Kitchen Wall Cupboards & Shelves

Corner junctions at high level are one of the most consistently wasted areas in a commercial kitchen. Standard straight wall cupboards cannot meet at an angle without leaving awkward gaps, and in a working kitchen those gaps tend to collect grease and clutter rather than serve any useful purpose. The Quick Service QAWC753LH is an angled corner wall cupboard built specifically to address this. It sits cleanly in the corner junction and is designed to connect with 300mm-deep straight wall cupboards running either side, allowing a continuous, enclosed run of high-level storage across the whole wall.

In practice, this type of unit is used to store dry goods, disposables, small equipment, and operational supplies that need to remain accessible during service without cluttering the work surface below. The lockable door makes it particularly practical in kitchens where multiple staff are working and certain items — cleaning chemicals, allergen-specific ingredients, or higher-value smallwares — need controlled access. The barrel lock supplied with two suited keys is simple to manage across a shift without becoming a logistical burden.

The operational advantages of this unit are straightforward:

• Converts a typically unused corner into genuinely usable enclosed storage
• Connects with matching straight wall cupboards to form a continuous storage run
• Lockable door allows controlled access to restricted or sensitive items
• Adjustable mid-shelf accommodates varying stock heights without wasted vertical space
• Full steel back panel and rear upstand allow clean sealing against the wall surface

The unit is wall-mounted using the brackets supplied. Because the angled corner configuration creates a deeper storage area than a standard straight cupboard of equivalent face width, it can carry a meaningful load — wall fixings should reflect this. Solid masonry is preferable; stud work should be adequately backed. It is worth confirming wall construction before installation rather than after.

This cupboard is well suited to restaurants, café kitchens, pub kitchens, and similar catering operations where a run of high-level wall storage is being planned or extended. It works best as part of a coordinated storage run rather than as a standalone unit. If you are planning a full high-level storage layout and want to make sure the corner configuration works with your existing or planned straight cupboards, the team is happy to talk it through before you order.

This is a purpose-built wall-mounted shelf designed to hold a freestanding microwave oven in a commercial kitchen environment. Constructed from 430 grade stainless steel and mounted on welded cantilever box section wall brackets, it keeps the microwave off the worktop and positions it at a practical working height on the pass or in a servery area.

In busy kitchens where worktop space is at a premium, getting the microwave off the counter makes a meaningful difference to workflow. A dedicated shelf keeps the unit stable, positions the cable neatly behind the rear upstand, and frees up preparation or plating space below. The turned-down edges and rear upstand add rigidity to the shelf and help prevent the microwave from shifting during service.

• Keeps the microwave at a consistent, accessible height throughout service
• Rear upstand channels the power cable tidily behind the shelf
• Stainless steel construction wipes down cleanly and resists the moisture common in kitchen environments
• Pre-drilled brackets simplify installation against a wall stud or solid masonry surface
• Frees up worktop or counter space in tight service areas

Installation is straightforward, but the wall fixing points need to be sound — the brackets are pre-drilled, but fixings are not supplied and the wall construction will determine what fixings are appropriate. It is worth confirming that the wall can bear the combined weight of the shelf and a loaded microwave before fitting. Two depth options are available to suit different microwave footprints, so checking the depth of your unit before ordering is advisable.

This shelf suits smaller operations — cafés, pub kitchens, school canteens, care homes — where one or two microwaves are in regular use and wall space is available near the pass. For sites running multiple microwaves in a high-volume operation, a purpose-built shelving run may be a more practical solution.

If you are unsure which size suits your microwave or whether this fits your kitchen layout, the team is happy to talk it through with you.

Corner junctions at high level are among the most consistently wasted areas in a commercial kitchen. The Quick Service QAWC753H is a fully enclosed, wall-mounted stainless steel cupboard built specifically for angled corner positions, turning that otherwise redundant space into practical, enclosed storage. It is designed to sit alongside standard 300mm deep wall cupboards on either side, so operators can achieve a continuous run of high-level storage across a wall junction that would otherwise leave a gap.

The cupboard is constructed from 430-grade stainless steel throughout, which holds up reliably in the damp, steam-heavy conditions of a working kitchen. Hinged, side-hung doors keep stored items away from splatter and airborne grease during service, and the adjustable mid-shelf allows the internal space to be configured around whatever is being stored — dry goods, consumables, or small equipment. A rear upstand to the roof allows the unit to be properly sealed against the wall surface, which matters in kitchens where hygiene standards are closely monitored. A lockable version is also available where controlled access is needed.

The practical advantages for a kitchen team include:

• Closes the corner gap in a continuous high-level storage run
• Enclosed doors keep stored items hygienic and clear during service
• Adjustable mid-shelf accommodates varying stock heights
• Rear upstand allows a clean, sealed fit against the wall
• Available in a lockable version for restricted-access storage

Installation requires secure wall fixings suited to your wall construction. The unit is supplied with wall-mounting support brackets, and fixing hole dimensions are consistent across the Quick Service wall cupboard range, which simplifies alignment when fitting alongside adjoining units. As with any wall-mounted storage, the wall structure must be capable of bearing the loaded weight — this is worth confirming with your installer in advance, particularly on stud or dry-lined walls.

This cupboard suits kitchens of most sizes where an angled corner junction sits within the high-level storage run. It is especially useful in tighter kitchens where making use of every available metre matters. If you are planning a full run across multiple walls, it is worth mapping out the entire configuration before ordering individual units to ensure consistent depth and height alignment throughout the run.

