Dining Chairs

The Bath dining chair is a solid wood chair with a classic upright silhouette, finished in weathered oak and upholstered in a Bison Smoke vinyl. It is a straightforward, well-constructed seating option aimed at commercial hospitality settings where durability and ease of maintenance matter as much as appearance.

In busy front-of-house environments, chairs take considerable daily wear — constant movement, spills, and the occasional rough handling during service. The Bath chair's solid wood frame provides the structural reliability needed to hold up in these conditions, while the vinyl upholstery wipes clean quickly between covers, keeping tables turned over without delay. The weathered oak finish suits a range of interior schemes, from traditional pub dining rooms to contemporary café spaces, without looking out of place in either.

From an operational standpoint, the key practical advantages are:

• CRIB 5 fire-rated vinyl upholstery, meeting UK commercial venue requirements
• Wipe-clean seat and backrest — no fabric maintenance or specialist cleaning needed
• Sustainably sourced solid wood construction for long-term structural integrity
• Padded seat and back for guest comfort during longer dining occasions
• Supplied as a six-pack, simplifying ordering for full dining room fitouts

Being solid wood, these chairs carry reasonable weight and should be factored into delivery access planning, particularly for venues with narrow corridors or restricted loading areas. They are best suited to indoor use and are not specified for outdoor or covered terrace environments.

The Bath chair is well suited to restaurants, pub dining areas, hotel breakfast rooms, and café settings with mid-to-high footfall. For venues needing stacking capability to simplify storage or room turnaround, or for higher-volume banqueting operations, it is worth discussing alternative configurations before committing to a full order.

If you are fitting out a dining room and want to talk through quantities, finishes, or suitability for your specific setting, the team is happy to help before you place an order.

The Bath dining chair is a solid wood dining chair upholstered in a wipe-clean vinyl fabric, supplied as a pack of six. The frame carries a weathered oak finish and the seat and backrest are covered in Bison Midnight vinyl — a dark, practical choice that sits well in a range of interior styles from casual dining through to pub restaurants and hotel bistros.

In a commercial setting, chairs take considerably more punishment than the domestic equivalent. The Bath is constructed from solid sustainably sourced wood, which gives it the structural rigidity needed for day-to-day stacking, repositioning and the general wear of a busy service. The classic silhouette means it pairs easily with a variety of table styles without looking out of place.

From an operational standpoint, the key practical points are:

• Vinyl upholstery cleans down quickly between covers — important during back-to-back service
• CRIB 5 fire resistance compliance meets the standard required for commercial hospitality premises in the UK
• Solid wood construction avoids the flex and instability that can develop in cheaper alternatives over time
• The neutral weathered oak finish works across a broad range of interior schemes without the need to redecorate around it
• Supplied in a pack of six, which simplifies ordering for operators fitting out multiple tables at once

There are no electrical, gas or water installation considerations for seating. That said, it is worth confirming floor surface and table height compatibility before ordering, particularly if you are mixing with existing furniture. For very high-turnover environments — canteens or large function spaces with heavy daily use — a heavier-duty frame specification may be worth considering.

The Bath chair is well suited to independent restaurants, gastro pubs, café dining rooms and hotel restaurants where a consistent, presentable appearance matters alongside practical durability. It is a mid-range commercial chair rather than a lightweight event chair or a premium contract piece, so matching it to the right venue type matters.

If you are unsure whether this chair suits your layout, volume of covers or existing interior scheme, we are happy to talk it through before you commit to a quantity.

The Bath dining chair is a solid wood side chair with a padded seat and backrest upholstered in a Bison Cedar vinyl. It is a straightforward, practical choice for commercial dining spaces that need reliable, presentable seating without unnecessary complication.

In a busy venue, chairs take considerable punishment — constant stacking, dragging, and daily cleaning cycles. The Bath chair is built from solid sustainably sourced wood, which holds up better under repeated commercial use than engineered alternatives, and the weathered oak finish tends to age more gracefully in high-traffic settings where minor surface marks are inevitable. The vinyl upholstery wipes down quickly between covers, which matters when turnaround time is tight.

From an operational standpoint, the key practical points are:

• CRIB 5 fire-rated upholstery, meeting the standard required for most licensed commercial premises
• Wipe-clean vinyl surface supports fast, hygienic turnaround between sittings
• Classic silhouette sits comfortably alongside a wide range of interior schemes
• Supplied as a pack of six, simplifying procurement and ensuring finish consistency across a set
• Solid wood construction provides stability on uneven or older flooring common in pub and restaurant settings

The weathered oak and Bison Cedar combination suits relaxed, warm interior schemes — pub dining rooms, informal restaurants, café dining areas, and hotel breakfast settings. It would sit less naturally in a highly contemporary or minimalist environment where a cleaner finish might be more appropriate. If your seating requirement runs to larger quantities or you need a closer match to a specific interior palette, it is worth discussing options before committing to a single specification.

If you have questions about quantity, mix-and-match finishes, or suitability for a specific venue type, the team is happy to talk it through.

The Bath dining chair is a solid wood commercial dining chair finished in a weathered oak stain, with a padded seat and backrest upholstered in Bison Tan vinyl. It is supplied in a pack of six, making it a practical purchasing unit for operators fitting out or refreshing a dining space. The classic silhouette sits comfortably in a range of interior styles — from traditional pub dining rooms to contemporary café settings.

In commercial use, the chair's solid wood construction holds up well under the repeated daily use that hospitality environments demand. The weathered oak finish is forgiving in appearance, helping the chairs maintain a presentable look through a busy service period. The vinyl upholstery is straightforward to wipe down between covers, which matters in settings where turnover is high and cleaning time is limited.

From an operational standpoint, the key practical advantages are:

• Wipe-clean vinyl upholstery supports quick turnaround between covers
• CRIB 5 fire-rated upholstery meets commercial venue requirements without additional treatment
• Solid wood frame provides stable, reliable seating without wobble under daily use
• Weathered oak finish suits a wide range of interior colour schemes
• Six-pack supply format reduces per-unit cost and simplifies procurement

It is worth considering the weight and stackability of these chairs if storage space is limited, and the vinyl upholstery, while durable and easy to clean, will not suit every interior aesthetic. For venues with a higher seating capacity or a requirement for a different finish or fabric, there are alternative chair styles in the range that may be a closer fit.

