Vogue Commercial Kitchen Wall Cupboards and Shelves

This is a wall-mounted stainless steel shelf designed to support a commercial microwave or similar countertop equipment above a preparation or service area. It is a straightforward, practical piece of kitchen infrastructure — not a complex piece of equipment, but one that does an important job reliably when specified correctly.

In busy kitchens, a well-positioned microwave shelf keeps the unit off the worktop, freeing up valuable prep space below. The stainless steel construction handles the heat, steam, and cleaning chemicals typical of a commercial environment without corroding or deteriorating over time. The quality of the welding is worth noting — a shelf carrying a heavy microwave at height needs to be structurally sound, and this unit is built to a standard appropriate for that responsibility.

Practical advantages for kitchen operators include:

• Frees up worktop space directly below the microwave position
• Stainless steel finish is easy to wipe down and resistant to corrosion
• Solid construction supports a microwave and associated items without flex
• Polished finish is hygienic and straightforward to keep clean
• Suitable for fixing in position above counters, pass areas, or service stations

Before ordering, it is worth confirming that your wall structure can support the shelf and its load at the intended fixing points — masonry or properly noggin-supported stud walls are preferable. The shelf dimensions should also be measured against your microwave footprint to ensure a comfortable fit with adequate clearance on each side.

This shelf is well suited to cafés, pub kitchens, school canteens, and similar operations where a single microwave is positioned at height for convenience. Sites running multiple microwaves or requiring a larger surface area may find a heavier-duty or extended shelving solution more appropriate.

If you are unsure whether this shelf suits your wall type, microwave size, or workflow setup, the team is happy to talk it through with you.

Size: 910(W) x 360(D)mm. Material: Chrome-coated steel. Maximum load: 30kg. Multipurpose shelves made from high quality nickel chrome coated steel wire to allow circulation, ideal for storing pans etc. Max load capacity 30kg. Supplied with brackets.

Size: 610(W) x 360(D)mm. Material: Chrome coated steel. Maximum load: 30kg. Multipurpose shelves made from high quality nickel chrome coated steel wire to allow circulation, ideal for storing pans etc. Max load capacity 30kg. Supplied with brackets.

Size: 1220(W) x 360(D)mm. Material: Chrome coated steel. Maximum load: 30kg. Multipurpose shelves made from high quality nickel chrome coated steel wire to allow circulation, ideal for storing pans etc. Max load capacity 30kg. Supplied with brackets.

This Vogue stainless steel wall shelf provides a straightforward, practical storage solution for commercial kitchens. At 1800mm wide, it offers a generous run of overhead storage space suitable for holding equipment, dry goods, and smaller items that need to be kept within reach of the preparation or service area. Brackets are included, and the shelf is finished in full stainless steel throughout.

In day-to-day kitchen use, a shelf of this width earns its place above prep benches, pass areas, or along back-of-house walls where bench space is at a premium. The 50kg load capacity is adequate for the typical mix of containers, small appliances, and dry store items a kitchen section might keep overhead. Sound-deadening pads on the underside help reduce the rattle and vibration that can otherwise be a nuisance in a busy service environment.

The practical advantages of stainless steel in a kitchen environment are well understood:

• Non-porous surface resists moisture, grease, and food debris
• Easy to wipe down during or after service
• Compatible with commercial cleaning products without surface damage
• Consistent with stainless prep benches and equipment for a uniform finish
• Sound-deadening pads reduce vibration noise during service

Installation requires wall fixings appropriate for your wall construction — solid masonry, studwork, and tiled walls each have different requirements, and the fixings used should be rated to comfortably handle the shelf weight plus load. At 1800mm, the shelf will need at least two fixing points and ideally three for stability under load. Consider the height at which it is mounted carefully: too high and it becomes impractical for frequent access; too low and it may obstruct workflow.

This shelf is well suited to smaller independent kitchens, cafés, and catering operations where a single long overhead shelf meets the storage requirement. Sites with significantly heavier storage demands, or where multiple shelf runs are needed at height, may find a heavier-duty shelving system with greater load ratings a more appropriate fit.

