Furniture

This set of six lattice-back dining chairs is made from rubberwood finished in a deliberately distressed vintage style. The open lattice back and drop-in seat design give each chair a period character that sits comfortably in pub dining rooms, independent restaurants, cafés, and club venues where a more traditional or rustic aesthetic is intended. The seat pads are upholstered in Shetland Scarlett red vinyl, which brings a strong colour accent and is straightforward to wipe down between covers.

Rubberwood is a dense, stable hardwood that holds up well in commercial settings. It resists the racking and joint fatigue that cheaper softwood or MDF-framed chairs often develop under the daily movement of a busy dining room. The distressed finish means minor surface marks tend to blend in rather than stand out, which is a practical advantage in high-turnover environments.

• Contract-quality rubberwood construction suitable for commercial hospitality use
• CRIB 5 fire retardancy standard met, as required in most UK licensed premises
• Vinyl seat pad wipes clean quickly between sittings
• Vintage distressed finish absorbs everyday wear without obvious marking
• Supplied as a pack of six, reducing per-unit cost for larger rollouts

These chairs are sold in packs of six, which suits operators furnishing a section or completing a room rather than replacing individual pieces. They are appropriate for most standard dining spaces. Venues needing a very high chair count, or those with extremely heavy daily throughput such as large-capacity event spaces, may want to consider a heavier-duty frame specification.

If you are unsure whether the finish, seat colour, or construction grade is the right fit for your venue, we are happy to talk it through before you commit to an order.

The Thame is a contract dining chair designed for hospitality environments where seating takes daily punishment from multiple sittings, varied users, and regular cleaning cycles. Built from rubberwood with reinforced mortise and tenon joints, it draws on a traditional mid-century silhouette that suits a wide range of dining room styles — from relaxed pub dining to more formal restaurant settings. This listing is for a pack of six chairs, finished in a muted weathered oak and upholstered in Bison Cedar green vinyl.

In practice, rubberwood is a sensible choice for contract furniture. It is dense, reasonably hard-wearing, and holds joinery well — which matters when chairs are repeatedly dragged, stacked, or knocked in a busy dining room. The mortise and tenon construction is the right approach for a chair that will see sustained commercial use, as it resists the racking forces that tend to loosen cheaper dowel-jointed frames over time. The vinyl seat upholstery is straightforward to wipe down between covers, and the CRIB 5 fire retardancy rating makes it compliant for licensed and hospitality premises in the UK.

• Rubberwood frame with reinforced mortise and tenon joints for long-term durability
• Weathered oak finish suits a range of casual and mid-market dining aesthetics
• Bison Cedar green vinyl seat — wipe-clean and resistant to spills
• CRIB 5 fire retardancy compliance for UK hospitality and licensed premises
• Sold as a six-pack, suited to smaller dining rooms or supplementing existing seating

There are no installation requirements beyond basic assembly if applicable. At a combined pack weight of 48kg, delivery and in-room placement is manageable without specialist equipment. The chair's footprint is modest, making it practical for tighter dining floor plans where space between covers is limited. It is worth noting that rubberwood, while suitable for standard hospitality use, is not the most robust material available for very high-turnover operations — venues with exceptionally heavy footfall may want to consider a heavier-duty frame construction.

The Thame is a practical choice for restaurants, cafés, boutique hotels, and pub dining rooms looking for a chair that balances a traditional aesthetic with contract-grade construction at a reasonable per-unit cost. It suits mid-market settings well. For venues with more intensive seating demands or a preference for a different finish or upholstery colour, it is worth exploring the broader range before committing to a pack quantity.

If you are furnishing a new dining space or replacing a larger volume of seating, we are happy to talk through what works best for your layout and service style before you place an order.

The Elite double door padlock locker is a two-compartment, flat-top steel locker designed for high-traffic changing environments. Each unit is constructed from powder coated steel with a welded frame, reinforced doors, and an antibacterial surface coating that inhibits the spread of bacteria including MRSA and E. coli. The padlock-style door arrangement means no built-in lock mechanism to fail or replace — users supply their own padlock, keeping maintenance straightforward.

In busy facilities where lockers take sustained daily use from large numbers of people, build quality matters considerably. The welded steel frame and reinforced doors are well suited to the kind of repeated, sometimes forceful use common in leisure centres, swimming pools, and school changing rooms. The antibacterial coating is a practical consideration for any environment where hygiene standards need to be demonstrable, not just assumed.

From an installation standpoint, the units come with pre-drilled holes in the rear panel, which allows them to be fixed flush to a wall or nested side by side in banks. This keeps runs of lockers stable and prevents movement over time — a common issue with free-standing units in high-footfall areas. Key practical points to bear in mind:

• Antibacterial coating inhibits MRSA and E. coli — suitable where hygiene compliance matters
• Pre-drilled rear fixings allow wall-mounting or bank installation
• Padlock fitment keeps lock maintenance with the user, not the facility
• Flat-top design allows units to be stacked or topped without wasted space
• Powder coated steel finish is durable and straightforward to wipe down

These lockers are well suited to leisure facilities, swimming pools, sports clubs, schools, and similar sites where volume of daily use is high and hygiene is a regular consideration. For sites requiring a larger per-user storage volume or additional security features such as integrated combination or key locks, alternatives are available within the range.

If you are fitting out a new changing area or replacing existing lockers and would like guidance on configuration, quantities, or fixing arrangements, the team is happy to talk it through before you order.

This 700mm square table top from Bolero is a straightforward, practical surface option for front-of-house use in cafés, bars, restaurants, and similar hospitality settings. It comes pre-drilled to fit Bolero's range of table bases, which removes the need for any bespoke drilling on site and simplifies assembly considerably. The wenge grain finish gives it a warm, wood-effect appearance without the maintenance demands of real timber.

Constructed from high density woodchip with a heat-sealed decor surface, the top is designed to withstand the everyday knocks of a busy service environment. The heat-sealed finish resists moisture and surface heat, so it holds up reasonably well against spilled drinks, damp cloths, and warm crockery. The seamless surface has no joints or exposed edges that would trap food debris, which keeps cleaning between covers quick and straightforward.