This chair is well suited to restaurants, pubs, cafés, hotel dining rooms, and function spaces looking for a dependable, presentable dining seat that requires minimal maintenance. If you are fitting out a larger space or need guidance on quantities, cover configurations, or alternative styles, the team is happy to help you work through the options before you order.

The Bath dining chair is a solid wood side chair finished in weathered oak, with a padded seat and backrest upholstered in a Bison Espresso vinyl. It is supplied as a pack of six, making it a practical choice when furnishing or refreshing a dining area in one order.

In commercial use, the chair's solid wood frame holds up well under the sustained, daily demands of a busy dining room. The classic silhouette works across a range of interior styles — from traditional pub dining to contemporary café settings — without pulling the room in a particular direction. The padded seat and back provide a reasonable level of comfort for covers that turn over at a standard sitting pace, though venues expecting guests to linger for two hours or more may want to assess seat depth and cushioning in person before committing to a large quantity.

The vinyl upholstery is the practical choice for a commercial setting. It wipes clean quickly between covers, resists common spills, and meets CRIB 5 fire safety requirements, which is a standard specification expectation for public-facing hospitality venues in the UK. Key practical points worth noting:

• Wipe-clean vinyl upholstery — minimal maintenance between covers
• CRIB 5 compliant upholstery — suitable for licensed and public venues
• Solid wood frame — stable and durable under regular daily use
• Weathered oak finish — works with a broad range of interior palettes
• Pack of six — reduces per-unit cost and simplifies reordering

This chair is well suited to restaurants, café dining areas, pub dining rooms, and hotel breakfast or function spaces with moderate to busy cover volumes. It is a mid-range commercial chair — appropriate for most standard hospitality environments. Venues requiring contract-grade seating rated for very high turnover or outdoor covered use should consider whether a heavier specification is more appropriate for their needs.

If you are furnishing a new space or replacing a significant number of chairs, it is worth having a conversation with us first — we can help you assess quantities, mix-and-match with complementary table bases, and confirm lead times before you commit.

The Bath dining chair is a solid wood chair with a classic upright silhouette, finished in soft oak and upholstered in a Bison Smoke vinyl pad across both the seat and backrest. It is supplied as a pack of six, making it a practical option when furnishing or refreshing a dining area in one order.

In commercial settings, seating takes considerably more wear than most operators anticipate. Chairs are pulled, dragged, stacked, and occupied for extended periods throughout the day. The Bath chair is built from solid wood construction, which gives it the structural rigidity needed to hold up under continuous daily use in busy restaurants, pub dining rooms, café environments, and hotel bistros. The soft oak finish suits a range of interior palettes without looking out of place in either contemporary or more traditional settings.

From an operational standpoint, the vinyl upholstery is the practical choice for front-of-house seating. It wipes clean quickly between covers, resists spillages, and — importantly for any licensed or public venue — conforms to CRIB 5 fire safety standards. That compliance is a requirement in most commercial hospitality settings, not an optional feature.

• Wipe-clean vinyl seat and back for fast turnaround between covers
• CRIB 5 compliant upholstery suitable for licensed and public venues
• Solid wood frame offers durability under continuous daily use
• Soft oak finish works across a range of interior styles
• Pack of six supports efficient restocking or initial fit-out

The Bath chair is well suited to small and mid-sized dining operations looking for dependable seating that is straightforward to maintain. For operators equipping larger dining rooms or venues with heavier footfall, it is worth considering whether a chair specified for higher-intensity commercial use would be more appropriate over the longer term.

If you are unsure whether this chair fits your venue or want to discuss quantities and lead times, the team is happy to talk it through.

The Bath dining chair is a solid wood stacking chair upholstered in a dark vinyl fabric, supplied in packs of six. It follows a straightforward, classic silhouette that sits comfortably in a range of hospitality settings without demanding attention — which is often exactly what operators need from their seating.

In busy front-of-house environments, seating takes a considerable amount of daily wear. The Bath chair is built from solid sustainably sourced timber, which gives it the structural integrity to withstand repeated use across multiple sittings each day. The soft oak finish is warm and neutral enough to work with most interior palettes, from traditional pub dining rooms to contemporary café spaces.

The seat and backrest are padded and upholstered in Bison Midnight vinyl — a deep, practical finish that wipes clean between covers without needing specialist products. The upholstery conforms to CRIB 5 fire safety standards, which is a requirement for commercial hospitality premises in the UK.

• Solid wood frame offers reliable structural durability under regular commercial use
• Wipe-clean vinyl upholstery simplifies turnaround between sittings
• CRIB 5 compliant upholstery meets UK commercial fire safety requirements
• Neutral soft oak finish suits a wide range of venue styles and colour schemes
• Supplied as a pack of six, keeping per-unit cost practical for larger fit-outs

This chair suits restaurants, café dining areas, hotel dining rooms, and pub dining spaces where a clean, unfussy aesthetic is preferred. Operators furnishing larger or higher-traffic venues may wish to consider heavier-duty alternatives with reinforced frames or more robust commercial-grade upholstery options.

If you are fitting out a full dining room and want to talk through quantities, mix-and-match options, or suitability for a specific setting, our team is happy to help before you place an order.

The Bath dining chair is a solid wood side chair upholstered in a Bison Cedar vinyl finish, supplied in a pack of six. The frame carries a soft oak finish and the seat and backrest are padded and upholstered in a wipe-clean vinyl that meets CRIB 5 fire safety requirements — a standard required for fixed and loose seating in most licensed and public-facing hospitality premises.

