Tumble Dryers

The Maytag MDE20MNTGW is a 10.5kg capacity vented tumble dryer built for commercial on-premise laundry use. It is a front-loading, electrically heated machine designed to handle continuous throughput in environments where reliability and ease of operation matter more than elaborate controls. The Turbovent system is a notable design feature that allows flexible venting arrangements, including longer duct runs, which can be useful where the machine cannot be sited directly against an external wall.

In practice, this dryer is well suited to low-to-medium volume laundry operations running regular daily loads. The four-roller drum suspension with permanently lubricated bearings keeps operation smooth and reduces mechanical wear over time, which matters in settings where the machine is in use most days. The porcelain enamel drum interior is durable and resists odour retention, which is a practical consideration for any site handling linen or workwear regularly.

From an operational standpoint, the key advantages this machine offers include:

• Flexible venting via the Turbovent system, accommodating longer or non-standard duct runs
• Simple, straightforward controls that require minimal operator training
• A large door opening that makes loading and unloading quicker during busy periods
• Robust drum suspension that supports consistent daily use without excessive maintenance
• Porcelain enamel interior that is easy to wipe down and resists staining

Installation requires a suitable vented exhaust route — this is not a condenser machine, so a duct to outside air is essential. The unit runs on a single-phase electrical supply and at 52.2kg it can be manoeuvred by two people, though access to the installation point should be considered before delivery. It is not suitable for stacking without the appropriate manufacturer-approved kit, and siting should allow reasonable clearance at the rear for the vent connection.

This model is a practical choice for guest houses, small hotels, care homes, beauty and therapy salons, or any site processing modest but regular laundry volumes. For operations with heavier or more continuous demands — such as larger hospitality sites or commercial linen services — a higher-capacity machine would likely be a better fit. Equally, if a vented exhaust is not feasible, a heat pump or condenser alternative may be worth considering.

If you are unsure whether this machine matches your site's volume or installation constraints, the team is happy to talk through the details with you before you commit.

The Maytag MLE22PRTGW is a ready-stacked washer and vented dryer combination supplied as a single integrated unit. Rather than pairing two separate machines, it brings the full wash and dry cycle into one compact column, making it a practical choice for professional sites where laundry demand is consistent but floor space is genuinely constrained.

In operational terms, the washer is built around Maytag's DuraCore Drive System, which is rated to withstand 15,000 cycles — a meaningful figure for sites running multiple loads per day across a working week. The high-speed extraction cycle reduces residual moisture before items transfer to the dryer, which in turn shortens drying time and keeps the overall turnaround per load manageable. The Turbovent drying system offers some flexibility in how the machine is vented, which is useful on sites where a straight external duct run isn't straightforward.

From a practical standpoint, the key advantages of this unit include:

• Full wash-and-dry capability within a single machine footprint
• High-speed extraction reducing carry-over moisture into the drying cycle
• DuraCore Drive rated for long-term heavy use with consistent cycle volumes
• Programmable controls to set cycles appropriate for different linen or workwear types
• Turbovent system offering installation flexibility where ducting is a practical challenge

Installation requires careful consideration. At 169kg, the unit will need adequate structural floor support, and the stacked height of 1880mm means ceiling clearance and access routes need to be checked before delivery is booked. This is a vented dryer, so a suitable external duct outlet is required — condensing installation is not an option with this model. Electrical and water connections will need to be in place and accessible at the intended location. Given the combined weight and height, it is worth confirming the installation route and final position before the machine arrives on site.

This unit is well suited to smaller professional operations — guesthouses, small hotels, care homes, staff uniform laundering in catering environments, or any site that processes a steady daily volume of linen or workwear but cannot accommodate two full-size machines side by side. For higher-volume operations processing large quantities continuously across long shifts, a heavier-duty dedicated washer and separate dryer arrangement is likely to serve better.

If you are unsure whether this unit matches your site's output requirements or installation constraints, our team is happy to talk it through before you commit to a purchase.

The Maytag MDG28PRTGW is a front-loading gas vented tumble dryer built for commercial laundry environments where reliability and consistent throughput matter. With a 10.5kg rated commercial capacity, it sits in a practical mid-range position — substantial enough to handle steady daily loads in smaller hospitality or care settings, without the footprint of a full industrial machine. Gas heating offers faster heat-up times compared to equivalent electric models, which can make a meaningful difference when cycling through multiple loads across a shift.

In operational terms, this dryer performs well in environments with a predictable but moderate workload — think a small hotel, bed and breakfast, care home, or owner-operated laundrette where demand is consistent rather than relentless. The vented design means moisture is expelled externally, so installation requires access to an appropriate external vent outlet. Gas supply and a suitable flue connection will also need to be in place before installation; this is not a simply plug-in appliance, and a qualified engineer should handle the gas connection.

