Microwave and Wire Shelves, Racks and Accessories

This is a wall-mounted stainless steel shelf designed to support a commercial microwave or similar countertop equipment above a preparation or service area. It is a straightforward, practical piece of kitchen infrastructure — not a complex piece of equipment, but one that does an important job reliably when specified correctly.

In busy kitchens, a well-positioned microwave shelf keeps the unit off the worktop, freeing up valuable prep space below. The stainless steel construction handles the heat, steam, and cleaning chemicals typical of a commercial environment without corroding or deteriorating over time. The quality of the welding is worth noting — a shelf carrying a heavy microwave at height needs to be structurally sound, and this unit is built to a standard appropriate for that responsibility.

Practical advantages for kitchen operators include:

• Frees up worktop space directly below the microwave position
• Stainless steel finish is easy to wipe down and resistant to corrosion
• Solid construction supports a microwave and associated items without flex
• Polished finish is hygienic and straightforward to keep clean
• Suitable for fixing in position above counters, pass areas, or service stations

Before ordering, it is worth confirming that your wall structure can support the shelf and its load at the intended fixing points — masonry or properly noggin-supported stud walls are preferable. The shelf dimensions should also be measured against your microwave footprint to ensure a comfortable fit with adequate clearance on each side.

This shelf is well suited to cafés, pub kitchens, school canteens, and similar operations where a single microwave is positioned at height for convenience. Sites running multiple microwaves or requiring a larger surface area may find a heavier-duty or extended shelving solution more appropriate.

If you are unsure whether this shelf suits your wall type, microwave size, or workflow setup, the team is happy to talk it through with you.

Size: 910(W) x 360(D)mm. Material: Chrome-coated steel. Maximum load: 30kg. Multipurpose shelves made from high quality nickel chrome coated steel wire to allow circulation, ideal for storing pans etc. Max load capacity 30kg. Supplied with brackets.

Size: 610(W) x 360(D)mm. Material: Chrome coated steel. Maximum load: 30kg. Multipurpose shelves made from high quality nickel chrome coated steel wire to allow circulation, ideal for storing pans etc. Max load capacity 30kg. Supplied with brackets.

Size: 1220(W) x 360(D)mm. Material: Chrome coated steel. Maximum load: 30kg. Multipurpose shelves made from high quality nickel chrome coated steel wire to allow circulation, ideal for storing pans etc. Max load capacity 30kg. Supplied with brackets.

This is a purpose-built wall-mounted shelf designed to hold a freestanding microwave oven in a commercial kitchen environment. Constructed from 430 grade stainless steel and mounted on welded cantilever box section wall brackets, it keeps the microwave off the worktop and positions it at a practical working height on the pass or in a servery area.

In busy kitchens where worktop space is at a premium, getting the microwave off the counter makes a meaningful difference to workflow. A dedicated shelf keeps the unit stable, positions the cable neatly behind the rear upstand, and frees up preparation or plating space below. The turned-down edges and rear upstand add rigidity to the shelf and help prevent the microwave from shifting during service.

• Keeps the microwave at a consistent, accessible height throughout service
• Rear upstand channels the power cable tidily behind the shelf
• Stainless steel construction wipes down cleanly and resists the moisture common in kitchen environments
• Pre-drilled brackets simplify installation against a wall stud or solid masonry surface
• Frees up worktop or counter space in tight service areas

Installation is straightforward, but the wall fixing points need to be sound — the brackets are pre-drilled, but fixings are not supplied and the wall construction will determine what fixings are appropriate. It is worth confirming that the wall can bear the combined weight of the shelf and a loaded microwave before fitting. Two depth options are available to suit different microwave footprints, so checking the depth of your unit before ordering is advisable.

This shelf suits smaller operations — cafés, pub kitchens, school canteens, care homes — where one or two microwaves are in regular use and wall space is available near the pass. For sites running multiple microwaves in a high-volume operation, a purpose-built shelving run may be a more practical solution.

If you are unsure which size suits your microwave or whether this fits your kitchen layout, the team is happy to talk it through with you.

This is a wall-mounted stainless steel shelf designed to support a freestanding microwave oven in a commercial kitchen environment. It is a straightforward, practical piece of fabrication — nothing more, nothing less — built to keep a microwave safely positioned at a usable working height without taking up counter space.

The shelf is constructed from 430-grade stainless steel with a three-sided folded form. The side cheeks are folded back to add rigidity, and a 30mm turn-down with a return flange runs along the front edge to prevent the shelf platform from flexing under load. It is not a heavy-duty bracket system, but for a standard counter-top microwave in a café, staff canteen, pub kitchen, or light-service operation, it is a sensible and reliable solution.

In practical terms, the benefits are straightforward:

• Keeps the microwave off the worktop, freeing counter space for prep
• Pre-drilled side cheeks make wall fixing reasonably straightforward
• Two depth options accommodate different microwave footprints
• Stainless steel construction suits food-safe environments and wipes down easily
• The folded construction adds strength without unnecessary material weight

Installation requires secure fixing into a solid wall or adequate backing structure — fixings are not supplied, and this is worth factoring in if the wall construction is anything other than masonry or studwork with noggins. The shelf is best suited to standard domestic-footprint commercial microwaves rather than larger combination units.

