Food Servery & Display Accessories

The Moffat VCCP Carving Pad is a purpose-made accessory designed to sit over the hot top on compatible Moffat servery units fitted with a thermo glass panel. It provides a stable, heat-resistant surface at the counter, allowing carving to take place at the correct point in the servery line without resorting to improvised boards positioned away from the heat source.

In a carvery or roast-focused service environment, keeping the carving position properly integrated into the servery makes a meaningful difference to how service flows. The pad holds the joint directly above the heat below, helping to maintain serving temperature throughout the carving process rather than allowing it to cool on a cold surface set to one side. During a busy Sunday service or a high-throughput carvery sitting, that consistency matters both for food quality and for the pace at which staff can work.

• Fits directly over the hot top — no modification required
• Compatible with Moffat serveries featuring a thermo glass panel
• Keeps carving integrated within the heated servery zone
• Supports consistent presentation and safe handling during service
• Straightforward to remove for cleaning between services

This pad is intended specifically for compatible Moffat servery units and is not a universal accessory. Compatibility should be confirmed against your existing equipment before ordering. If you are specifying a new servery setup or are unsure whether your current unit is suitable, it is worth checking before purchasing.

If you would like to confirm whether this pad works with your existing Moffat servery, or talk through how to configure a carvery station effectively, the team is glad to help.

The Victor BMCV1 is a drop-in carvery insert designed to sit within the 1/1 GN aperture of a compatible Victor bain marie servery or hot cupboard. It combines a carving surface with an integrated gravy dish, keeping both elements together at the counter without requiring a separate heated vessel or additional power connection.

During a busy carvery or Sunday lunch service, the practical value of this arrangement becomes clear quickly. Having the gravy positioned immediately at the carving point reduces the movement staff need to make between vessels, keeps the counter tidy across a long service period, and helps maintain a consistent presentation from the first cover to the last. Because the insert draws heat from the host unit, there is nothing additional to wire in and no changes needed to the existing counter layout.

• Gravy dish sits directly at the carving point, reducing staff movement
• Drops into compatible Victor serveries with no additional wiring or setup
• Uses the host unit's heat — no separate power connection required
• Keeps the counter clear and presentation consistent throughout service
• Removes the need for an extra heated vessel on the pass

It is worth confirming compatibility before ordering. The insert is designed for units that accept a standard 1/1 GN pan, but older or non-standard serveries may not accommodate it directly. As a single-well insert, operations running a longer carvery counter with multiple joints may need more than one unit to cover the full pass.

This insert suits hotels, pub restaurants, and catering operations running a regular carvery service where a compatible Victor servery is already in place. If you are building a carvery counter from scratch or want to check whether this fits your current setup, we are happy to talk it through before you order.

The Victor DHCP1 is a glass carvery insert designed to drop into compatible Victor hot cupboards and bain marie-topped servery units. It replaces a standard pan position with an open, glass-lined display area, giving both guests and carving staff a clear, unobstructed view of whole joints or large cuts throughout service.

In a working carvery environment, counter presentation plays a genuine role in the dining experience. This insert allows an existing Victor servery to take on a dedicated carvery display function without requiring a separate counter or a full equipment replacement. The glass construction keeps the counter looking consistent and well-organised, and the open-top format means carving staff can access the joint directly without lifting lids or moving covers between portions.

• Slots into compatible Victor hot cupboard and bain marie servery positions
• Glass construction provides guests and staff with a clear view of the joint
• Open-top format allows unobstructed carving access throughout service
• Designed to a 1/1 GN footprint for a flush, stable fit within the counter
• Removable at the end of service for straightforward cleaning

It is worth being clear that this is an unheated accessory. Temperature retention depends entirely on the host unit beneath it, so the insert works best in a properly maintained and adequately heated servery. Before ordering, it is sensible to confirm that your existing Victor unit is configured to accept a 1/1 GN pan at the intended position, as counter layouts can vary across the range.