If you are unsure whether this shelf will work in your specific space or alongside your existing equipment layout, our team is happy to talk it through with you.

This Vogue stainless steel wall cupboard is a straightforward, wall-mounted storage unit designed to increase usable storage capacity in commercial kitchens without consuming valuable floor space. It features sliding doors rather than hinged ones, which makes it a practical choice where space around the unit is tight, and a central internal shelf provides a simple way to organise equipment, dry goods, or smaller appliances across two levels.

In a working kitchen environment, wall-mounted storage of this kind earns its place by keeping surfaces clear and frequently used items accessible without cluttering prep areas. The sliding door mechanism is particularly well suited to galley-style kitchens, narrow service corridors, or any area where a swinging door would create an obstruction during busy service periods. Stainless steel construction holds up well under the demands of daily commercial use — resisting moisture, knocks, and the cleaning chemicals routinely used in professional kitchens.

From an operational standpoint, the key advantages are:

• Wall mounting keeps floor space free for equipment and foot traffic
• Sliding doors open without encroaching on adjacent workstations or walkways
• Stainless steel surfaces are straightforward to wipe down and maintain to food-safe hygiene standards
• The central shelf effectively doubles usable internal storage across the cabinet height
• Robust construction suitable for the everyday wear of a commercial kitchen environment

Installation requires secure fixing to a wall capable of bearing the loaded weight of the unit, so it is worth confirming wall construction before ordering — timber stud, masonry, and solid block walls all have different fixing requirements. This is a wall-hung unit, so adequate ceiling clearance and wall height are also worth checking against the overall dimensions before purchase.

This cupboard is well suited to small and medium-sized kitchens — cafés, pub kitchens, school canteens, and similar operations — where additional overhead storage is needed but floor space is at a premium. For larger operations needing significantly greater storage capacity, a heavier-duty or larger-format unit may be a better fit.

If you are unsure whether this unit is the right size or specification for your kitchen layout, the team is happy to talk it through before you commit to an order.

This Vogue wall-mounted cupboard is a straightforward stainless steel storage unit designed to make use of vertical wall space in a commercial kitchen. It features sliding doors and an internal central shelf, providing two usable storage levels for dry goods, small equipment, or serviceware without occupying any floor area.

In a working kitchen, the sliding door design is a practical choice. Unlike hinged doors, slides require no clearance arc in front of the unit, which matters in tight galley kitchens, pass areas, or prep stations where movement is constant. The unit can be accessed cleanly during a busy service without obstructing adjacent staff or equipment.

Constructed in stainless steel throughout, the cupboard is straightforward to wipe down and keep to food-safe hygiene standards. The material holds up well in the warm, humid conditions typical of a commercial kitchen environment.

• Sliding doors allow access in restricted spaces without door swing clearance
• Central shelf divides internal storage into two working levels
• All-stainless construction supports easy cleaning and hygiene compliance
• Wall-mounted design keeps floor space clear for workflow
• Suitable for dry storage, small equipment, or serviceware

Installation requires secure fixing to a wall capable of bearing the loaded weight of the unit. It is worth confirming wall construction and fixing points before ordering, particularly in kitchens with plasterboard or stud partition walls where additional reinforcement may be needed.

This cupboard is well suited to smaller commercial kitchens, café back-of-house areas, and prep rooms where storage is needed at height but floor space is at a premium. For operations with higher storage demands or heavier equipment to house, a larger or heavier-duty wall unit may be more appropriate.

If you are unsure whether this unit is the right fit for your available wall space or storage requirements, our team is happy to talk it through with you.

This Vogue stainless steel wall cupboard is a straightforward overhead storage solution designed for commercial kitchens where floor space is at a premium. Constructed from stainless steel throughout, it mounts to the wall to keep work surfaces and floor areas clear, with a central internal shelf providing two usable storage zones for dry goods, small equipment, or service items.

The sliding door design is a practical consideration in tighter kitchen layouts. Where hinged doors would obstruct walkways or conflict with adjacent equipment, sliding doors allow staff to access the cupboard without interrupting workflow or creating hazards during a busy service. This makes the unit well suited to compact prep areas, back-of-house corridors, and kitchens where every square metre counts.

