Wall Cupboards

These stainless steel wall cupboards are a practical overhead storage solution for commercial kitchens. Available in five standard widths, they are designed to fit neatly above preparation surfaces, pass-throughs, or service lines where accessible, lockable storage is needed without the swing clearance that hinged doors require. The sliding door configuration makes them particularly well suited to kitchens where space in front of the unit is limited or where staff need to access contents quickly during a busy service.

In a working kitchen environment, the sliding door design earns its place. There is no door swinging into a walkway or catching a passing member of staff, and both doors can be removed entirely without tools for thorough deep cleaning — a practical advantage when hygiene standards require regular inspection of internal surfaces. The internal mid shelf is adjustable in height, which allows operators to configure the interior around the items being stored rather than working around a fixed shelf position.

Key operational features worth noting:

• Sliding doors removable without tools, supporting thorough deep cleaning
• Adjustable internal mid shelf to suit different storage configurations
• Lockable doors for controlled access to stored items
• Rear upstand on the roof edge for sealing against a wall where items are stored on top
• Five width options to suit different wall runs and kitchen layouts

Installation is straightforward wall-mounting, though the specific fixings and wall construction should be assessed before fitting — stainless steel catering cupboards carry meaningful weight when loaded, and the fixing method needs to suit the substrate. The 300mm depth keeps the units from projecting too far over a work surface, though this is worth measuring against your current worktop depth before ordering.

These cupboards are well suited to cafés, school kitchens, care home catering facilities, and similar operations where reliable, hygienic overhead storage is needed day to day. For larger operations or sites requiring deeper storage or additional shelving tiers, it is worth reviewing the wider storage catalogue to confirm the right configuration.

If you are fitting out a new kitchen or replacing existing wall storage, the team are happy to talk through what will work best for your specific layout before you commit to a size.

These stainless steel wall cupboards from Quick Service provide fully enclosed overhead storage with lockable hinged doors. Available in five widths, they are a practical choice for commercial kitchens where secure, hygienic storage above the work line is needed — whether for dry goods, smallwares, or items in regular service use.

The cupboards are fully enclosed with wrap-round side panels and a base shelf, meaning contents are protected from dust and splatter typical in busy kitchen environments. An adjustable internal mid shelf allows the internal layout to be configured around what is being stored, which is more useful in practice than a fixed arrangement. A small rear upstand on the roof allows the unit to seal neatly against a wall surface where items may be placed on top, keeping the installation tidy and reducing the risk of debris falling behind.

Practically, these cupboards suit a wide range of kitchen setups:

• Lockable doors allow restricted access to specific consumables or equipment
• Adjustable mid shelf accommodates varying item heights without modification
• Stainless steel construction is straightforward to wipe down and maintain hygienically
• Fully enclosed design keeps stored items free from airborne grease and dust
• Available across five widths to suit different wall runs and storage requirements

Installation is wall-mounted, so adequate wall structure to take the loaded weight is important — solid masonry or studwork with appropriate fixings is advisable. The 300mm depth keeps the units from projecting too far into the working space, which is worth considering in tighter kitchens. These units are not ventilated, so they are not suited to storing items that require airflow.

Well suited to cafés, pub kitchens, school catering facilities, and similar operations where reliable, hygienic overhead storage is needed without unnecessary complexity. For sites requiring significantly larger storage capacity or deeper units, other configurations within the range may be more appropriate.

If you are unsure which width or combination of units will work best for your wall space and storage needs, our team is happy to talk it through with you.

These Designline stainless steel cupboards are available in two configurations: a standard storage cupboard and a COSHH-compliant version for the safe containment of cleaning chemicals and hazardous substances. Both are built from a box-section frame with a welded base and mid shelf, and include two further adjustable-height removable shelves carried on strengthened support rails — giving operators flexibility to configure internal space around what they actually need to store.

The construction is fully enclosed, with a solid welded roof, full-height back panel, and wrap-round side panels. Side-hinged doors are of inner and outer panel construction, mounted on sturdy cabinet hinges and fitted with a chrome D-handle. This level of enclosure keeps contents protected from the general kitchen environment, which matters both for hygiene and for compliance when storing chemicals.

In practical terms, these cupboards suit a range of undercounter and countertop configurations. The leg height is set to align with common adjacent equipment kick plinth heights, which supports a cleaner, more considered kitchen layout rather than awkward height mismatches between units.

• Adjustable internal shelving to suit different storage needs
• Fully enclosed construction protects contents from kitchen environment
• COSHH version supports compliant chemical storage on-site
• Leg height designed to align with standard counter and adjacent unit heights
• Stainless steel throughout for durability and ease of cleaning

These cupboards are well suited to kitchens of most sizes, from smaller café and pub operations through to larger contract catering environments. For sites with particularly high storage demands or more complex COSHH requirements, it is worth discussing your layout before ordering to make sure the configuration is right.

