Sink Accessories

This 75mm stainless steel sink strainer from KitchenCraft is a straightforward, practical accessory designed to sit in a standard sink plug hole and catch food debris before it enters the drain. The perforated design allows water to pass through freely while retaining solid waste, helping to prevent the blocked drains that are a persistent and disruptive problem in busy kitchen environments.

Made from stainless steel, it resists rust and stands up to regular commercial use. It is dishwasher safe, which makes keeping it hygienic straightforward during daily service routines — a practical consideration in any kitchen operating under food safety obligations.

• Fits most standard 75mm sink plug holes without modification
• Perforated to retain food waste while maintaining free water flow
• Stainless steel construction resists rust and corrosion
• Dishwasher safe for straightforward daily cleaning
• Lightweight and simple to remove, empty, and refit during service

This is a simple, low-cost item, but having the correct size to hand matters — a strainer that doesn't seat properly in the plug hole won't catch debris reliably. If you're unsure whether this fits your existing sinks, the team are happy to help you confirm compatibility before you order.

The KitchenCraft 75mm sink strainer is a straightforward stainless steel basket strainer designed to sit in a standard sink waste outlet and catch food debris, solids, and particulates before they enter the drain. It does one job and does it reliably.

In a busy commercial kitchen, blocked drains are a recurring and avoidable problem. Unprotected sink wastes accumulate food scraps, grease-bound debris, and small solids throughout a service, and the cost of a plumber's call-out quickly outweighs any saving made by not fitting basic protection. A strainer of this type is one of the simplest preventive measures a kitchen can take.

Practical advantages in day-to-day use include:

• Catches food debris before it reaches the waste pipe
• Stainless steel construction resists corrosion in wet, heavy-use environments
• Dishwasher safe, so it can be cleaned as part of the normal kitchen routine
• Lightweight and simple to remove, empty, and refit during service
• Fits most standard 75mm sink waste outlets

Installation requires no tools — the strainer simply drops into a compatible 75mm waste outlet. It is worth confirming the waste diameter on your existing sinks before ordering, as some older or imported sinks may use non-standard sizing.

This strainer suits any commercial kitchen looking for low-cost drain protection on prep or wash-up sinks. It is a consumable-level accessory rather than a long-term capital item, and for sites with very high throughput, a heavier-duty or larger-bore strainer may be worth considering.

If you are unsure whether this fits your existing sink waste or are equipping a new kitchen and want to discuss the right sink accessories, the team is happy to help.

This stand pipe is designed to provide a correctly proportioned waste outlet for commercial sink bowls with a 300mm depth. The 80mm flange diameter seats into the base of the bowl, creating a stable, properly fitted waste assembly that aligns with standard commercial sink configurations. It is a straightforward replacement or new-installation component rather than a complex fitting, but selecting the correct stand pipe height and flange size for your sink specification matters — an ill-fitting pipe will not seat correctly and can compromise drainage.

In a working kitchen environment, sink waste fittings are subjected to consistent use, hot water, cleaning chemicals, and occasional physical contact during cleaning routines. A stand pipe that is dimensioned correctly for the sink bowl depth maintains a reliable seal at the flange, reduces the likelihood of slow drainage caused by incorrect positioning, and simplifies future cleaning access around the waste assembly.

Key practical points to note before ordering:

• Designed specifically for sink bowls with a 300mm internal depth
• 80mm flange diameter — confirm your sink bowl waste aperture matches before purchasing
• Suitable for use with standard commercial stainless steel sink fabrications
• A straightforward component with no electrical or gas requirements

This fitting is best suited to kitchens replacing a worn or incorrectly sized stand pipe, or to new sink installations where the bowl depth is confirmed at 300mm. If your sink bowl is a different depth, a stand pipe sized to match that dimension will be needed — fitting the wrong height can affect drainage performance and seal integrity.

If you are unsure whether this fitting matches your existing sink specification, our team is happy to help you confirm the correct size before you order.

The Mechline Food Waste Sink Strainer 500 is a stainless steel basket strainer designed to sit at the sink drain boss and intercept food particles before they enter the drainage system. It is a straightforward, passive piece of equipment — no moving parts, no power required — but it addresses one of the most persistent maintenance problems in a working kitchen: blocked drains caused by food debris accumulating in the pipework.