From an operational standpoint, the stainless steel construction holds up well under the humidity and temperature fluctuations typical of a working kitchen, and it wipes down quickly at the end of service — an important factor where hygiene standards are monitored closely. Key practical advantages include:

• Wall-mounted design keeps floor and counter space free for operational use
• Sliding doors eliminate swing clearance requirements in restricted spaces
• Stainless steel surfaces are straightforward to clean and resistant to moisture
• Central shelf divides the interior into two accessible storage levels
• Suitable for storing dry goods, small appliances, and service equipment

Installation requires secure fixing into appropriate wall structure — masonry or studwork with adequate load-bearing capacity. It is worth confirming the wall construction before ordering, particularly in older or partitioned kitchen environments. For sites needing significantly more overhead storage capacity, larger or multi-unit configurations may be worth considering.

This cupboard is a practical fit for small to medium commercial kitchens, cafés, pub kitchens, and staff catering operations where overhead storage is needed without taking up valuable floor area. If you are fitting out a new kitchen or reorganising an existing one and want guidance on storage layouts, our team is happy to talk it through.

This Vogue wall-mounted cupboard is a straightforward stainless steel storage unit designed to free up floor space in commercial kitchens where room is at a premium. It mounts to the wall, keeping the working area beneath clear, and features sliding doors rather than outward-opening ones — a practical choice in tight galley layouts or anywhere staff movement is dense. An internal central shelf divides the space and allows equipment, dry goods, or small utensils to be organised on two levels.

In a working kitchen, wall storage of this type earns its place by keeping frequently needed items accessible without contributing to floor clutter. The sliding door mechanism holds up well to the kind of repeated, sometimes rough handling that comes with busy service periods, and the all-stainless construction means there are no painted surfaces or particleboard edges to deteriorate in a humid kitchen environment.

From a practical standpoint, the key advantages are:

• Sliding doors open without encroaching into the working aisle
• Stainless steel surfaces wipe clean quickly and meet food-safe hygiene standards
• Wall-mounted installation keeps the floor beneath accessible for cleaning
• Internal shelf provides two usable storage levels within the same footprint
• Robust construction holds up to daily commercial use without surface degradation

Installation requires solid wall fixings appropriate to the wall type and load — masonry fixings into a brick or block wall are straightforward, but a timber-stud or dry-lined partition will need additional support to carry a loaded cabinet safely. Ensure the fixing points are located correctly before installation, as repositioning afterwards is not simple. The unit is suited to kitchens of most sizes; for larger sites needing significantly more wall storage, units with greater width or additional shelving may be worth considering.

This cupboard is a sensible choice for cafés, small restaurant kitchens, staff canteens, and food prep areas where wall space is available and floor space is not. It works particularly well in back-of-house areas alongside preparation benches. Sites with very high-volume storage needs may find a single unit insufficient and should consider whether multiple units or a larger alternative would better serve them.

If you're unsure whether this unit is the right fit for your kitchen layout or fixing situation, we're happy to talk it through before you order.

This 1500mm wall-mounted shelf from Vogue is a straightforward, practical storage solution for commercial kitchens. Constructed from grade 430 stainless steel and built around a three-rod design, it provides a generous run of accessible storage along a single wall fixing point. The rod configuration makes it equally useful for hanging and resting cookware as it does for storing dry goods — the open spacing between rods allows air to circulate, which helps keep dry ingredients in better condition than they would be in an enclosed unit.

In a working kitchen environment, wall shelving like this earns its place by freeing up prep table and floor space. A 1500mm run gives enough width to organise a meaningful volume of kit — pots, pans, gastronorm containers, and similar — without creating clutter at bench level. At a rated load of 95kg, it has sufficient capacity for general kitchen storage, though operators should bear that in mind when planning heavier loads such as full containers or bulk dry goods.

