Mops & Brushes

The Jantex Heavy Duty Dustpan and Brush Set is a straightforward, practical cleaning tool designed for commercial kitchen and food service environments. Made from polypropylene, both the pan and brush are built to handle heavier debris — including broken glass and food waste — rather than the light dust and fluff a domestic set is typically designed for.

In a working kitchen, floor debris needs clearing quickly and safely, particularly during or after service. The dustpan features a raised lip and rubberised edge that helps seat it flat against the floor, reducing the chance of debris escaping underneath when sweeping into the pan. This makes it more reliable for picking up fine grit and small fragments than a standard flat-edged pan.

The set offers a few practical advantages for daily kitchen use:

• Rubberised pan edge helps seal against the floor during sweeping
• Sturdy brush construction handles heavier debris including broken glass
• Polypropylene construction resists moisture and is simple to clean down
• Compact dimensions suit storage in tight back-of-house areas
• Suitable for regular heavy-duty use across a busy service day

This is a workhorse item rather than a specialist piece of kit — it suits most commercial kitchen and front-of-house environments where a reliable, durable dustpan and brush is needed for daily use. For larger sites with high-traffic areas, it is worth considering whether a longer-handled or higher-capacity option might reduce the frequency of emptying and improve ergonomics for staff.

If you are equipping a kitchen from scratch or reviewing your cleaning kit, feel free to get in touch — we are happy to talk through what works well in practice.

The Rubbermaid Pulse is a trigger-operated spray mop designed for routine floor cleaning in commercial environments. A built-in 600ml fluid reservoir means operators can cover a substantial area without returning to a bucket, with solution dispensed in three targeted streams each time the trigger is pressed. This gives the user direct control over application and avoids over-wetting the floor.

In a working kitchen or busy front-of-house, the ability to clean quickly between tasks without setting up a full mop-and-bucket system is a practical advantage. The microfibre pad uses a zig-zag scrubbing pattern that handles dried-on soiling more effectively than a flat mop, and the dense fibres pick up fine dust and debris rather than spreading it. The hook-and-loop pad attachment allows fast swaps without handling the soiled pad directly, which keeps things hygienic and practical during or between service periods.

• Colour-coded pad ribbons support zone cleaning and help reduce cross-contamination risk
• Pads are machine washable up to 500 times, reducing ongoing replacement costs
• Compatible with bleach and high-pH cleaning detergents
• Lightweight aluminium and plastic construction is manageable across a full shift
• No bucket required — solution is carried on the mop itself

This is a practical daily-use tool rather than a solution for deep cleaning or heavily soiled floors. For those applications, a traditional mop-and-bucket system or a scrubber dryer is likely more appropriate. The Pulse is well suited to kitchens, cafés, bars, and front-of-house areas where floor hygiene needs maintaining quickly and regularly throughout the day.

If you are building out a broader cleaning kit or have specific colour-coding requirements across multiple zones, the team are glad to help you work through what makes sense for your site.

This is a replacement microfibre pad for the Jantex 400mm flat mop head system. It attaches via Velcro to the mop head frame and is designed to be removed easily for laundering or swapping out during a busy shift.

Microfibre is a practical choice for commercial kitchen floors. The material picks up fine particles, grease residue and liquid effectively without requiring heavy chemical dilutions, which helps reduce product consumption over time. It also dries relatively quickly after washing, making it easier to keep spare pads in rotation.

The pad features colour-coded tags, which allows kitchens operating a colour-coded cleaning system to designate specific pads to particular zones — for example, keeping food preparation areas separate from front-of-house or wash-up. This is a straightforward way to support cross-contamination controls without additional complexity.

• Velcro attachment for quick pad changes mid-shift
• Colour-coded tags support zone-based cleaning protocols
• Microfibre construction reduces reliance on cleaning chemicals
• Machine washable for repeated use across multiple shifts
• Compatible with the Jantex 400mm flat mop head frame

This pad is compatible with the Jantex 400mm flat mop head and handle, both of which are sold separately. It is worth confirming compatibility before ordering if you are using a different frame.

If you are unsure how many pads to keep in rotation for your operation, or have questions about fitting this into a wider cleaning regime, the team is happy to help.

This microfibre pad is designed as a replacement or spare for the Jantex 600mm flat mop frame. Made from microfibre material, it attaches via Velcro and can be removed quickly for laundering or swapping out during a shift. The pad is suited to hard floor surfaces commonly found in commercial kitchens, serveries, and front-of-house areas.

In a working kitchen environment, microfibre performs well because it picks up liquids, grease residue, and fine debris without requiring heavy chemical use. The 600mm width covers a reasonable floor area per pass, which helps when clearing large spills or completing a thorough clean between service periods. Because the pad is washable and reusable, it holds up well under the kind of repeated daily use that disposable alternatives would not sustain economically.

