Insulated Food Carriers

The Cambro UPCS160480 is a top-loading insulated food carrier from the S-Series Camcarrier range, designed to transport hot food safely between kitchens, service points, or off-site locations. It holds a single full-size gastronorm pan and relies on a polyurethane foam core within a polypropylene shell — a well-established construction with a long track record in commercial catering environments.

These carriers are a familiar piece of kit in contract catering, school meal delivery, event catering, and satellite kitchen operations where food needs to arrive at service temperature without the complications of a powered holding unit. Wide nylon latches and a consistent seal help retain heat during transit, reducing the risk of food dropping below safe holding temperatures before it reaches the table.

The practical design suits operational realities rather than adding unnecessary complexity:

• Moulded handles on all four sides keep the unit manageable when fully loaded
• Interlocking base allows secure stacking during storage or vehicle loading
• Lighter than insulated metal alternatives, reducing handling fatigue on longer runs
• No power source required, keeping food transport compliance straightforward

There are no electrical, gas, or plumbing requirements. Setup is simply load and latch. It is worth being clear, however, that passive insulation has limits — this carrier is suited to transit and short-term holding rather than extended service periods. Pre-heating the carrier before loading will meaningfully extend effective holding time and is worth building into your prep routine.

This model is well suited to operators handling smaller-volume deliveries, occasional outside catering, or satellite service points where one or two pans need to travel reliably. Sites moving larger quantities of food regularly may find a higher-capacity multi-pan carrier better matched to their needs.

If you are unsure whether this size fits your service pattern, the team is happy to help you think it through.

The Cambro UPCS140480 is a top-loading, passively insulated food carrier from the S-Series Camcarrier range. It is built to hold a single full-size 1/1 GN pan and maintain food at safe serving temperatures during transport, with no power source required. The polypropylene shell with polyurethane foam insulation core is a well-proven combination — keeping the unit light enough to handle comfortably when fully loaded, while providing reliable thermal retention across typical transport journeys.

This type of carrier is well established in outside catering, events work, school meal delivery, care home services, and satellite kitchen operations. The door seal and nylon latches help contain heat between the kitchen and the point of service, which matters both for food quality and for meeting food safety temperature requirements in transit.

• Top-loading design keeps the GN pan secure and stable during transport
• Four moulded handles allow a confident grip when the carrier is fully loaded
• Stackable construction aids storage efficiency and vehicle loading
• Polypropylene shell handles daily knocks and is straightforward to wipe down
• Passive insulation only — not a substitute for active holding equipment in extended service situations

As a single-pan carrier, this unit is best suited to operators moving smaller quantities — a single course, a supplementary run alongside a larger fleet, or lower-volume meal delivery rounds. For operations regularly transporting multiple GN pans, or where longer retention windows are required, a higher-capacity carrier from the same range is likely to be the more practical choice.

If you are planning a carrier fleet or weighing up sizes for a specific service model, the team is happy to talk through what would work best for your operation.

The Cambro UPC800401 is a large-capacity insulated food carrier built to hold and transport up to twelve full-size gastronorm pans while maintaining safe serving temperatures without any power source. It relies on a double-wall polypropylene shell with substantial foam insulation to retain heat across the extended timeframes that arise in real catering operations — central production runs, banquet service, education meal rounds, and healthcare food distribution.

In practice, this carrier is most useful where food is prepared in one location and served in another, or where hot-held food needs to stay ready during a busy service period without tying up oven or bain-marie capacity. The airtight door gasket makes a meaningful contribution to temperature retention over time, and because it is removable, it can be cleaned separately — a straightforward advantage where hygiene compliance is a daily requirement.

The key practical advantages from an operational standpoint:

• Doors open to 270 degrees, easing loading and unloading in confined spaces
• Fitted castors and moulded handles allow one person to move a fully loaded unit
• No power connection required — no cables, no running costs, no installation
• Durable nylon door latch designed to withstand repeated daily use
• Removable gasket supports routine cleaning and hygiene compliance

Because no electrical connection is needed, the practical considerations are straightforward: adequate floor space, a reasonably level surface when stationary, and sufficient clearance for the door swing in your loading area. On uneven surfaces, care should be taken when the carrier is fully loaded.

This unit is well suited to contract caterers, event catering teams, and healthcare or education operations that regularly move hot food in volume. Smaller operations with more modest pan requirements may find a lower-capacity carrier in the same range a better match. For very high-volume distribution across multiple service points, it is worth considering whether two units or a heavier-duty trolley system would serve the operation more effectively.

If you are working out how many carriers your service model needs, or whether this size is the right fit for your pan count and holding times, the team is happy to talk it through.

The Cambro UPCS180480 is a top-loading passive insulated food carrier from the S-Series Camcarrier range. It holds a single full-size gastronorm pan and is designed to maintain safe food temperatures during transit — from kitchen to service point, or between sites — without any electrical connection. The shell is constructed using polyurethane foam injection into a polypropylene body, a well-proven construction approach for this class of carrier that balances thermal retention with the durability demands of daily commercial use.

Carriers of this type are a practical and reliable tool for operations that need to move food between production and service, or carry prepared meals to off-site locations. Contract caterers, school kitchens, care homes, and event operators routinely rely on insulated carriers where holding temperature is both a food quality concern and a regulatory requirement. The sealed lid and nylon latch system contribute meaningfully to heat retention, reducing the risk of food falling below safe thresholds before it reaches service.