In practice, these chairs suit the kind of mid-to-high turnover dining environment where seating takes regular daily use. The classic upright silhouette works across a range of interior styles without competing with décor, and the soft oak tone sits comfortably alongside both light and darker furniture palettes. The vinyl upholstery is practical for front-of-house teams — it wipes down quickly between covers without needing specialist cleaning products.

A few points worth considering before ordering:

• CRIB 5 compliance makes these suitable for use in licensed premises and hotels where fire safety standards apply to soft furnishings
• Sold as a six-pack, so quantities are fixed at multiples of six
• Solid wood construction offers good stability but may not suit very high-volume venues where stacking or rapid reconfiguration is required
• The vinyl finish is durable for normal service conditions, though it is worth considering wear over time in extremely high-turnover environments

These chairs are well suited to restaurants, café dining rooms, pub dining areas, and hotel breakfast or dining spaces where a consistent, classic look is needed alongside practical maintenance. If you are furnishing a larger space or need guidance on quantities, mix of seating types, or fire compliance for your specific venue, the team is happy to talk it through with you.

The Bath dining chair is a solid wood stacking chair finished in soft oak, with a padded seat and backrest upholstered in Bison Tan vinyl. It is supplied as a pack of six, making it a practical choice when equipping or refreshing a dining area in one order.

In commercial use, the chair holds up well in environments where seating is turned over repeatedly throughout service. The timber frame is constructed for stability under daily use, and the classic silhouette suits a broad range of interior schemes from traditional pub dining rooms to contemporary café spaces. The soft oak finish sits comfortably alongside both natural and neutral palettes without imposing a particular style.

The vinyl upholstery is the detail that makes this chair genuinely practical for front-of-house use. It wipes clean quickly between covers, does not absorb spillages, and the upholstery carries CRIB 5 fire retardancy certification, which is required in most commercial hospitality premises. Key practical points worth noting:

• Wipe-clean vinyl upholstery — practical for high-turnover dining rooms
• CRIB 5 fire rated — meets commercial hospitality compliance requirements
• Solid wood frame — stable and durable under regular daily use
• Soft oak finish — works across a wide range of interior styles
• Supplied as a six-pack — simplifies restocking and matched sets

This chair is well suited to restaurants, cafés, pubs, hotel dining rooms, and similar hospitality settings where a clean, unfussy aesthetic is preferred and ease of maintenance matters. It is not intended for outdoor or exposed use. Operators furnishing a larger venue may want to consider whether a heavier-duty or stackable format better suits their footprint and storage needs.

If you are fitting out a new venue or replacing a set of chairs and would like to talk through the options, the team is happy to help you make the right choice before you commit.

The Bath dining chair is a straightforward, well-made seat for commercial dining spaces. It combines a classic wooden frame in a soft oak finish with a padded seat and backrest upholstered in Bison Espresso vinyl — a warm, neutral combination that sits comfortably within a wide range of interior styles, from relaxed pub dining rooms to café fit-outs and hotel restaurants.

In day-to-day service, this type of chair earns its place through reliability rather than novelty. The solid wood construction handles the repeated movement and loading of a busy covers operation without racking or loosening over time. The vinyl upholstery is straightforward to wipe down between sittings, which matters in any venue running continuous table turns. The upholstery carries CRIB 5 fire resistance certification, which is a standard requirement for seating used in licensed and public hospitality premises in the UK.

Practical points worth considering:

• Wipe-clean vinyl seat and back — suitable for busy table-turn environments
• CRIB 5 fire-rated upholstery — meets UK commercial hospitality requirements
• Solid wood frame — resists racking under repeated daily use
• Soft oak finish — works across a range of traditional and contemporary interiors
• Supplied as a pack of six — useful for consistent batch ordering

These chairs are well suited to small and medium-sized dining venues looking for dependable, presentable seating without overcomplicating the specification. They are a reasonable choice for new openings or refits where consistency across a room matters. For larger venues or higher-footfall environments with more intensive daily use, it is worth considering whether a heavier-duty commercial frame would offer better long-term durability.

If you are fitting out a room and want to talk through quantities, layout, or whether this style suits your space, we are happy to help before you place an order.

The Bath dining chair is a solid wood side chair with a padded seat and backrest upholstered in Bison Smoke vinyl. The frame carries a dark walnut finish. It is supplied in a pack of six, making it a straightforward choice when furnishing or refreshing a dining space to a consistent standard.

In commercial use, the chair performs reliably across the kind of daily turnover typical of a busy restaurant, pub dining room or hotel breakfast area. The solid wood construction provides the stability and resistance to racking that chairs in high-turnover environments need, and the vinyl upholstery can be wiped down quickly between covers without absorbing odours or moisture. The upholstery meets CRIB 5 fire safety requirements, which is a standard condition of use in most licensed and hospitality premises.

From an operational standpoint, the main practical points are:

• Wipe-clean vinyl upholstery keeps turnaround between covers straightforward
• CRIB 5 compliance meets fire safety requirements for licensed premises
• Classic silhouette sits comfortably alongside a wide range of interior schemes
• Sold as a six-pack, reducing the complexity of ordering to a consistent specification
• Solid wood frame offers durability suited to daily commercial use

It is worth considering the floor surface and table height when specifying these chairs, particularly if the room has a mix of fixed and loose furniture. The dark walnut finish works well in warmer, traditional schemes but may need careful consideration against cooler or more contemporary palettes.

The Bath chair suits cafés, independent restaurants, pub dining rooms and hotel dining areas operating at a steady but not extreme pace. For very high-volume venues turning covers rapidly throughout the day, it is worth discussing whether a heavier-specification frame would better suit the intensity of use.

If you would like to talk through quantities, layouts or how these chairs sit alongside other furniture you are specifying, the team is happy to help before you place an order.

The Bath dining chair is a solid wood stacking chair finished in dark walnut, with a padded seat and backrest upholstered in Bison Midnight vinyl. It is a straightforward, well-proportioned chair designed to work across a range of commercial dining environments without demanding attention.