Practical advantages for kitchen teams include:

• Colour-coded tags support a zoned cleaning system to reduce cross-contamination risk
• Velcro attachment allows fast pad changes without tools or downtime
• Washable construction reduces ongoing consumable costs
• Microfibre construction lifts grease and bacteria effectively with less chemical reliance
• Compatible with the Jantex 600mm flat mop frame and corresponding handle (sold separately)

This pad is a straightforward consumable item, but it is worth confirming compatibility with your existing mop frame before ordering. It is designed specifically for the Jantex 600mm flat mop system — it will not fit narrower frames in the same range.

Well suited to kitchens of any size where a flat mop system is already in use. If you are setting up a new colour-coded cleaning system or are unsure which components you need, the team is happy to point you in the right direction.

The SYR Clip-It II is a plastic mop head holder designed specifically for use with SYR Kentucky mop heads. It attaches via a clip mechanism with securing teeth that grip the mop head firmly during use, reducing the risk of the head slipping or detaching mid-clean. The holder is compatible with SYR's range of interchangeable handles, making it straightforward to swap mop heads between handles as part of a structured cleaning routine.

Supplied in blue, this pack is intended to support colour-coded cleaning systems — a common requirement in commercial kitchens, food production environments, and hospitality settings where cross-contamination controls need to be demonstrable and consistent. Blue is typically assigned to general or low-risk areas, though your own HACCP or cleaning schedule will dictate how colours are allocated across your site.

Practical advantages for busy operations include:

• Colour-coded blue design supports zoned cleaning protocols
• Clip-and-teeth mechanism provides a secure, reliable hold on Kentucky mop heads
• Compatible with SYR interchangeable handle system for flexible deployment
• Pack of 10 provides sufficient stock for multi-zone or multi-shift use
• Simple design with no moving parts to maintain or replace

These holders are well suited to kitchens, back-of-house areas, and food service environments where a robust colour-coded cleaning regime is in place. If your operation uses a different mop head format or a non-SYR handle system, it is worth checking compatibility before ordering.

If you are setting up or reviewing your cleaning equipment across a site, the team are happy to help you work out the right quantities and colour allocations for your setup.

This is a replacement and interchangeable handle from SYR's colour-coded cleaning system range. The red handle is intended for use in bars and licensed areas as part of a structured colour-coding scheme, helping kitchen and front-of-house teams keep cleaning equipment allocated to the correct zones and avoid cross-contamination between areas.

The handle is designed to fit and interchange across all SYR mop heads and broom heads within the interchangeable system range, which makes it straightforward to replace handles independently of heads, or to expand an existing colour-coded setup without replacing complete assemblies. At 1,370mm in length and 410g, it's a standard full-length handle well suited to floor and general cleaning tasks.

For operations running a formal colour-coded cleaning protocol — whether to meet food safety requirements or internal hygiene standards — having a consistent set of matched handles and heads in the correct colours simplifies staff training and reduces the risk of equipment being used in the wrong area. Red is the conventional designation for bars and licensed zones within many colour-coded systems.

Sold individually. If you're putting together a full colour-coded cleaning kit or need guidance on which heads are compatible with this handle, the team is happy to help you work through the options.

These SYR Super Drying Pocket Sleeve mop heads are microfibre flat mop refills designed for use with the SYR flat mop holder. They are sold in packs of five, making them a practical choice for kitchens and front-of-house areas that go through mop heads at pace.

In a busy commercial kitchen, the ability to deal with spills and wet floors quickly is a genuine safety priority. The microfibre construction absorbs moisture effectively, allowing floor surfaces to be dried promptly and reducing slip hazards during service. The material is non-abrasive, so it is suitable for use on tiled, vinyl, and sealed floor surfaces without causing surface damage.

Keeping a stock of replacement sleeves means janitorial staff are never waiting on a clean mop head, which is particularly useful in environments where cleaning rounds happen throughout the day rather than just at close.

• Microfibre construction for effective moisture absorption
• Non-abrasive material safe for hard floor surfaces
• Pocket sleeve design for straightforward fitting and removal
• Sold in packs of five for ongoing stock replenishment
• Compatible with the SYR flat mop holder system

These sleeves are well suited to kitchens, serveries, front-of-house areas, and any commercial environment where maintaining dry, hygienic floors is a routine requirement. If you are equipping a larger site or need to standardise cleaning equipment across multiple areas, it is worth talking through your requirements with the team before ordering in quantity.

The Rubbermaid Mechanical Brushless Sweeper is a manually operated floor sweeper designed for routine cleaning in commercial catering and hospitality environments. Rather than using conventional bristle brushes, it uses non-marking rubber blades to collect dust, debris, and minor spills from hard floor surfaces without scattering fine particles or leaving marks on sealed flooring.

In day-to-day kitchen and front-of-house use, this type of sweeper works well between service periods when a full mop-down isn't needed but the floor requires a quick pass. The rubber blade system handles dry debris and light spillage reliably across smooth and lightly textured hard floors, and the lightweight construction — around 2.2kg — means it can be used for extended periods without fatigue.