At 700mm square, this is a well-suited size for a table for two — practical for covers-focused operators who need to make efficient use of floor space without cramping guests. Key practical points worth noting:

• Pre-drilled fixings reduce on-site fitting time significantly
• Heat-sealed surface resists moisture and light heat contact
• Seamless top surface wipes clean easily between services
• Wenge grain finish suits a range of interior styles
• Compatible with Bolero's standard table base range

It is worth confirming base compatibility before ordering, particularly if you are working with an existing base or a non-standard fixing pattern. If you are equipping a larger venue or need a different size or finish, there are other table top options in the range worth considering.

If you are unsure which base pairing or size works best for your layout, the team are happy to help you work through the options before you commit.

This is a solid timber barstool from Bolero, built around a lacquered oak frame with a distinctive metal cross backrest and a treated rattan seat pad. The natural finish gives it a straightforward vintage character that works well in a range of settings without leaning too heavily in any one stylistic direction.

Bolero furniture is widely used in commercial hospitality environments, and this barstool reflects that practical focus. The lacquered oak frame offers reasonable resistance to the knocks and spillages typical of a busy bar or café counter, and at 6.5kg it is substantial enough to feel stable underfoot without being cumbersome to reposition when needed. The rattan seat pad adds a degree of comfort suitable for mid-length customer dwell times — appropriate for a bar counter or high café table rather than a setting where guests will be seated for extended periods.

A few things worth considering before ordering:

• Sold individually — plan quantities carefully for your seating layout
• The rattan seat pad will require periodic inspection in high-traffic environments
• Best suited to indoor use; not recommended for uncovered outdoor settings where moisture may affect the materials
• Works well alongside other natural wood or industrial-finish furniture

This stool suits bars, café counters, restaurant high-tops, and similar hospitality environments where a clean, unfussy aesthetic is preferred. It is a good fit for operators furnishing at a sensible price point without compromising on build quality. For sites requiring heavier-duty contract-grade seating or specific stackability, it is worth exploring other options in the range.

If you are fitting out a new space or replacing existing seating and would like to talk through quantities or mix-and-match options, the team is happy to help you work through it.

This hoop back dining chair pairs a classic bistro-inspired silhouette with a weathered oak rubber wood frame and a Bison Bordeaux upholstered seat. Sold in packs of two, it is a practical choice for operators furnishing dining spaces where a consistent, considered look matters without an overly formal feel.

Rubber wood is a reliable choice for commercial seating — it offers reasonable density and stability, holding up well in everyday front-of-house use across restaurants, cafes, hotel dining rooms, and similar hospitality venues. The weathered oak finish suits both contemporary and more traditional interiors, and the Bordeaux seat colour adds warmth without being difficult to coordinate. At 8kg per chair, the frames are substantial enough to feel quality without being impractical to reposition during service.

Key practical points worth noting:

• Rubber wood construction offers a good balance of weight and durability for front-of-house use
• Upholstered seat provides comfort for extended dining covers
• Weathered oak finish suits a range of venue aesthetics from casual bistro to boutique hotel
• Sold in pairs, making it straightforward to order in multiples aligned to table covers
• Compact footprint works well in tighter dining layouts

These chairs are suited to standard indoor dining environments. Upholstered seating in high-spillage areas will require a regular cleaning and inspection routine to maintain appearance over time. For venues with very high turnover or particularly demanding conditions, it is worth considering whether a fully hard-wearing frame with a removable seat pad might be a more practical long-term option.

Well suited to independent restaurants, café-bars, boutique hotels, and event spaces looking to furnish dining areas with a cohesive, characterful aesthetic. If you are outfitting a larger site or need guidance on quantities and layout, the team is happy to talk it through before you place an order.

This four-door coin return locker from Elite Lockers is a powder coated steel unit designed for staff changing rooms, back-of-house areas, and anywhere that requires secure, individual storage for multiple users. Each door operates independently with a coin return mechanism — users insert a coin to lock, and retrieve it on exit, which removes the need to manage keys or padlocks across a busy team.

In commercial environments where staff turnover is high or shift patterns mean lockers are shared across different users throughout the day, the coin return system works well in practice. It keeps management overhead low and reduces the likelihood of lost keys causing operational disruption. The mechanism is compatible with the current British £1 coin.

The steel construction is finished with a powder coat that incorporates an antibacterial agent, providing resistance to MRSA and E. coli. This makes the unit a practical choice for food production sites, healthcare catering facilities, or any environment where hygiene standards are formally observed and regularly audited. The flat top design avoids dust traps, and the unit can be fixed to a wall to prevent tipping and make efficient use of floor space.

• Coin return locking — no key management required across shift changes
• Antibacterial coating supports hygiene compliance in food and healthcare settings
• Wall-fixable design keeps the unit stable and maximises usable floor area
• Flat top prevents accumulation of dust or stored items
• Black powder coat finish suits most staff facility environments

This locker suits smaller changing rooms or sites where four individual storage compartments are sufficient. For larger teams or higher-volume facilities requiring more doors per bay or additional bays, alternatives with greater capacity are available in the range.

If you're unsure whether a four-door configuration is the right fit for your team size or space, we're happy to talk it through before you order.

This six-door locker unit from Elite provides individual secure storage compartments, each operated by a manual combination lock that removes the need for keys or padlocks. Constructed from powder-coated steel with an antibacterial treatment, it is designed to hold up in environments where hygiene standards are a priority — including catering, food production, and healthcare-adjacent staff areas.

In practical terms, six separate compartments in a single freestanding column means multiple staff members can secure personal belongings within a compact footprint. The manual combination mechanism is straightforward to use and eliminates the ongoing cost and admin of issuing and replacing keys. The antibacterial steel treatment is resistant to MRSA and E. coli, which matters in kitchens and food preparation environments where cross-contamination risks are taken seriously.

