adapts to different ingredients and desired textures without changing equipment\u003c\/li\u003e\n\u003cli\u003eThe transparent lid allows liquids to be added safely while the machine is running\u003c\/li\u003e\n\u003cli\u003eThe removable bowl locks securely during use, reducing the risk of spillage or operator error\u003c\/li\u003e\n\u003cli\u003eStraightforward touch controls mean most kitchen staff can use it without extensive training\u003c\/li\u003e\n\u003cli\u003eThe polycarbonate motor base is built to withstand the knocks and moisture of a busy prep area\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstallation is straightforward — the R4VVB is a countertop unit requiring a standard mains electrical supply and a stable, level work surface with sufficient clearance around it for safe operation. No specialist fitting or water connection is needed, which makes it easy to deploy in most kitchen environments including smaller sites with limited infrastructure.\u003c\/p\u003e\u003cp\u003eThis model is well suited to independent restaurants, cafés, hotel kitchens, and catering operations producing at small to mid-scale volumes. For sites with higher throughput requirements or larger batch sizes, a higher-capacity bowl cutter or floor-standing model may be a more appropriate choice. Equally, if your prep volumes are modest and a simpler fixed-speed machine would suffice, it is worth considering whether the variable speed functionality represents the right investment for your operation.\u003c\/p\u003e\u003cp\u003eIf you are unsure whether the R4VVB is the right fit for your kitchen's prep requirements, we are happy to talk it through before you commit.\u003c\/p\u003e","brand":"Robot Coupe","offers":[{"title":"Default Title","offer_id":36573891984,"sku":"22412","price":1730.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/products\/Robot_Coupe_R4_VV_Table_Top_Cutter.jpg?v=1599342482"},{"product_id":"robot-coupe-r2ad-table-top-cutter","title":"Robot Coupe R2AD Table Top Bowl Cutter Food Processor","description":"\u003cp\u003eThe Robot Coupe R2AD is a compact table top bowl cutter designed for small-scale food preparation in professional kitchen environments. It processes a wide range of ingredients — chopping, mixing, pureeing and kneading — and is built around the reliability that Robot Coupe equipment is known for in commercial catering. The polycarbonate motor base houses a single-speed operation, and the stainless steel bowl locks securely in place during use. The transparent lid allows liquids to be added while the machine is running, which is a practical detail for sauce and soup preparation.\u003c\/p\u003e\n\n\u003cp\u003eIn a working kitchen, the R2AD earns its place as a consistent, dependable prep tool. It is best suited to operations processing moderate volumes rather than high-output production kitchens. For sites serving up to around 20 covers, it handles daily prep requirements reliably without taking up significant bench space. Recovery between batches is straightforward, and the single-speed motor keeps operation simple for any member of the kitchen brigade to use confidently.\u003c\/p\u003e\n\n\u003cp\u003eThe practical advantages of this unit for a small kitchen team include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimple, single-speed operation reduces training time and user error\u003c\/li\u003e\n\u003cli\u003eLocking bowl mechanism ensures safe, stable processing\u003c\/li\u003e\n\u003cli\u003eTransparent lid allows ingredients to be added mid-process without stopping\u003c\/li\u003e\n\u003cli\u003eRemovable stainless steel bowl supports fast cleaning between batches\u003c\/li\u003e\n\u003cli\u003eCompact footprint suits kitchens where bench space is limited\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAs a table top unit, the R2AD requires only a standard mains socket and a clear area of worktop. There are no special installation requirements, which makes it straightforward to integrate into an existing kitchen setup. It is worth considering that this is a single-speed machine with a smaller bowl capacity, so operators running high-volume prep or processing particularly large batches regularly may find the throughput limiting.\u003c\/p\u003e\n\n\u003cp\u003eThe R2AD is well suited to small restaurants, cafés, hotel kitchens with modest covers, and catering operations where bench-top food processing is needed without the footprint or output of a larger machine. For higher-volume kitchens or those with more demanding production requirements, a larger-capacity Robot Coupe model in the range may be worth considering.\u003c\/p\u003e\n\n\u003cp\u003eIf you are weighing up whether this unit matches your prep volumes and menu requirements, we are happy to talk it through before you commit to a purchase.\u003c\/p\u003e","brand":"Robot Coupe","offers":[{"title":"Default Title","offer_id":36573894736,"sku":"22107D","price":940.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/products\/Robot_Coupe_R2_Table_Top_Cutter_ec9af66b-1021-46a9-930e-f4e28706e055.jpg?v=1599342484"},{"product_id":"sammic-k-41-food-processor","title":"Sammic K-41 Food Processor – 4.4 Litre Commercial Bowl Cutter","description":"\u003cp\u003eThe Sammic K-41 is a compact bowl cutter designed for commercial food preparation environments. It handles a broad range of tasks — chopping, mashing, mixing, kneading and emulsifying — within a single countertop unit. The 4.4 litre removable bowl makes it a practical choice for kitchens where prep volumes are moderate and bench space is at a premium.\u003c\/p\u003e\n\n\u003cp\u003eIn a working kitchen, the K-41 earns its place during prep sessions where speed and consistency matter. Variable speed control via the electronic panel allows operators to match the machine's output to the texture requirements of the product being processed — coarser for vegetable mixes, finer for sauces or emulsions. The lid incorporates a fill aperture so liquids can be added during processing without stopping the machine, which helps maintain workflow during busy prep periods.