If you are working through a wall storage layout and want to talk through how this unit fits in, our team are glad to help you get the configuration right before you order.

The Designline rodded pot rack is a wall-mounted, open-framed drainage shelf designed for storing and air-drying pots, pans, and cooking utensils in commercial kitchens. The open rod construction allows water to drain freely, making it particularly well suited to positioning above sink areas where wet equipment is stacked after washing.

In a busy kitchen environment, having a dedicated place to land freshly washed pots speeds up the washing cycle and keeps worktops and sink surrounds clear during service. The open design also means air circulates around stored items, which supports hygiene and reduces the risk of water pooling that can occur on solid shelving. The rack is available in a wide range of lengths and depths, so it can be sized to the available wall space and the volume of utensils a kitchen typically turns over.

A few practical points worth considering before ordering:

• Integral cantilever wall brackets are pre-drilled, but fixings are not supplied — the appropriate fixings will depend on the wall construction
• Longer lengths include additional support brackets, which is worth factoring in during installation planning
• The rack is wall-mounted only; there is no freestanding option in this range
• Wall construction and load-bearing capacity should be assessed before installation, particularly in older or partitioned kitchen builds

This rack is well suited to kitchens of most sizes — from smaller independent operations through to larger contract or hotel kitchens — where dedicated pot storage and drainage space above the sink is a practical priority. If your operation involves extremely high utensil throughput or particularly heavy stockpots, it is worth discussing load requirements before selecting a size.

If you are unsure which length and depth combination best fits your sink run or available wall space, the team is happy to help you work it out before you order.

The Designline stainless steel base cupboard is a purpose-built storage unit for commercial kitchen environments, designed to sit at standard counter height and integrate cleanly with back-counter runs, wall benches, and centre bench configurations. Construction is based on a welded box-section frame with a fixed base shelf, a full-height rear panel, and wrap-around side panels that enclose the frame for a clean, hygienic finish. An adjustable mid-shelf sits on strengthened support rails, allowing the internal storage space to be configured around whatever you need to store.

In practice, these cupboards work well as under-counter storage for dry goods, smallwares, and equipment that needs to be close to hand during service without cluttering the worktop above. The enclosed construction keeps contents clear of floor debris and makes cleaning around the unit straightforward. Cupboards up to 1,200mm in length are fitted with hinged doors; wider units are supplied with sliding doors, which is the more practical arrangement where access space in front of the unit is limited.

A few practical points worth understanding before ordering:

• Two leg height options are available — a shorter option to align with adjacent hot cupboard or plinth heights, and a taller option to line through with wall and centre benches
• Two worktop profiles are offered — a centre bench top with turned-down edges on both sides, or a wall bench top with a rear upstand
• Wall bench versions have legs inset to the rear to allow for service pipework running behind the unit
• Flanged adjustable feet allow the unit to be levelled and fixed securely to the floor on site

These cupboards are well suited to new kitchen builds and refurbishments where stainless steel fabrication is being used throughout. They are designed to integrate with Designline's wider bench and frame range, so if you are fitting out a full run or need to match existing Designline equipment, it is worth discussing your layout before ordering to ensure leg heights and worktop types align correctly across the installation.

If you are unsure which configuration suits your kitchen layout, our team are happy to talk through the options with you.

These stainless steel wall cupboards from Quick Service provide fully enclosed overhead storage with lockable hinged doors. Available in five widths, they are a practical choice for commercial kitchens where secure, hygienic storage above the work line is needed — whether for dry goods, smallwares, or items in regular service use.

The cupboards are fully enclosed with wrap-round side panels and a base shelf, meaning contents are protected from dust and splatter typical in busy kitchen environments. An adjustable internal mid shelf allows the internal layout to be configured around what is being stored, which is more useful in practice than a fixed arrangement. A small rear upstand on the roof allows the unit to seal neatly against a wall surface where items may be placed on top, keeping the installation tidy and reducing the risk of debris falling behind.

Practically, these cupboards suit a wide range of kitchen setups:

• Lockable doors allow restricted access to specific consumables or equipment
• Adjustable mid shelf accommodates varying item heights without modification
• Stainless steel construction is straightforward to wipe down and maintain hygienically
• Fully enclosed design keeps stored items free from airborne grease and dust
• Available across five widths to suit different wall runs and storage requirements

Installation is wall-mounted, so adequate wall structure to take the loaded weight is important — solid masonry or studwork with appropriate fixings is advisable. The 300mm depth keeps the units from projecting too far into the working space, which is worth considering in tighter kitchens. These units are not ventilated, so they are not suited to storing items that require airflow.

Well suited to cafés, pub kitchens, school catering facilities, and similar operations where reliable, hygienic overhead storage is needed without unnecessary complexity. For sites requiring significantly larger storage capacity or deeper units, other configurations within the range may be more appropriate.

If you are unsure which width or combination of units will work best for your wall space and storage needs, our team is happy to talk it through with you.

These Designline heavy duty wall shelves are a practical, no-frills storage solution for back-of-house environments. Constructed from 430 grade stainless steel with box section cantilever brackets, they provide a clean, wall-mounted shelf suitable for storing containers, utensils, smallwares, and lighter equipment above prep surfaces or along service runs. The solid shelf profile includes a turn-down on three faces and a rear upstand, which helps retain items and prevents spillage running down the wall.