Features that make this carrier well suited to working kitchens include:

• Moulded handles on all four sides for balanced, secure carrying
• Interlocking stackable design that keeps vehicle loading and storage orderly
• Lightweight construction that reduces handling fatigue during repeated trips
• Simple latch-and-seal closure with no specialist knowledge required to operate
• Robust polypropylene shell that handles the routine knocks of a working environment

It is worth being clear about the limitations. This is a passive carrier — it relies entirely on the insulation and the retained heat of the food loaded into it. It is not a substitute for active holding equipment where temperature must be maintained over extended periods, particularly in cold ambient conditions or where delays between loading and service are likely. For longer holding windows or higher-volume runs, an active holding solution or a larger-capacity passive carrier may be more appropriate.

This model suits smaller operations or those with straightforward point-to-point delivery requirements. Sites moving larger volumes, running multiple drops, or requiring several pans per journey may find a higher-capacity carrier better matched to their service pattern.

If you are unsure whether this fits alongside your current holding and transport setup, we are happy to talk it through before you commit to an order.

The Cambro UPCH400 is an electrically heated, insulated pan carrier designed to hold prepared food at a consistent, safe serving temperature during the period between production and service. It accepts six full-size 1/1 GN pans and uses a low-energy heating system built into Cambro's well-established Ultra Pan Carrier chassis — a format that has proven reliable across professional catering operations for many years.

In a working kitchen or events environment, the unit earns its place by bridging the gap between cooking and service without compromising food quality. Whether you are holding ahead of a banquet, buffering output between cooking batches, or transporting food to an off-site service point, the UPCH400 maintains food within a safe temperature band without further cooking or drying it out. Recovery after repeated access is prompt, which matters when staff are opening the unit frequently during a busy service run.

Key practical advantages include:

• HACCP-compliant hot holding to support food safety records and due diligence
• Very low energy consumption, making continuous use through a service period economical
• Built-in thermometer for at-a-glance temperature monitoring without opening the unit
• Moulded handles for safe, stable movement between locations or into vehicles
• Fully insulated body that retains heat effectively even in cooler back-of-house conditions

The unit requires only a standard mains electrical connection and no fixed installation. It can be preheated from room temperature ahead of service and positioned on a worktop, trolley, or floor-level stand as needed. It is important to be clear that this is a holding unit, not a cooking or regeneration device. Food must reach the correct internal temperature during the cooking process before being loaded — the UPCH400 is not designed to raise food temperature from cold, and it should not be used as a substitute for a regen oven or heated cupboard where temperature recovery is required.

This unit is well suited to contract caterers, banqueting operations, school and hospital kitchens, and any operation where food is prepared in advance and held or transported before service. For very high-volume sites requiring a greater number of GN positions, a larger-capacity model within the same range may be more appropriate. For smaller operations with modest holding needs and no reliable access to a power supply at the point of use, a non-electric insulated carrier may be a more practical choice.

If you would like to talk through whether this unit suits your service model — particularly around holding volume, transport requirements, or compliance — our team is happy to help you think it through before you commit.

The Cambro Ultra Pan Carrier is a passive insulated food carrier designed to hold and transport six full-size 1/1 GN pans. It requires no power connection of any kind — temperature retention is achieved entirely through thick polyurethane foam insulation moulded into the body. It handles both hot and cold food safely over extended periods, making it a practical working tool rather than a simple storage box.

In practice, this type of carrier earns its place through consistent, repeatable performance across heavy daily use. Once loaded with food at the correct holding temperature, it maintains safe conditions for several hours. That suits off-site catering, event service, school meal delivery routes, and any back-of-house situation where plugged-in holding equipment is not an option. The front-loading design allows individual pans to be accessed without disturbing the rest of the load — a straightforward advantage during a busy service.

• Passive foam insulation maintains temperature for several hours with no power required
• Front door access allows single-pan retrieval without unsettling the full load
• Integrated menu clip helps identify contents without opening the carrier
• Built-in seal and vent aid cleaning and reduce day-to-day maintenance
• Robust moulded handles and single-latch closure built for repeated daily handling

There are no installation requirements — no electrical supply, water connection, or ventilation is needed. One practical point worth noting: the carrier retains temperature rather than generates it, so food must be loaded at the correct serving or holding temperature before transport. It is also worth confirming that front-loading access suits your vehicle or racking layout, as some operations find a top-loading format better matched to their configuration.

This carrier is well suited to contract caterers, school meal services, event hospitality teams, and any operation that regularly moves food between kitchen and service point. For sites with greater pan volume requirements or a different loading preference, larger or alternative-format carriers in the same range are worth considering.

If you would like to talk through whether this carrier fits your service model or delivery routes, our team is happy to help before you commit to an order.

The Cambro UPCH4002 is a portable heated food carrier built for commercial operations that need to hold and transport hot food away from a fixed kitchen. Constructed from rotomoulded polyethylene with expanded polypropylene insulation throughout, it is a self-contained unit capable of maintaining food at safe serving temperatures for extended periods without any power connection. When a mains supply is available, the active heating element extends the holding window further and supports recovery between loads — useful for events where socket access is intermittent rather than continuous.

In practice, this carrier suits the demands of outside catering, hospitality events, school meal delivery, and welfare catering. The insulation carries the load when no power is available, and the built-in humidity vent gives operators control over moisture levels inside — a useful detail when holding foods that can soften or sweat during transit. The unit performs consistently across a full service period without requiring constant attention.