This insert suits operators who already run a Victor carvery or servery setup and want to add or replace a display position within their existing counter. If you are building a new carvery station from the ground up and want to make sure everything works together, the team is happy to talk it through.

The Victor BTTTOP is a genuine replacement tiled top surface designed to fit the Victor BT range of buffet toppers. It is a straightforward maintenance part — not a modification or upgrade — intended to restore the unit's working surface when wear, chipping, or damage through regular service use has made it unsuitable for a customer-facing environment.

In a carvery or servery setting, the topper surface absorbs a considerable amount of daily punishment. Hot dishes are placed and moved repeatedly, heavy serving utensils make contact with the surface, and frequent cleaning cycles with commercial chemicals all contribute to deterioration over time. A worn or visibly damaged surface affects presentation and can raise legitimate hygiene concerns at a station guests are looking directly at. This replacement top allows operators to address that without committing to the cost of a full unit replacement.

• Restores a clean, presentable surface to a worn or damaged BT buffet topper
• Genuine Victor part — no adaptation or modification required for fitment
• Tiled surface handles the thermal and physical demands of active service
• Maintains a consistent appearance across a multi-unit servery line
• Reduces capital outlay when the base unit remains in sound working order

Compatibility is specific to the Victor BT range, and it is worth confirming your exact model before ordering. If there is any uncertainty about which unit you are running or whether this top will fit, the team is happy to check that with you before you place an order.

The Victor BTCTOP is an interchangeable carvery top designed to fit the Victor BT range of buffet toppers. Rather than purchasing a separate dedicated carvery unit, it allows operators to convert an existing BT base into a carvery servery station — a straightforward solution for sites where the servery layout needs to flex between different service formats or menu days.

This kind of modular accessory is commonly used in hotel restaurants, pub dining rooms, carvery-specific restaurants, and care home dining facilities where a traditional roast presentation forms part of regular service. Swapping the top between configurations means the base unit can support different service styles without committing additional floor space to a standalone unit.

• Converts an existing BT buffet topper to a carvery configuration quickly
• Allows the same base to support different service formats across the week
• Reduces the need for multiple standalone servery units
• Suits venues rotating between buffet and carvery service
• Helps manage servery investment and available floor space more efficiently

It is worth confirming compatibility before ordering. The Victor BT range includes several variants, and cross-checking your current base unit model reference against this accessory will avoid any fitting issues on delivery. This top is not a standalone heated unit — it requires the appropriate BT base to function as intended.

This accessory is best suited to operations that already own, or are purchasing, a Victor BT buffet topper and want carvery presentation capability without a separate unit. For sites planning multiple servery configurations or higher-volume carvery service, it is worth discussing the wider Victor servery range to ensure the full setup meets your throughput and presentation requirements.

If you are unsure whether this top is compatible with your current equipment, or you are planning a broader servery layout, our team is happy to work through the details with you before you order.

The Victor BMCV2 is a carvery insert designed to fit within bain marie topped serveries or hot cupboards that can accept a full 1/1 GN pan position. It converts an existing servery aperture into a carvery-style serving point, allowing joints of meat to be presented and carved at the counter without the need for a separate standalone unit.

In a busy service environment, this kind of insert earns its place by making better use of existing equipment. Rather than investing in an entirely separate carvery station, operators can integrate carvery service directly into an established hot servery line. This is particularly practical where carvery forms a regular part of the offer — Sunday lunch service, hotel dining, or carvery-led restaurants — but where counter space and capital outlay both need to be managed carefully.

Because the insert works within the existing heat source of the host unit, there are no additional electrical connections required. It is straightforward to position and remove, which supports a clean end-of-service breakdown routine and makes day-to-day cleaning manageable.

• Converts a bain marie position into a carvery serving point without additional equipment
• Requires no extra power connections — draws heat from the host unit
• Easy to remove for cleaning and end-of-service breakdown
• Makes practical use of existing servery counter space and footprint
• Suits regular carvery service in hotel dining, pub kitchens, and restaurants

This insert is best suited to operators already running Victor bain marie topped serveries or compatible hot cupboards who want to add a carvery position without expanding their counter footprint. For sites where carvery is the primary service concept at high volume, a purpose-built carvery station is likely to be the more practical long-term investment.