In a working kitchen, wall-mounted shelving earns its place by freeing up bench and floor space without introducing anything that gets in the way of daily cleaning. The cantilever bracket design means there are no legs or cross-members to work around underneath, which matters when you are mopping out at the end of service. The heavy duty bracket system is the right choice where shelves will carry consistent load over time — general back-of-house storage rather than display-only use.

A few practical points worth considering before ordering:

• Available in seven lengths from 600 mm up to 2400 mm, and three depths — 300, 400, or 500 mm
• Additional support brackets are included with longer shelf lengths
• Brackets are pre-drilled for wall fixing; fixings themselves are not supplied
• Suitable for solid masonry or stud walls with appropriate fixings for the substrate
• The 430 grade finish is standard for dry storage areas — consider the environment before specifying in high-moisture zones

These shelves suit most commercial kitchens where straightforward, reliable wall storage is needed — from small café prep areas through to larger production kitchens. For sites needing deeper shelving, heavier load ratings, or shelving systems integrated with uprights and adjustable tiers, alternatives in the range may be worth exploring.

If you are fitting out a kitchen and want to talk through shelf placement, load requirements, or which depth suits your workflow, the team is happy to help you plan it out before you order.

The Designline medium duty wall shelf is a straightforward, workhorse piece of back-of-house storage designed for commercial kitchen environments. Constructed from grade 430 stainless steel throughout, the shelf runs on pre-drilled folded steel gusset brackets that fix directly to the wall, providing a clean and accessible surface for utensils, containers, and lighter equipment. The shelf itself features a turned-down edge on three faces and a rear upstand, which helps to retain items during busy service periods and simplifies cleaning.

In day-to-day kitchen use, this type of shelf earns its place by keeping countertops and prep surfaces clear. Whether positioned above a prep table, alongside a cooking line, or in a dry store, it provides reliable overhead storage that holds up to the humidity, grease, and general wear typical of a working kitchen. The gusset bracket design is a proven construction method — it offers a solid cantilever fixing without the bulk of box-section framing, which keeps the shelf profile neat and easy to clean around.

Practical considerations worth noting before ordering:

• Wall fixings are not supplied — ensure you have appropriate fixings for your wall substrate
• Available in lengths from 600 mm up to 2400 mm, all at a standard 300 mm depth
• Additional gusset brackets are included as shelf length increases, maintaining load integrity
• The 300 mm depth suits lighter storage; it is not intended for heavy equipment loads
• Grade 430 stainless steel is well suited to dry and semi-dry storage areas

This shelf is a practical choice for small to medium kitchens, café back bars, or any operation needing organised wall-mounted storage on a sensible budget. For kitchens with heavier storage demands or where a greater shelf depth is required, a heavier-duty option may be worth considering.

If you are planning a run of shelving across multiple bays or need advice on spacing and load suitability, the team are happy to talk it through before you place an order.

These Designline stainless steel cupboards are available in two configurations: a standard storage cupboard and a COSHH-compliant version for the safe containment of cleaning chemicals and hazardous substances. Both are built from a box-section frame with a welded base and mid shelf, and include two further adjustable-height removable shelves carried on strengthened support rails — giving operators flexibility to configure internal space around what they actually need to store.

The construction is fully enclosed, with a solid welded roof, full-height back panel, and wrap-round side panels. Side-hinged doors are of inner and outer panel construction, mounted on sturdy cabinet hinges and fitted with a chrome D-handle. This level of enclosure keeps contents protected from the general kitchen environment, which matters both for hygiene and for compliance when storing chemicals.

In practical terms, these cupboards suit a range of undercounter and countertop configurations. The leg height is set to align with common adjacent equipment kick plinth heights, which supports a cleaner, more considered kitchen layout rather than awkward height mismatches between units.

• Adjustable internal shelving to suit different storage needs
• Fully enclosed construction protects contents from kitchen environment
• COSHH version supports compliant chemical storage on-site
• Leg height designed to align with standard counter and adjacent unit heights
• Stainless steel throughout for durability and ease of cleaning

These cupboards are well suited to kitchens of most sizes, from smaller café and pub operations through to larger contract catering environments. For sites with particularly high storage demands or more complex COSHH requirements, it is worth discussing your layout before ordering to make sure the configuration is right.

If you are unsure whether the standard or COSHH version is appropriate for your site, or how these units will integrate with your existing equipment layout, our team is happy to talk it through with you.

These stainless steel wall cupboards from Designline are a practical overhead storage solution for commercial kitchens where worktop and floor space is at a premium. Available in five standard lengths — 600, 900, 1200, 1500, and 1800mm — they can be specified with either hinged or sliding doors to suit the working space around them. Fully enclosed construction with wrap-round side panels, a welded base shelf, and a full-height flush steel back panel gives a clean finish and keeps contents protected from ambient kitchen conditions.

In a working kitchen, the design holds up well under daily use. The adjustable internal mid shelf allows the internal layout to be configured around what is being stored, whether that is dry goods, smallwares, or service items. The rear upstand along the roof panel allows units to be sealed against a wall surface where items may also be stored on top. The concealed screw fixing through the back panel keeps the internal face tidy and snag-free, which matters in a busy kitchen where staff are reaching in and out throughout service.

• Five standard lengths to suit different wall runs and kitchen layouts
• Choice of hinged or sliding doors — sliding suits tighter spaces where door swing is a consideration
• Adjustable mid shelf allows internal configuration to match stored items
• Fully enclosed construction with flush back panel and concealed fixings
• Rear upstand enables clean sealing against the wall surface

These units are appropriate for most commercial kitchen environments — cafés, pub kitchens, school catering facilities, and professional prep kitchens — where hygienic, enclosed overhead storage is needed. For sites requiring a very large number of units or bespoke configurations beyond standard lengths, it is worth discussing your layout in advance to ensure the right combination is specified.