From an operational standpoint, the key practical advantages are:

• Accepts full-size 1/1 GN pans as well as 1/2 and 1/3 GN configurations
• One-piece rotomoulded construction with no seams to trap food debris
• Moulded-in handles support safe two-person lifting when fully loaded
• Single-action nylon latch allows fast access during busy service
• Colour-coded blue variant supports allergen or menu category segregation

Installation requirements are straightforward — the unit connects to a standard 13A socket when active heating is needed and requires no fixed installation or specialist connection. It is worth confirming that your serving location has a suitable outlet if you intend to use the heating function rather than relying on passive insulation alone. At just over 20kg empty, treat this as a two-person lift once loaded with pans.

This carrier is well suited to outside caterers, event teams, contract caterers supplying multiple sites, and any operation that needs reliable hot food holding without a fixed servery. For single-event use at modest volumes, a smaller passive carrier may be sufficient. For permanent high-throughput holding in a fixed kitchen, a freestanding or countertop heated holding cabinet would be a more appropriate solution.

If you would like to talk through whether this model fits your service pattern or pan configuration before placing an order, our team is happy to help.

This kit from Cambro consists of four stainless steel rails and two frames, designed to work within Cambro's front loading food carrier system. Rather than fixing the carrier to a single internal layout, the components allow operators to adjust rail spacing to suit the containers being transported on a given run.

In practice, this makes a real difference for operations running banqueting, off-site delivery, or multi-outlet service. Carriers can be reconfigured between runs to accommodate different container heights — reducing the temptation to send out partially loaded units and helping operators make better use of available transport capacity during busy periods.

The stainless steel construction handles the everyday demands of food transport environments well. It cleans down quickly, resists the knocks of regular loading and unloading, and holds up reliably in kitchens where carriers are used daily.

• Adjustable rail spacing suits containers of varying heights
• Modular format allows layout changes between service runs
• Stainless steel construction withstands heavy daily use
• Compatible with Cambro front loading food carrier systems
• Lightweight addition that keeps overall carrier weight manageable

This kit is intended for operations already running Cambro front loading carriers who want to extend the flexibility of their existing units. It is worth confirming compatibility with your specific carrier model before ordering, as Cambro produces several configurations within this range.

If you are building a food transport setup from scratch or are unsure how many kits would suit your typical service volumes, the team is happy to work through the options with you.

The Cambro Cam GoBox is a polypropylene insulated food carrier designed for transporting full-size gastronorm pans in commercial catering operations. This top-loading model is 4 inches deep, accommodating a 100mm pan, and is finished in black. It is widely used in event catering, contract catering, hospital and care facility food distribution, and anywhere that food needs to travel a distance between kitchen and service point while maintaining safe holding temperatures.

In practice, the Cam GoBox earns its place through straightforward reliability. The polypropylene shell is robust enough to handle the knocks of regular transportation and daily loading cycles without degrading, and the top-loading design makes it practical to stack and carry. It is the kind of carrier that tends to stay in service for years when looked after correctly — a meaningful consideration for operations that are moving food continuously across a shift.

From an operational standpoint, the key advantages are:

• Insulated construction helps maintain food temperatures during transit and short-term holding
• Top-loading design suits efficient loading and unloading at the point of service
• Polypropylene construction is food-safe, cleanable, and resistant to everyday impact
• Lightweight at under 900g, reducing fatigue when carrying over distance
• Black finish suits front-of-house or buffet environments where appearance matters

There are no water or electrical connections required, and no installation considerations in the traditional sense. It is worth confirming pan depth compatibility before ordering — this model suits 100mm deep full-size gastronorm pans specifically, and Cambro offer a range of depths to match different pan configurations. If you are carrying shallower pans or require a larger volume per unit, a different depth or configuration within the GoBox range may be more appropriate.

This carrier is well suited to event caterers, mobile operations, schools and care homes, and any kitchen supplying a satellite service point. It is less suited to situations where extended hot-holding is required over several hours, where a more heavily insulated or heated unit would be a better fit.

If you are putting together a fleet of carriers for a specific operation, or are unsure which configuration matches your pan setup, feel free to get in touch with the team — it is a straightforward conversation that can save a return.

The Cambro EPP Cam GoBox is an insulated, top-loading pizza transport carrier designed for commercial delivery and catering operations. Built from expanded polypropylene, it is lightweight yet robust, and is intended to keep pizzas at serving temperature during transit from kitchen to customer.

In practice, the carrier performs well in delivery-focused operations where maintaining food quality between dispatch and arrival is a genuine concern. The insulation retains heat reliably over extended transit periods, making it a practical choice for busy delivery services and catered events where pizzas cannot be served immediately. A small steam vent in the lid allows excess moisture to escape during transport, which helps prevent the crust from softening — a detail that makes a noticeable difference to the finished product at the point of delivery.

Key operational advantages include:

• Extended heat retention keeps pizzas at temperature throughout delivery runs
• Steam vent preserves crust texture by releasing excess moisture in transit
• Lightweight polypropylene construction reduces fatigue for delivery staff
• Impact-resistant shell protects pizzas from damage during handling
• Built-in label area supports order management and delivery organisation

There are no significant installation requirements — the carrier is self-contained and requires no power or gas connection. It is compatible with full 1/1 GN pizza boxes and can be stacked to consolidate multiple orders. Cleaning is straightforward: it can be wiped down between runs or put through a commercial dishwasher when a more thorough clean is needed.