In commercial use, chairs take considerably more punishment than domestic furniture — repeated heavy use, scraping across hard floors, cleaning chemicals, and the general wear of a busy service. The Bath chair is built from sustainably sourced solid wood, which holds up better over time than engineered alternatives in high-turnover settings. The vinyl upholstery is wipe-clean and practical for table turns, and conforms to CRIB 5 fire safety standards, which is a requirement for most licensed and hospitality venues in the UK.

From an operational standpoint, this chair offers a number of practical advantages for front-of-house teams:

• Wipe-clean vinyl upholstery supports fast turnaround between covers
• CRIB 5 compliant upholstery meets standard fire safety requirements for commercial premises
• Classic silhouette sits comfortably across traditional and contemporary interiors
• Solid wood construction resists the racking and loosening common in heavily used seating
• Supplied in a pack of six, simplifying procurement for new openings or refits

There are no complex installation requirements — these are freestanding chairs. It is worth considering floor type, as dark walnut finishes can show scuffs if chairs are dragged repeatedly on hard floors without floor protectors fitted. For high-volume venues with very frequent table turns, a chair with a more hardwearing lacquer finish or metal frame may be worth considering alongside this option.

The Bath chair is well suited to restaurants, pub dining rooms, hotel breakfast areas, and café settings where a warm, classic aesthetic is preferred. It works best in environments where table layouts are relatively stable rather than regularly reconfigured. For venues needing a lighter chair or a design with arms, other options in the range may be more appropriate.

If you are furnishing a new space or replacing existing seating across a site, it is worth talking through quantities, layout, and mix of styles before ordering — we are happy to help you work through the options.

The Bath dining chair is a solid wood side chair with a classic upright silhouette, available here in a dark walnut finish with Bison Cedar vinyl upholstered seat and backrest. It is sold as a pack of six, which suits operators furnishing a new dining space or replacing seating in sections rather than one chair at a time.

In practice, this type of chair holds up well in everyday front-of-house use. The solid wood frame provides the structural rigidity needed in environments where chairs are moved frequently, stacked occasionally, and subjected to the general wear of busy service. The dark walnut finish suits a broad range of interiors — from traditional pub dining rooms to contemporary café settings — without looking out of place in either.

The vinyl upholstery is practical for commercial use. It wipes clean quickly between covers, and the Bison Cedar colourway is a neutral warm tone that disguises everyday marks reasonably well. The upholstery meets CRIB 5 fire resistance requirements, which is a standard compliance requirement for most licensed premises and hospitality venues in the UK.

• Solid wood frame suited to frequent daily use in commercial dining
• Wipe-clean vinyl upholstery keeps turnaround between covers straightforward
• CRIB 5 fire-rated upholstery meets UK hospitality compliance requirements
• Dark walnut finish works across a range of traditional and contemporary interiors
• Pack-of-six format simplifies procurement for new or refurbished dining areas

This chair is well suited to restaurants, pub dining rooms, hotel breakfast areas, and café settings with moderate to high footfall. It is a practical mid-range option rather than a heavy-contract specification chair — operators fitting out very high-turnover venues or those expecting exceptionally heavy use may want to consider a heavier-duty commercial specification.

If you are fitting out a full dining room and want to talk through quantities, layout, or whether this chair suits your particular setting, the team is happy to help.

The Bath dining chair is a solid wood side chair finished in dark walnut, with a padded seat and backrest upholstered in Bison Tan vinyl. It is supplied as a pack of six, making it a practical choice when furnishing a dining room, function space or bar area in one order.

In a busy commercial setting, seating takes considerably more daily wear than most operators anticipate. The Bath chair is built from solid sustainably sourced timber, which gives it the structural integrity needed for continuous use across multiple sittings per day. The vinyl upholstery is straightforward to wipe down between covers, which matters in fast-turnover environments where table reset time is short.

Key practical points worth noting:

• Vinyl upholstery conforms to CRIB 5 fire safety standards, as required in commercial hospitality premises
• Wipe-clean surface supports quick turnaround between sittings
• Classic silhouette works across a range of interior styles — traditional, contemporary and transitional
• Solid wood frame offers stability on uneven or older floor surfaces common in pub and restaurant environments
• Pack-of-six format reduces per-unit cost and simplifies freight for initial fit-outs or top-up orders

The dark walnut finish and Bison Tan upholstery combination suits warm, earthy interior schemes well. It is less suited to very minimal or industrial aesthetics where lighter or metal-framed seating tends to read better. As with any upholstered chair in a high-traffic venue, the vinyl will eventually show wear at the seat edges — replacement or reupholstery should be factored into long-term venue maintenance planning.

This chair is well suited to restaurants, hotel dining rooms, pub dining areas and café seating where a dependable, presentable chair at a sensible price point is the priority. For venues requiring contract-grade seating specified to a higher durability standard, or for large-scale fit-outs with specific lead time requirements, it is worth having a conversation with the team before placing an order.

The Bath dining chair is a solid wood chair with a classic upright silhouette, finished in dark walnut and fitted with a padded seat and backrest upholstered in Bison Espresso vinyl. It is supplied as a pack of six, making it a practical choice when furnishing or refreshing a dining area in one purchase.

In a busy commercial setting, chairs take considerable punishment — dragged across floors, stacked at the end of service, and occupied throughout long covers. The Bath chair is built from solid wood to withstand that kind of daily use without flexing or loosening at the joints. The dark walnut finish works well across a range of interior styles, from traditional pub dining rooms to contemporary café spaces.

The vinyl upholstery is worth noting for operational reasons. In a food service environment, fabric seating quickly becomes difficult to keep clean, particularly through multiple covers. The Bison Espresso vinyl wipes down quickly between guests and resists the kind of staining that shortens the usable life of fabric alternatives. The upholstery also conforms to CRIB 5 fire safety standards, which is a requirement for commercial hospitality premises in the UK.