If you are unsure which length or door configuration suits your wall run, or need guidance on combining units into a longer run, the team is happy to talk it through with you before you order.

This is a wall-mounted single shelf from Parry, manufactured in stainless steel and available in a range of widths to suit different kitchen layouts. At 300mm deep, it provides a practical overhead storage surface for dry goods, smallwares, and lightweight equipment without projecting excessively into the working space below.

In a busy commercial kitchen, keeping preparation surfaces clear is one of the more straightforward ways to improve workflow during service. Reliable wall storage means frequently used items have a fixed home above the work surface rather than competing for bench space. Stainless steel is the standard material for this environment — it tolerates heat, humidity, and repeated cleaning without deteriorating, and unlike painted or timber alternatives, it does not harbour bacteria in surface imperfections. Parry have been manufacturing commercial catering equipment in the UK since 1943, and this shelf reflects the functional, no-frills build quality that professional kitchen specification tends to require.

• Pre-drilled brackets included, simplifying wall fixing on site
• Available in multiple widths to fit runs of varying length
• Stainless steel construction resists corrosion and wipes down easily
• Low-profile depth suits most standard kitchen wall layouts
• Compatible with typical commercial wall surfaces and fixing methods

Installation is straightforward, though it is worth confirming the wall construction is suitable for the intended load before fixing. Masonry, blockwork, and solid partitions are generally appropriate; stud walls or dry-lining may require additional noggins or anchor plates. Position the shelf at a practical working height, clear of overhead heat sources and extraction ductwork.

This shelf is well suited to smaller commercial kitchens, prep areas, serveries, and back-of-house spaces where additional wall storage is needed without a significant outlay. If greater depth, a higher load rating, or a multi-tier shelving system with uprights is required, there are heavier-duty options in the range worth considering.

If you are weighing up which width works best for your layout, or whether a single shelf is the right solution for the space, we are happy to talk it through before you order.

This is a wall-mounted stainless steel shelf from Parry, designed to provide a fixed, stable surface for a microwave oven in a commercial kitchen. It is a straightforward piece of equipment — no electrics, no plumbing — but it addresses a common problem in kitchens where worktop space is at a premium and the microwave needs to be positioned safely away from the main prep area.

In day-to-day service, positioning the microwave at a consistent, accessible height keeps it clear of food preparation surfaces and supports a more organised workflow. This matters most in compact pass areas, café kitchens, staff canteens, and servery counters where every usable surface tends to be spoken for. Wall-mounting removes the microwave from the counter equation entirely, which makes a practical difference in smaller operations.

• Stainless steel construction suits the hygiene requirements of commercial kitchens
• Pre-drilled brackets supplied, reducing installation effort on site
• Supplied for self-assembly with no specialist tools required
• Wall-mounted position frees up valuable counter and prep space
• Compatible with standard commercial microwave ovens

Installation is uncomplicated, but it is worth confirming your wall construction before fitting. Solid masonry or suitably reinforced stud walls are preferable — the wall needs to comfortably support the combined weight of the shelf and the microwave unit. No electrical or plumbing work is involved with the shelf itself.

This shelf is well suited to smaller catering operations, front-of-house servery areas, and kitchens where a microwave is in regular use but space is limited. For larger or heavier microwave units, it is worth considering a wider or more heavily rated alternative before committing.

If you want to confirm whether this shelf is the right match for your wall type, microwave, or available space, the team is happy to talk it through.

The Parry WCS is a wall-mounted stainless steel cupboard designed to provide overhead storage in commercial kitchens. It is a straightforward, practical unit — the kind of fabrication that does a specific job reliably without complicating the space around it.

The defining feature is the sliding door arrangement. In many kitchen layouts, a hinged door above a prep run, pass, or tight service corridor creates a real obstruction hazard during busy periods. Sliding doors eliminate that problem entirely, making this unit a sensible choice wherever staff are working directly below or the available clearance in front is limited. Construction is in Type 430 stainless steel, the standard grade used across commercial fabrication, which handles the heat, steam, and repeated cleaning that kitchen environments demand day to day.

Inside, a single shelf is adjustable between two height positions, giving operators a degree of flexibility depending on what is being stored. A lockable version is available on request, which is worth specifying in operations where stock control or restricted access to particular items is a practical consideration.

• Sliding doors eliminate door-swing clearance requirements in confined spaces
• Type 430 stainless steel construction withstands daily kitchen cleaning routines
• Adjustable internal shelf configurable between two positions
• Wall-mounted installation keeps worksurfaces and floor area free
• Lockable variant available for stock security or controlled-access requirements

This cupboard suits small and medium commercial kitchens that need reliable, no-fuss overhead storage. For operations requiring a larger unit or a coordinated run of wall cabinets, there are alternative sizes worth considering. If you have questions about sizing or positioning relative to your existing layout, the team is happy to talk it through before you order.

The Parry WCH is a wall-mounted stainless steel cupboard designed for enclosed, hygienic storage in commercial kitchen environments. The hinged door keeps contents protected from grease, steam, and airborne contamination — a meaningful advantage over open shelving in areas where dust, moisture, or splashing is a regular concern. An internal shelf divides the storage space to allow a degree of organisation for dry goods, small equipment, condiments, or service items.