If you are unsure whether this insert is compatible with your current servery configuration, the team is happy to check the fit before you place an order.

The Moffat FTBA is a bains marie adaptor designed specifically for use with Moffat Focus topper units. It converts the topper into a bains marie configuration, allowing it to accept gastronorm pans up to 1/1 size at 65mm depth. It is a straightforward accessory with a specific purpose — extending the functionality of an existing Focus topper rather than operating as a standalone unit.

In a servery or carvery setting, the ability to hold sauces, gravies, soups, or sides at consistent serving temperatures without repurposing bulkier equipment is a practical advantage. This adaptor allows operators to make better use of counter space already occupied by a Focus topper, keeping the servery compact and organised during service.

Key practical points worth noting:

• Accepts GN pans up to 1/1, 65mm deep — pans are not included
• Designed specifically for Moffat Focus topper units — not a universal fit
• Keeps the servery footprint tight by adding bains marie function to existing kit
• Straightforward to fit and remove for cleaning between services

This adaptor is best suited to operators who already have a Moffat Focus topper in their servery setup and want to add a wet-heat holding option without investing in additional counter equipment. It is not a standalone bains marie and will not function independently of the Focus topper unit it is designed for.

If you are unsure whether this adaptor is compatible with your current setup, or if you are specifying a new servery from scratch, it is worth having a conversation with us before ordering.

The Moffat FTCS perforated inlay is a replacement or supplementary component designed specifically for use within Moffat Focus topper chip dump units. It sits inside the chip dump housing and allows warm air to circulate freely around held product, giving moisture a route to escape rather than settling around chips and other fried foods during the hold period.

Keeping fried foods in acceptable condition through a full service is one of the more persistent challenges at counter and carvery stations. Steam build-up is the primary cause of softening, and the perforated design of this inlay addresses that directly. Chips, battered items, and similar products hold their texture for meaningfully longer, which reduces waste and the need for staff to intervene or refresh product mid-service.

Practical advantages of this inlay include:

• Allows moisture to escape, reducing softening of chips and fried foods during holding
• Supports consistent food quality across the length of a busy service period
• Compatible with Moffat Focus topper chip dump configurations
• Straightforward to remove and clean between services
• Available as a replacement part, keeping maintenance costs low

This listing covers the perforated inlay only — not the full chip dump assembly or topper unit. Compatibility is specific to the Focus topper range, so it is worth confirming your existing unit's model reference before ordering to avoid any mismatch.

If you are unsure whether this inlay is the right fit for your current setup, or you are building a complete chip dump and topper arrangement from scratch, the team can confirm the correct specification before you commit to an order.

The Victor BTPTOP is a stainless steel top designed for use with Victor's BT range of buffet toppers. It is an interchangeable component, allowing operators to swap or replace the top surface without replacing the entire unit — useful where the existing top has become worn, damaged, or where a spare is needed to support continuous servery operation.

Stainless steel is the standard material choice for food servery surfaces in commercial environments, offering a hygienic, easy-to-clean finish that holds up well under the demands of daily service. As a purpose-made accessory for the BT range, the BTPTOP is designed to fit correctly without modification.

This type of component is most relevant to operators who already run Victor BT buffet toppers and need a replacement top, or who are planning a servery setup and want to hold a spare. If you are unsure whether this top is compatible with your specific BT unit, or if you are configuring a buffet servery from scratch, it is worth speaking with us before ordering to confirm the right fit.

The Moffat PPGAST is a contact-chilling polar plate designed specifically for use with Moffat's Focus Polar range of chilled display units. It operates on a straightforward thermal storage principle — frozen in advance, then placed into the display unit to provide a sustained cold surface during service, with no powered refrigeration connection required at the point of display.