• Wipe-clean vinyl seat and back simplifies turnover cleaning between covers
• CRIB 5 compliant upholstery meets commercial fire safety requirements
• Solid wood construction handles the daily demands of busy service
• Classic silhouette suits a broad range of dining interior styles
• Pack of six provides a convenient quantity for initial fit-outs or top-ups

This chair suits small to mid-sized hospitality venues — restaurants, pubs, cafés, hotel dining rooms and private dining spaces. For operators furnishing larger spaces or requiring stacking chairs for flexible room use, it is worth considering whether a stackable alternative better fits the operational need. If you are unsure which seating option suits your layout and usage, we are happy to talk it through.

The Copenhagen dining chair is a straightforward, well-proportioned side chair drawing on Scandinavian design principles — clean lines, gently curved edges, and a silhouette that sits comfortably in a range of dining environments without demanding attention. It is supplied here as a pack of six, which suits operators furnishing a section or completing a room in one order.

Constructed from solid wood with a weathered oak finish, the chair is built to handle the repetitive daily use that commercial dining puts on furniture. The Bison Smoke vinyl seat pad is practical rather than decorative — it wipes down quickly between covers and the upholstery meets CRIB 5 fire safety standards, which is a requirement for most commercial hospitality settings in the UK.

For front-of-house teams, the practical advantages come down to a few things worth noting:

• CRIB 5 compliant upholstery suitable for commercial hospitality use
• Vinyl seat pad wipes clean quickly between sittings
• Solid wood construction provides stability under daily commercial use
• Weathered oak finish works across traditional and contemporary interiors
• Six-pack supply makes it straightforward to furnish a section consistently

The chair suits restaurants, café dining rooms, hotel breakfast areas, and similar seated dining spaces. It is a mid-weight option in terms of robustness — well suited to moderate-turnover venues. Sites with very high cover counts or rougher handling environments may want to consider a more heavily built alternative before committing to a larger order.

If you are fitting out a full dining room and want to talk through quantities, finishes, or how this chair works alongside other furniture pieces, the team is happy to help you think it through before you order.

The Copenhagen dining chair is a solid wood side chair with a gently curved back, clean lines, and a upholstered seat pad in Bison Tan vinyl. The weathered oak finish gives the frame a warm, understated appearance that sits comfortably in a range of hospitality settings, from casual dining rooms to café and bar areas.

In day-to-day commercial use, these chairs hold up well under the regular movement and heavy use that comes with a busy dining room. The solid wood construction provides a stable, reassuring feel for guests, and the vinyl seat pad wipes down quickly between covers — a practical consideration when turnaround time matters during a busy service.

A few points worth noting for venue operators:

• Upholstery conforms to CRIB 5 fire safety standards, as required for commercial hospitality environments
• Vinyl seat pad is straightforward to clean and resistant to everyday spills
• Supplied as a pack of six, which helps maintain a consistent look across a seating area
• Sustainably sourced solid wood frame offers durability without excessive weight
• The Scandinavian-influenced silhouette works across a variety of interior styles

As with any dining chair intended for commercial use, it is worth considering the volume of covers you turn and whether the chair specification aligns with your service intensity. For venues with very high footfall or outdoor-adjacent areas, it is worth discussing whether this chair or a more robust alternative is the better long-term choice.

If you are furnishing a new space or refreshing an existing dining room and would like a second opinion on suitability or quantities, the team is happy to talk it through.

The Copenhagen dining chair is a straightforward, well-constructed side chair suited to restaurant, café, and hospitality seating areas. The weathered oak finish gives the frame a considered, understated appearance, while the Bison Midnight vinyl seat pad keeps the overall look clean and neutral — practical choices for venues that want a consistent aesthetic without a strong stylistic commitment.

Built from solid wood with gently curved edges and a stable four-leg base, the Copenhagen holds up well under the repeated use typical of busy dining rooms. The vinyl upholstery wipes down easily between covers, which matters in settings where turnaround speed and hygiene both count. The seat pad conforms to CRIB 5 fire safety standards, which is a baseline requirement for most licensed and commercial hospitality premises in the UK.

Supplied as a pack of six, the chairs allow operators to furnish a section or room consistently without sourcing individual units. Key practical points worth noting:

• CRIB 5 compliant upholstery — meets standard commercial fire safety requirements
• Vinyl seat pad wipes clean quickly between sittings
• Solid wood frame provides stable, durable everyday seating
• Weathered oak finish suits a range of interior schemes
• Pack of six supports efficient, consistent venue fit-outs

These chairs are well suited to cafés, casual dining restaurants, hotel breakfast rooms, and similar venues with moderate seating turnover. They are not designed for outdoor use or environments with heavy spillage exposure beyond routine wiping. If your operation involves particularly high seating volumes or requires stacking for rapid reconfiguration, it is worth discussing alternatives before ordering.

If you have questions about quantities, specification, or how these chairs fit into a wider seating scheme, the team is happy to help you work through the options.

The Copenhagen dining chair is a solid wood chair with a Scandinavian-influenced silhouette — gently curved edges, clean lines, and a weathered oak finish that works well in a range of venue settings, from casual dining rooms to more considered hospitality spaces. The seat pad is upholstered in Bison Espresso vinyl, which offers a degree of comfort for seated guests while remaining straightforward to wipe clean between covers.

For commercial use, the vinyl upholstery conforms to CRIB 5 fire safety standards, which is a practical requirement for most licensed hospitality venues in the UK. The solid wood construction provides the stability and weight that a busy dining chair needs — lightweight stacking chairs have their place, but a chair like this holds its position and communicates a level of quality that suits a more considered front-of-house environment.

Supplied as a pack of six, the format makes it practical to furnish a section or small dining room in a single order and maintain a consistent look throughout the space. Key practical points worth noting:

• CRIB 5 compliant upholstery suitable for licensed commercial premises
• Vinyl seat pad wipes clean quickly between guests
• Solid wood frame offers stability under regular daily use
• Pack of six supports consistent venue presentation
• Weathered oak finish suits both contemporary and rustic interior schemes

This chair is best suited to restaurants, cafés, boutique hotels, and similar hospitality venues where aesthetics matter alongside durability. It is not designed for high-density canteen environments where stacking or linking chairs would be more practical. If your venue has particularly high footfall or requires chairs that stack for flexible room layouts, it is worth discussing whether a different format would serve you better.