• Manual combination locks — no keys to issue, track, or replace
• Antibacterial steel construction resistant to MRSA and E. coli
• Pre-drilled rear mounting points for secure wall fixing
• Powder-coated finish in red — practical for colour-coded zoning
• Compact column format suits space-limited changing areas

At 1800mm tall with a 300mm square footprint per column, this unit works well in narrow changing rooms or corridors. It can be wall-fixed via the pre-drilled holes at the rear, which is advisable wherever the unit will be accessed regularly or located in a high-traffic area. At 32kg, installation is manageable but a two-person fit is sensible. The red finish lends itself to colour-coded storage systems, useful where operators need to distinguish departments or access levels visually.

This locker is well suited to catering operations, food production sites, schools, and leisure facilities where a compact, hygienic personal storage solution is needed for staff. For larger teams requiring more doors in a single run, wider multi-column configurations are available. If you are fitting out a full changing area and want to think through layout, capacity, or colour-coding, we are happy to talk it through before you order.

This is a single door personal storage locker from Elite Lockers, constructed from powder coated steel and fitted with a manual combination lock mechanism. It is designed to provide secure, key-free storage for staff belongings in commercial environments where reliable access control and hygiene standards both matter.

The powder coating applied to this locker carries antibacterial properties, which makes it a practical choice for changing rooms and staff areas attached to food production or healthcare-adjacent environments, where surface hygiene is taken seriously. The green finish is durable and resistant to the knocks and general wear that come with busy back-of-house use.

From an operational standpoint, this locker is straightforward to manage. There are no keys to issue, track, or replace — staff set their own combination, which simplifies administration in sites with shift-based rotas or high staff turnover. Practical features include:

• Antibacterial powder coat finish for hygiene-sensitive environments
• Manual combination lock — no keys to manage or replace
• Reinforced door construction for added security
• Welded plinth base for stability on level floors
• Pre-drilled nesting holes for wall fixing or locker bank assembly

At 450mm deep, the locker provides a usable internal space suited to storing personal clothing, footwear, and small personal items. The tall profile means it can accommodate hanging garments, which is a practical consideration for staff who need to change into or out of uniforms at the start or end of a shift.

Installation is straightforward. The pre-drilled nesting holes allow the unit to be wall-fixed or joined into a bank of lockers, which is worth considering at the planning stage if you are fitting out a larger changing facility. The welded plinth base keeps the unit stable on flat flooring without any additional levelling hardware. No electrical or plumbing connections are required.

This locker is well suited to catering businesses, food production sites, and hospitality venues that need reliable, hygienic staff storage. For operations requiring larger locker banks or additional door configurations, alternatives within the range are worth exploring. If you are unsure about the right specification or quantity for your site, we are happy to talk it through.

The Elite eight-door electronic combination locker is a freestanding steel locker bank offering individual lockable compartments, each secured by an electronic combination lock rather than a keyed cylinder. The sloping top discourages items being stored on the unit and helps maintain a tidy installation. The white powder-coated finish includes an antibacterial coating that is effective against common pathogens including MRSA and E. coli, which makes it a practical choice where hygiene standards need to be maintained consistently.

The welded steel frame and reinforced doors are built to handle the kind of daily wear that comes with high-footfall environments. In settings where staff are coming and going throughout the day — shift changes in food production units, back-of-house areas in hospitality venues, or larger kitchen operations with sizable teams — the electronic lock removes the need to manage physical keys, which reduces the operational overhead of lost or copied keys and the associated security risk.

Practical advantages for day-to-day operation include:

• Electronic combination locks eliminate key management entirely
• Antibacterial coating supports hygiene compliance in food-sector environments
• Sloping top prevents unauthorised storage and maintains a clear sightline
• Pre-drilled nesting holes allow wall-fixing to prevent movement during use
• Powder-coated steel construction resists knocks and surface damage over time

Installation is straightforward. The unit is freestanding and does not require any electrical connection — the electronic locks are battery-operated. Pre-drilled holes in the rear panel allow the bank to be fixed to a wall, which is advisable in busy corridors or changing areas where the unit might otherwise shift over time. At 33.5 kg the unit is manageable for two people to position but worth planning for on delivery day. No special floor loading considerations apply for standard concrete or solid floors.

This locker bank is well suited to catering and hospitality back-of-house areas, food production facilities, gyms, leisure centres, and schools where staff require secure personal storage. Eight compartments in a single bank suits small-to-medium teams. Where a larger operation requires more capacity across a single run of lockers, banks of this type are generally available in varying door configurations, and it is worth considering the full layout before ordering to ensure the run works within the available wall space.

If you are fitting out a staff area and want to talk through the number of banks, layout options, or fixing requirements, we are happy to help you get the specification right before you order.

This is a double door steel locker from Elite Lockers, finished in a robust epoxy polyester powder coated paint in red. Each unit houses two individual compartments stacked vertically, each secured by a camlock — a straightforward, key-operated locking mechanism that requires no padlock and keeps the front face clean and uncluttered. A welded plinth sits between the two doors, which reinforces the dividing point and reduces the risk of one compartment being accessed via the other. The doors themselves are reinforced to resist warping and everyday impact in working environments.

In practical terms, this locker is built for regular daily use in staff changing areas, back-of-house corridors, sports facilities, and similar environments where durability matters. The powder coated finish is resistant to knocks, minor abrasion, and routine cleaning products, making it a sensible choice for areas that see consistent footfall and aren't always treated gently. The red finish makes it easy to colour-code storage areas by department or team, which can be a useful organisational tool in larger operations.

• Camlock securing on each door keeps the front profile neat and removes the need for padlocks
• Welded inter-compartment plinth improves security between the two bays
• Reinforced doors help the unit hold its shape over years of regular use
• Powder coated finish cleans down easily and stands up to everyday wear
• Red finish supports colour-coded storage systems across larger sites

Installation is straightforward — the locker is freestanding and requires no fixing to the wall, though anchoring to the floor or wall is advisable in high-traffic areas or where units will be stacked or banked together. At 21.5kg the unit is manageable for two people to position. No electrical or water connections are required.

This locker is well suited to catering operations, hospitality venues, leisure facilities, and light industrial environments needing reliable, no-fuss staff storage. If you're fitting out a larger changing area and need guidance on quantities, configurations, or alternative sizes, the team is happy to help you plan the layout before you order.