This box is well suited to independent pizzerias, dark kitchens, and catering operations running regular delivery rounds. For sites handling very high order volumes simultaneously, it is worth considering whether multiple units or a larger-format carrier would better suit the throughput required.

If you are unsure which size or configuration works best for your operation, the team is happy to talk it through with you.

The Cambro Ultra Camcart is a large-format, foam-insulated food transport carrier built to move bulk quantities of hot or cold food safely between preparation areas, serveries, and offsite locations. Constructed from polypropylene with polyethylene insulation, it holds food at safe serving temperatures during transit or extended service periods without any active heating or refrigeration — a practical requirement for many high-volume operations.

These carriers are regularly used in contract catering, event catering, school meal delivery, healthcare hospitality, and banqueting, where large volumes of plated or bulk food need to travel reliably and arrive in good condition. The front-loading design allows straightforward loading and access, and the airtight removable gasket maintains a secure seal throughout transit. The carrier is rated to 120°C, so it can accept food directly from oven output without risk of distortion — a useful consideration when working at pace during service.

Key operational advantages include:

• Passive insulation maintains food temperatures without powered equipment
• Front-loading access allows efficient loading at height without awkward manoeuvring
• Removable gasket simplifies cleaning and allows straightforward replacement over time
• Compatible with dolly units to ease movement across kitchens and loading bays
• Polypropylene construction resists cracking under daily commercial use

At 62.2kg, this is a substantial unit even before loading. It is worth confirming in advance that your service corridors, loading bay, and vehicle access can accommodate its footprint. A matching dolly is strongly recommended — moving a fully loaded carrier of this size without one is not practical. For tighter spaces or lower volumes, a more compact camcart may be a better fit; for very high-volume central production kitchens, a higher-capacity unit may be worth considering.

This carrier is well suited to mid-to-large scale catering operations where bulk food transport is a regular part of the service model — particularly contract caterers, event teams, and healthcare or education catering providers who need dependable temperature retention without a powered solution.

If you are weighing up whether this size is right for your service volumes and transport setup, we are happy to talk it through before you place an order.

This Cambro front-loading insulated food carrier is a passive, non-powered unit designed to transport and hold gastronorm pans at food-safe temperatures away from the kitchen. Built from polyethylene with polyurethane insulation and a sealed door gasket, it is intended for operations where food is prepared centrally and then moved to a remote service point — without access to power or heat-holding equipment at the destination.

In practice, this type of carrier is widely used in contract catering, school meals services, care home operations, and event and banqueting catering. The front-loading configuration allows gastronorm pans to be loaded and retrieved quickly, which is important when service windows are short and access needs to be efficient. The carrier accommodates full 1/1 GN pans across two levels, giving operators the flexibility to carry multiple dishes or courses in a single unit.

Key operational advantages include:

• Front-loading door with nylon latches for secure closure and fast access during service
• Airtight gasket maintains temperature throughout the hold period without any power connection
• Compatible with the Cambro Camdolly for safe movement between preparation and service areas
• Polyethylene shell is robust, lightweight relative to capacity, and straightforward to wipe down after use

It is worth noting that this is a passive carrier — it retains the temperature of food loaded into it rather than generating heat. Pre-conditioning the unit by placing a hot pan or warm water inside before loading will noticeably improve temperature hold performance, particularly in colder environments or for longer transport runs. At just under 90 litres, this unit is well matched to small-to-medium service volumes; operations running higher quantities or extended multi-course services may find a larger-capacity model in the same range more appropriate.

This carrier suits caterers, care homes, schools, and contract catering operations that regularly move batch-cooked or plated food to off-kitchen service points. If you are weighing up whether the capacity or configuration fits your service pattern, the team is glad to help you think it through before you commit.

The Cambro EPP top loading food pan carrier is a robust, insulated transport box designed to hold a single 600 x 400mm bakery crate or food pan up to 200mm deep. Built from expanded polypropylene, it is a practical solution for operations that need to move hot or cold food between preparation and service points, or out to off-site catering events and delivery runs.

In practice, the carrier maintains food temperatures across a working service period without the need for power or fuel. The polypropylene construction handles the knocks and drops that come with busy transport environments, and the material is unaffected by oil, grease and most cleaning chemicals, which keeps maintenance straightforward. Integrated handles reduce physical strain when lifting a fully loaded carrier.

Key operational advantages include:

• Reliable passive temperature retention for hot or cold food in transit
• Lightweight build at 1.4kg reduces manual handling fatigue over a shift
• Compatible with Cambro Camdolly for efficient multi-unit transport
• Accepts Camchillers and Camwarmers to extend holding time where needed
• Resistant to impact, oil, grease and most chemicals for durable daily use

No power source is required, which makes this carrier straightforward to deploy with no installation considerations. It is worth noting the single-crate capacity — operations moving larger volumes at once may find they need multiple units or a higher-capacity carrier from the range. The wide operating temperature tolerance means it performs equally well for chilled and hot food applications.

This carrier suits mobile caterers, school meal delivery operations, event catering teams, and any kitchen regularly transporting prepared food off-site. For sites with significantly higher throughput or a need to stack multiple GN pans in a single carry, a larger or multi-level carrier may be worth considering.

If you are unsure whether this size suits your typical load or how it fits alongside your existing trolley equipment, we are happy to talk it through before you order.

The Cambro S Series Ultra Insulated Carrier is a top-loading polypropylene food transport box designed to hold a single full 1/1 GN tray. Its purpose is straightforward: maintaining safe food temperatures during transit and holding periods, whether that means moving hot food from a production kitchen to a servery or keeping prepared dishes at temperature ahead of service.