If you are furnishing a larger space or want to mix seating types, feel free to get in touch — it helps to talk through the full picture before placing an order.

The Copenhagen dining chair is a straightforward, well-proportioned side chair with a Scandinavian-influenced silhouette. It combines a solid wood frame in a dark walnut finish with a upholstered seat pad in Bison Smoke vinyl. It is sold as a pack of six, which makes it a practical choice when furnishing a dining area that needs a consistent look across multiple covers.

In day-to-day commercial use, the solid wood construction holds up well under the repeated use typical of a busy restaurant, café, or hospitality venue. The frame is stable underfoot and has the kind of weight that feels substantial without being awkward to move when resetting covers between services. The vinyl seat pad wipes down quickly between guests, which matters during a busy lunch or evening service when turnaround time is tight.

• CRIB 5 fire safety compliant upholstery — required for most UK commercial premises
• Vinyl seat pad cleans down easily with standard surface wipe
• Sold in packs of six for consistent presentation across a dining area
• Solid wood frame provides reliable day-to-day durability
• Dark walnut finish suits a range of interior schemes from traditional to contemporary

There are no significant installation requirements — these chairs are ready to use out of the box. It is worth confirming the seat height works comfortably with your existing table stock before ordering, and checking that the dark walnut tone sits well alongside your current furniture and décor palette.

These chairs are well suited to restaurants, cafés, hotels, and similar hospitality venues looking for a reliable, presentable dining chair without an overly decorative style. If you are furnishing a higher-footfall venue where chairs are subject to very heavy use, it is worth considering whether a more heavy-duty commercial frame would be a better long-term investment.

If you are unsure how many packs you need or whether these chairs will work alongside your existing furniture, feel free to get in touch with the team — it is a straightforward conversation that can save a return.

The Copenhagen dining chair is a solid-wood side chair with a Scandinavian-influenced profile — curved edges, clean lines, and a restrained silhouette that sits comfortably in a range of dining environments. The seat pad is upholstered in Bison Midnight vinyl, a dark, neutral finish that works well in contemporary restaurant, café, and bar settings. Supplied as a pack of six, the range is aimed at operators who need to furnish or refresh a seating area consistently without mixing and matching individual pieces.

In a commercial dining environment, durability and ease of maintenance matter as much as appearance. The vinyl seat pad wipes clean quickly between covers, which is a practical advantage during busy service periods. The upholstery meets CRIB 5 fire resistance requirements, which is a standard expectation for seating used in licensed and public venues in the UK. The timber construction is described as sustainably sourced, which may be relevant if environmental credentials form part of your procurement criteria.

• CRIB 5-compliant vinyl upholstery for commercial venue suitability
• Wipe-clean seat pad practical for back-to-back covers
• Solid wood frame with a stable, consistent build
• Neutral dark finish suits a range of interior schemes
• Pack-of-six supply supports consistent, cohesive seating layouts

These chairs are best suited to low-to-medium-turnover dining spaces — restaurants, cafés, private dining rooms, and similar hospitality settings where guests are seated for a full meal. They are not designed for high-stacking storage or heavy-rotation banqueting use. If your venue operates very high covers or requires chairs that stack for frequent room resets, it is worth discussing whether a more operationally robust option would serve you better.

If you are fitting out a new dining space or refreshing existing seating and would like to talk through quantities, layout, or suitability for your venue, we are happy to help before you commit to an order.

The Copenhagen dining chair is a straightforward, well-proportioned timber chair designed for commercial dining environments. It draws on mid-century Scandinavian styling — gently curved edges, clean lines, a refined silhouette — without being fussy or fragile. The frame is constructed from solid wood with a dark walnut finish, and the seat pad is upholstered in a bison tan vinyl.

In a busy hospitality setting, durability and ease of maintenance matter more than aesthetics alone. The vinyl seat pad wipes clean quickly between covers, which is a practical advantage during high-turnover service. The upholstery conforms to CRIB 5 fire safety standards, making these chairs suitable for use in commercial premises where fire rating compliance is a requirement.

Supplied as a pack of six, the Copenhagen is a sensible choice for venues looking to furnish a section or room consistently without ordering individual units. Key practical points worth noting:

• CRIB 5 compliant upholstery suitable for commercial use
• Wipe-clean vinyl seat pad for quick turnaround between covers
• Solid wood frame offering good day-to-day stability
• Consistent finish across the pack for a cohesive dining area look
• Scandinavian-influenced design that works across a range of interior styles

These chairs are well suited to restaurants, cafés, bistros, and pub dining areas with a contemporary or natural aesthetic. They are not heavy-duty stacking chairs, so venues with very high churn, outdoor use, or rough handling requirements may want to consider a more robust option.

If you are furnishing a larger space and want to discuss quantities, mix-and-match options, or suitability for your specific setting, the team is happy to help you work through the detail before you commit.

The Copenhagen dining chair is a Scandinavian-influenced side chair with a solid wood frame in a dark walnut finish. Gently curved edges and clean lines give it a restrained, mid-century character that sits comfortably in restaurant dining rooms, café spaces, and hotel dining areas without dominating the room. The seat pad is upholstered in Bison Espresso vinyl, a practical choice for hospitality environments where spills are routine and turnover between seatings is tight.

In day-to-day service, the chair holds up well under the repeated use that commercial dining demands. The solid wood construction gives it stability and a reassuring feel underfoot, and the vinyl seat wipes clean quickly between covers — a small but meaningful advantage during a busy lunch or dinner service.