The Elite six-door coin return locker is a free-standing, multi-compartment storage unit built from powder coated steel. Each of the six independently secured compartments operates via a coin return mechanism, meaning the user inserts a coin to lock the door and retrieves it on exit — removing the need for key management and reducing the administrative burden on facilities and kitchen management teams.

In commercial catering and hospitality environments, staff locker provision is a practical requirement rather than an afterthought. These units are built with that in mind. The powder coated steel frame is reinforced at the doors, and a welded plinth at the base adds structural rigidity during everyday use across busy shift patterns. The antibacterial surface coating has been tested against MRSA and E-coli, which makes these lockers appropriate for food production sites, healthcare catering operations, and similar environments where hygiene standards are closely monitored.

Practical advantages for day-to-day operation include:

• Coin return locking — no keys to manage or replace
• Compliant with the current £1 coin specification
• Antibacterial coating across surfaces, relevant for food-safe environments
• Reinforced doors and welded plinth for durability under regular use
• Flat top design allows units to be stacked or placed side by side efficiently

At 1800mm tall and with a compact 300mm depth, the unit is well suited to staff corridors, changing rooms, or back-of-house areas where space is limited. The 26.3kg weight means two-person installation is advisable, and the unit should be positioned on a level floor. No electrical or plumbing connections are required.

This locker is a practical choice for smaller catering teams or sites needing modest, manageable staff storage. Larger operations or sites with higher staff headcounts may find a wider or additional unit more suitable. If you are unsure how many compartments or units your site requires, we are happy to help you work through the options before you order.

This is a four door combination locker from Elite Lockers, manufactured in powder coated steel and finished in red. Each compartment is secured with a manual combination lock mechanism, removing the need for keys and the day-to-day management that comes with them. The flat top design allows units to be stacked or placed side by side without wasted space.

In commercial catering and food service environments, staff changing and storage areas are subject to strict hygiene requirements. The anti-bacterial coating on these lockers provides a practical level of protection in areas where cross-contamination risk needs to be managed, including resistance to MRSA and E-coli. The reinforced doors and toughened steel construction are built to withstand the wear of regular daily use across busy back-of-house environments.

From an operational standpoint, these lockers offer a straightforward, low-maintenance storage solution:

• Combination lock mechanism removes the need to manage or replace keys
• Anti-bacterial coating supports hygiene compliance in food service settings
• Powder coated steel construction resists knocks and daily wear
• Red finish aids identification where colour-coded zoning is in use
• Flat top allows flexible configuration and space-efficient installation

At 1800mm tall, these are full-height units suitable for storing clothing, footwear, and personal belongings. The 300mm depth per column is relatively compact, which suits sites where changing area space is limited. Each of the four compartments is independently secured, making the unit appropriate for shared staff areas. The powder coated steel finish, while hardwearing, is not stainless steel, so these lockers are intended for staff areas rather than production or wash-down zones.

These lockers are well suited to catering operations, food production facilities, restaurants, and hospitality venues where staff need secure personal storage in a hygiene-conscious environment. For larger installations or sites requiring a greater number of compartments, wider multi-door configurations are available in the same range.

If you're fitting out a changing area and want to discuss layout, quantity, or colour options, we're happy to help you work through the details before you order.

This is a six-door staff locker unit from Elite, manufactured in powder-coated steel and finished in red. Each door is secured by an individual manual combination lock, removing the need for keys or padlocks. The sloping top is a practical detail that prevents items being left or stored on top of the unit — a common requirement in hygiene-managed environments. The antibacterial-treated steel construction is resistant to MRSA and E. coli, which makes this unit appropriate for food production sites, healthcare-adjacent facilities, and other settings where hygiene standards are closely managed.

In day-to-day use, the manual combination mechanism means staff are not reliant on issued keys, which reduces the administrative burden on supervisors and removes the recurring cost of replacement locks or padlocks when staff turn over. Pre-drilled fixing holes at the rear of the unit allow the locker to be secured to a wall, which is worth doing in any busy changing area where units might otherwise be knocked or shifted during peak changeover periods.

Practical advantages worth noting for operators:

• No keys to issue, track, or replace when staff leave
• Antibacterial steel treatment suitable for hygiene-critical environments
• Sloping top discourages storage of unauthorised items on the unit
• Wall-fixing holes included for added stability and safety compliance
• Red finish aids identification in multi-bank locker installations

At 1,950mm tall, this is a full-height unit that makes use of vertical space. The 300mm depth is relatively compact, which suits tighter changing areas where floor space is limited. At 33kg, installation will require two people. This unit is a single-width, six-door configuration — if your site requires higher-capacity storage across a larger workforce, wider or multi-bay configurations may be a more practical solution.

This locker is well suited to catering and hospitality operations, food production environments, healthcare settings, and any workplace where personal storage needs to meet a basic hygiene standard. It is a sensible choice for sites with moderate staff numbers where a clean, colour-coded changing area is a practical or regulatory requirement.

If you are fitting out a staff area and are unsure how many doors or bays you need, or whether this configuration fits your layout, we are happy to talk it through before you order.

This Elite double door locker is a steel-bodied, manually operated combination locker finished in graphite grey powder-coated steel. It provides two independent lockable compartments without the need for keys or padlocks, making it a practical choice for staff areas where lost keys and lock replacements are a recurring overhead. The sloping top discourages items being stored on top of the unit, which is a common hygiene consideration in food service environments.

The locker carries an antibacterial coating tested as effective against common pathogens including MRSA and E. coli. This makes it particularly well suited to changing rooms and welfare areas adjacent to food preparation or healthcare-adjacent catering environments, where surface hygiene standards matter and lockers receive frequent contact from multiple users across shifts.