The thick foam insulation core is what makes this carrier useful in real operational settings. For buffet services, event catering, or off-site delivery, the ability to hold food at a safe serving temperature over a meaningful period reduces dependence on reheating at the point of service and helps keep the flow of service consistent. The polypropylene shell is robust enough to handle the knocks, drops, and stacking that come with regular use across busy kitchens and transport environments.

A few design details are worth noting from an operational standpoint:

• Four nylon latches seal firmly to retain temperature and prevent accidental opening in transit
• Moulded-in handles on all four sides allow comfortable carrying in any orientation
• Interlocking corners enable stable stacking during storage or vehicle transport
• Polypropylene body wipes down easily and resists staining from food contact
• Rated to handle contents up to 120°C, covering the full range of hot holding requirements

It is worth being clear about what this carrier is and is not. It is a passive insulation product — it retains temperature rather than generating heat, so pre-loading food at the correct serving temperature is essential. It is also sized for a single full GN tray, so operations handling larger volumes at once will either need multiple units or should consider a higher-capacity multi-tray carrier from the broader range.

This carrier is well suited to event caterers, schools, hospitals, care homes, and contract catering operations that need a reliable, lightweight solution for transporting or holding hot food in GN format. If you are unsure whether this model suits your service volumes or workflow, we are happy to talk it through.

The Cambro electric heated insulated pan carrier is a purpose-built unit for transporting and hot-holding food in commercial catering operations. It is designed to maintain safe serving temperatures during transit, at off-site events, or in staging areas where a fixed bain-marie or heated cabinet is not practical. The heating elements are built into the doors rather than the base, which distributes warmth more evenly across the load and keeps the exterior cool to the touch — a practical consideration when staff are moving units through busy service areas or loading bays.

In demanding catering environments the carrier performs reliably. The thick foam insulation retains heat for extended periods even when disconnected from the mains, which provides useful flexibility during the final leg of a delivery run or when a power point is temporarily unavailable. The polyethylene shell is resistant to denting, rusting, and chipping, which matters when units are handled repeatedly across multiple sites and stored in less-than-ideal conditions.

From an operational standpoint, the main practical advantages are:

• Maintains HACCP-compliant hot-holding temperatures throughout service without fixed infrastructure
• Built-in thermometer allows temperature checks without breaking the seal or opening the unit
• Non-corrosive heating unit reduces long-term maintenance concerns
• Polyethylene exterior wipes down quickly between runs
• Moulded handles and vent cap are designed for regular handling in transit

The unit operates on a standard 220V supply, so no specialist electrical installation is required, though confirming a suitable outlet at the point of use before deployment is sensible. At 88kg loaded, movement between floors or across sites without lift access needs to be planned in advance. The carrier accepts 1/1 GN full-size pans, so it is worth confirming compatibility with your existing gastronorm inventory before ordering.

This carrier is well suited to contract caterers, event catering operations, school meal services, and hospital or care home catering where food is prepared centrally and distributed to multiple service points. It is less suited to operations requiring continuous high-volume regeneration in a fixed kitchen, where a static heated cabinet would likely serve better. For sites running larger-scale off-site events or needing greater total capacity, larger models in the Cambro heated carrier range are worth considering alongside this one.

If you are comparing this carrier against other hot-holding solutions for your operation, our team is happy to talk through the practicalities with you before you decide.

The Cambro Cam GoBox is a top-loading insulated food carrier designed for transporting hot or cold food safely between kitchen and service point. Built from expanded polypropylene (EPP), it is a practical choice for catering operations that need reliable temperature retention without heavy equipment. It accommodates a single full-size 1/1 GN pan at 200mm depth, making it compatible with standard gastronorm prep and holds a clean place in most transport workflows.

In real-world use, the GoBox is well suited to operations where food is prepared centrally and distributed to events, satellite sites, or customers. The thick EPP construction maintains temperatures for over four hours in typical conditions, which covers most delivery rounds and buffet set-up windows without the need for additional heat sources. The carrier is resistant to oil, grease, and most common cleaning chemicals, which matters when equipment is turned around quickly between services.

Practical advantages for day-to-day operations include:

• Lightweight construction at just over 800g, reducing fatigue on longer runs
• Secure latches that prevent accidental opening during transit
• Integrated handles on all sides for a comfortable grip regardless of how it is picked up
• Inter-stackable design that saves meaningful storage space when carriers are not in use
• Built-in label area to hold menu tags, keeping contents clearly identified across a delivery batch

There are no electrical or water connections required. The unit is entirely passive, which keeps it straightforward to deploy anywhere. It is worth noting that the 46-litre capacity suits single-pan transport; operations moving larger volumes across multiple pan sizes would need to consider additional units or a larger carrier format. Camchillers and Camwarmers are compatible with this model and can extend holding times where longer windows are needed.

This carrier is most appropriate for small to mid-sized catering operations, food delivery services, event caterers, and care or education settings that run a central production and distribution model. For sites running high-volume multi-pan deliveries on a frequent basis, a larger or multi-compartment carrier may be worth discussing.

If you are unsure whether this size suits your service volume or pan configuration, the team is happy to help you work through the options.

The Cambro EPP insulated food pan carrier is a top-loading polypropylene box designed to transport or hold a single full-size gastronorm pan — specifically a 1/1 GN at 150mm depth — while maintaining temperature for extended periods. It is a straightforward, well-built piece of kit aimed at caterers who need reliable food transport without the bulk or expense of a larger multi-pan system.