Wall-mounted cupboards of this type are commonly used in kitchens where worktop space is at a premium. Positioning one above a prep surface or alongside a servery keeps frequently used items within reach without cluttering the work area below. The enclosed format also makes it a practical choice where contents need to remain clean and contained between services.

The main operational advantages are worth noting clearly:

• Enclosed design protects contents from kitchen grease, steam, and splashing
• Hinged door allows quick, one-handed access during busy service periods
• Stainless steel construction wipes down easily and supports hygiene compliance
• Wall-mounted installation keeps floor and worktop areas free for operational use
• Lockable option available where restricted-access storage is required

Installation requires a solid wall capable of supporting the loaded weight of the unit. The correct fixings will depend on wall construction — masonry, stud partitions, and tiled surfaces each require different anchor types, so it is worth confirming this with your installer before the unit goes up. The door swing also needs clear clearance, so consider nearby equipment and foot traffic when selecting a position.

This cupboard is well suited to smaller and medium-sized kitchens needing straightforward enclosed wall storage. Sites with significantly greater storage demands or more complex fabrication requirements may find it worth exploring larger or heavier-duty wall units.

If you are working out the most practical storage layout for your kitchen, we are happy to talk it through before you place an order.

This is a wall-mounted single shelf from Parry, manufactured in stainless steel and available across a range of widths to suit different kitchen layouts. At 400mm deep, it provides a practical run of wall-level storage for mise en place, dry goods, small equipment, or utensils, keeping the worktop below clear without consuming any floor space.

In a working commercial kitchen, the usefulness of overhead shelving comes down to proximity and organisation. Keeping regularly used items within reach of a prep station or cooking line reduces unnecessary movement during service and helps the team maintain focus when the pace picks up. Stainless steel is the appropriate material for this environment — it handles moisture, heat, and daily cleaning reliably, and it does not deteriorate in the way that painted or coated alternatives can over time.

Practical day-to-day advantages include:

• Stainless steel surface wipes down quickly and meets commercial hygiene standards
• Pre-drilled brackets are included, simplifying installation from the outset
• Multiple width options allow the shelf to be matched to different wall spans and station sizes
• Open design allows quick visual checks of stock levels during service
• Robust construction suited to the loads commonly carried in a commercial kitchen

Installation is straightforward in most cases, but it is worth confirming your wall construction before ordering. Masonry and solid walls are the most suitable substrate for this type of fixing. Stud or partition walls may require additional noggins or support to carry the load safely — a detail worth establishing at the planning stage rather than on the day of installation.

This shelf works well across a wide range of operations, from single-shelf installations above a compact prep station to multiple units arranged across a longer wall run. Where loads are particularly heavy or spans are long, it is worth considering whether a heavier-duty shelving option would be more appropriate for those specific areas.

If you are specifying wall storage as part of a broader kitchen fit-out and want to talk through the right approach for each area, the team is happy to help.

This is a wall-mounted stainless steel shelf designed to support a freestanding microwave oven in a commercial kitchen environment. It is a straightforward, practical piece of fabrication — nothing more, nothing less — built to keep a microwave safely positioned at a usable working height without taking up counter space.

The shelf is constructed from 430-grade stainless steel with a three-sided folded form. The side cheeks are folded back to add rigidity, and a 30mm turn-down with a return flange runs along the front edge to prevent the shelf platform from flexing under load. It is not a heavy-duty bracket system, but for a standard counter-top microwave in a café, staff canteen, pub kitchen, or light-service operation, it is a sensible and reliable solution.

In practical terms, the benefits are straightforward:

• Keeps the microwave off the worktop, freeing counter space for prep
• Pre-drilled side cheeks make wall fixing reasonably straightforward
• Two depth options accommodate different microwave footprints
• Stainless steel construction suits food-safe environments and wipes down easily
• The folded construction adds strength without unnecessary material weight

Installation requires secure fixing into a solid wall or adequate backing structure — fixings are not supplied, and this is worth factoring in if the wall construction is anything other than masonry or studwork with noggins. The shelf is best suited to standard domestic-footprint commercial microwaves rather than larger combination units.

This shelf is well suited to smaller or lower-volume operations where a microwave plays a supporting role in the kitchen rather than a primary one. For higher-output sites running larger or heavier microwave units, a heavier-duty wall mounting solution may be more appropriate.

If you are unsure which depth suits your microwave or whether this shelf is adequate for your intended load, our team is happy to help you choose correctly before you order.

These stainless steel wall cupboards are a practical overhead storage solution for commercial kitchens. Available in five standard widths, they are designed to fit neatly above preparation surfaces, pass-throughs, or service lines where accessible, lockable storage is needed without the swing clearance that hinged doors require. The sliding door configuration makes them particularly well suited to kitchens where space in front of the unit is limited or where staff need to access contents quickly during a busy service.

In a working kitchen environment, the sliding door design earns its place. There is no door swinging into a walkway or catching a passing member of staff, and both doors can be removed entirely without tools for thorough deep cleaning — a practical advantage when hygiene standards require regular inspection of internal surfaces. The internal mid shelf is adjustable in height, which allows operators to configure the interior around the items being stored rather than working around a fixed shelf position.

Key operational features worth noting:

• Sliding doors removable without tools, supporting thorough deep cleaning
• Adjustable internal mid shelf to suit different storage configurations
• Lockable doors for controlled access to stored items
• Rear upstand on the roof edge for sealing against a wall where items are stored on top
• Five width options to suit different wall runs and kitchen layouts

Installation is straightforward wall-mounting, though the specific fixings and wall construction should be assessed before fitting — stainless steel catering cupboards carry meaningful weight when loaded, and the fixing method needs to suit the substrate. The 300mm depth keeps the units from projecting too far over a work surface, though this is worth measuring against your current worktop depth before ordering.