\u003c\/p\u003e\n\n\u003cp\u003eThe practical advantages for a prep kitchen include:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eRemovable bowl for straightforward cleaning and direct transfer to other workstations\u003c\/li\u003e\n\u003cli\u003eVariable speed control to suit a range of food textures and processing requirements\u003c\/li\u003e\n\u003cli\u003eLiquid feed aperture in the lid to allow continuous operation when incorporating dressings or emulsions\u003c\/li\u003e\n\u003cli\u003eCompact footprint suited to kitchens with limited worktop space\u003c\/li\u003e\n\u003cli\u003eFlat blade included as standard for general-purpose chopping and mixing tasks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eInstallation is straightforward — the K-41 is a countertop unit requiring a suitable mains power supply and a stable, clear workspace. It does not require any specialist plumbing or ventilation provision. Cleaning is made easier by the removable bowl design, which supports basic food hygiene requirements in a commercial setting.\u003c\/p\u003e\n\n\u003cp\u003eThe K-41 is well suited to smaller kitchens, café operations, deli counters and catering businesses where a reliable general-purpose food processor is needed without the footprint or throughput demands of a larger machine. For operations processing significantly higher volumes or requiring extended continuous use, a higher-capacity model from the range may be worth considering.\u003c\/p\u003e\n\n\u003cp\u003eIf you're unsure whether the K-41 is the right fit for your prep volume or kitchen setup, the team is happy to talk it through with you before you order.\u003c\/p\u003e","brand":"Sammic","offers":[{"title":"Default Title","offer_id":36573894928,"sku":"1050982","price":701.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/products\/SammicK-41.jpg?v=1620386454"},{"product_id":"robot-coupe-blixer-4a-mono-blender-mixer","title":"Robot Coupe Blixer 4A Mono Blender Mixer 4.5 Litre","description":"\u003cp\u003eThe Robot Coupe Blixer 4A is a single-speed blender mixer designed for kitchens that need to process individual portions or small batches quickly and consistently. It sits somewhere between a conventional blender and a food processor — blending and mixing in the same bowl without the need to transfer ingredients between pieces of equipment. The stainless steel bowl accommodates batches from a single portion up to around 2.5 kg, making it a practical workhorse for kitchens producing food at moderate volume.\u003c\/p\u003e\u003cp\u003eIn a working kitchen environment, the Blixer 4A is commonly found in healthcare catering, care homes, and hospital kitchens where texture-modified meals need to be prepared reliably and hygienically across a service. The fixed 3000rpm motor delivers consistent results without requiring operator adjustment, and the pulse function gives precise control when a full processing cycle would over-blend the mixture. The magnetic safety system ensures the machine won't run unless the bowl and lid are correctly seated — a practical safeguard in a busy prep kitchen.\u003c\/p\u003e\u003cp\u003eKey operational advantages include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProcesses wet and dry foods in the same bowl, reducing washing-up and cross-contamination risk\u003c\/li\u003e\n\u003cli\u003ePolycarbonate lid with integrated scraper keeps ingredients in contact with the blade throughout the cycle\u003c\/li\u003e\n\u003cli\u003eStainless steel bowl and knife are robust and straightforward to clean to food-safe standards\u003c\/li\u003e\n\u003cli\u003eCompact footprint suits smaller prep areas without sacrificing usable bowl capacity\u003c\/li\u003e\n\u003cli\u003eSuitable for sauces, mousses, butter mixtures, and tube-feeding food preparation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstallation is straightforward — the Blixer 4A runs on single-phase power, so no specialist electrical supply is required beyond a standard commercial socket. There are no water connections or ventilation requirements. The machine is bench-mounted, and the compact dimensions mean it fits comfortably on most prep counters. It is worth confirming the available worktop space and socket position before ordering.\u003c\/p\u003e\u003cp\u003eThe Blixer 4A is well suited to kitchens serving up to around 100 covers, or to any operation where small-batch blending and mixing is a regular part of the prep workflow. It is particularly practical for healthcare and care catering environments. For higher-volume sites processing larger quantities continuously throughout service, a larger-capacity model from the Blixer range may be worth considering.\u003c\/p\u003e\u003cp\u003eIf you're unsure whether the Blixer 4A is the right fit for your kitchen's output and menu requirements, we're happy to talk it through with you.\u003c\/p\u003e","brand":"Robot Coupe","offers":[{"title":"Default Title","offer_id":36574342352,"sku":"33209","price":1391.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/products\/Robot_Coupe_Blixer_4-3000_Blender_Mixer.jpg?v=1599362401"},{"product_id":"robot-coupe-blixer-4a-tri-three-phase-blender-mixer","title":"Robot Coupe Blixer 4A Tri Three Phase Blender Mixer 4.5L","description":"\u003cp\u003eThe Robot Coupe Blixer 4A is a combined blender and mixer designed for commercial kitchens and healthcare catering operations that need to process single portions or small batches with consistent, repeatable results. The 4.5 litre stainless steel bowl handles portions from around 200g up to 1.5kg, making it a practical fit for operations producing sauces, mousses, purées, butter mixtures, and texture-modified meals for patients with dysphagia or swallowing difficulties. The tri designation refers to the three-phase electrical supply this model requires.\u003c\/p\u003e\n\n\u003cp\u003eIn service, the Blixer 4A is well regarded for its ability to move between wet and dry ingredients without changing attachments or bowls. The dual-speed motor — running at two distinct RPM settings with a pulse function — gives operators control over texture, which matters considerably when preparing dishes to specific consistency standards, whether for a restaurant kitchen or a healthcare setting. Robot Coupe has developed the Blixer concept in close collaboration with healthcare and catering specialists since the early 1990s, and that background is evident in how the machine handles ingredient blending at a practical level.