In practice, this carrier handles the demands of function catering, outside venue service, and last-mile food delivery comfortably. The polypropylene shell is resistant to impact, grease, oil, and most food chemicals, which means it holds up through the sort of repeated loading, stacking, and transit knocks that quickly show up weaknesses in cheaper alternatives. The wide operating temperature range — from well below freezing to a safe hot-holding threshold — means it works equally well with pre-chilled items as it does with hot food.

Key practical advantages include:

• Compatible with Cambro Camchillers and Camwarmers to extend hold times actively
• Integrated handles that make lifting safer and reduce strain during busy service periods
• Compatible with the Cambro Camdolly for trolley-based transport over longer distances
• Resistant to oil, grease, and common cleaning chemicals
• Lightweight construction at just over 1kg unladen, reducing fatigue on long runs

There are no electrical or plumbing requirements — the carrier is entirely passive unless used with optional Cambro thermal inserts. It is compact enough for van transport, back-of-house storage, and service station use, though teams running high-volume multi-course events should consider whether a larger multi-pan carrier better fits their throughput.

This carrier suits mobile caterers, hospitality teams managing off-site functions, and kitchen operations running regular hot or cold food deliveries. It is well suited to single-dish or single-course transport rather than complex multi-item service.

If you are unsure whether this size fits your service style or how it integrates with your existing Cambro kit, our team is happy to talk it through with you.

This Cambro top loading insulated food carrier is a practical, lightweight solution for transporting hot or cold food safely — whether to an off-site event, between kitchen and service point, or as part of a delivery operation. It accommodates a single full-size 1/1 GN pan at 200mm depth, and the polypropylene construction keeps it light enough to handle comfortably even when loaded.

In a busy catering environment, reliable temperature retention matters. The insulated shell is designed to hold food within safe serving temperatures for extended periods without requiring an external power source. For operations that need to push hold times further, the carrier is compatible with Cambro Camchillers and Camwarmers (both sold separately), which sit inside the box alongside the pan to actively extend hot or cold holding periods.

Practically, the carrier is well suited to the demands of commercial use:

• Polypropylene shell resists impact, oil, grease, and most common cleaning chemicals
• Integrated handles are designed for safe, comfortable lifting under load
• Compatible with the Cambro Camdolly trolley for site movement without manual carrying
• Top loading design gives straightforward access to the pan without awkward side access
• Rated across a wide temperature range, suitable for both hot food holding and cold transport

One practical consideration: this is a single-pan carrier, so for operations moving larger volumes simultaneously, multiple units or a higher-capacity carrier system may be more appropriate. The Camdolly compatibility partly addresses this if you are running several boxes at once.

This carrier is a good fit for contract caterers, event and hospitality teams, schools, and care catering operations where food needs to leave the kitchen safely and arrive at the correct temperature. It is equally useful for on-site operations where food is prepared in a central kitchen and held or transported to a separate service area.

If you are unsure whether this capacity suits your service volumes, or whether Camchillers or Camwarmers would add value to your setup, we are happy to talk it through before you order.

The Cambro GoBox EPP is a top-loading insulated food carrier designed to transport a single 600x400mm bakery crate — up to 300mm deep — safely between kitchen and service point. Built from expanded polypropylene, it is lightweight without sacrificing structural rigidity, and holds its shape reliably under the kinds of repeated daily loads common in busy catering operations.

The real-world value of a carrier like this lies in holding temperature long enough to matter. The GoBox is compatible with Camchillers and Camwarmers (both sold separately), which significantly extend cold or hot holding times when used correctly — a useful consideration for off-site events, delivery runs, or any situation where food is prepared ahead and transported to service. The operating temperature range is broad enough to handle both chilled and hot-held foods without degrading the shell.

From a practical standpoint, the GoBox offers several advantages worth noting:

• Comfortable integrated handles for safe, balanced lifting with a loaded crate
• Resistant to oil, grease, and most common kitchen chemicals
• Top-loading design keeps contents stable during transport
• At 1.7kg empty, it adds minimal dead weight to any load
• Compatible with Cambro Camchiller and Camwarmer accessories for extended temperature retention

It is worth being clear about the carrier's scope: this is a single-crate solution. For operations moving larger volumes simultaneously, multiple units or a higher-capacity carrier format may be more practical. It is also a passive insulated carrier — temperature retention depends on the starting temperature of the food and, where required, the use of the appropriate Cambro accessory.

The GoBox suits caterers, event operators, schools, and healthcare sites that need a reliable, manageable carrier for off-site delivery or on-site distribution. It is a practical choice where consistency and ease of handling matter more than volume.

If you are unsure whether this carrier suits your transport workflow or want to discuss compatible accessories, our team is happy to help you work through the options.

This is the replacement lid for the Cambro Cam GoBox range of insulated food pan carriers, specifically compatible with the EPP180, EPP180S, and EPP160 models. Made from polypropylene, it provides a secure, close-fitting closure that helps maintain the insulating performance of the carrier during transport and holding.

In operational terms, lids take wear over time — dropped on hard floors, knocked in transit, or simply cycled through high-volume service repeatedly. Having a spare or replacement to hand avoids a carrier being put out of service unnecessarily. The red colour coding is a practical feature that many kitchens use to differentiate carriers by content type, dietary requirement, or delivery route, reducing the chance of mix-ups during busy service or dispatch.