If you are unsure whether the standard or COSHH version is appropriate for your site, or how these units will integrate with your existing equipment layout, our team is happy to talk it through with you.

The Designline stainless steel base cupboard is a purpose-built storage unit for commercial kitchen environments, designed to sit at standard counter height and integrate cleanly with back-counter runs, wall benches, and centre bench configurations. Construction is based on a welded box-section frame with a fixed base shelf, a full-height rear panel, and wrap-around side panels that enclose the frame for a clean, hygienic finish. An adjustable mid-shelf sits on strengthened support rails, allowing the internal storage space to be configured around whatever you need to store.

In practice, these cupboards work well as under-counter storage for dry goods, smallwares, and equipment that needs to be close to hand during service without cluttering the worktop above. The enclosed construction keeps contents clear of floor debris and makes cleaning around the unit straightforward. Cupboards up to 1,200mm in length are fitted with hinged doors; wider units are supplied with sliding doors, which is the more practical arrangement where access space in front of the unit is limited.

A few practical points worth understanding before ordering:

• Two leg height options are available — a shorter option to align with adjacent hot cupboard or plinth heights, and a taller option to line through with wall and centre benches
• Two worktop profiles are offered — a centre bench top with turned-down edges on both sides, or a wall bench top with a rear upstand
• Wall bench versions have legs inset to the rear to allow for service pipework running behind the unit
• Flanged adjustable feet allow the unit to be levelled and fixed securely to the floor on site

These cupboards are well suited to new kitchen builds and refurbishments where stainless steel fabrication is being used throughout. They are designed to integrate with Designline's wider bench and frame range, so if you are fitting out a full run or need to match existing Designline equipment, it is worth discussing your layout before ordering to ensure leg heights and worktop types align correctly across the installation.

If you are unsure which configuration suits your kitchen layout, our team are happy to talk through the options with you.

These stainless steel wall cupboards from Designline are a practical overhead storage solution for commercial kitchens where worktop and floor space is at a premium. Available in five standard lengths — 600, 900, 1200, 1500, and 1800mm — they can be specified with either hinged or sliding doors to suit the working space around them. Fully enclosed construction with wrap-round side panels, a welded base shelf, and a full-height flush steel back panel gives a clean finish and keeps contents protected from ambient kitchen conditions.

In a working kitchen, the design holds up well under daily use. The adjustable internal mid shelf allows the internal layout to be configured around what is being stored, whether that is dry goods, smallwares, or service items. The rear upstand along the roof panel allows units to be sealed against a wall surface where items may also be stored on top. The concealed screw fixing through the back panel keeps the internal face tidy and snag-free, which matters in a busy kitchen where staff are reaching in and out throughout service.

• Five standard lengths to suit different wall runs and kitchen layouts
• Choice of hinged or sliding doors — sliding suits tighter spaces where door swing is a consideration
• Adjustable mid shelf allows internal configuration to match stored items
• Fully enclosed construction with flush back panel and concealed fixings
• Rear upstand enables clean sealing against the wall surface

These units are appropriate for most commercial kitchen environments — cafés, pub kitchens, school catering facilities, and professional prep kitchens — where hygienic, enclosed overhead storage is needed. For sites requiring a very large number of units or bespoke configurations beyond standard lengths, it is worth discussing your layout in advance to ensure the right combination is specified.

If you are unsure which length or door configuration suits your wall run, or need guidance on combining units into a longer run, the team is happy to talk it through with you before you order.

This Vogue stainless steel wall cupboard is a straightforward, wall-mounted storage unit designed to increase usable storage capacity in commercial kitchens without consuming valuable floor space. It features sliding doors rather than hinged ones, which makes it a practical choice where space around the unit is tight, and a central internal shelf provides a simple way to organise equipment, dry goods, or smaller appliances across two levels.

In a working kitchen environment, wall-mounted storage of this kind earns its place by keeping surfaces clear and frequently used items accessible without cluttering prep areas. The sliding door mechanism is particularly well suited to galley-style kitchens, narrow service corridors, or any area where a swinging door would create an obstruction during busy service periods. Stainless steel construction holds up well under the demands of daily commercial use — resisting moisture, knocks, and the cleaning chemicals routinely used in professional kitchens.