Practical advantages for busy sites include:

• Non-marking rubber blades suitable for use on a range of sealed hard floor surfaces
• Lightweight galvanised steel and ABS plastic construction keeps the unit easy to handle
• No power source required — no cables, no charging, ready to use immediately
• Compact footprint makes storage straightforward in tight back-of-house areas
• Quick to deploy for between-service floor maintenance without disrupting service flow

The sweeper is best suited to front-of-house dining areas, bar floors, café spaces, and hotel corridors where light daily maintenance is the primary need. It is not designed to replace a full wet-mop regime or handle heavy industrial spillage — for high-traffic kitchens with significant debris, a more robust cleaning solution would be worth considering.

If you're unsure whether this sweeper fits the cleaning routine you have in mind, our team is happy to talk through your requirements.

These are replacement scraper blades for the SYR L889 floor scraper, sold in a pack of five. Constructed from steel and aluminium, they are designed to slot into the L889 head assembly and restore the tool to full working condition once a blade has worn or become damaged through regular use.

In a busy commercial kitchen, floor scrapers take a fair amount of punishment — removing baked-on grease, debris, and residues from hard floor surfaces during and after service. Having spare blades to hand means the tool stays in use rather than being set aside until a replacement is ordered, which matters when floor hygiene needs to be maintained consistently across a shift.

The blades are compatible with the SYR colour-coded handle system, which allows kitchens to assign specific tools to designated areas — food preparation, wash-up, washrooms, and front-of-house — reducing the risk of cross-contamination. Keeping a stock of spare blades supports that system without requiring the purchase of entirely new tools.

• Straightforward blade replacement rather than replacing the full tool
• Compatible with SYR colour-coded interchangeable handles
• Supports area-specific cleaning protocols to reduce cross-contamination risk
• Pack of five provides a practical working stock for busy sites

These blades are suited to any commercial kitchen, food service operation, or catering facility already using the SYR L889 scraper. If you are uncertain whether these are the correct replacement for your existing equipment, or you are looking to build out a broader colour-coded cleaning kit, we are happy to help you confirm compatibility before you order.

The SYR Clip-It II is a colour-coded plastic holder designed specifically for use with SYR Kentucky mop heads. The clip mechanism uses secure teeth to grip the mop head firmly, keeping it in place during use and reducing the risk of the head detaching mid-clean. It is compatible with SYR's range of interchangeable handles, making it straightforward to replace worn holders without having to source a new complete mop assembly.

In a busy commercial kitchen environment, colour-coded cleaning equipment is a practical requirement rather than a preference. Yellow is the standard colour designation for general floor cleaning in most kitchen hygiene protocols, helping staff identify the correct equipment quickly and reducing cross-contamination risk across different cleaning zones. Supplied in a pack of ten, this product suits sites that run multiple mop stations, operate shift-based cleaning schedules, or simply want to keep replacement holders in stock.

• Colour-coded yellow for hygiene zone compliance
• Secure clip and teeth mechanism for a reliable hold on Kentucky mop heads
• Compatible with SYR interchangeable handle systems
• Pack of ten suits multi-station or high-turnover cleaning setups
• Simple clip design allows quick mop head changes between tasks

These holders are a minor but practical part of keeping a cleaning kit properly organised and compliant. If you are building out a full colour-coded cleaning system or are unsure which SYR handle or mop head works alongside these, the team is happy to help you piece it together correctly.

The SYR green mini mop head is a looped-end Syntex yarn mop head designed for use as part of SYR's colour-coded cleaning system. The green colour designation is intended for use in public spaces and front-of-house areas, helping kitchen and facilities teams maintain a clear separation between cleaning zones and reduce the risk of cross-contamination.

Made from pre-shrunk Syntex yarn, the mop head is rot-resistant and will not harbour the odours that can develop with natural fibre alternatives over time. It is machine washable at temperatures up to 90°C, which allows for thorough sanitisation between uses — a practical consideration in food service environments where cleaning equipment hygiene is subject to the same scrutiny as the kitchen itself.

• Colour-coded green socket for clear zone identification
• Rot-free Syntex yarn — no odour build-up with regular use
• Machine washable to 90°C for effective sanitisation
• Compatible with SYR colour-coded wringer and sieve buckets
• Designed to fit the SYR green interchangeable handle

This mop head is sized for lighter-duty or more confined cleaning tasks. It is designed specifically to fit the SYR green interchangeable handle and works as part of a wider colour-coded system that includes matching buckets and wringers. If your site requires heavier-duty or larger mop heads for high-traffic areas, alternative sizes are available within the same range.

If you are setting up a full colour-coded cleaning system across multiple zones and are unsure which combination of heads, handles, and buckets best suits your site layout, the team is happy to assist.