\u003c\/p\u003e\n\n\u003cp\u003eKey operational advantages include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFine serrated stainless steel knife blade included as standard for immediate use\u003c\/li\u003e\n\u003cli\u003eMagnetic safety system and motor brake prevent operation unless the bowl is correctly seated\u003c\/li\u003e\n\u003cli\u003ePolycarbonate lid with a watertight seal and centre fill port for adding ingredients mid-cycle\u003c\/li\u003e\n\u003cli\u003eStainless steel bowl construction supports thorough cleaning and withstands daily use\u003c\/li\u003e\n\u003cli\u003eDual speed plus pulse gives precise control over finished texture\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe Blixer 4A requires a three-phase electrical connection, which is worth confirming before purchase. This is not a standard single-phase domestic or light-commercial supply, and installation will need to be verified with your electrician or facilities team. The machine is compact enough for a prep bench or dedicated workstation but is not intended for countertop use alongside other heavy equipment without adequate space. No gas or water connections are required.\u003c\/p\u003e\n\n\u003cp\u003eThis model is commonly used in hospital and care home catering, restaurant prep kitchens producing up to around 100 covers, and food production environments preparing small-batch wet or semi-liquid foods. For operations with significantly higher throughput or larger batch requirements, a larger-bowl or higher-capacity model would be worth considering. Equally, if your service volume is modest or you only need occasional blending, a smaller single-phase unit may be a more practical choice.\u003c\/p\u003e\n\n\u003cp\u003eIf you are unsure whether the Blixer 4A suits your setup — particularly around electrical supply or batch size — our team is happy to talk it through with you before you commit to an order.\u003c\/p\u003e","brand":"Robot Coupe","offers":[{"title":"Default Title","offer_id":36574348176,"sku":"33215","price":1449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/products\/Robot_Coupe_Blixer_4_Three_Phase_Blender_Mixer.jpg?v=1599362402"},{"product_id":"robot-coupe-blixer-4vvb-blender-mixer","title":"Robot Coupe Blixer 4VVB Blender Mixer – Commercial Food Processor","description":"\u003cp\u003eThe Robot Coupe Blixer 4VVB is a combined blender and mixer designed specifically for processing single-portion meals and semi-liquid preparations in a commercial or healthcare catering environment. Unlike a standard blender, the Blixer concept allows operators to work with both wet and dry ingredients in a single machine, producing smooth, consistent results without the need to transfer between pieces of equipment. The 4VVB model operates on a variable-speed motor running from 300 to 3,000rpm, with a pulse function for additional control over texture and consistency.\u003c\/p\u003e\u003cp\u003eIn practice, the Blixer 4VVB is most commonly found in healthcare kitchens, hospital catering facilities, and care home environments where the preparation of texture-modified food is a daily requirement. Robot Coupe has been developing the Blixer range in partnership with healthcare and catering specialists since the early 1990s, and that experience shows in the design. The machine handles the blend-to-plate cycle efficiently, processing portions in the 200g to 1.5kg range with reliable results across repeated service cycles. The variable speed and pulse control give kitchen staff the means to hit specific texture targets consistently, which matters when preparing food for patients with dysphagia or swallowing difficulties.\u003c\/p\u003e\u003cp\u003eFrom an operational standpoint, the 4VVB offers several practical advantages:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVariable speed and pulse control support precise texture management across a range of food types\u003c\/li\u003e\n\u003cli\u003eStainless steel bowl with a watertight polycarbonate lid reduces spillage risk during operation\u003c\/li\u003e\n\u003cli\u003eCentre lid opening allows ingredients to be added without stopping the machine\u003c\/li\u003e\n\u003cli\u003eMagnetic safety system and motor brake reduce the risk of accidental operation\u003c\/li\u003e\n\u003cli\u003eFine serrated stainless steel knife is included as standard\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe unit is a countertop machine and requires a standard single-phase power supply. As with all food processing equipment of this type, stable positioning on a firm surface is important during use given the torque generated at higher speeds. The bowl and lid assembly should be considered when planning worktop space, particularly in smaller prep areas. Cleaning is straightforward, and the stainless steel bowl and knife assembly are designed to be disassembled without tools.\u003c\/p\u003e\u003cp\u003eThe Blixer 4VVB is well suited to healthcare catering operations, care homes, hospital kitchens, and any facility preparing texture-modified or tube-feeding meals as a regular part of service. It is also used in smaller hospitality kitchens for sauces, mousses, and butter-based preparations where a single-portion approach is appropriate. For operations requiring higher-volume batch processing or larger bowl capacity, heavier-duty models in the Robot Coupe range may be a better fit.\u003c\/p\u003e\u003cp\u003eIf you are unsure whether the 4VVB is the right specification for your kitchen's output requirements, the team is happy to talk through your service volumes and preparation needs before you order.\u003c\/p\u003e","brand":"Robot Coupe","offers":[{"title":"Default Title","offer_id":36574349264,"sku":"33281","price":1806.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/products\/Robot_Coupe_Blixer_4_VV_Blender_Mixer.jpg?v=1599362402"},{"product_id":"robot-coupe-blixer-2-blender-mixer","title":"Robot Coupe Blixer 2 Blender Mixer – Commercial 2.9L","description":"\u003cp\u003eThe Robot Coupe Blixer 2 is a compact blender-mixer designed specifically for commercial and healthcare catering environments where single-portion processing is required. Unlike a standard blender, the Blixer combines the cutting action of a blender with the mixing capability of a food processor, allowing operators to work with both wet and semi-liquid preparations in a single machine. The 2.9-litre stainless steel bowl is sized for portions rather than large batches, making it a precise, controlled tool rather than a bulk processor.\u003c\/p\u003e\n\n\u003cp\u003eIn service, the Blixer 2 handles tasks such as sauces, mousses, puréed foods, butter mixtures, and finely ground preparations. It is particularly well established in healthcare and care catering settings where texture-modified meals are required for patients with dysphagia or swallowing difficulties — Robot Coupe has been developing the Blixer concept in partnership with healthcare specialists for decades. Beyond healthcare, it is used in smaller restaurant kitchens and prep areas where volume does not justify a full-size bowl cutter but consistency and build quality still matter.