A few practical points worth noting:

• Upholstery meets CRIB 5 fire safety standards, a requirement for most licensed commercial premises in the UK
• Vinyl seat pad resists moisture and is straightforward to sanitise between seatings
• Sold as a pack of six, which simplifies procurement and ensures colour consistency across a seating area
• The dark walnut finish works across a range of interior palettes, from industrial to contemporary
• Solid wood frame avoids the flex and instability associated with some lighter-duty hospitality chairs

This chair is a sensible choice for operators furnishing a dining room where guest comfort, easy maintenance, and a clean aesthetic all matter. It is well suited to restaurants, hotel dining rooms, café bistros, and similar seated hospitality settings. For venues with very high footfall or outdoor-adjacent spaces, it is worth considering whether a more robust or weatherproof specification would serve better long term.

If you are furnishing a larger space or want to talk through how these fit alongside other furniture in your scheme, the team is happy to help you think it through before you place an order.

The Bolero Bespoke Brenda is a side chair from Bolero's made-to-order contract furniture range, finished here in a blue faux leather seat with an oak-stained beechwood frame. It follows a straightforward design — a solid wood frame with a curved back rail and an upholstered seat pad — that suits restaurant, café, hotel, and similar hospitality dining environments where a clean, contemporary aesthetic is needed without straying too far from a classic form.

The beechwood frame is constructed to contract-grade standards, meaning it is intended to hold up under the repeated daily use typical of a busy dining room rather than occasional domestic use. The faux leather seat covering is practical in a food service setting — it wipes down easily between covers and does not absorb spills in the way that fabric upholstery can. The upholstery also carries a CRIB5 fire-retardant rating, which is a requirement for many licensed and public-access hospitality premises in the UK.

• Solid beechwood frame built to contract-grade structural standards
• Faux leather seat covering — easy to wipe clean between sittings
• CRIB5 fire-retardant upholstery, meeting hospitality compliance requirements
• Oak finish frame with blue seat — consistent with a modern-classic dining aesthetic
• Suitable for restaurants, cafés, hotels, and other commercial dining spaces

One important practical consideration: this chair is built to order and is non-returnable once the order has been placed. It is worth confirming the finish combination, quantities, and suitability for your space before ordering. If you are fitting out a larger dining room or need to match existing furniture, it is sensible to check lead times as well.

This chair is well suited to venues wanting a consistent, smartly finished dining chair that meets contract standards without a high per-unit cost. If your environment involves unusually high turnover or heavy daily use, it is worth discussing whether a heavier-duty option from the wider range would be more appropriate.

If you would like to talk through finish options, quantities, or lead times before placing an order, the team is happy to help.

The Bolero Bespoke Vicky is a side chair from Bolero's made-to-order contract furniture range, designed for restaurants, hotels, bars, and similar commercial hospitality settings. The olive upholstery paired with a wenge-finish beechwood frame gives it a warm, contemporary look that works well in both traditional dining rooms and more modern interiors. Because it is built to order, the combination of finish and fabric is fixed at point of manufacture, which is worth bearing in mind before placing an order.

The beechwood frame is suited to the demands of regular commercial use — the kind of daily stacking, moving, and heavy sitting that contract furniture has to absorb over time. The slatted back is a practical choice for dining chairs, offering support without trapping heat during longer covers. The faux leather seat pad is straightforward to wipe down between services, which matters in any food and beverage environment where spills are routine.

• Hardwood beechwood frame with wenge stain finish for commercial durability
• Faux leather seat pad that wipes clean easily between covers
• CRIB5 fire-retardant upholstery meeting contract-grade standards
• Slatted back design providing support during longer dining covers
• Built-to-order from the Bolero Bespoke range in a fixed olive/wenge combination

Because this chair is built to order, lead times will be longer than for standard stock items and the order cannot be cancelled or returned once placed. It is worth confirming quantities carefully before ordering, particularly if you are fitting out a full dining room where chair counts and table configurations need to align. The chair suits venues looking for a mid-range contract option with a defined colour story, though operators furnishing a high-turnover environment with very large seating capacities may want to consider heavier-duty or stackable options from the wider contract furniture range.

If you are unsure whether this chair is the right specification for your venue — or if you need help planning quantities across a larger fit-out — the team is happy to talk it through before you commit.

The Bolero Bespoke Vicky is a side chair built for contract use in restaurants, hotels, and hospitality venues where appearance and durability both matter. It combines a solid hardwood frame with a slatted back and an upholstered seat pad in faux leather, finished here in a cream and charcoal colourway. As part of Bolero's Bespoke range, it is available in a range of fabric and stain combinations, making it a practical option for operators who need seating that ties into a specific interior scheme.

The hardwood frame is selected for structural integrity under the demands of daily commercial use — repeated chair movement, varied occupant weight, and the general wear of a busy dining room. The slatted back provides light visual interest without overcomplicating the design, and the overall proportions are suited to standard dining table heights. The faux leather seat pad is straightforward to wipe down between covers, which matters in a service environment where turnaround time is a consideration.

Key practical points for operators considering this chair:

• CRIB5 fire-retardant upholstery — a requirement for most contract and licensed hospitality settings
• Faux leather seat pad wipes clean easily, reducing between-service maintenance time
• Hardwood frame construction suited to the repetitive use of a commercial dining room
• Available across multiple fabric and stain finishes for venue-matched specification
• Built to order — lead time should be factored into fit-out or refurbishment planning

Because this chair is built to order, it is non-returnable once the order is placed. That makes it important to confirm the finish, quantity, and suitability before committing. For venues seating larger volumes or requiring heavy-duty stacking capability, other configurations in the range may be worth considering alongside this model.

If you are specifying seating for a new opening or refurbishment and want to talk through finish options or quantities, the team is happy to assist before you place an order.

The Bolero Bespoke Vicky is a side chair designed specifically for commercial hospitality environments. Built on a solid beechwood frame with a slatted back and an upholstered faux leather seat pad, it sits within Bolero's made-to-order Bespoke range — a collection that allows operators to specify fabric and stain finishes to suit their venue rather than compromising on an off-the-shelf colour.

In a busy restaurant or hotel dining room, chairs take considerable punishment — dragged across floors, sat on repeatedly throughout a service, and wiped down constantly. The Vicky's hardwood frame is selected for structural durability under that kind of contract use, and the faux leather upholstery is practical from a hygiene standpoint: spillages wipe clean quickly, which matters during a busy lunch or dinner service. The seat pad meets CRIB5 fire-retardant standards, which is a requirement for most commercial hospitality settings in the UK.