This is a straightforward, well-made mop handle from Jantex, constructed in stainless steel and designed to be compatible with the Jantex range of interchangeable mop heads. At 1240mm in length it suits standard commercial cleaning tasks across kitchen floors, service areas, and back-of-house spaces.

The stainless steel construction holds up better in wet environments than plastic or wooden alternatives, resisting corrosion and standing up to the repeated soaking and daily use typical in busy catering operations. It is a practical choice for sites where mop handles take a regular battering.

The interchangeable design is where this handle earns its keep in a working kitchen. Rather than maintaining a separate fully assembled mop for each task, staff can switch heads depending on the job — wet mopping, dry mopping, or heavier scrubbing — without needing additional handles. This keeps the cleaning cupboard manageable and reduces the overall number of items to store and account for.

• Compatible with the Jantex interchangeable mop head range
• Stainless steel construction suited to wet and high-traffic environments
• Three-section design allows compact storage when not in use
• Grooved grip for comfortable extended use by cleaning staff

This handle is well suited to most commercial kitchens, restaurants, cafés, and contract cleaning operations already using Jantex mop heads. It is a like-for-like replacement or additional handle rather than a standalone cleaning solution — you will need to pair it with the appropriate Jantex mop head for your tasks.

If you are putting together a cleaning kit from scratch or are unsure which mop heads work best for your floor type and service environment, the team are happy to point you in the right direction.

The Jantex 400mm flat mop head is a straightforward aluminium-framed cleaning tool designed to work with Jantex microfibre flat pads and the matching mop handle, both sold separately. The 400mm working width makes it practical for corridor-width runs, customer-facing areas, and smaller back-of-house spaces where a full-sized mop would be unwieldy.

In a commercial environment, flat mop systems like this are commonly used for daily floor maintenance, swift spill response, and end-of-service cleans. The microfibre pads the frame accepts are well suited to picking up liquid, grease residue, and general debris with less water than a traditional string mop — which matters in kitchens where wet floors create slip risks and drying time affects workflow.

• Accepts compatible Jantex microfibre pads for effective surface contact
• Aluminium frame keeps the head lightweight for extended use
• 400mm width covers ground quickly without being oversized for tighter spaces
• Reduces water usage compared to conventional mop-and-bucket methods
• Simple pad attachment supports fast changeovers during service

The 400mm size is best suited to smaller premises — cafés, front-of-house areas, prep rooms, or serveries — rather than large open kitchen floors where a wider frame would cover more ground per pass. For sites with extensive floor areas, it is worth considering whether a wider frame would better match the workload.

If you are building out a cleaning kit or want to check pad compatibility before ordering, the team is happy to point you in the right direction.

The SYR Mini Mop Head in blue is a pre-shrunk syntex looped-yarn mop head designed for use in bar areas and smaller service spaces where a full-size mop would be impractical. It fits the SYR interchangeable handle system and is part of a broader colour-coded cleaning programme intended to keep different areas of a site clearly separated.

In a busy commercial environment, colour-coded cleaning equipment is one of the most straightforward ways to manage hygiene discipline across a team. Blue designation is commonly applied to bar areas, and using a matched mop head, handle, and bucket means staff can identify the correct equipment at a glance without relying on labelling or verbal instruction.

Practical benefits for operators include:

• Machine washable to 90°C, supporting thorough hygiene between uses
• Pre-shrunk syntex yarn maintains shape and performance after repeated washing
• Rot-resistant construction prevents odour build-up over time
• Colour-coded socket aids quick identification and reduces cross-contamination risk
• Compact 14" diameter suits tighter spaces such as bar counters and service areas

This mop head is intended for use with the corresponding SYR colour-coded handle and, ideally, a matching sieve bucket or wringer to remove excess water effectively. Using the system together — head, handle, and bucket in the same colour — gives operators the most reliable hygiene control and prolongs the life of the mop head by ensuring adequate water extraction after each use.

This product suits bars, café service areas, and smaller prep zones where a compact, washable mop head is needed as part of a managed cleaning system. Sites with larger floor areas or heavier soiling requirements may find a full-size mop head more appropriate for those zones.

If you're putting together a colour-coded cleaning kit across multiple areas of your site, we're happy to help you select the right combination of heads, handles, and buckets — just get in touch.

The SYR NU Lady 2 is a fully integrated mop bucket and wringer system designed for routine floor cleaning in commercial environments. The wringing unit is built into the bucket rather than supplied as a separate attachment, which reduces the number of parts to manage and keeps the setup compact during use and storage.

It is compatible with both Kentucky-style and flat mops, which makes it a practical choice for sites that use more than one mopping method or that may change their cleaning equipment over time. The built-in chemical portion pod allows cleaning solution to be dosed consistently, reducing waste and helping staff maintain the correct dilution without measuring by eye. Castors make it straightforward to move between areas during a cleaning round, and the integrated dirt sump keeps debris separated from the main wash water.