These cupboards are well suited to cafés, school kitchens, care home catering facilities, and similar operations where reliable, hygienic overhead storage is needed day to day. For larger operations or sites requiring deeper storage or additional shelving tiers, it is worth reviewing the wider storage catalogue to confirm the right configuration.

If you are fitting out a new kitchen or replacing existing wall storage, the team are happy to talk through what will work best for your specific layout before you commit to a size.

The Evapor8 splashback is a wall-mounted protective panel made from diatomite, a naturally occurring mineral sediment with inherent absorbent and evaporative properties. Rather than simply deflecting water, the material draws moisture in and releases it as vapour, which means surfaces behind and below the panel stay dry without any active intervention from staff.

In commercial environments — particularly washrooms, hand-wash stations, and areas beneath hand dryers — water splashback is a persistent hygiene and maintenance issue. Wet walls attract mould, create slip risks on flooring, and require regular cleaning attention. The diatomite construction is naturally anti-microbial and anti-mildew, which makes it well suited to areas where hand hygiene compliance is important and where surfaces need to remain clean between routine cleans.

From an operational standpoint, the practical advantages are straightforward:

• Prevents water marking and surface staining on walls behind sinks and dryers
• Reduces excessive localised humidity that can encourage mould growth
• Requires minimal maintenance — no treatments or specialist cleaning products needed
• Comes with four pre-drilled fixing holes for straightforward installation
• Backed by a lifetime replacement promise, reducing long-term replacement costs

Installation is simple and requires only basic wall fixings. The panel is designed to sit flush against the wall and is most commonly positioned directly beneath hands-free or hands-under hand dryers, or behind hand-wash sinks. At 3.2kg it is lightweight enough for one person to fit without assistance. It is not intended for use in areas subject to continuous water flow or immersion.

This panel is a practical choice for commercial kitchens, food prep areas, staff washrooms, and front-of-house cloakrooms where maintaining a dry, hygienic wall surface is a day-to-day concern. For larger coverage areas, wider panel options may be more appropriate.

If you are unsure which size or configuration best suits your installation, the team is happy to talk it through with you.

The Evapor8 splashback is a wall-mounted panel designed to manage water splash in commercial washrooms, particularly in areas directly below hand dryers or adjacent to hand-washing facilities. It is made from diatomite, a naturally occurring rock sediment with a highly porous structure that absorbs water rapidly and releases it through evaporation, keeping the wall surface and floor dry without the need for regular intervention.

In busy commercial environments — restaurants, hotels, pubs, care homes, and schools — the area beneath a hand dryer takes a constant stream of water droplets during service periods. Standard painted or tiled walls can develop water staining, damp patches, and mould over time, creating hygiene concerns and maintenance overhead. The diatomite panel addresses this by dealing with moisture at the point of impact rather than allowing it to run or accumulate.

From an operational standpoint, the practical advantages are straightforward:

• Diatomite is naturally anti-microbial and anti-mildew, reducing the risk of bacterial or mould growth in high-traffic washroom areas
• The grey marble finish is neutral and presentable in most commercial settings
• Minimal maintenance is required — no specialist cleaning products needed
• Pre-drilled fixing holes make installation straightforward without specialist trades
• Backed by a lifetime replacement promise, which reduces long-term waste and replacement cost

Installation is wall-mounted using four pre-drilled screw holes. No electrical connection, water supply, or ventilation provision is required. The panel is suited to standard stud, masonry, or tiled walls, though fixing method will depend on the substrate. At 3.2kg, it is manageable for a single person to fit. It is worth confirming the wall surface is sound and dry before installation to ensure a reliable fixing.

This panel is well suited to single or low-traffic washrooms in hospitality, healthcare, and food service settings. For higher-volume or multi-dryer installations, it is worth considering whether a wider or multi-panel configuration would provide better coverage of the splash zone.

If you are unsure whether this format suits your washroom layout or dryer position, our team is happy to help you work through the options before you order.

These stainless steel end brackets are designed to support commercial plate racks, providing a stable and hygienic mounting solution in professional kitchen environments. Sold in pairs, they are a straightforward replacement or addition component for operators looking to fit or extend plate rack storage.

In a working kitchen, plate storage needs to be reliable and easy to maintain. Stainless steel construction means these brackets resist corrosion and can be wiped down quickly during cleaning routines — a practical consideration in any environment where hygiene standards are closely managed. The material also holds up well under the day-to-day handling that comes with busy service periods.

• Corrosion-resistant stainless steel suits damp kitchen environments
• Sold in pairs, covering both ends of a standard plate rack run
• Straightforward to fit as a replacement or new installation component
• Easy to clean and maintain to food hygiene standards

These brackets are best suited to operators fitting or replacing plate rack systems in commercial kitchens, canteens, or serveries. They are a functional component rather than a standalone storage solution, so it is worth confirming compatibility with your existing or planned plate rack before ordering.

If you are unsure whether these brackets will suit your current setup, the team is happy to help you check before you commit to an order.

This Vogue wire wall shelf is a straightforward, practical storage solution for commercial kitchens. Constructed from chrome-coated steel wire, the open grid design allows air to circulate freely around stored items — useful wherever ventilation around equipment or produce matters. It comes supplied with mounting brackets ready for wall installation.