From a practical installation standpoint, the unit comes with pre-drilled fixing holes, allowing it to be secured flush to a wall or bolted together with adjacent units in a row. At 22kg per unit, installation is manageable with two people and no specialist equipment. A few points worth considering before ordering:

• Antibacterial surface coating helps maintain hygiene in high-contact staff areas
• Pre-drilled holes allow wall-fixing or side-by-side ganging into rows
• Combination lock removes the need for keys, padlocks, or replacement cylinders
• Sloping top prevents surface accumulation — a practical hygiene measure
• Powder-coated steel construction is durable under daily staff use

These lockers are best suited to single-shift or double-shift operations with a modest number of staff. For larger sites with higher staff turnover or more intensive daily use, heavier-duty or higher-capacity locker configurations may be worth considering. The graphite grey finish suits both utilitarian back-of-house environments and more considered staff welfare spaces.

If you are fitting out a changing room or welfare area and want to make sure you are specifying the right configuration for your team size and space, our team is happy to talk it through with you.

This Elite five door locker unit provides individual lockable storage compartments within a single powder coated steel frame, finished in black. Each compartment is secured by a coin return mechanism, which allows users to retrieve their coin on removal of the key — a practical arrangement that reduces lost key incidents and avoids ongoing padlock management in high-footfall environments.

In busy settings such as leisure centres, sports facilities, schools and workplace changing areas, these lockers hold up well under daily repeated use. The welded plinth and reinforced door construction contribute to a unit that resists the knocks and wear typical of environments where lockers are used by many different people throughout the day. The anti-bacterial coating applied to the steel frame is a considered feature for environments where hygiene standards matter, such as healthcare facilities or food-handling workplaces.

From a practical standpoint, the sloped top serves a dual purpose: it sheds dust and moisture easily, and it discourages users from placing bags or equipment on top of the unit — which helps maintain clear walkways and reduces the risk of items being left unattended.

• Coin return locking mechanism reduces key loss and management overhead
• Anti-bacterial steel coating suited to hygiene-sensitive environments
• Sloped top prevents surface storage and simplifies cleaning
• Pre-drilled rear nesting holes allow straightforward wall anchoring
• Compatible with the current British £1 coin

At 1,950mm tall and 300mm wide per unit, this locker is well suited to spaces where floor area is limited but vertical clearance is available. The 25kg unit weight makes positioning manageable, though wall fixing is recommended for stability in public-facing areas. The relatively shallow 300mm depth suits standard changing room alcoves and corridor-adjacent installations, though it is worth confirming available depth before ordering.

This unit is a practical choice for schools, leisure facilities, gyms, offices and light industrial environments where straightforward coin return storage is needed without the complexity of electronic locking systems. Sites requiring wider compartments, greater depth, or a higher number of doors per unit may find a larger or differently configured model more appropriate for their needs.

If you have questions about fitting these into an existing bank of lockers, or want to discuss the right configuration for your space, the team is happy to help.

These Bolero side chairs are constructed with a PE wicker weave over an aluminium frame, giving the appearance of traditional wicker furniture without the fragility or weather sensitivity associated with natural rattan. The charcoal finish is neutral and works across a wide range of interior and exterior schemes, while the high-back design provides reasonable support for seated dining.

PE wicker is a well-established material choice for commercial hospitality settings. It resists moisture and UV exposure, handles the general wear of regular customer use reliably, and does not require specialist maintenance. The aluminium frame will not rust, making these chairs suitable for covered outdoor areas such as terraces and café courtyards. At 4.1kg per chair, they are light enough for staff to reposition or stack without risking damage to flooring, which is a practical advantage in venues that reconfigure their layout across the day.

• Wipe-clean PE wicker surface — no specialist products required
• Lightweight aluminium frame will not corrode in covered outdoor use
• Neutral charcoal finish conceals everyday marks well in busy settings
• Suitable for mixed indoor-outdoor use across a single service period
• Sold in packs of four, keeping per-unit cost practical for larger schemes

These chairs are well suited to cafés, casual restaurants, hotel terraces, and bar outdoor areas with moderate footfall. They are not designed for heavy contract environments where seating is under sustained, high-volume stress across long service periods — in those situations, a heavier-duty stacking or banquet chair is likely a more appropriate choice.

If you are specifying seating across a larger project or need help matching these chairs to tables already in your range, the team is happy to talk it through before you commit to an order.

The Kilsby is a fixed-height bar chair built for commercial use in bars, restaurants, and hospitality venues. The frame is constructed from rubber wood in a dark walnut finish, with curved rear legs that give it a contemporary profile. Both the seat and backrest are padded and upholstered in a Shetland Smoke fabric, offering a reasonable level of comfort for guests seated at bar counters or poseur-height tables during a typical service period.

In a commercial context, bar seating takes a significant amount of daily use — repeated loading, scraping across floors, and the occasional knock during a busy service. The rubber wood construction handles this reasonably well, and at 12kg the chair is substantial enough to feel stable without being difficult to reposition. The dark walnut finish is well suited to venues with warm or neutral interior schemes.

Practical points worth considering before ordering:

• Padded upholstery on both seat and backrest — guest comfort over extended sittings
• Rubber wood frame — solid and suitable for regular commercial use
• Dark walnut finish — works well alongside natural timber or dark metal interior elements
• Fixed bar height — confirm your counter or table height before ordering
• One-year warranty as standard for commercial use

This chair is best suited to bars, café counters, and restaurant poseur tables where a clean, mid-toned aesthetic is required. It is a single-finish option, so if you are fitting out a larger space or require a different upholstery colour, it is worth reviewing the broader range before committing to a quantity order.

If you are ordering in volume or want to confirm the chair suits your counter height and interior scheme, we are happy to talk it through before you place an order.

This is a full-height, single door storage locker from Elite Lockers, finished in red powder coated steel and fitted with a coin return locking mechanism. The coin return system requires users to insert a coin to release the key, which is returned when the locker is vacated — a practical arrangement that reduces key loss and removes the need for locker management in high-footfall environments.

The welded steel frame and reinforced door construction are built to withstand repeated daily use in busy settings. The powder coat finish includes an antibacterial treatment, which makes these lockers a considered choice wherever hygiene standards matter — food production areas, healthcare-adjacent facilities, or staff changing rooms in catering and hospitality environments. Pre-drilled wall-fixing points are included, allowing the units to be secured back to the wall for added stability, which is particularly relevant when lockers are used in rows or in locations with heavy footfall.