• Colour-coded red for quick visual identification of carrier contents or routing
• Suitable for use with EPP180, EPP180S, and EPP160 Cam GoBox carriers
• Polypropylene construction — robust enough for regular commercial handling
• Lightweight at 300g, adding minimal weight to the overall carrier

This lid is straightforward to fit and requires no tools or modifications. It is worth confirming the exact carrier model before ordering, as Cam GoBox lids are not interchangeable across all carrier sizes in the range.

Well suited to catering operations that run multiple carriers across different routes or dietary categories and rely on colour coding to keep service organised. If you are unsure which lid or carrier configuration suits your operation, the team is happy to help you work through the options.

The Cambro Ultra Insulated Frontloader is a passive GN tray carrier designed to transport and temporarily hold hot or cold food between a production kitchen and a service point. It accommodates three full-size 1/1 GN trays, loaded through a front-opening door rather than from above — a practical design choice that allows trays to be slid in and out cleanly during a busy service without lifting or tilting the unit.

In regular use, these carriers are found across contract catering, school meal delivery, healthcare foodservice, and event catering where food needs to travel from a central kitchen and arrive at the point of service in good condition. The polyurethane shell provides reliable passive insulation over the short-to-medium holding periods typical of off-site and satellite service runs, and the door seal helps maintain a consistent internal temperature throughout.

From an operational standpoint, the carrier offers several practical advantages:

• Frontloading door design reduces spill risk when loading and unloading trays mid-service
• Stackable construction allows multiple units to be stored or transported together efficiently
• Labelling area on the door supports food safety recording and route identification
• Door seal sustains even internal temperatures throughout the holding period
• Robust polyurethane shell withstands the handling demands of regular transport use

There are no electrical connections or water requirements. As a passive carrier, it depends entirely on food being loaded at the correct temperature before departure — it is not a substitute for active heated or refrigerated holding where precise temperature control over extended periods is needed. For higher-volume operations or longer holding windows, larger-capacity models within the Cambro range may be worth considering.

This carrier is well suited to operations that regularly run tray meals off-site, manage satellite service points, or need a dependable passive solution for the gap between production and service. It is less suited to static kitchen environments where plugged-in holding equipment would provide better control.

If you are working out how this fits alongside your existing transport setup, or want to talk through whether the capacity suits your service volumes, our team is glad to help.

The Cambro Ultra Camcart is a large-format insulated food transport carrier designed for commercial catering operations where food needs to move reliably between a central production kitchen and a remote service point — whether that is an event venue, satellite location, healthcare ward, or delivery vehicle. Built from polypropylene with polyurethane foam insulation, it loads from the front and seals via a removable airtight gasket, maintaining temperature integrity throughout the journey.

In practice, this carrier is most commonly used by contract caterers, event hospitality teams, school meal services, and healthcare catering operations where consistency of food temperature across a transit run is a compliance requirement as much as a quality one. The front-loading design is a practical advantage during busy service turnarounds — containers can be retrieved without lifting or tilting the unit, which reduces handling time and the risk of spillage when working under pressure.

From an operational standpoint, the key characteristics worth considering are:

• Front-loading access speeds up loading and unloading during tight service windows
• Removable gasket can be cleaned thoroughly and replaced when worn, extending service life
• Slate blue colour coding supports HACCP-based separation protocols across a fleet
• Accepts 1/1 GN full-size containers, compatible with standard combi and gastronorm kit
• Designed for use with a compatible dolly, avoiding the need to carry the unit when loaded

At 39kg unladen, this is a substantial piece of kit. It should always be used with a dolly rather than carried manually once loaded. Before purchasing, it is worth checking access routes, doorway widths, and lift dimensions across your site to confirm the unit will move freely. It is built for hot holding and transit rather than oven loading, so it should not be used as an oven-to-table unit in a direct-heat context.

The Camcart is well suited to mid- to large-scale transport requirements. Smaller operations moving fewer containers at a time may find a lower-capacity carrier more practical and easier to handle. For very high-volume distribution sites with frequent multi-unit runs, a heavier-duty or higher-capacity option may be worth considering.

If you are working out how many units you need across a transport run, or want to check dolly compatibility with your existing kit, the team is happy to talk it through before you order.

The Cambro CamDolly is a purpose-built wheeled dolly designed to work specifically with Cambro's GN 1/1 front and top loading CamGo insulated food carrier boxes. Rather than lifting and carrying loaded carriers by hand, operators place the CamGo box onto the dolly and wheel it wherever it needs to go — across a kitchen, along a service corridor, or out to a delivery vehicle.

In practice, the dolly is most useful during busy service periods when staff are repeatedly moving loaded CamGo boxes over distance. Removing that repeated lifting from the workflow reduces fatigue and lowers the risk of manual handling injuries — a practical concern for any operation running catering at volume. The ABS plastic construction resists denting, cracking, and corrosion, and won't absorb moisture the way timber or uncoated metal alternatives can. It wipes down quickly and cleanly between uses.

• Robust castors suited to varied floor surfaces, including ramps and uneven ground
• Durable ABS construction — resistant to impact, moisture, and corrosion
• Matched specifically to GN 1/1 CamGo front and top loading configurations
• Lightweight enough not to add meaningfully to the overall load being moved
• Smooth surfaces throughout for straightforward cleaning and hygiene maintenance

There are no installation requirements — the dolly needs no assembly and is ready to use straight away. It is worth confirming before ordering that your existing CamGo boxes are the GN 1/1 front or top loading variant, as Cambro produce several CamGo formats and this dolly is sized specifically for that configuration. Operations moving several loaded carriers simultaneously may want to consider running multiple dollies or a heavier-duty transport solution.