\u003c\/p\u003e\n\n\u003cp\u003ePractical advantages that operators notice in daily use include:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eStainless steel bowl with a sealed, tight-fitting polycarbonate lid that prevents spills during operation\u003c\/li\u003e\n\u003cli\u003eA centre cover on the lid allows ingredients to be added while the machine is running\u003c\/li\u003e\n\u003cli\u003eMagnetic safety system prevents the motor from operating unless the bowl is correctly seated\u003c\/li\u003e\n\u003cli\u003eMotor brake stops the blade promptly when the machine is switched off, reducing handling risk\u003c\/li\u003e\n\u003cli\u003eFine serrated stainless steel knife included as standard, suitable for a broad range of textures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eInstallation is straightforward — the Blixer 2 is a countertop unit requiring only a standard electrical supply and adequate worktop space. It is designed to be portable between prep stations if needed. There are no water, gas, or ventilation requirements. The compact footprint suits smaller prep areas, though operators should be aware the 2.9-litre bowl capacity makes it most practical for individual portions or small quantities rather than large-batch production.\u003c\/p\u003e\n\n\u003cp\u003eThe Blixer 2 is best suited to care homes, hospital catering, smaller restaurant kitchens, and specialist diet preparation where single-portion accuracy and reliable blending of semi-liquid foods are priorities. It is not intended for high-volume batch work — for operations producing larger quantities in a single pass, a larger-capacity Blixer or bowl cutter would be a more appropriate fit.\u003c\/p\u003e\n\n\u003cp\u003eIf you are unsure whether the Blixer 2 matches your production requirements, or you would like to discuss texture-modification workflows or portion volumes, we are happy to help you work through the options before you commit.\u003c\/p\u003e","brand":"Robot Coupe","offers":[{"title":"Default Title","offer_id":36574353808,"sku":"33232D","price":1224.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/products\/Robot_Coupe_Blixer_2_Blender_Mixer.jpg?v=1599362404"},{"product_id":"robot-coupe-blixer-3d-blender-mixer","title":"Robot Coupe Blixer 3D Commercial Blender Mixer","description":"\u003cp\u003eThe Robot Coupe Blixer 3D is a compact combination blender and mixer designed to process single portions in a stainless steel bowl. Rather than choosing between a blender and a mixer, the Blixer handles both tasks in one unit — blending raw or cooked ingredients to smooth, semi-liquid, or textured consistencies depending on what the application requires. It is commonly used in catering operations where portion-by-portion preparation is the norm, and has a well-established role in healthcare and hospital catering where texture-modified diets are part of daily service.\u003c\/p\u003e\u003cp\u003eIn practical kitchen use, the Blixer 3D handles a wide range of tasks cleanly and consistently. It manages wet and dry ingredients equally well — sauces, mousses, butter mixtures, smooth purées, and finely ground preparations all fall within its capable range. The single-speed motor runs at 3000rpm with a pulse function, giving operators direct control over texture without overprocessing. The magnetic safety system prevents the unit operating unless the bowl is correctly seated, and the motor brake stops the blade quickly when the lid is removed — both features that matter in a busy kitchen environment.\u003c\/p\u003e\u003cp\u003eOperationally, the Blixer 3D offers several practical advantages:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCombines blending and mixing in a single compact unit, reducing equipment clutter\u003c\/li\u003e\n\u003cli\u003eStainless steel bowl with a watertight polycarbonate lid keeps preparation contained and clean\u003c\/li\u003e\n\u003cli\u003eCentre cover allows ingredients to be added during processing without stopping the machine\u003c\/li\u003e\n\u003cli\u003eFine serrated stainless steel knife included, suited to both wet and dry ingredients\u003c\/li\u003e\n\u003cli\u003ePulse function gives precise texture control without relying on fixed programmes\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe unit is designed for benchtop use and requires only a standard single-phase electrical supply. As a compact machine, it fits comfortably in most kitchen layouts without dedicated counter space. It is worth noting that this model is suited to kitchens producing up to around 30 covers; for higher-volume operations processing larger batch quantities, a higher-capacity model in the Robot Coupe range would likely be more appropriate.\u003c\/p\u003e\u003cp\u003eThe Blixer 3D is a practical choice for small to medium catering operations, café kitchens, and healthcare or care home catering where texture-modified meals are regularly prepared. It handles the kind of portion-by-portion work that larger batch machines are not well suited to, and its straightforward operation makes it accessible for kitchen teams without specialist training.\u003c\/p\u003e\u003cp\u003eIf you are unsure whether this model fits your service volumes or preparation requirements, we are happy to talk through the options with you before you commit to a purchase.\u003c\/p\u003e","brand":"Robot Coupe","offers":[{"title":"Default Title","offer_id":36574354896,"sku":"33198","price":1304.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/products\/Robot_Coupe_Blixer_3_Blender_Mixer.jpg?v=1599362405"},{"product_id":"instanta-wmsp3w-wm3-3-ltr-wall-mounted-water-boiler","title":"Instanta WMSP3W (WM3) 3 Litre Wall Mounted Water Boiler","description":"\u003cp\u003eThe Instanta WMSP3W, commonly referred to as the WM3, is a compact auto-fill wall mounted water boiler designed for commercial and catering environments where counter space is limited but reliable hot water on demand is essential. Wall mounting keeps it clear of the worktop entirely, which is a practical advantage in tight service areas, staff rooms, or hospitality beverage stations.\u003c\/p\u003e\u003cp\u003eIn daily operation, the auto-fill function means staff do not need to manually top up the unit — it draws from a mains water connection and maintains its own level, making it well suited to continuous service throughout the day. The built-in 7-day programmable timer allows operators to schedule heating cycles around their service hours, so the boiler is at temperature when needed and not drawing energy overnight or during closing periods.