Practical day-to-day advantages include:

• Colour-coded yellow body supports cross-contamination prevention protocols
• Integrated wringer removes the need for a separate clip-on unit
• Pick-up-and-go handle for easy repositioning between areas
• Chemical dosing pod encourages consistent dilution and reduces product waste
• Castors and dirt sump aid efficient, uninterrupted cleaning rounds

The yellow colour coding aligns with widely used kitchen hygiene zoning practices, where yellow typically denotes general-purpose or low-risk areas. If your site follows a strict colour-coded cleaning regime, it is worth confirming which zones yellow equipment is assigned to within your own cleaning policy before ordering.

This system suits small to medium commercial kitchens, cafés, and front-of-house areas where a reliable, self-contained mopping setup is needed. For larger sites with extended cleaning rounds or higher-frequency use, a higher-capacity system may be worth considering.

If you are unsure whether this bucket suits your cleaning regime or colour-coding policy, our team is happy to talk it through.

The SYR Kentucky mop head is a traditional looped-end cotton mop head designed for wet mopping of hard commercial kitchen floors. Weighing 454g and made from cotton yarn, it fits standard Kentucky wringer buckets and is intended for regular heavy-use cleaning cycles in food service environments.

In a busy kitchen environment, floor hygiene is a daily operational requirement rather than an occasional task. The cotton yarn construction picks up fine food debris and liquid effectively across a wide sweep with each pass, reducing the number of strokes needed to cover a section of floor. The material also holds cleaning solution well, which helps with grease and residue removal during service turnaround or end-of-day cleans.

• Yellow colourway supports colour-coded cleaning systems for kitchen zones
• Cotton yarn construction handles both debris pick-up and liquid absorption
• Compatible with standard Kentucky wringer buckets widely used in commercial kitchens
• Machine washable, allowing reuse across multiple cleaning cycles
• Stay-flat edge design allows the mop head to lie flat against the floor surface

The yellow colour coding is a practical consideration for any kitchen operating a zone-based hygiene system. Using designated colours for specific areas — such as yellow for kitchen floors — reduces the risk of cross-contamination between cleaning zones, which is relevant to food safety compliance.

This mop head suits most commercial kitchens, cafés, and food preparation areas with hard flooring. For sites with exceptionally high footfall or very large floor areas requiring more frequent changes, it is worth considering keeping additional heads in rotation. The cotton construction is machine washable, though laundering frequency will affect overall lifespan.

If you are setting up a full colour-coded cleaning system or need advice on quantities for your site, the team is happy to help you work through what you need.

The SYR twine socket mop head is a straightforward, practical cleaning tool designed for daily use in commercial kitchen and front-of-house environments. Made from cotton yarn twine, it offers reliable absorbency for general floor cleaning duties across a range of surface types.

In a busy kitchen or food service environment, one of the most practical features of this mop head is its colour-coded tag system. Each tag colour corresponds to a designated cleaning zone — for example, keeping food preparation areas separate from washrooms or back-of-house corridors. This helps kitchens maintain basic hygiene discipline without relying solely on staff memory, which matters during fast-paced service periods.

• Colour-coded tag system supports area-specific cleaning routines
• Cotton yarn construction absorbs well and holds up to repeated wringing
• Socket fitting is compatible with the SYR interchangeable handle range
• Straightforward head replacement keeps hygiene standards consistent
• Suits general-purpose floor cleaning across kitchen and front-of-house areas

The socket fitting is designed to work with SYR's range of interchangeable colour-coded handles, which are available separately. This makes it easy to replace worn mop heads without changing handles, and to build a consistent, colour-coded cleaning kit across the site. It is worth confirming handle compatibility before ordering if you are mixing this into an existing cleaning system.

This mop head is well suited to smaller catering operations, cafés, pubs, and school kitchens where a practical, low-cost cleaning solution is needed. Higher-volume operations with more intensive daily cleaning schedules may find a heavier-duty mop head more appropriate for their throughput.

If you are putting together a full colour-coded cleaning system or want advice on which handles to pair with this head, the team is happy to help you get the right combination.

The SYR SYRTEX 16oz mop head is a Kentucky-style looped yarn mop designed for regular floor cleaning in commercial catering and food service environments. It uses a blended SYRTEX yarn construction and fits via an interchangeable socket system, secured with SYR's patented Tuf Ring fitting.

In a busy kitchen environment, cross-contamination control is a practical priority, not an afterthought. The green colour coding makes this mop head straightforward to assign to specific zones — a common requirement under food hygiene policies in catering operations. The stay-flat design helps maintain consistent contact with the floor surface, which matters when you're working quickly during or after a service period. A built-in scrub pad adds some versatility for tougher spots without needing a separate tool.