• Keeps cookware off prep surfaces and within easy reach during service
• Open rod design supports airflow, helping preserve dry-stored ingredients
• Grade 430 stainless steel resists the heat, moisture and cleaning chemicals typical in commercial kitchens
• 1500mm width provides a practical storage run without requiring multiple shorter units
• Wall-mounted fixing keeps the floor clear for cleaning and movement

Installation is wall-fixed, so the load is transferred directly to the wall structure. It is important to ensure the wall substrate is suitable — solid masonry or a properly noggin-backed stud wall is preferable, particularly if the shelf will be loaded towards its rated capacity. The shelf weighs 9kg unloaded, so fitting is manageable for two people. It is worth considering the shelf's position relative to cooking equipment below, and whether wall tiling or cladding needs to be cut around the fixing points.

This shelf suits smaller to medium-sized commercial kitchens — café and restaurant prep areas, school kitchen serveries, and bakery or catering prep rooms where wall storage runs are a practical use of vertical space. Kitchens requiring greater storage depth or a higher load rating may find a deeper or heavier-duty model better suited to their needs.

If you are planning a full wall storage layout or want to check the shelf fits your fixing wall, the team is happy to talk it through before you order.

This 1200mm wall-mounted shelf from Vogue is a straightforward, practical storage solution for commercial kitchens. Constructed from grade 430 stainless steel, it is designed to be fixed directly to a wall, freeing up worktop and floor space while keeping cookware and dry goods within easy reach of the prep area.

The shelf uses a rod construction rather than a solid surface, which serves two practical purposes. Pots, pans, and ladles can be hung between the rods or rested across them, making efficient use of the full shelf depth. The open rod format also allows air to circulate, which makes it a reasonable choice for storing dry goods or ingredients that benefit from ventilation rather than being confined to a closed cupboard.

In a working kitchen environment, the key practical advantages are:

• Wall-mounted installation keeps floor and worktop space clear
• Rod design accommodates hanging cookware as well as rested items
• Stainless steel 430 construction withstands regular cleaning and kitchen humidity
• Rated to 75kg, giving reasonable capacity for pots, pans, and dry store items
• Open rod format promotes air circulation around stored goods

Installation requires secure fixing into a suitable wall structure capable of bearing the loaded weight. It is worth confirming wall substrate and fixing points before installation, particularly in older kitchen builds where walls may be tiled over softer material. The shelf projects 300mm from the wall, so positioning relative to adjacent equipment and passage routes should be considered during planning.

This shelf is well suited to small and medium commercial kitchens, café prep areas, and back-of-house storage runs where a reliable, easy-to-clean overhead shelf is needed. For larger operations or heavier storage loads, a longer or more heavy-duty shelf configuration may be more appropriate.

If you are fitting out a run of wall shelving or are unsure whether this size suits your layout, the team is happy to talk through your requirements.

This is a straightforward, purpose-built shelf designed to provide a secure, hygienic surface for positioning a microwave in a commercial kitchen environment. Constructed from 430-grade stainless steel, it is built to hold the weight demands typical of commercial microwave units and to withstand the heat, moisture, and cleaning chemicals that are part of daily kitchen life.

In practical terms, a dedicated microwave shelf keeps the unit at a safe and ergonomic working height, freeing up valuable counter space and reducing the risk of the microwave being moved or knocked during a busy service. The stainless steel construction cleans down quickly and does not corrode, rust, or harbour bacteria in the way that painted or laminated surfaces can over time.

• Keeps the microwave at a consistent, accessible height for kitchen staff
• Frees up counter and prep space during service
• Stainless steel surface wipes clean easily and resists corrosion
• Suitable for wall-mounting in pass areas, counters, or back-of-house positions
• Rated to support the weight of most commercial microwave units

Before fitting, it is worth confirming the wall construction is suitable for the intended fixing method and that the shelf position allows adequate clearance around the microwave for ventilation. The shelf is intended for indoor commercial use and is not rated for outdoor or refrigerated environments.

This shelf suits smaller kitchens, cafés, and back-of-house areas where a reliable, no-fuss solution is needed. For operations requiring multiple microwave positions or heavier overhead storage, it is worth considering a heavier-duty shelving system instead.

If you are unsure whether this shelf suits your specific microwave unit or wall setup, the team is happy to help you check before you order.

330 x 330mm. For Plate Rack. Sold in Pairs Stainless steel end brackets available for plate racks.