\u003c\/p\u003e\u003cp\u003eFrom a practical standpoint, the WM3 offers a number of operational advantages worth noting:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWall-mounted design frees up counter and worktop space entirely\u003c\/li\u003e\n\u003cli\u003eAuto-fill operation reduces staff intervention during service\u003c\/li\u003e\n\u003cli\u003eProgrammable timer helps manage energy use around service hours\u003c\/li\u003e\n\u003cli\u003eFilter change indicator prompts timely maintenance without guesswork\u003c\/li\u003e\n\u003cli\u003eOnboard diagnostics alert operators to performance issues early\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstallation requires a mains cold water connection and an appropriate power supply — a hardwired connection is generally recommended over a standard 13A plug for permanent installations, and this should be confirmed with a qualified electrician before fitting. The wall mounting point needs to be structurally sound and accessible for servicing. Water quality in your area may affect filter life and descaling frequency, so this is worth factoring into your maintenance planning.\u003c\/p\u003e\u003cp\u003eWith a 3-litre capacity, the WM3 is best suited to lower-volume outlets: small cafés, office kitchens, hotel rooms, staff canteens, or secondary beverage stations rather than a high-volume main service counter. For busier sites with heavier continuous demand, a larger-capacity unit is likely to be a better fit.\u003c\/p\u003e\u003cp\u003eIf you are unsure whether this model matches your expected throughput or have questions about the installation requirements for your site, we are happy to talk it through.\u003c\/p\u003e","brand":"Instanta","offers":[{"title":"Default Title","offer_id":36575987344,"sku":"WMSP3W","price":590.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/products\/wmsp3w_1.jpg?v=1634746777"},{"product_id":"instanta-wms2-wa2n-2-5-ltr-wall-mounted-water-boiler","title":"Instanta WMS2 (WA2N) 2.5 Ltr Wall Mounted Water Boiler","description":"\u003cp\u003eThe Instanta WMS2 is a compact, auto-fill wall mounted water boiler with a 2.5 litre capacity, designed to provide a continuous supply of hot water directly from the mains. It is intended for commercial settings where counter or floor space is at a premium but reliable hot water access is still essential.\u003c\/p\u003e\u003cp\u003eBecause it is auto-fill, it draws directly from the mains supply and maintains a ready reservoir without any manual refilling, which reduces interruption during service.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFrees up counter space entirely — the unit sits clear of the work surface\u003c\/li\u003e\n\u003cli\u003eStainless steel casing is straightforward to wipe down and maintain hygienically\u003c\/li\u003e\n\u003cli\u003eNon-drip tap reduces spillage at the point of dispense\u003c\/li\u003e\n\u003cli\u003eMains-fed auto-fill removes the need for manual water management during service\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstallation requires a mains cold water connection and an appropriate power supply. The WMS2 is most appropriate for smaller operations or secondary service points within larger sites.\u003c\/p\u003e\u003cp\u003eIf you are unsure whether this capacity suits your service volume or have questions about the installation requirements, the team is happy to talk it through with you before you order.\u003c\/p\u003e","brand":"Instanta","offers":[{"title":"Default Title","offer_id":36575991248,"sku":"WMS2","price":506.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/products\/wms2_1.jpg?v=1634746759"},{"product_id":"sirman-c-tronic-4vt-food-processor","title":"Sirman C-TRONIC 4VT Food Processor","description":"\u003cp\u003eThe Sirman C-TRONIC 4VT is a compact bowl-type food processor designed for commercial food preparation tasks including chopping, puréeing, emulsifying and blending. It is built around a stainless steel bowl with robust side and base handles, a ventilated motor housing kept separate from the bowl, and a clear lid fitted with a feed opening that allows ingredients to be added while the machine is running. Controls are straightforward, making it practical in kitchens where multiple staff members will use the machine.\u003c\/p\u003e\u003cp\u003eIn a working kitchen environment, the C-TRONIC 4VT suits prep sessions where consistent, repeatable results matter — stocks and sauces, herb mixes, mayonnaise bases and vegetable purées. The motor housing is positioned away from the bowl, which helps limit heat transfer to the food during extended processing runs. This is a useful consideration for temperature-sensitive preparations. The machine is built by Sirman, an Italian manufacturer with a long-standing presence in commercial catering equipment, and the construction quality reflects that heritage.\u003c\/p\u003e\u003cp\u003ePractical advantages for kitchen operators include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFeed opening in the lid allows continuous addition of ingredients without stopping the machine\u003c\/li\u003e\n\u003cli\u003eStainless steel bowl with sturdy handles supports safe handling during service\u003c\/li\u003e\n\u003cli\u003eSeparated motor housing reduces unwanted heat build-up in processed food\u003c\/li\u003e\n\u003cli\u003eSimple controls reduce training time for kitchen staff\u003c\/li\u003e\n\u003cli\u003eCompact footprint suits kitchens with limited worktop space\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe C-TRONIC 4VT is a countertop unit and requires a standard single-phase electrical supply. It should be positioned on a stable, level surface with reasonable clearance around the unit for ventilation. As with all bowl processors, cleaning between preparations is straightforward, though operators should factor in time for disassembly and reassembly during busy service periods.\u003c\/p\u003e\u003cp\u003eThis model is well suited to smaller independent restaurants, café kitchens, hotel prep areas, and catering operations where daily prep volumes are moderate. It is not intended for continuous high-volume batch processing — for sites with substantially heavier throughput demands, a larger-capacity processor would be a more appropriate choice.