In a busy kitchen, food waste enters the drainage system continuously during prep and service. Without a properly fitted strainer at the sink, that debris builds up, causes slow drainage, and eventually leads to blockages and the odours that come with them. A strainer at this point in the system catches the bulk of that waste before it becomes a problem, keeping drainage free-flowing and reducing the frequency of drain-clearing call-outs.

The stainless steel construction is well suited to a commercial environment — it handles repeated handling, hot water, and the cleaning chemicals used in professional kitchens without deteriorating. At 510mm wide and 410mm deep, this is sized for a larger sink or pot-wash position rather than a standard single bowl.

• Reduces food debris entering the drainage system at source
• Helps prevent blockages and associated drainage odours
• Stainless steel construction withstands heavy daily use and cleaning chemicals
• Passive operation — no maintenance schedules or power requirements
• Easy to remove and empty during service

This strainer suits kitchens with a high volume of food preparation where drain management is an ongoing concern — catering operations, school kitchens, and hospitality sites with busy pot-wash areas. For smaller sink positions, a different size may be more appropriate.

If you are unsure whether this size is right for your sink configuration, we are happy to help you confirm the correct fit before you order.

The Mechline Food Waste Sink Strainer 600 is a stainless steel strainer basket designed to sit within the sink drain boss and intercept food waste particles before they enter the drainage system. It is a straightforward, passive piece of equipment — no moving parts, no power requirement — that addresses one of the most common causes of blocked drains and drainage odours in commercial kitchens.

In busy kitchen environments, prep sinks handle large volumes of food waste throughout service. Without effective filtration at the point of drainage, solid particles accumulate in pipework, leading to slow drainage, blockages, and unpleasant odours that can affect the wider kitchen environment. A sink strainer intercepts this waste before it becomes a drainage problem, making it a practical preventative measure rather than a reactive fix.

The practical advantages of having the right strainer in place are straightforward:

• Reduces frequency of drain blockages caused by food solids
• Helps maintain hygiene standards at the sink station
• Minimises the need for chemical drain treatments or call-outs
• Supports compliance with kitchen hygiene and waste management expectations
• Easy to empty and clean during and between service periods

At 610mm wide, this strainer is sized for a standard 600-series commercial sink. It is worth confirming the internal dimensions of your sink bowl and drain boss position before ordering, as sink configurations vary between manufacturers and an ill-fitting strainer will not perform as intended. The stainless steel construction holds up well to regular handling and commercial cleaning regimes.

This strainer suits most commercial prep sinks in restaurants, hotel kitchens, pub kitchens, and catering facilities handling moderate to high volumes of food preparation. For kitchens operating multiple prep sinks or processing very high volumes of waste, it is worth reviewing whether additional waste management measures are appropriate alongside a strainer.

If you are unsure whether this strainer is the right fit for your sink configuration, the team is happy to help you check compatibility before you order.

This standpipe is designed to fit sink bowls with a 300mm depth and a 70mm flange diameter. It seats into the waste fitting flange in the base of the bowl, providing a correctly sized outlet for water drainage. It is a straightforward replacement or installation component rather than a universal fitting — the match between standpipe height, bowl depth, and flange diameter is what determines whether it will work in a given sink.

Getting the standpipe specification right matters more than it might appear. A standpipe that is too short will not hold adequate water depth in the bowl; one that is too tall will prevent proper drainage. This component is sized specifically for 300mm deep bowls with a 70mm flange, so it is worth confirming both measurements against your existing sink before ordering.

If you are unsure whether this standpipe matches your sink bowl specification, or if you are fitting out a new sink installation and want to confirm compatibility, feel free to get in touch — it is a quick check that avoids an unnecessary return.

This stand pipe is a replacement or spare waste fitting designed for commercial sinks with a bowl depth of 250mm. It seats into a 70mm diameter flange in the base of the sink bowl, providing the correct standpipe height to allow proper waste drainage without overflow. Getting this component right is important — a standpipe that is too short or too tall for the bowl depth will either drain too quickly or cause pooling, both of which create practical problems during a busy service.

It is a straightforward, functional component that is commonly required when fitting out a new sink installation or replacing a worn or damaged waste fitting on an existing unit. Ensuring the standpipe matches the sink bowl depth exactly is the key consideration here.

This fitting is specifically sized for a 250mm deep bowl with a 70mm flange. If your sink has a different bowl depth or flange diameter, this part will not seat correctly — it is worth confirming your sink's measurements before ordering. If you are unsure which standpipe is correct for your sink, our team is happy to help you confirm the right specification before you order.