This shelf is well suited to smaller or lower-volume operations where a microwave plays a supporting role in the kitchen rather than a primary one. For higher-output sites running larger or heavier microwave units, a heavier-duty wall mounting solution may be more appropriate.

If you are unsure which depth suits your microwave or whether this shelf is adequate for your intended load, our team is happy to help you choose correctly before you order.

The Designline rodded pot rack is a wall-mounted, open-framed drainage shelf designed for storing and air-drying pots, pans, and cooking utensils in commercial kitchens. The open rod construction allows water to drain freely, making it particularly well suited to positioning above sink areas where wet equipment is stacked after washing.

In a busy kitchen environment, having a dedicated place to land freshly washed pots speeds up the washing cycle and keeps worktops and sink surrounds clear during service. The open design also means air circulates around stored items, which supports hygiene and reduces the risk of water pooling that can occur on solid shelving. The rack is available in a wide range of lengths and depths, so it can be sized to the available wall space and the volume of utensils a kitchen typically turns over.

A few practical points worth considering before ordering:

• Integral cantilever wall brackets are pre-drilled, but fixings are not supplied — the appropriate fixings will depend on the wall construction
• Longer lengths include additional support brackets, which is worth factoring in during installation planning
• The rack is wall-mounted only; there is no freestanding option in this range
• Wall construction and load-bearing capacity should be assessed before installation, particularly in older or partitioned kitchen builds

This rack is well suited to kitchens of most sizes — from smaller independent operations through to larger contract or hotel kitchens — where dedicated pot storage and drainage space above the sink is a practical priority. If your operation involves extremely high utensil throughput or particularly heavy stockpots, it is worth discussing load requirements before selecting a size.

If you are unsure which length and depth combination best fits your sink run or available wall space, the team is happy to help you work it out before you order.

This is a straightforward, purpose-built shelf designed to provide a secure, hygienic surface for positioning a microwave in a commercial kitchen environment. Constructed from 430-grade stainless steel, it is built to hold the weight demands typical of commercial microwave units and to withstand the heat, moisture, and cleaning chemicals that are part of daily kitchen life.

In practical terms, a dedicated microwave shelf keeps the unit at a safe and ergonomic working height, freeing up valuable counter space and reducing the risk of the microwave being moved or knocked during a busy service. The stainless steel construction cleans down quickly and does not corrode, rust, or harbour bacteria in the way that painted or laminated surfaces can over time.

• Keeps the microwave at a consistent, accessible height for kitchen staff
• Frees up counter and prep space during service
• Stainless steel surface wipes clean easily and resists corrosion
• Suitable for wall-mounting in pass areas, counters, or back-of-house positions
• Rated to support the weight of most commercial microwave units

Before fitting, it is worth confirming the wall construction is suitable for the intended fixing method and that the shelf position allows adequate clearance around the microwave for ventilation. The shelf is intended for indoor commercial use and is not rated for outdoor or refrigerated environments.

This shelf suits smaller kitchens, cafés, and back-of-house areas where a reliable, no-fuss solution is needed. For operations requiring multiple microwave positions or heavier overhead storage, it is worth considering a heavier-duty shelving system instead.

If you are unsure whether this shelf suits your specific microwave unit or wall setup, the team is happy to help you check before you order.

330 x 330mm. For Plate Rack. Sold in Pairs Stainless steel end brackets available for plate racks.

This is a wall-mounted stainless steel shelf from Parry, designed to provide a fixed, stable surface for a microwave oven in a commercial kitchen. It is a straightforward piece of equipment — no electrics, no plumbing — but it addresses a common problem in kitchens where worktop space is at a premium and the microwave needs to be positioned safely away from the main prep area.

In day-to-day service, positioning the microwave at a consistent, accessible height keeps it clear of food preparation surfaces and supports a more organised workflow. This matters most in compact pass areas, café kitchens, staff canteens, and servery counters where every usable surface tends to be spoken for. Wall-mounting removes the microwave from the counter equation entirely, which makes a practical difference in smaller operations.

• Stainless steel construction suits the hygiene requirements of commercial kitchens
• Pre-drilled brackets supplied, reducing installation effort on site
• Supplied for self-assembly with no specialist tools required
• Wall-mounted position frees up valuable counter and prep space
• Compatible with standard commercial microwave ovens

Installation is uncomplicated, but it is worth confirming your wall construction before fitting. Solid masonry or suitably reinforced stud walls are preferable — the wall needs to comfortably support the combined weight of the shelf and the microwave unit. No electrical or plumbing work is involved with the shelf itself.

This shelf is well suited to smaller catering operations, front-of-house servery areas, and kitchens where a microwave is in regular use but space is limited. For larger or heavier microwave units, it is worth considering a wider or more heavily rated alternative before committing.

If you want to confirm whether this shelf is the right match for your wall type, microwave, or available space, the team is happy to talk it through.