Practical points worth considering:

• Gas operation typically reduces running costs compared to electric drying at equivalent load sizes
• The large reversible door aids loading and unloading in tighter laundry rooms
• Front panel access simplifies routine maintenance and reduces engineer call-out time
• The steel construction with porcelain-enamel top resists the wear of continuous commercial use
• Vented rather than condenser — external ducting is a hard installation requirement

This model is best suited to smaller commercial operators who need a dependable workhorse for daily use rather than a high-throughput facility running back-to-back cycles under heavy industrial demand. If your site processes significantly higher volumes or requires continuous operation across long shifts, a higher-capacity commercial model may be more appropriate for your needs.

If you're unsure whether the capacity or gas specification is right for your site, our team is happy to talk through your requirements before you commit to a purchase.

The Maytag MDE28PRTGW is a front-loading, electrically heated vented tumble dryer built for commercial laundry environments. It handles a 10.5kg load capacity and exhausts moisture through a vented outlet, making it suited to operations that run consecutive drying cycles through a shift rather than occasional domestic-style use.

In practice, this machine is well suited to sites where linen, towels, or workwear need to move through quickly and reliably. The four-roller drum suspension system and permanently lubricated bearings are designed to handle sustained daily operation without the mechanical wear issues that can affect lighter-duty machines pressed into commercial roles. The Turbovent system gives genuine flexibility when routing the exhaust, accommodating longer or more complex duct runs that would cause problems for standard venting arrangements — useful where the laundry room layout isn't straightforward.

Operationally, the practical benefits include:

• Large door opening makes loading and unloading quicker and easier during busy periods
• Simple controls reduce the chance of operator error across different staff members
• Turbovent system supports versatile exhaust routing for awkward room layouts
• Porcelain enamel drum interior is durable and resists staining from repeated use
• Steel construction with full-wrap console protects internal components from the knocks of a working environment

Installation requires a suitable electrical supply and a properly routed external vent exhaust — the room must have adequate ventilation, and the duct run should be planned before installation to avoid restricted airflow. At 67kg, the machine is manageable to position but will need appropriate access during delivery. It is designed for floor-standing installation and is not suitable for stacking without the correct manufacturer-approved kit.

This dryer is well suited to small hotels, guest houses, care homes, salons, and similar sites with a consistent but moderate daily laundry requirement. For higher-volume operations running multiple shifts or very large linen loads, a heavier-duty commercial machine with a larger drum capacity would be worth considering.

If you're unsure whether this model matches your site's throughput or installation setup, the team is happy to talk it through before you commit.

The Miele PDR908 is a freestanding commercial vented tumble dryer with an 8kg load capacity and a 130-litre drum. It is built for frequent, sustained use in environments where laundry throughput is a daily operational requirement rather than an occasional task. The stainless steel front panel reflects the standard expected of professional laundry equipment, and the M Touch Flex digital control system gives operators straightforward, consistent programme selection without unnecessary complexity.

In practice, this machine is well suited to settings that generate a steady flow of laundry across a working day — hotel linen rooms, residential care homes, nurseries, hairdressing salons, and similar environments where reliability over repeated cycles matters more than raw speed. The 5.47kW single-phase electrical supply means it can be installed without the three-phase infrastructure that heavier commercial laundry equipment requires, which simplifies placement in smaller back-of-house areas. Vented drying suits facilities where a permanent external duct can be installed, and it tends to be the more cost-effective route where that option exists.

Key practical advantages for day-to-day operation include:

• Digital M Touch Flex controls reduce operator error and allow consistent programme repeating
• Single-phase supply broadens installation options across smaller sites
• Vented operation avoids the moisture management considerations of condenser alternatives
• Stainless steel front is robust and straightforward to keep clean in a busy workroom
• Designed for intensive use cycles, reducing downtime risk during peak laundry periods

Installation requires a suitable external vent duct run and a 25-amp single-phase supply. The machine weighs 51.5kg, so positioning should be planned before delivery, particularly if it is destined for an upper floor or a room with restricted access. It is worth confirming ventilation routing with your installer at the planning stage, as duct length and bends can affect drying efficiency. For sites with significantly higher daily volume, a larger-capacity or higher-throughput model may be worth considering alongside this one.

This dryer is most appropriate for small to medium hospitality and care environments where laundry is processed in manageable batches throughout the day rather than in large continuous runs. It is less suited to high-volume central laundry operations where multiple machines or larger drum capacities would be more practical.

If you are unsure whether the PDR908 is the right fit for your site's laundry volume or installation setup, the team is happy to talk it through with you before you commit.