This dolly is well suited to contract caterers, event catering teams, hospital and school meal operations, and any kitchen regularly transporting loaded GN 1/1 CamGo carriers between locations. If you're not certain whether it's the right match for your carrier setup or transport workflow, we're happy to talk it through before you order.

This kit contains two stainless steel rails designed to work with Cambro Cam GoBox front-loader food carriers. The rails slot into the carrier interior to create adjustable dividing positions, allowing operators to vary the spacing and configure the internal space to suit whatever needs transporting on a given run.

In practice, the main value here is flexibility. A fixed-rail setup locks you into one configuration, which works until you need to carry something that does not fit the standard spacing. These adjustable rails allow the same carrier to handle GN containers, trays, or other food vessels of different depths without needing a second box or compromising how securely items sit during transit.

• Stainless steel construction — durable, hygienic, and easy to wipe down
• Adjustable positioning to accommodate different container sizes
• Allows mixed loads within a single carrier
• Helps maximise use of available carrier space
• Compatible with Cambro Cam GoBox front-loader carriers

There is little to install as such — the rails drop into position without tools. The main consideration is confirming compatibility with your specific Cam GoBox model before ordering, as not all Cambro carrier variants share the same internal dimensions.

These rails are most useful for operations that carry varied container sizes across a single delivery run, or where carrier space needs to be used efficiently. Catering companies, event caterers, and hospital or care catering teams tend to find the most benefit. If your operation runs a consistent, uniform load every time, the additional flexibility may be less relevant.

If you are unsure whether this rail kit is the right fit for your current carrier setup, we are happy to talk it through before you order.

The Cambro EPP top loading food pan carrier is a lightweight, insulated transport box designed to hold a single half-size gastronorm pan up to 200mm deep. Built from expanded polypropylene, it is intended for caterers who need to move hot or cold food safely between a production kitchen and a service point — whether that is an outside event, a hospitality suite, or a delivery run.

In practice, the carrier works well where consistent holding temperatures matter during transit. The polypropylene construction tolerates temperatures from well below freezing up to 120°C, meaning it handles both hot plated food and chilled preparations without issue. Cambro's GoBox range is designed to accept camwarmers and camchillers inside the carrier, which meaningfully extends active holding times beyond what passive insulation alone can achieve — a useful consideration for longer journeys or delayed service.

The practical advantages of this model are straightforward:

• Resistant to oil, grease, and most common cleaning chemicals
• Integrated handles reduce strain and the risk of dropping during a busy service
• Lightweight construction at 700g makes it practical for lone operators to carry
• Robust enough to withstand knocks and drops without deforming
• Compatible with Cambro camwarmer and camchiller inserts for extended thermal holding

Because this carrier holds a single half-size GN pan, it is best suited to smaller-volume transport needs — side dishes, sauces, garnishes, or a single portioned menu item rather than a full main course run. For operations moving larger quantities in a single trip, a multi-pan or full-size GN carrier will almost certainly serve better.

This model is commonly used by event caterers, contract caterers, and smaller hotel operations where lightweight portability and reliable thermal protection are the main priorities. It is not designed for static hot-holding in a kitchen; it is a transport solution.

If you are unsure whether this size works for your service volumes or whether thermal inserts are worth adding, the team is happy to talk it through before you order.

The Cambro EPP Front Loading Food Pan Carrier is a large-format passive insulated transport container designed to hold up to nine full-size sheet pans. The shell is moulded polypropylene with an expanded polypropylene insulated core — a construction that provides reliable thermal retention without any electrical or mechanical components. It is used widely across contract catering, event catering, central production kitchens, and institutional foodservice operations where food needs to travel at safe holding temperatures between preparation and service.

In day-to-day operation, the carrier holds temperature for extended periods under normal conditions. When Cambro's Camwarmer or Camchiller inserts are placed at the rear of the unit, holding times extend significantly — making this a practical choice for multi-drop delivery runs or large events where food may be in transit for several hours. The wide operating temperature tolerance of the polypropylene shell means the same unit can be used for both hot-hold and chilled applications.

Several design details make a practical difference during busy turnarounds:

• The door swings open to 270 degrees and latches clear of the opening, allowing unobstructed pan loading and unloading
• Integrated handles on all four sides support a safe two-person lift from any position when fully laden
• A built-in label area helps identify contents when multiple carriers are in transit simultaneously
• Compatible with the Cambro Camdolly system, removing the need to hand-carry across large sites or between vehicles
• No power source required — fully passive, with no installation dependencies

Because this is a passive carrier, there are no electrical, gas, or water connections to consider. Storage and workflow planning are the main practical factors. At 6.6kg unloaded, the carrier is manageable empty, but operators should plan for trolley support when fully loaded with nine pans and product. It is also worth checking available racking or vehicle storage heights before ordering, as the unit stands 687mm tall.

This carrier is well suited to catering companies, hospital and care home catering teams, school meals operations, and event caterers who regularly move food between production and service locations. For smaller operations with lower pan volumes, a reduced-rail version is likely more practical. For sites running frequent multi-carrier deployments, it is worth discussing whether a dedicated trolley system should be specified at the same time.

If you would like to talk through whether this carrier fits your distribution workflow or event setup, the team is glad to help before you commit to an order.