In a working kitchen environment, this type of shelf earns its place through simplicity. The open wire construction means spills drain rather than pool, cleaning is quick, and staff can see stored items at a glance without pulling things off the shelf. It handles pots, pans, dry goods, and lighter service items without fuss, and the 30kg load rating is sufficient for typical day-to-day kitchen storage demands.

• Open wire design promotes airflow and reduces moisture build-up
• Chrome coating resists corrosion in humid kitchen conditions
• Transparent from below — contents visible without removing items
• Straightforward to wipe down and keep clean during service
• Supplied with brackets, ready to mount without additional fixings

Installation is wall-mounted, so surface material and stud or masonry fixing points need to be considered before fitting. The shelf is well suited to smaller to mid-sized kitchens, prep areas, and back-of-house storage runs. For operations requiring significantly more shelf depth, load capacity, or a full shelving bay, there are heavier-duty configurations worth considering.

If you're fitting out a storage wall or working out the right shelving layout for your kitchen, the team are happy to help you think it through before you order.

This Vogue stainless steel wall cupboard is a straightforward, wall-mounted storage unit designed to increase usable storage capacity in commercial kitchens without consuming valuable floor space. It features sliding doors rather than hinged ones, which makes it a practical choice where space around the unit is tight, and a central internal shelf provides a simple way to organise equipment, dry goods, or smaller appliances across two levels.

In a working kitchen environment, wall-mounted storage of this kind earns its place by keeping surfaces clear and frequently used items accessible without cluttering prep areas. The sliding door mechanism is particularly well suited to galley-style kitchens, narrow service corridors, or any area where a swinging door would create an obstruction during busy service periods. Stainless steel construction holds up well under the demands of daily commercial use — resisting moisture, knocks, and the cleaning chemicals routinely used in professional kitchens.

From an operational standpoint, the key advantages are:

• Wall mounting keeps floor space free for equipment and foot traffic
• Sliding doors open without encroaching on adjacent workstations or walkways
• Stainless steel surfaces are straightforward to wipe down and maintain to food-safe hygiene standards
• The central shelf effectively doubles usable internal storage across the cabinet height
• Robust construction suitable for the everyday wear of a commercial kitchen environment

Installation requires secure fixing to a wall capable of bearing the loaded weight of the unit, so it is worth confirming wall construction before ordering — timber stud, masonry, and solid block walls all have different fixing requirements. This is a wall-hung unit, so adequate ceiling clearance and wall height are also worth checking against the overall dimensions before purchase.

This cupboard is well suited to small and medium-sized kitchens — cafés, pub kitchens, school canteens, and similar operations — where additional overhead storage is needed but floor space is at a premium. For larger operations needing significantly greater storage capacity, a heavier-duty or larger-format unit may be a better fit.

If you are unsure whether this unit is the right size or specification for your kitchen layout, the team is happy to talk it through before you commit to an order.

This Vogue stainless steel wall cupboard is a straightforward overhead storage solution designed for commercial kitchens where floor space is at a premium. Constructed from stainless steel throughout, it mounts to the wall to keep work surfaces and floor areas clear, with a central internal shelf providing two usable storage zones for dry goods, small equipment, or service items.

The sliding door design is a practical consideration in tighter kitchen layouts. Where hinged doors would obstruct walkways or conflict with adjacent equipment, sliding doors allow staff to access the cupboard without interrupting workflow or creating hazards during a busy service. This makes the unit well suited to compact prep areas, back-of-house corridors, and kitchens where every square metre counts.

From an operational standpoint, the stainless steel construction holds up well under the humidity and temperature fluctuations typical of a working kitchen, and it wipes down quickly at the end of service — an important factor where hygiene standards are monitored closely. Key practical advantages include:

• Wall-mounted design keeps floor and counter space free for operational use
• Sliding doors eliminate swing clearance requirements in restricted spaces
• Stainless steel surfaces are straightforward to clean and resistant to moisture
• Central shelf divides the interior into two accessible storage levels
• Suitable for storing dry goods, small appliances, and service equipment

Installation requires secure fixing into appropriate wall structure — masonry or studwork with adequate load-bearing capacity. It is worth confirming the wall construction before ordering, particularly in older or partitioned kitchen environments. For sites needing significantly more overhead storage capacity, larger or multi-unit configurations may be worth considering.

This cupboard is a practical fit for small to medium commercial kitchens, cafés, pub kitchens, and staff catering operations where overhead storage is needed without taking up valuable floor area. If you are fitting out a new kitchen or reorganising an existing one and want guidance on storage layouts, our team is happy to talk it through.

This is a wall-mounted stainless steel shelf designed to support a commercial microwave or similar countertop equipment above a preparation or service area. It is a straightforward, practical piece of kitchen infrastructure — not a complex piece of equipment, but one that does an important job reliably when specified correctly.

In busy kitchens, a well-positioned microwave shelf keeps the unit off the worktop, freeing up valuable prep space below. The stainless steel construction handles the heat, steam, and cleaning chemicals typical of a commercial environment without corroding or deteriorating over time. The quality of the welding is worth noting — a shelf carrying a heavy microwave at height needs to be structurally sound, and this unit is built to a standard appropriate for that responsibility.