The plate is deep-frozen before service, absorbing thermal energy that it then releases gradually once deployed. This gives a consistent chilled surface across a practical service window, making it a workable solution for cold buffet, salad bars, or light chilled display where a direct refrigeration feed is not available or not needed.

In operational terms, the key practical points are:

• Plates require deep freezing for 12 to 24 hours before service begins
• Once deployed, they provide a reliable chilled surface for approximately two hours of service
• Running plates in rotation extends service periods without any additional power at the display point
• No electrical connection is required during service
• Sized and designed for direct compatibility with Moffat Focus Polar display units

This approach suits operations where flexibility and a lighter footprint matter — mobile servery, event catering, or supplementary cold display in sites where running additional refrigeration is impractical. It does require disciplined preparation, though. Plates must be frozen well ahead of service, and longer buffet runs or higher-throughput events will need a rotation system to sustain the cold surface. For continuous or extended service periods, a fully refrigerated display unit may be the more practical choice.

If you are working out whether a polar plate setup will fit your service schedule, or want to discuss how many plates you would need for a given run time, the team is happy to talk it through with you.

The Victor DHTP1 is a tiled carvery insert designed to drop into a 1/1 GN pan position within a compatible bain marie-topped servery or hot cupboard. Rather than leaving that position occupied by a standard pan, it replaces it with a purpose-built tiled surface suited to presenting and carving roasted joints directly at the counter.

In carvery and traditional roast service settings, the tiled surface holds heat well throughout the service period, keeping the carving area at a usable working temperature from the first cover to the last. It also provides a firmer, more stable base than a pan insert, which makes a practical difference when carving under pressure during busy service. In dining environments where the servery counter is visible to guests — pub restaurants, hotel carveries, and similar operations — the tiled finish presents more neatly than bare steel.

• Tiled surface retains heat to support carving from start to end of service
• Firm, stable base suited to carving roasted joints at the counter
• Drop-in fitting into compatible 1/1 GN pan positions
• Better guest-facing presentation than a standard pan insert
• Suited to bain marie-topped counters in carvery and roast service settings

Fitting is straightforward within compatible Victor units, but it is worth confirming that your existing servery accepts a standard 1/1 GN pan in the intended position before ordering. Pan aperture dimensions can vary, particularly on older units or counters from outside the Victor range, so checking compatibility first avoids unnecessary returns.

This insert suits pub restaurants, hotel dining rooms, and catering operations running a regular carvery or Sunday roast service. It is a focused accessory rather than standalone equipment, and its value depends entirely on having a suitable host unit already in place. If you are unsure whether your current servery will accept it, our team is happy to help you confirm before you commit.

The Victor BTGTOP is a direct replacement glass top panel designed specifically for the Victor BT range of buffet toppers. It fits into the existing unit frame, allowing a damaged, cracked, or heavily scratched panel to be exchanged without taking the entire assembly out of service or investing in a full unit replacement.

On a working carvery or hot buffet counter, the glass top is in near-constant contact with serving utensils, tongs, trays, and dishes throughout service. Chips and surface scratches accumulate over time — more quickly in high-footfall operations where the counter barely rests between covers. That is a realistic and predictable outcome rather than an unusual failure.

Having a like-for-like spare to hand is straightforward operational housekeeping. A cracked panel is both a hygiene concern and a presentation issue; being able to swap it quickly keeps the unit in service rather than withdrawn while a replacement is sourced. A clean, unscratched surface also wipes down more effectively and presents food more clearly — a detail that carries weight on any attended or self-service counter where appearance influences how guests perceive the offering.

This panel suits operators already running Victor BT buffet toppers who need a dependable direct replacement. The BT range covers several configurations, so it is worth confirming your specific model before ordering to ensure the correct top is supplied. If there is any uncertainty about compatibility, the team is happy to check the right fit before an order goes through.

The Moffat FTBH is a bag holder accessory designed specifically for use with Moffat Focus topper units. It is intended to keep bags securely positioned during service, supporting a tidy and organised servery setup.