\u003c\/p\u003e\u003cp\u003eIf you are unsure whether this model fits your prep volumes or workflow, we are happy to talk it through before you commit.\u003c\/p\u003e","brand":"Sirman","offers":[{"title":"Default Title","offer_id":36576035920,"sku":"C-TRONIC 4VT","price":984.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/products\/C-TRONIC-4VT.jpg?v=1641993773"},{"product_id":"sirman-blitz-food-processor","title":"Sirman BLITZ Compact Food Processor","description":"\u003cp\u003eThe Sirman BLITZ is a compact bowl cutter and food processor designed for commercial prep environments. It handles chopping, mixing, and emulsifying using a stainless steel cutting knife and an ABS emulsifying knife, with a spatula included as standard. The polycarbonate bowl and lid are built for repeated daily use, and the base unit is constructed from thermo-resistant ABS plastic.\u003c\/p\u003e\u003cp\u003eIn a working kitchen, the BLITZ suits prep stations where speed and consistency matter but space is limited. The lid includes a feed opening, allowing ingredients to be added while the unit is running — a practical detail that reduces unnecessary downtime during prep. A micro switch interlock prevents the unit operating unless the bowl and lid are correctly seated, which is the expected safety standard for professional equipment of this type.\u003c\/p\u003e\u003cp\u003ePractical advantages for kitchen operators include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFeed opening in the lid allows ingredients to be added during operation\u003c\/li\u003e\n\u003cli\u003eMicro switch interlock ensures safe use without operator intervention\u003c\/li\u003e\n\u003cli\u003eBowl is removable for straightforward cleaning between batches\u003c\/li\u003e\n\u003cli\u003eCompact footprint suits smaller prep areas and mobile prep stations\u003c\/li\u003e\n\u003cli\u003eTwo knife attachments give flexibility across chopping and emulsifying tasks\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis unit is suited to smaller operations — cafés, deli counters, small restaurant kitchens, or as a secondary prep machine in a larger kitchen. It is not intended for high-volume continuous processing; for sites running extended prep cycles or larger batch volumes, a higher-capacity bowl cutter would be the more appropriate choice.\u003c\/p\u003e\u003cp\u003eIf you are unsure whether the BLITZ is the right fit for your prep requirements or workflow, we are happy to talk it through before you order.\u003c\/p\u003e","brand":"Sirman","offers":[{"title":"Default Title","offer_id":36577291216,"sku":"BLITZ","price":516.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/products\/Sirman_BLITZ_Food_Processor.jpg?v=1580238865"},{"product_id":"robot-coupe-r-cook","title":"Robot Coupe R Cook Heated Food Processor","description":"\u003cp\u003eThe Robot Coupe R Cook is a heated food processor designed for professional kitchen use. It combines the cutting, blending, emulsifying, mixing, chopping, grinding and kneading functions expected of a high-performance bowl cutter with an integrated heating capability — allowing operators to cook and process within the same unit. This makes it a practical choice for kitchens producing sauces, soups, emulsified preparations, purees and cooked garnishes that would otherwise require separate cooking and blending steps.\u003c\/p\u003e\u003cp\u003eIn a busy service environment, the R Cook's ability to heat and process simultaneously can meaningfully reduce the number of pots, pans and pieces of equipment in use at any one time. The heating function allows temperature to be controlled with a high degree of accuracy, which is particularly useful when working with preparations that are sensitive to overheating. The R-Mix function — which uses inverse blade rotation — allows delicate ingredients to be incorporated without being cut, broadening the range of textures achievable. At higher speeds, the machine handles thorough emulsification and fine blending with consistency across batches.\u003c\/p\u003e\u003cp\u003eFrom an operational standpoint, key practical advantages include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCombined cooking and processing in a single unit, reducing equipment footprint\u003c\/li\u003e\n\u003cli\u003eProgrammable recipe storage for consistent, repeatable results across kitchen shifts\u003c\/li\u003e\n\u003cli\u003eInverse blade rotation for gentle mixing of fragile preparations\u003c\/li\u003e\n\u003cli\u003eIntermittent function to maintain temperature between processing stages\u003c\/li\u003e\n\u003cli\u003eLow operating noise, which operators in open or semi-open kitchens often appreciate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstallation is relatively straightforward — the R Cook is a countertop unit requiring a suitable worktop position with adequate clearance, a standard electrical supply, and access to cleaning facilities. As with all bowl processors, the bowl and blade assembly should be handled carefully during cleaning and maintenance. Operators should review the required electrical specification with their installation team before commissioning.\u003c\/p\u003e\u003cp\u003eThe R Cook is well suited to restaurants, hotel kitchens, catering operations and healthcare catering where both cooking and precision processing are needed in a single unit. It is particularly useful where consistency across service periods matters — the programmable function helps kitchen teams reproduce results reliably regardless of who is preparing a dish. For very high-volume production environments requiring larger batch capacity, a heavier-duty or larger-bowl alternative may be worth considering.\u003c\/p\u003e\u003cp\u003eIf you're unsure whether the R Cook is the right fit for your workflow or production volume, our team is happy to talk through your requirements before you commit.\u003c\/p\u003e","brand":"Robot Coupe","offers":[{"title":"Default Title","offer_id":36578339344,"sku":"43001R","price":2261.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/products\/Robot_Coupe_Robot_Cook.jpg?v=1599396535"},{"product_id":"instanta-cts3-1000-m-3-ltr-water-boiler","title":"Instanta CTS3 (1000-M) 3 Litre Counter Top Water Boiler","description":"\u003cp\u003eThe Instanta CTS3 (1000-M) is a compact counter top water boiler with a 3-litre capacity, designed for commercial and semi-commercial environments where a consistent supply of hot water is needed without dedicating significant counter space or requiring a dedicated electrical circuit. It operates from a standard 13-amp plug, which makes it straightforward to position wherever it is most useful.