From an operational standpoint, the key practical advantages are:

• No ongoing key management — the coin return system is largely self-administering
• Antibacterial coating supports hygiene compliance in food and health environments
• Wall-fixing points allow secure installation without specialist fittings
• Powder coated steel finish is durable and straightforward to wipe down
• Flat top design avoids dust accumulation and simplifies cleaning routines

At 1800mm tall and 300mm wide and deep, this is a slim, full-height unit suited to individual locker allocation rather than shared or bulk storage. It works well where floor space is limited and individual secure storage is needed. For sites requiring wider compartments or multi-door configurations, larger locker formats are available within the range.

If you are fitting out a staff area and are unsure whether single door units are the right configuration for your numbers, or whether coin return is the most practical locking system for your setup, we are happy to talk it through.

The Origin Base Stool is a compact, fixed-height stool constructed from polypropylene and offered here in light grey as a pack of two. The design is straightforward — clean lines, no padding, no moving parts — which makes it a practical choice for operators who need seating that is easy to maintain and replace as part of a larger scheme.

In a hospitality setting, these stools suit bar counters, high café tables, and casual dining areas where seating needs to be moved, rearranged, or stored away between services. At 2.1kg each, they are light enough for front-of-house staff to reposition without effort. Vertical stacking keeps storage space requirements low during quieter periods or when a space is reconfigured for events.

A few practical points worth noting:

• Constructed from polypropylene containing over 50% post-industrial recycled material
• Lightweight build supports quick floor reconfigurations between services
• Vertical stacking reduces storage footprint when stools are not in use
• Consistent light grey finish suits neutral or monochrome interior schemes
• Sold in packs of two, which is worth factoring into ordering quantities

These stools are best suited to indoor hospitality environments — cafés, bar areas, canteens, and casual dining spaces — where a simple, unfussy aesthetic is appropriate. They are not upholstered and carry no height-adjustment mechanism, so operators should confirm the fixed seat height works with their counter or table specification before ordering. For venues needing a more substantial or weather-resistant option, alternatives are available within the range.

If you are fitting out a new space or matching to existing furniture, the team is happy to discuss quantities, mix-and-match options, or suitability for your specific layout.

This double door locker from Elite is a full-height, powder-coated steel unit fitted with an electronic combination lock. Each locker provides two separate lockable compartments within a single column, making it a practical choice where space is at a premium but individual secure storage is still required. The red powder-coated finish is a factory colour option rather than an afterthought, giving a consistent, professional appearance that holds up well in high-traffic environments.

The welded steel frame and reinforced doors are built to handle daily use in busy changing areas. The electronic lock removes the need to manage physical keys — a meaningful operational advantage in settings where staff turnover is regular or large numbers of users share facilities. The antibacterial coating is effective against MRSA and E. coli, which is a relevant consideration in any environment where hygiene standards are taken seriously, including food production sites, healthcare-adjacent facilities, and commercial kitchens with changing room provision.

From a practical standpoint, this locker suits environments where:

• Individual key management is impractical or creates operational overhead
• Hygiene compliance in staff areas needs to be demonstrable
• A consistent colour scheme or branded aesthetic is required
• Floor space is limited but two separate secure compartments are needed per column

At 1,950mm tall, this is a full-height unit and will require adequate ceiling clearance and a stable, level floor surface for correct installation. At 22kg it can be manoeuvred by two people, though for larger installations it is worth considering how units will be fixed and whether banks of lockers need to be anchored to a wall for stability.

This locker is well suited to staff changing facilities, leisure centres, schools, and food production or hospitality sites where changing room provision is required. For sites needing higher-capacity storage or single-door columns, there are alternative configurations worth considering.

If you are specifying lockers for a larger staff facility or have questions about quantities, configurations, or colour options, the team is happy to help you work through the requirements.

This 700mm square table top from Bolero pairs an ash wood surface with an aluminium frame construction. The ash arrives pre-oiled from the factory, giving it an immediate degree of weather resistance and a clean, natural finish that sits comfortably in bistro, café, and casual dining environments. The aluminium frame does not rust, which matters when the top is used on pavement terraces, beer gardens, or covered outdoor areas where it will see regular exposure to moisture and changing conditions.

At 13.2kg, the top has enough substance to feel settled in use without being awkward to reposition when you are reconfiguring covers between services. The 700mm square format is a practical size for two covers, and works well in arrangements where you need to push tables together for larger groups.

In terms of ongoing care, the ash surface will benefit from periodic treatment with teak oil. This is worth building into a regular maintenance routine — it is not a one-off task at purchase — and done consistently, it will extend the life of the wood and help retain its appearance through sustained outdoor use. Operators running high-turnover outdoor spaces or exposed coastal sites may find the natural wood surface demands more maintenance attention than a composite or high-pressure laminate alternative would.

• Pre-oiled ash surface offers immediate weather resistance straight out of the box
• Rust-resistant aluminium frame suits regular outdoor and covered terrace use
• 700mm square format accommodates two covers comfortably
• Weight provides stability in use without making relayout difficult
• Periodic teak oil treatment maintains the wood finish over time

This top is well suited to cafés, bistros, and casual dining venues that want a natural wood aesthetic with reasonable outdoor durability. For sites with heavier footfall or more exposed conditions, it is worth considering whether a more heavily protected surface would reduce long-term maintenance demands. If you are unsure whether this top pairs with a particular base you have in mind, or whether it is the right choice for your outdoor setup, the team is glad to help you work through it.

This six-door locker from Elite Lockers is a straightforward, well-built personal storage unit designed for staff areas, changing rooms, and other high-use environments. Each of the six individual compartments is secured by a coin return locking mechanism — compatible with the current British £1 coin — meaning users deposit a coin to lock, which is returned when they vacate. The unit is constructed from powder coated steel and finished in black, giving it a clean, hard-wearing appearance suited to both back-of-house and more visible staff welfare spaces.

In busy commercial environments where lockers take regular daily use, build quality matters. The reinforced doors and welded plinth construction keep the unit stable under continuous use, and the compartment separation helps maintain security between individual users. The powder coated steel finish has been treated to resist MRSA and E-coli, which is a practical consideration in food service and healthcare-adjacent environments where hygiene standards are closely monitored.