• Colour-coded green for zone-specific hygiene compliance
• Interchangeable socket fits standard SYR mop handles
• Stay-flat design for even floor coverage
• Built-in scrub pad for localised heavy soiling
• Fully launderable for ongoing use and reduced replacement costs

The interchangeable socket system means the mop head can be swapped between compatible handles without replacing the whole assembly, which helps keep consumable costs manageable in kitchens that go through cleaning materials regularly. Being fully launderable also extends the usable life of each head compared with disposable alternatives.

This mop head is well suited to catering kitchens, food prep areas, and front-of-house environments where colour-coded cleaning protocols are in place. For very high-frequency cleaning programmes or larger floor areas, a heavier-weight mop head may offer better durability between washes.

If you're unsure which mop weight or handle system fits your current cleaning setup, the team is happy to help you work it out.

The OXO Good Grips Stainless Steel Squeegee is a straightforward hand tool designed for clearing water, cleaning fluid, and residue from smooth surfaces. The 10-inch stainless steel blade provides enough width to work efficiently across tiled walls, splashbacks, glazed panels, and similar surfaces commonly found in commercial kitchens and food preparation areas.

In a working kitchen environment, it is most useful during and after cleaning routines — sweeping water from tiled surfaces to reduce slip risk, clearing steamed-up pass windows, or wiping down glazed screens and display panels. It is a light-duty tool suited to daily surface maintenance rather than heavy floor work or large-area tasks.

• Stainless steel blade resists corrosion in wet kitchen environments
• Ergonomic handle reduces hand fatigue during repeated use
• Flexible blade edge follows slightly curved or uneven surfaces
• Includes a suction cup hanger for wall or door storage between uses
• Compact enough to keep at a cleaning station without taking up worktop space

At 141g, it is a lightweight tool and is not intended to replace a floor squeegee or heavy-duty water pusher. For larger surface areas or floor drainage work, a longer-handled or wider-blade tool would be more appropriate.

Well suited to smaller kitchens, front-of-house areas, and serveries where surface cleaning is part of the daily routine. It is also a practical addition to any cleaning kit where tiled walls or glazed partitions need regular attention.

If you are equipping a cleaning station and want to make sure you have the right combination of tools for your site, our team is happy to talk it through.

The SYR Snapper is a flat mop holder designed to work with SYR's range of microfibre mop and drying heads. At 400mm wide, it covers a practical cleaning path suited to kitchen floor areas, service corridors, and front-of-house flooring. The polypropylene construction keeps the unit lightweight without sacrificing rigidity during use.

In a working kitchen, consistency in cleaning equipment matters as much as the cleaning itself. The Snapper is compatible with SYR's colour-coded interchange handles, which means it integrates directly into a zoned cleaning system — keeping mop heads and handles assigned to specific areas and reducing the risk of cross-contamination between food preparation zones, wash areas, and front-of-house spaces.

• Fits SYR FA879, L346, L347, L348, and L349 interchange handles
• Blue colour coding supports designated-zone cleaning protocols
• Compatible with SYR microfibre mop and drying heads
• Lightweight polypropylene construction for ease of use during long shifts
• Flat head design suits smooth floor surfaces across kitchen and service areas

This holder is well suited to kitchens that already run SYR's colour-coded cleaning system, or those looking to introduce a structured approach to floor hygiene. It is a straightforward addition to an existing cleaning kit rather than a standalone solution, so it is worth confirming handle and mop head compatibility before ordering.

If you are building out a full cleaning setup or are unsure which handles and heads to pair with this, the team is happy to point you in the right direction.

The SYR Syntex Kentucky mop head is a traditional-style looped mop head supplied in red as part of a colour-coded cleaning system. It is designed for use in bathrooms, washrooms, and other wet areas where floors are exposed to grease and liquid splashes. A built-in scourer on the underside allows operatives to tackle stubborn marks without reaching for a separate tool.

In a commercial cleaning environment, colour coding matters. Red is conventionally assigned to sanitary areas and washrooms, helping to prevent cross-contamination between zones — a straightforward but important part of maintaining hygiene standards in kitchens, catering facilities, and hospitality venues operating under food safety guidelines.

• Colour-coded red for washroom and sanitary area use
• Built-in underside scourer for removing stubborn floor marks
• Compatible with the SYR red interchangeable handle (part of the SYR colour-coded system)
• Suitable for wet areas including bathrooms, washrooms, and service corridors
• Absorbent construction handles grease and liquid splashes

This mop head is designed to fit the SYR red interchangeable handle, so it integrates directly into an existing SYR colour-coded setup. If you are building out a full colour-coded cleaning kit across multiple zones, it is worth confirming handle compatibility before ordering to avoid mix-ups on a busy site.

Well suited to hotels, pubs, restaurants, care homes, and any commercial site where colour-coded cleaning protocols are in place. For higher-traffic sites requiring more frequent mop head replacement, buying in multiples is a practical approach.

If you are putting together a cleaning system for a new site or have questions about colour zoning, our team is happy to help you work through what you need.