Key practical points worth noting:

• CRIB5 fire-retardant upholstery — meets UK commercial contract requirements
• Slatted hardwood back provides visual interest without excess bulk
• Faux leather seat pad cleans quickly between covers
• Available in a range of fabric and stain finishes through the Bespoke programme
• Contract-grade construction rated for high-frequency daily use

Because this chair is built to order, lead times will be longer than a stocked product. It is also non-returnable once an order is placed, so it is worth confirming your finish selection carefully before committing. If you are furnishing a large dining room or a phased rollout, planning your order volumes in advance will help avoid delays between phases.

The Vicky suits restaurants, hotels, café-bars, and function rooms where a clean wood-and-upholstery aesthetic is wanted without the maintenance demands of genuine leather. Operators with a more casual or heavy-industrial brief may find a fully timber or metal-frame option more appropriate.

If you are selecting chairs across a full dining room fit-out or are unsure which finish will work best with your existing scheme, we are happy to talk it through before you place an order.

The Bolero Bespoke Bia A is a side chair built specifically for contract use in hospitality and foodservice environments. It combines a solid beechwood frame with faux leather seat and back pads, finished here in a blue and wenge colour combination. As part of Bolero's Bespoke range, it is built to order, which means it is not held as standard stock — lead times should be confirmed at the point of enquiry.

In a front-of-house setting, the chair needs to hold up to repeated daily use across sittings, regular stacking or repositioning, and the occasional knock during a busy service. The hardwood frame is structurally suited to that kind of continuous demand, and the faux leather upholstery is practical to wipe down between covers — an important consideration in any food environment.

Key practical points for operators and specifiers:

• CRIB5 fire-retardant upholstery meets contract-grade compliance requirements
• Faux leather surface is straightforward to clean and resists moisture
• Hardwood frame construction provides structural reliability under daily use
• Blue and wenge finish suits both classic and contemporary dining interiors
• Built to order — suitable where a consistent look across a room scheme is needed

Because this chair is made to order, it is non-returnable and non-refundable once the order has been placed. That makes it important to confirm the finish, quantity, and suitability before committing. If you are fitting out a larger dining space or need to mix this chair with other pieces from the Bespoke range, it is worth discussing lead times and quantities with us first. Other frame and upholstery combinations are available within the range if the blue and wenge pairing does not suit your scheme.

If you are specifying seating for a new venue or refurbishment and want to talk through the options, we are happy to help.

The Bolero Bespoke Bia A is a side chair built specifically for contract hospitality use. It combines a solid beechwood frame with faux leather seat and back pads in a blue and beech colour combination, giving it a clean, classic appearance that works across a range of dining environments — from casual restaurants to hotel dining rooms and function spaces.

In busy front-of-house settings, durability and ease of maintenance matter as much as appearance. The hardwood frame is structurally rated for contract use, meaning it is built to handle repeated daily use without the joint fatigue that affects lighter domestic-grade furniture. The faux leather upholstery wipes down cleanly between covers, which is a practical consideration in any volume dining operation.

Key practical points worth noting:

• CRIB5 fire-retardant upholstery meets contract-grade compliance requirements
• Faux leather surface is straightforward to clean between sittings
• Solid beechwood frame constructed for repeated daily use
• Colour block finish suits both contemporary and traditional interior schemes
• Supplied as a side chair, suitable for use alongside fixed or freestanding tables

One important consideration: this chair is built to order and is non-returnable once the order has been placed. Lead times should be factored into any refurbishment or new venue opening project, and it is worth confirming quantities carefully before ordering.

This chair is well suited to restaurants, cafés, hotels, and function venues looking for a contract-rated seat with a straightforward, presentable aesthetic. It is a practical mid-range option for operators who need reliable front-of-house seating without commissioning a full bespoke furniture programme.

If you are furnishing a larger space or need to mix chair styles across different areas, it is worth having a conversation with us before placing a built-to-order quantity.

The Bolero Bespoke Bia A is a side chair built specifically for contract use in hospitality and foodservice environments. It combines a solid hardwood frame with faux leather seat and back pads, finished in a red and wenge colour combination. As part of Bolero's Bespoke range, it is made to order, meaning the finish you see is the finish that arrives — there is no off-the-shelf stock version of this chair.

In a busy restaurant or hotel dining room, chairs take considerable daily punishment — stacking, dragging, the weight of guests over long sittings, and repeated cleaning. The Bia A is constructed from beechwood, a hardwood commonly selected for contract furniture on account of its density and resistance to racking. The joinery is designed to hold up under the repetitive stress that comes with high-turnover covers, rather than the lighter demands of occasional domestic use.

The faux leather upholstery is practical for front-of-house settings where spills are routine. It wipes down cleanly without the absorbency issues associated with fabric, and it meets CRIB5 fire-retardancy requirements, which is a standard requirement for contract furniture in UK licensed premises and hotels.

• Solid beechwood frame constructed to contract-grade standards
• Faux leather seat and back pad — easy to wipe clean after service
• CRIB5 fire-retardant upholstery, suitable for licensed premises and hotels
• Red and wenge colour finish suited to contemporary or classic interiors
• Built to order — finish is consistent and not subject to batch variation

Because the chair is made to order, lead times will be longer than stocked items and the order cannot be cancelled or returned once placed. This is worth factoring into any refurbishment or opening project timeline. If you are furnishing a larger space or need to mix chair styles across a room, it is sensible to confirm quantities carefully before ordering.

The Bia A is well suited to restaurants, hotel dining rooms, wine bars, and similar hospitality settings where a upholstered side chair with a warm timber finish is appropriate. For venues needing a stacking option or a lighter-weight chair for tighter layouts, other models in the range may be worth considering.

If you are unsure whether this chair suits your space, cover count, or existing interior scheme, we are happy to talk it through before you commit to an order.