Operationally, this locker offers several practical advantages:

• Coin return mechanism requires no key management or combination resets between users
• Sloping top prevents dust and debris accumulating on the upper surface, simplifying cleaning routines
• Antibacterial surface treatment supports hygiene compliance in regulated environments
• Welded plinth and reinforced doors provide reliable long-term security
• Self-contained operation — no power supply or installation work required

Being a freestanding unit with no electrical or plumbing requirements, placement is straightforward. At just over 300mm in depth, it has a relatively compact footprint, though the full height of the unit means ceiling clearance and access routes should be considered during delivery and installation planning. The sloping top also means it cannot be stacked.

This unit is well suited to small-to-medium catering operations, hospitality venues, leisure facilities, and healthcare environments where a manageable number of staff need secure personal storage without the overhead of key administration. For larger sites with higher headcounts, configurations with more doors or additional bays may be more practical — our team can help assess what works best for your space and staffing levels.

If you are unsure whether this configuration suits your layout or user numbers, we are happy to talk it through before you commit to an order.

This is a single-door steel locker from Elite Lockers, finished in red with a tough epoxy polyester powder-coated paint. It uses a camlock mechanism, features a reinforced door, and is built with a welded plinth between compartments to improve inter-compartment security. The construction is straightforward and practical — a reliable storage unit designed for busy staff areas rather than a decorative piece.

In commercial catering environments, staff changing and storage areas take a fair amount of daily wear. Doors are opened and closed repeatedly during shift changes, lockers are occasionally knocked during busy periods, and the environment can be humid depending on proximity to kitchen spaces. The powder-coated steel construction and reinforced door are well suited to this kind of routine use without showing rapid deterioration.

The camlock provides a simple, secure closure without the complications of combination mechanisms or shared padlock arrangements. The welded plinth design adds a useful measure of security between adjacent compartments, which matters in shared staff areas where multiple lockers sit side by side.

• Powder-coated steel construction handles daily use in staff areas
• Camlock mechanism offers straightforward individual security
• Reinforced door resists the wear of repeated daily use
• Welded plinth improves security between adjacent compartments
• Red finish aids identification in multi-bank locker installations

At 1800mm tall this is a full-height single-door unit. It is worth confirming ceiling clearance and door-swing space before installation, particularly in tighter changing rooms or corridors. The 21kg weight means it can be positioned by two people without specialist equipment, though anchoring to a wall or floor is advisable once placed.

This locker is a practical choice for catering businesses, hotels, or food production sites needing reliable individual staff storage. It suits small to medium installations equally well. If you are fitting out a larger facility or need a specific colour scheme beyond the standard range, it is worth speaking with the team to discuss what works best for your site.

This is a five-compartment personal storage locker finished in graphite grey powder coated steel, fitted with individual camlocks and a sloping top. Each of the five doors provides a separate lockable space for staff belongings, making this unit a practical solution for changing rooms, staff areas, and back-of-house spaces where personal storage needs to be secure and well organised.

The powder coated steel construction holds up well in both wet and dry environments. The coating is effective against common bacteria including MRSA and E. coli, which matters in catering and healthcare settings where hygiene standards are closely monitored. The graphite grey finish is also reasonably forgiving of everyday marks and scuffs in a working environment.

In practical terms, this locker offers a number of features that suit commercial staff areas:

• Sloping top prevents dust and debris accumulating on the unit surface
• Individual camlock on each door keeps compartments secure
• Pre-drilled rear fixing holes allow wall-mounting or units to be nested together
• Powder coated finish resists moisture and bacterial growth
• Compact footprint allows multiple units to be banked in a corridor or changing room

Installation is straightforward — the unit can be wall-fixed using the pre-drilled holes at the rear, or freestanding units can be lined up side by side. At 25kg this is a manageable weight for two people to position. The 300mm depth is relatively shallow, which suits spaces where floor area is limited, though it does mean the compartments are better suited to clothing and personal items than bulky equipment.

This locker is well suited to catering businesses, restaurants, hotels, and similar operations needing hygienic, secure staff storage in a compact footprint. For sites requiring more compartments or larger individual spaces, wider or taller configurations may be worth considering before committing to a layout.

If you're planning a changing area fit-out and want to talk through quantities, layout, or whether this specification is the right fit for your site, we're happy to help before you place an order.

The Elite six-door combination locker is a manually operated, multi-bay locker unit built from powder-coated steel with a welded frame construction. Each of the six doors is independently accessible and secured via a built-in combination lock mechanism, removing the need for padlocks or keys. The white powder-coated finish gives it a clean, neutral appearance that suits most commercial and institutional interiors.

The welded steel frame and reinforced door construction are intended to hold up under the kind of repeated daily use seen in busy changing areas, staffrooms, and communal spaces. The antibacterial coating is effective against common pathogens including MRSA and E. coli, which makes it a practical choice in environments where hygiene standards are a genuine operational concern rather than a box-ticking exercise.

From a practical standpoint, the unit offers several useful features for facilities managers and operators:

• Combination lock on each door — no key management required
• Antibacterial coating suited to high-hygiene environments
• Pre-drilled nesting holes allow the unit to be fixed flush to a wall
• Powder-coated steel construction is resistant to everyday knocks and surface wear
• Flat top design allows units to be stacked or placed side by side without wasted space

Installation is straightforward. The unit is freestanding and can be secured to a wall using the pre-drilled nesting holes, which helps prevent movement in high-footfall areas. At 32kg, it is manageable for a two-person installation without specialist equipment. No electrical or plumbing connections are required.

This locker is well suited to schools, universities, leisure centres, and staff areas where a shared, key-free locker solution is needed and hygiene is a priority. For larger installations or sites requiring full-height individual lockers, other configurations in the range may be more appropriate.

If you are specifying lockers for a larger fitout or are unsure which configuration best suits your space, our team is happy to talk it through before you commit to an order.

This is a two-door, full-height locker from Elite Lockers, finished in graphite grey powder-coated steel with a manual combination lock on each door. It is designed for staff changing areas, leisure facilities, and similar environments where secure, individual storage is needed without the ongoing cost or logistics of key management.