The SYR SYRTEX 16oz mop head is a Kentucky-style colour-coded mop head designed for routine floor cleaning in commercial kitchens, food service environments, and other professional settings where hygiene zoning is a requirement. It uses a specially blended looped SYRTEX yarn, developed for reliable performance on a range of hard floor surfaces.

In day-to-day service, the stay-flat design helps ensure consistent contact with the floor, which matters when cleaning around equipment bases, under counters, and across uneven kitchen floors. The integrated scrub pad adds utility where dried-on soiling needs more attention without reaching for a separate tool. The yarn construction is built to hold up through repeated use and regular laundering, which keeps ongoing replacement costs reasonable in busy operations.

Key practical points worth noting:

• Colour-coded yellow for cleaning zone compliance in HACCP-managed kitchens
• Patented SYR Tuf Ring fitting designed to reduce cross-contamination risk at the socket joint
• Interchangeable socket system compatible with SYR changer handles
• Built-in scrub pad for tackling dried soiling without a separate tool
• Fully launderable, supporting a lower cost-per-use over time

This mop head is intended for use with SYR's compatible changer socket handles — it is not a universal fit for all mop handles, so it is worth confirming handle compatibility before ordering. The yellow colour coding makes it suitable for environments following a strict zone-based cleaning protocol.

Well suited to commercial kitchens, food production areas, cafeterias, and similar sites where colour-coded cleaning equipment is part of a documented hygiene regime. For higher-volume or more demanding sites, heavier-weight options in the SYR range may be worth considering.

If you are equipping a kitchen with a full colour-coded cleaning system or want to confirm compatibility with your existing handles, the team are happy to help.

The SYR Syntex Kentucky mop head is a traditional-style floor mop designed for routine and heavy-duty cleaning in commercial kitchens and food service environments. Presented in yellow as part of a colour-coded cleaning system, it is intended for use in kitchen areas where floors are subject to grease, oil, and general food preparation soiling.

A practical feature of this mop head is the built-in scourer on the underside, which allows operators to tackle stubborn marks and dried-on residue without switching to a separate tool. The yellow colour coding supports compliance with cleaning protocols that designate specific colours for specific zones, helping to reduce the risk of cross-contamination between kitchen and other areas.

• Yellow colour coding for designated kitchen floor use
• Built-in underside scourer for removing stubborn marks
• Designed to fit the SYR yellow interchangeable handle (colour-coded system)
• Absorbent construction suited to grease and oil pickup

This mop head is designed to fit the SYR yellow interchangeable handle, so it is worth confirming handle compatibility before ordering if you are adding it to an existing cleaning kit rather than starting fresh. It is a replacement or top-up item rather than a standalone solution.

Well suited to kitchens of any size that already operate a colour-coded cleaning regime, or those looking to introduce one. If your site has particularly high footfall or larger floor areas requiring more intensive daily cleaning, it may be worth discussing higher-capacity or more absorbent options with us before purchasing in bulk.

If you have questions about building out a colour-coded cleaning system or want to check compatibility with your existing handles, we are happy to help.

This is a replacement and interchangeable handle from SYR's colour-coded cleaning system range. The blue handle is designed to fit all SYR mop heads and broom heads within the interchangeable system, allowing a single handle to be swapped between different heads as required. Blue is the designated colour for bars and licensed areas within standard colour-coded hygiene protocols.

In busy front-of-house and bar environments, colour coding is a practical way to prevent cross-contamination between different cleaning zones. Using a dedicated blue handle for the bar area means staff can work quickly without stopping to check whether equipment has been used elsewhere — a straightforward hygiene control that also satisfies food safety audit requirements.

The interchangeable design means you can maintain a smaller stock of handles while running multiple heads for different tasks, which keeps storage tidy and reduces unnecessary outlay. Sold individually, so you can build out your cleaning kit incrementally or replace a single handle without purchasing a complete set.

If you're setting up a full colour-coded cleaning system across multiple zones, it's worth making sure your handle and head selections are consistent across the range. The team is happy to help you work out what's needed for your setup.

The SYR Syntex Kentucky mop head is a traditional-style cotton mop designed for general floor cleaning in commercial environments. The green colour coding identifies it for use in public areas — part of a broader colour-coded system that helps kitchens and facilities teams avoid cross-contamination between zones. A built-in scourer on the underside of the mop allows operators to tackle stubborn marks and dried-on residue without switching to a separate tool.

In practice, this mop head is well suited to the kind of routine floor maintenance that happens throughout a service — mopping up grease, liquid spills, and general soiling on hard floor surfaces. The cotton construction absorbs liquids effectively, and the open-spread design provides reasonable coverage for corridors, front-of-house areas, and other public-facing spaces.