\u003c\/p\u003e\n\n\u003cp\u003eIn practice, a unit of this size is well suited to low-to-moderate demand situations — think a busy front-of-house drinks station in a café, a hotel servery, a staff canteen, or a takeaway operation that needs reliable hot water for beverages and light food preparation throughout the day. It is not intended for high-throughput kitchen environments that are drawing hot water continuously at volume; in those settings a larger-capacity plumbed-in boiler would be the more appropriate choice.\u003c\/p\u003e\n\n\u003cp\u003eThe practical advantages of this unit come from its simplicity and reliability rather than its output volume:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncoloy heating element provides long-term durability under regular daily use\u003c\/li\u003e\n\u003cli\u003eInsulated body reduces heat loss between draws, helping to lower running costs\u003c\/li\u003e\n\u003cli\u003eIntegrated drip tray keeps the counter clean and simplifies hygiene routines\u003c\/li\u003e\n\u003cli\u003eSelf-diagnostics help identify faults early, reducing unexpected downtime\u003c\/li\u003e\n\u003cli\u003eStainless steel construction meets commercial hygiene standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eBecause it runs from a 13-amp plug with a 1.75-metre cable, there are no installation prerequisites beyond a suitable socket in a safe, accessible position. It is a counter top unit, so adequate bench space and a stable, level surface are the primary practical requirements. There is no plumbing connection on this model — it is a fill-and-go unit, which suits operations where a plumbed supply is not available or practical, but does mean the tank needs manual refilling.\u003c\/p\u003e\n\n\u003cp\u003eThis boiler is best suited to lower-volume sites — cafés, offices, small hospitality operations, and similar environments where demand is steady but not extreme. For busier sites drawing hot water at pace throughout a full service period, it is worth considering whether a higher-capacity auto-fill model would be a better long-term fit.\u003c\/p\u003e\n\n\u003cp\u003eIf you are unsure whether the CTS3 matches your expected demand, the team is happy to talk through your usage before you commit.\u003c\/p\u003e","brand":"Instanta","offers":[{"title":"Default Title","offer_id":39556669177916,"sku":"CTS3","price":455.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/products\/cts3_1.jpg?v=1635414820"},{"product_id":"instanta-wmsp3-wm3ss-3-ltr-wall-mounted-water-boiler","title":"Instanta WMSP3 3 Litre Wall Mounted Auto-Fill Water Boiler","description":"\u003cp\u003eThe Instanta WMSP3 is a compact, wall-mounted auto-fill water boiler designed for continuous hot water provision in commercial environments. Plumbed directly into a mains water supply, it removes the need for manual filling and keeps hot water available throughout service without occupying counter or worktop space.\u003c\/p\u003e\u003cp\u003eFor lower-volume sites — a small café, a staffroom, a bakery counter, or a compact hotel breakfast station — the 3-litre capacity handles a steady throughput of hot beverages and light food preparation tasks without difficulty. It is well suited to environments where demand is consistent rather than intense, and where space is a genuine constraint. Sites running high-volume continuous service or large-batch catering operations would be better served by a higher-capacity boiler.\u003c\/p\u003e\u003cp\u003eIn day-to-day operation, a few features make a practical difference:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eA 7-day programmable timer allows the boiler to heat only during operational hours, which reduces unnecessary energy use across the week.\u003c\/li\u003e\n\u003cli\u003eElectronic temperature control maintains consistent water temperature throughout service.\u003c\/li\u003e\n\u003cli\u003eA programmable filter change indicator prompts maintenance at the right interval, helping protect both water quality and the boiler's internal components.\u003c\/li\u003e\n\u003cli\u003eAn onboard diagnostics system flags issues early, reducing the likelihood of unexpected downtime during service.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstallation requires a mains cold water connection and an appropriate power supply. The wall-mounted format is well suited to kitchens where bench space is limited, but the fixing position needs to allow reasonable access for filter servicing and routine maintenance. It is worth confirming your water pressure and plumbing arrangement are compatible before ordering.\u003c\/p\u003e\u003cp\u003eIf you are unsure whether this model is the right fit for your service volume or setup, the team is happy to talk it through before you commit.\u003c\/p\u003e","brand":"Instanta","offers":[{"title":"Default Title","offer_id":39566498463804,"sku":"WMSP3","price":665.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/products\/wmsp3_1.jpg?v=1635871713"},{"product_id":"hamilton-beach-commercial-hbf1100sr-uk-large-capacity-3-5-hp-expeditor-food-blender","title":"Hamilton Beach HBF1100SR-UK 3.5HP Expeditor Commercial Blender","description":"\u003cp\u003eThe Hamilton Beach Commercial HBF1100SR-UK Expeditor is a high-output countertop blender built specifically for commercial food and beverage preparation. Driven by a 3.5 HP motor, it is designed to handle dense and demanding blending tasks consistently across a full service period, from smoothies and soups to sauces and frozen drinks.\u003c\/p\u003e\n\n\u003cp\u003eIn a working kitchen or bar environment, blender reliability under repeated use is often underestimated. The Expeditor is built with thermal protection to prevent motor overheating during heavy continuous use, which is a practical safeguard in sites where the blender is running through a busy lunch or evening service. The combination of programmable preset cycles and variable speed control means operators can replicate consistent results for signature recipes without having to manage each blend manually.