The welded steel frame and reinforced door construction give this locker the durability expected in high-footfall environments. The powder coating carries an anti-bacterial finish tested to resist MRSA and E. coli, which is a practical consideration wherever hygiene standards are taken seriously — food production sites, healthcare-adjacent facilities, and anywhere staff changing areas are subject to inspection or compliance requirements.

From an installation and layout perspective, the locker arrives with pre-drilled fixing points in the rear panel, allowing it to be secured directly to a wall. This matters in practice: wall-fixed lockers sit flush, close the gap between units, and prevent the accumulation of dust and debris behind and between them — a detail that simplifies end-of-shift cleaning routines considerably.

• Combination lock mechanism removes the need for key management
• Anti-bacterial coating supports hygiene compliance in regulated environments
• Wall-fixing points allow flush installation with no gaps between units
• Powder-coated steel construction suitable for damp or humid changing areas
• Two-door configuration provides separate storage for two users per unit

This locker is well suited to staff welfare areas in catering operations, food manufacturing sites, leisure centres, and similar settings. It is a practical mid-range option where durability and hygiene matter but space per user is limited. For sites needing larger personal storage per user, single-door full-width alternatives may be worth considering.

If you are fitting out a changing area and want to talk through quantities, layout, or whether this configuration suits your site, the team is happy to help before you commit to an order.

This eight-door locker from Elite is a powder-coated steel unit designed for staffrooms, changing areas, and back-of-house environments where secure, individual storage is needed across a team. Each compartment fastens independently with a camlock, providing straightforward key-operated security without the complexity of combination or digital systems. The sloping top panel is a practical detail that prevents items being left on top of the unit and stops dust and debris accumulating — a consideration that matters more than it might first appear in busy back-of-house areas.

The welded steel frame and reinforced doors are built to take the kind of daily contact — bags thrown in, doors pushed shut — that staff lockers typically receive in commercial environments. The powder-coated steel finish carries an antibacterial coating that has been tested against MRSA and E-coli, which makes this model a practical choice for sites with hygiene obligations, such as food production facilities, catering operations, healthcare settings, or anywhere subject to routine cleaning audits.

From a practical installation standpoint, the unit comes with pre-drilled nesting holes to allow wall fixing, which both secures the locker and prevents movement in tighter spaces. Key considerations before ordering include confirming you have suitable wall fixing points and enough clear floor space for doors to open fully on all eight compartments. The white powder-coat finish suits most environments and is straightforward to wipe down.

• Antibacterial coating for environments with hygiene requirements
• Sloping top reduces surface accumulation and simplifies cleaning
• Camlock system provides simple, reliable individual security
• Wall-fixable via pre-drilled nesting holes for a stable installation
• Welded steel frame suits heavy day-to-day staff use

This eight-door configuration suits medium-sized teams where multiple staff need simultaneous access. For smaller teams or tighter spaces, fewer-door variants may be more appropriate; for larger operations, multi-unit configurations or higher-capacity models are worth considering. If you are unsure which configuration suits your site, we are happy to talk it through before you order.

This five door locker unit from Elite Lockers is a straightforward, well-built storage solution for staff changing areas, back-of-house corridors, and other shared spaces where personal belongings need to be kept secure during a shift. Each of the five compartments is fitted with a coin return lock mechanism, which means the key is always returned to the user once the locker is vacated — a practical arrangement that removes the common problem of lost or unreturned keys across a busy team.

The unit is constructed from powder coated steel with a reinforced door design, giving it the kind of structural robustness that holds up well in environments where lockers take regular daily use. The black finish gives a clean, consistent appearance that works well in both back-of-house catering environments and more visible staff welfare areas. The coin return mechanism is compatible with both old and new £1 coins, so no changeover issues arise in day-to-day operation.

For operators in hygiene-sensitive settings, the unit carries a surface treatment providing resistance to MRSA and E. coli — a consideration worth noting for catering, healthcare, and education environments where contamination control is taken seriously.

• Coin return locking keeps keys accounted for across shift changes
• Powder coated steel construction suitable for demanding daily use
• Five individual compartments in a single freestanding unit
• MRSA and E. coli resistant surface treatment for hygiene-critical areas
• Compatible with current and previous £1 coin denominations

This unit suits smaller teams or spaces where a compact five-compartment arrangement is sufficient. For larger staff complements or higher-traffic environments, wider or stacked configurations may be worth considering. If you are fitting out a staff area and want to make sure you have the right quantity and configuration before ordering, the team are happy to talk it through.

This set of six lattice-back dining chairs is built for commercial hospitality use, combining a traditional aesthetic with the practical construction standards that contract furniture requires. The chairs are made from rubberwood with a slightly distressed vintage finish, giving them a considered, characterful look that sits comfortably in relaxed dining rooms, pubs, and club settings without appearing contrived or overly decorative.

Each chair comes fitted with a drop-in seat pad upholstered in Bison Tan brown vinyl — a warm, neutral tone that works well alongside a range of interior palettes. The vinyl covering is straightforward to wipe down between covers, which matters in any venue where seating takes daily punishment. All chairs in this pack conform to CRIB 5 fire retardancy standards, which is a baseline requirement for most licensed hospitality premises in the UK.

From an operational standpoint, the key practical points are:

• CRIB 5 compliant — suitable for licensed and hospitality venues without additional fire treatment
• Rubberwood frame provides reasonable robustness for everyday commercial use
• Vinyl seat pad is easy to clean and resists routine spillage
• Sold as a set of six, reducing per-unit cost for initial fit-outs or partial refreshes
• Vintage distressed finish helps disguise minor surface wear over time

These chairs are well suited to independent restaurants, gastropubs, and café-bar settings where appearance matters but budgets are practical. They are not designed for the highest-turnover environments — venues with very high seating churn or heavy-duty use should consider a heavier-weight contract chair. The pack format makes them a sensible option for smaller dining rooms or when topping up existing stock.

If you're unsure whether this chair is the right fit for your venue's layout or service style, we're happy to talk it through.