• Green colour coding for use in designated public or front-of-house areas
• Built-in scourer removes stubborn floor marks without a separate tool
• Designed to fit the SYR green interchangeable handle as part of the colour-coded system
• Absorbs greases and liquids from hard floor surfaces
• Traditional Kentucky construction with reliable all-round floor coverage

This mop head is designed to fit the SYR green interchangeable handle, so it's worth confirming you have the correct handle before ordering if you're replacing a head rather than starting fresh. Replacement heads should be changed regularly in busy environments — a saturated or worn mop head becomes less effective and harder to wring out properly.

This is a practical, everyday cleaning consumable suited to most commercial kitchens, hospitality venues, and public-facing facilities. If you're unsure which colour zone applies to your cleaning protocols, or whether this specification is right for your floor type and service volume, we're happy to help you work through it.

The SYR Clip-It II is a colour-coded plastic holder designed specifically for use with SYR Kentucky mop heads. The clip mechanism uses a set of secure teeth to grip the mop head firmly, keeping it in place during use and reducing the risk of it loosening mid-task. It is compatible with SYR's range of interchangeable handles, making it straightforward to integrate into an existing SYR cleaning setup.

In a commercial kitchen or catering environment, colour-coding cleaning equipment is a practical hygiene measure that helps staff use the correct equipment in designated areas — for example, keeping red-coded items to washroom or front-of-house floor zones away from food preparation areas. Supplying these holders in packs of ten makes it sensible for sites that need to equip multiple mop stations or maintain spare stock without frequent reordering.

These holders are well suited to contract caterers, hotel housekeeping teams, school kitchens, pub groups, and any site operating a structured colour-coded cleaning regime. They are a straightforward consumable rather than a capital purchase, but getting the right holder for your mop head type does matter — a poor fit affects both cleaning efficiency and staff confidence in the equipment.

If you are building out or refreshing a colour-coded cleaning kit and would like to confirm compatibility with your existing handles or discuss quantities, the team is happy to help.

This Jantex broom and handle set combines a 24" sweep head with an integrated squeegee, giving kitchen and front-of-house staff a single tool that handles both dry debris and liquid spills without needing to swap equipment. The steel handle brings enough rigidity for sustained use across larger floor areas without flex or fatigue.

In a busy commercial environment — whether a kitchen, a pub bar, or a food prep area — floors accumulate a mix of spillages, food debris and fine dust throughout a shift. A combined broom and squeegee allows staff to move liquid away from the sweep path first, then clear dry debris in a single pass, which is a more practical approach than working back and forth with separate tools. The 24" head covers reasonable ground quickly, making it useful for open kitchen floors, back-of-house corridors and service areas.

Practical benefits for day-to-day use include:

• Combined sweep and squeegee action reduces the number of tools staff carry between tasks
• Suitable for stone, tile, laminate and similar hard floor surfaces common in commercial kitchens
• Steel handle construction holds up to repeated daily use in demanding environments
• 24" head width covers open floor areas efficiently during and after service
• Integrated squeegee is useful for clearing standing liquid before sweeping — relevant in bar areas or wet prep rooms

No installation requirements apply. The set is ready to use out of the box and requires no fixings or assembly beyond attaching the handle. Storage space for the full assembled length of approximately 1677mm should be considered when planning cleaning equipment storage areas.

This set is a practical choice for pubs, cafés, school kitchens, and smaller food service operations where staff need a versatile, everyday floor cleaning tool. For high-traffic sites generating heavy debris volumes across large floor areas, a wider or more heavy-duty broom head may be worth considering.

If you're unsure whether this fits your cleaning equipment requirements, the team is happy to help you work it through.

The SYR TC20-R is a 13-litre Kentucky mop bucket and wringer designed for routine floor cleaning in commercial kitchens, cafés, pubs, and similar food service environments. It handles the everyday demands of mopping up spills, post-service floor cleaning, and ongoing hygiene maintenance during a busy shift.

Built from recycled plastic, the bucket is robust enough for regular daily use without being overly heavy when filled. The integrated wringer is sized to accept Kentucky mops ranging from lighter 340g heads up to heavier 510g heads, giving operators some flexibility in the mop weights they already stock. Smooth-rolling 75mm castors make it easy to move around a kitchen floor without lifting, which matters when the bucket is full and the service is still running.

From an operational standpoint, the yellow colour coding is the most practically significant feature in a busy kitchen. Effective colour-coded cleaning systems reduce the risk of cross-contamination between floor-cleaning equipment and other cleaning tasks — something environmental health inspectors will look for. Key practical points include:

• Yellow colour coding supports HACCP-compliant cleaning systems
• Accepts Kentucky mop heads from 340g to 510g
• Castors allow movement without lifting a full bucket
• Recycled plastic construction is durable under regular use
• Integrated wringer keeps the mop head wringing consistent

This bucket is well suited to single-site kitchens, smaller catering operations, and back-of-house cleaning routines where one bucket covers the main floor area. For larger sites with extensive floor space or multi-zone cleaning requirements, a higher-capacity or multi-bucket setup may be worth considering.

If you have questions about building out a colour-coded cleaning system for your site, the team is happy to help you think it through.