\u003c\/p\u003e\n\n\u003cp\u003eFrom an operational standpoint, several design features translate directly into faster, more reliable service:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eProgrammable presets allow automation of repeatable recipes, freeing the operator during peak periods\u003c\/li\u003e\n\u003cli\u003eThe CHOP function pulses between speeds to maintain ingredient movement and give finer control over texture\u003c\/li\u003e\n\u003cli\u003eLid interlock prevents operation unless the jar and lid are correctly seated, reducing spillage risk\u003c\/li\u003e\n\u003cli\u003eTransparent lid and dosing cup allow visual monitoring without stopping the blend cycle\u003c\/li\u003e\n\u003cli\u003eWeighted die-cast aluminium base with non-skid feet provides stability on a busy pass or prep counter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe Expeditor is a countertop unit and requires a standard UK power supply. Its low-profile design is intentional — it fits under most standard overhead shelving without adjustment, which matters in kitchens where bench space and clearance height are limited. The die-cast base adds useful stability, though operators should ensure the unit is positioned on a firm, level surface. Cleaning is straightforward, and the blade assembly and jar construction are suited to the cleaning demands of a commercial environment.\u003c\/p\u003e\n\n\u003cp\u003eThis blender is well suited to cafés, juice bars, restaurant kitchens, and hotel food and beverage operations where blending forms a regular part of the menu offer. It performs reliably at moderate to high volumes. For very high-throughput sites — such as dedicated smoothie bars processing continuous back-to-back cycles across a full day — it is worth discussing whether a heavier-duty option would better match the workload.\u003c\/p\u003e\n\n\u003cp\u003eIf you are unsure whether this model is the right fit for your service volume or menu type, the team is happy to talk through the options before you commit to a purchase.\u003c\/p\u003e","brand":"Hamilton Beach","offers":[{"title":"Default Title","offer_id":45154345713981,"sku":"HBF1100SR-UK","price":1613.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/files\/foodservice-equipment-marketing-fem-hamilton-beach-commercial-large-capacity-4l-expeditor-food-blender-1562840364HBF1100S-UK.jpg?v=1683641673"},{"product_id":"robot-coupe-bl-3-blender","title":"Robot Coupe BL 3 Commercial Blender 3 Litre","description":"\u003cp\u003eThe Robot Coupe BL 3 is a countertop commercial blender designed for professional kitchen use. It processes liquid and semi-liquid preparations — soups, veloutés, sauces, coulis, purées, and batters — to a smooth, consistent finish. Built around Robot Coupe's X-Flow technology, the blending action draws ingredients through the blade assembly efficiently, producing fine results whether working with small or near-full quantities.\u003c\/p\u003e\u003cp\u003eIn a working kitchen, the BL 3 is well suited to service environments where speed and consistency matter. The X-Flow design means it doesn't struggle with partial loads the way some blenders do, which is useful during prep when batch sizes vary. It handles both hot and cold preparations, so it's practical across a full range of kitchen tasks without needing to switch between tools.\u003c\/p\u003e\u003cp\u003eFrom an operational standpoint, the BL 3 offers a number of practical advantages:\n\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConsistent results across variable batch sizes, reducing waste and rework\u003c\/li\u003e\n\u003cli\u003eSuitable for both hot soups and cold preparations without adjustment\u003c\/li\u003e\n\u003cli\u003eCompact countertop footprint that fits within most prep station layouts\u003c\/li\u003e\n\u003cli\u003eStraightforward bowl and blade assembly, supporting quick cleaning between uses\u003c\/li\u003e\n\u003cli\u003eRobust build quality consistent with Robot Coupe's reputation in professional kitchens\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstallation is straightforward — the BL 3 is a countertop unit requiring only a suitable mains electrical connection. No fixed plumbing or ventilation is needed. As with any commercial blender, it should be positioned on a stable surface with adequate space around the unit for safe operation and cleaning access. It's worth ensuring your countertop height and surrounding layout allow comfortable, safe use during a busy service.\u003c\/p\u003e\u003cp\u003eThe BL 3 is a practical choice for small to medium kitchens, café operations, hotel kitchens, and restaurants that blend regularly but don't require the throughput of a larger, higher-capacity unit. For sites with very high blending volumes or demanding continuous-use requirements, a heavier-duty model from the Robot Coupe range may be worth considering.\u003c\/p\u003e\u003cp\u003eIf you're unsure whether the BL 3 is the right fit for your kitchen's workload and workflow, we're happy to talk it through with you.\u003c\/p\u003e","brand":"Robot Coupe","offers":[{"title":"Default Title","offer_id":45475433808189,"sku":"47011A","price":1304.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/files\/BL3.jpg?v=1687276597"},{"product_id":"burco-aff3wm-3-ltr-wall-mounted-autofill-filtered-water-boiler","title":"Burco AFF3WM 3 Ltr Wall Mounted Autofill Filtered Water Boiler","description":"\u003cp\u003e2.8kW. Capacity: 3Ltr Ensure your business has a constant supply of hot, filtered water with the Burco AFF3WM autofill water boiler. The convenient wall-mounted design saves valuable counter space, making it an ideal choice for busy staff rooms, cafes, restaurants and pubs. With its autofill functionality, the boiler remains ready for use without the need for manual refilling, whilst the built-in filtration system improves water quality and taste right from the tap.\u003cbr\u003e\u003cbr\u003ePerformance and efficiency are central to the Burco boiler. A rapid 5-minute heat-up time and 3.4Ltr rapid draw-off capacity mean it can meet demand during busy service hours. For periods of lower usage, a programmable ECO mode helps to reduce energy consumption, reducing your energy bills. The unit also features a replaceable filter, which helps to minimise limescale build-up, prolonging the life of the boiler and ensuring consistent water quality.\u003c\/p\u003e","brand":"Burco","offers":[{"title":"Default Title","offer_id":56676048372094,"sku":"069925","price":328.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/files\/Screenshot2025-12-11163720.png?v=1765471054"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1753\/9017\/collections\/filter_80eaa3da-9fa1-4e1d-838e-58b0a06f24e9.jpg?v=1522598825","url":"https:\/\/www.advantage-catering-equipment.co.uk\/collections\/less-than-5-litres.oembed","provider":"Advantage Catering Equipment","version":"1.0","type":"link"}