Beyond its compatibility with Focus topper units, we currently have limited product detail available for this item. If you are unsure whether this accessory is the correct fit for your existing equipment or servery configuration, we would recommend getting in touch before ordering — it is a straightforward question and worth confirming first.

118mm Lamp. 200W Infrared lamps are low pressure tungsten halogen heat lamps, a reliable way of generating heat for catering and other industrial applications. They heat the object in the path of the energy using direct radiation, and provide this instantly with no warm up time. This 200W bare IR Quartz bulb is easy to change and provides a long life of 5000 hours. 118mm Length.

118mm Lamp. 300W Low pressure quartz lamps, jacketed version greatly increases safety in food outlets by helping to prevent glass falling into food.

This is the manufacturer replacement heating element for the Olympia CB729 and CB730 electric chafers. When the heating element in one of these units fails or degrades, this part restores the chafer to working order without the need to replace the complete unit.

In a buffet or banqueting environment, a chafer that fails to hold temperature during service creates an immediate food safety and presentation problem. Having a spare element to hand — or replacing a faulty one promptly — keeps service running and avoids the cost of a full equipment replacement. The element is the working heart of an electric chafer, responsible for maintaining the water pan temperature that holds food at safe serving temperatures throughout service.

For operators running multiple electric chafers across a buffet line, it is worth keeping a spare element in stock. A failed element mid-service is a straightforward fix if the part is available, and significantly more disruptive if it is not.

This element is compatible specifically with the Olympia CB729 and CB730 models. It is not a universal part, so confirming your chafer model before ordering is important. Installation is generally straightforward, but if there is any uncertainty about the process, an engineer familiar with this type of equipment should carry out the replacement.

If you are unsure whether this is the correct element for your unit, or if you are looking at replacing ageing chafer equipment across a larger operation, we are happy to help you work through the options.

220mm Lamp. 500W Low pressure quartz lamps, jacketed version greatly increases safety in food outlets by helping to prevent glass falling into food.

118mm Lamp. 200W Infrared lamps are used in catering to keep food at a safe temperature, using low pressure tungsten halogen heat lamps. This is done via direct radiation, used extensively on the pass, in chip dumps and burger shoots. This 200W jacketed IR Quartz bulb is easy to change, provides instant heat and has 5000 hours of life. 118mm Length.

118mm Lamp. 300W Ceramic holder and aluminium reflector for all standard 118mm lamps. Low pressure quartz lamps, jacketed version greatly increases safety in food outlets by helping to prevent glass falling into food.

This is the manufacturer-matched replacement heating element for the Olympia GD128 electric chafer. Over time, heating elements can degrade and lose the ability to reach or sustain the temperatures needed for safe food holding — this part restores that function and brings the unit back to its original operating performance.

In buffet and hospitality service, consistent food-holding temperature is not optional. A chafer that runs cool risks food safety compliance and poor guest experience during service. Replacing a failing element rather than the entire unit is the practical and cost-effective solution, provided the rest of the chafer remains in sound condition.

From a practical standpoint, the element is a straightforward like-for-like replacement designed to fit the GD128 without modification. Key operational advantages of keeping the electric chafer running correctly include:

• No naked flame — safer for front-of-house and self-service environments
• More consistent heat output compared with gel or spirit fuel alternatives
• Easier temperature management during extended service periods
• Reduced ongoing fuel costs once the unit is back in reliable working order

It is worth confirming before ordering that the fault lies with the element specifically, rather than with the power connection, thermostat, or another component — a straightforward check that avoids an unnecessary purchase. This element is compatible with the GD128 model only; if you are unsure which chafer model you have, it is worth checking before ordering.

If you have any questions about compatibility or want to talk through whether replacement or upgrade is the right call for your operation, we are happy to help.

220mm. 300W Low pressure quartz lamps, jacketed version greatly increases safety in food outlets by helping to prevent glass falling into food.

118mm Lamp. 300W Low pressure quartz lamp suitable for use with nearly all standard 118mm fittings. Approx 5000hr life.