Practical advantages for kitchen operators include:

• Frees up worktop space directly below the microwave position
• Stainless steel finish is easy to wipe down and resistant to corrosion
• Solid construction supports a microwave and associated items without flex
• Polished finish is hygienic and straightforward to keep clean
• Suitable for fixing in position above counters, pass areas, or service stations

Before ordering, it is worth confirming that your wall structure can support the shelf and its load at the intended fixing points — masonry or properly noggin-supported stud walls are preferable. The shelf dimensions should also be measured against your microwave footprint to ensure a comfortable fit with adequate clearance on each side.

This shelf is well suited to cafés, pub kitchens, school canteens, and similar operations where a single microwave is positioned at height for convenience. Sites running multiple microwaves or requiring a larger surface area may find a heavier-duty or extended shelving solution more appropriate.

If you are unsure whether this shelf suits your wall type, microwave size, or workflow setup, the team is happy to talk it through with you.

This is a straightforward chrome-coated steel wire wall shelf designed for general storage in commercial kitchen environments. At 1220mm wide and 360mm deep, it offers a practical run of usable wall space without projecting excessively into the working area. The open wire construction allows air to circulate around stored items, which helps reduce moisture build-up — a useful characteristic when storing pots, pans, or dry goods near cooking areas.

In a working kitchen, wall shelving tends to carry constant low-level load throughout a shift — spare equipment, mise en place containers, lids, and lighter dry goods. The 30kg rated capacity is adequate for this kind of everyday use, and the chrome coating provides reasonable corrosion resistance in the warm, humid conditions typical of a commercial kitchen. Brackets are included, so it can be mounted directly to a solid wall without additional fixings.

Practical considerations worth bearing in mind:

• Requires a solid masonry or stud wall capable of supporting the loaded weight
• Chrome coating suits most kitchen environments but is not stainless steel — avoid prolonged exposure to heavy steam or harsh cleaning chemicals
• Open wire surface is easy to wipe down but not suitable for storing small loose items without a liner

This shelf is well suited to smaller kitchens, prep areas, or back-of-house storage where a single run of additional wall space makes a practical difference. For larger operations needing multiple bays or higher load ratings, heavier-duty shelving systems may be more appropriate.

If you are planning wall storage across a kitchen and want to make sure the spec fits your layout and wall construction, we are happy to talk it through.

This 1200mm wall-mounted shelf from Vogue is a straightforward, practical storage solution for commercial kitchens. Constructed from grade 430 stainless steel, it is designed to be fixed directly to a wall, freeing up worktop and floor space while keeping cookware and dry goods within easy reach of the prep area.

The shelf uses a rod construction rather than a solid surface, which serves two practical purposes. Pots, pans, and ladles can be hung between the rods or rested across them, making efficient use of the full shelf depth. The open rod format also allows air to circulate, which makes it a reasonable choice for storing dry goods or ingredients that benefit from ventilation rather than being confined to a closed cupboard.

In a working kitchen environment, the key practical advantages are:

• Wall-mounted installation keeps floor and worktop space clear
• Rod design accommodates hanging cookware as well as rested items
• Stainless steel 430 construction withstands regular cleaning and kitchen humidity
• Rated to 75kg, giving reasonable capacity for pots, pans, and dry store items
• Open rod format promotes air circulation around stored goods

Installation requires secure fixing into a suitable wall structure capable of bearing the loaded weight. It is worth confirming wall substrate and fixing points before installation, particularly in older kitchen builds where walls may be tiled over softer material. The shelf projects 300mm from the wall, so positioning relative to adjacent equipment and passage routes should be considered during planning.

This shelf is well suited to small and medium commercial kitchens, café prep areas, and back-of-house storage runs where a reliable, easy-to-clean overhead shelf is needed. For larger operations or heavier storage loads, a longer or more heavy-duty shelf configuration may be more appropriate.

If you are fitting out a run of wall shelving or are unsure whether this size suits your layout, the team is happy to talk through your requirements.

This Vogue stainless steel wall shelf provides a straightforward, practical storage solution for commercial kitchens. At 1800mm wide, it offers a generous run of overhead storage space suitable for holding equipment, dry goods, and smaller items that need to be kept within reach of the preparation or service area. Brackets are included, and the shelf is finished in full stainless steel throughout.

In day-to-day kitchen use, a shelf of this width earns its place above prep benches, pass areas, or along back-of-house walls where bench space is at a premium. The 50kg load capacity is adequate for the typical mix of containers, small appliances, and dry store items a kitchen section might keep overhead. Sound-deadening pads on the underside help reduce the rattle and vibration that can otherwise be a nuisance in a busy service environment.

The practical advantages of stainless steel in a kitchen environment are well understood:

• Non-porous surface resists moisture, grease, and food debris
• Easy to wipe down during or after service
• Compatible with commercial cleaning products without surface damage
• Consistent with stainless prep benches and equipment for a uniform finish
• Sound-deadening pads reduce vibration noise during service

Installation requires wall fixings appropriate for your wall construction — solid masonry, studwork, and tiled walls each have different requirements, and the fixings used should be rated to comfortably handle the shelf weight plus load. At 1800mm, the shelf will need at least two fixing points and ideally three for stability under load. Consider the height at which it is mounted carefully: too high and it becomes impractical for frequent access; too low and it may obstruct workflow.

This shelf is well suited to smaller independent kitchens, cafés, and catering operations where a single long overhead shelf meets the storage requirement. Sites with significantly heavier storage demands, or where multiple shelf runs are needed at height, may find a heavier-duty shelving system with greater load ratings a more appropriate fit.

If you are unsure whether this shelf will work in your specific space or alongside your existing equipment layout, our team is happy to talk it through with you.