From an operational standpoint, the key advantages are:

• Wall mounting keeps floor space free for equipment and foot traffic
• Sliding doors open without encroaching on adjacent workstations or walkways
• Stainless steel surfaces are straightforward to wipe down and maintain to food-safe hygiene standards
• The central shelf effectively doubles usable internal storage across the cabinet height
• Robust construction suitable for the everyday wear of a commercial kitchen environment

Installation requires secure fixing to a wall capable of bearing the loaded weight of the unit, so it is worth confirming wall construction before ordering — timber stud, masonry, and solid block walls all have different fixing requirements. This is a wall-hung unit, so adequate ceiling clearance and wall height are also worth checking against the overall dimensions before purchase.

This cupboard is well suited to small and medium-sized kitchens — cafés, pub kitchens, school canteens, and similar operations — where additional overhead storage is needed but floor space is at a premium. For larger operations needing significantly greater storage capacity, a heavier-duty or larger-format unit may be a better fit.

If you are unsure whether this unit is the right size or specification for your kitchen layout, the team is happy to talk it through before you commit to an order.

This Vogue wall-mounted cupboard is a straightforward stainless steel storage unit designed to make use of vertical wall space in a commercial kitchen. It features sliding doors and an internal central shelf, providing two usable storage levels for dry goods, small equipment, or serviceware without occupying any floor area.

In a working kitchen, the sliding door design is a practical choice. Unlike hinged doors, slides require no clearance arc in front of the unit, which matters in tight galley kitchens, pass areas, or prep stations where movement is constant. The unit can be accessed cleanly during a busy service without obstructing adjacent staff or equipment.

Constructed in stainless steel throughout, the cupboard is straightforward to wipe down and keep to food-safe hygiene standards. The material holds up well in the warm, humid conditions typical of a commercial kitchen environment.

• Sliding doors allow access in restricted spaces without door swing clearance
• Central shelf divides internal storage into two working levels
• All-stainless construction supports easy cleaning and hygiene compliance
• Wall-mounted design keeps floor space clear for workflow
• Suitable for dry storage, small equipment, or serviceware

Installation requires secure fixing to a wall capable of bearing the loaded weight of the unit. It is worth confirming wall construction and fixing points before ordering, particularly in kitchens with plasterboard or stud partition walls where additional reinforcement may be needed.

This cupboard is well suited to smaller commercial kitchens, café back-of-house areas, and prep rooms where storage is needed at height but floor space is at a premium. For operations with higher storage demands or heavier equipment to house, a larger or heavier-duty wall unit may be more appropriate.

If you are unsure whether this unit is the right fit for your available wall space or storage requirements, our team is happy to talk it through with you.

This Vogue stainless steel wall cupboard is a straightforward overhead storage solution designed for commercial kitchens where floor space is at a premium. Constructed from stainless steel throughout, it mounts to the wall to keep work surfaces and floor areas clear, with a central internal shelf providing two usable storage zones for dry goods, small equipment, or service items.

The sliding door design is a practical consideration in tighter kitchen layouts. Where hinged doors would obstruct walkways or conflict with adjacent equipment, sliding doors allow staff to access the cupboard without interrupting workflow or creating hazards during a busy service. This makes the unit well suited to compact prep areas, back-of-house corridors, and kitchens where every square metre counts.

From an operational standpoint, the stainless steel construction holds up well under the humidity and temperature fluctuations typical of a working kitchen, and it wipes down quickly at the end of service — an important factor where hygiene standards are monitored closely. Key practical advantages include:

• Wall-mounted design keeps floor and counter space free for operational use
• Sliding doors eliminate swing clearance requirements in restricted spaces
• Stainless steel surfaces are straightforward to clean and resistant to moisture
• Central shelf divides the interior into two accessible storage levels
• Suitable for storing dry goods, small appliances, and service equipment

Installation requires secure fixing into appropriate wall structure — masonry or studwork with adequate load-bearing capacity. It is worth confirming the wall construction before ordering, particularly in older or partitioned kitchen environments. For sites needing significantly more overhead storage capacity, larger or multi-unit configurations may be worth considering.

This cupboard is a practical fit for small to medium commercial kitchens, cafés, pub kitchens, and staff catering operations where overhead storage is needed without taking up valuable floor area. If you are fitting out a new kitchen or reorganising an existing one and want guidance on storage layouts, our team is happy to talk it through.

This Vogue wall-mounted cupboard is a straightforward stainless steel storage unit designed to free up floor space in commercial kitchens where room is at a premium. It mounts to the wall, keeping the working area beneath clear, and features sliding doors rather than outward-opening ones — a practical choice in tight galley layouts or anywhere staff movement is dense. An internal central shelf divides the space and allows equipment, dry goods, or small utensils to be organised on two levels.

In a working kitchen, wall storage of this type earns its place by keeping frequently needed items accessible without contributing to floor clutter. The sliding door mechanism holds up well to the kind of repeated, sometimes rough handling that comes with busy service periods, and the all-stainless construction means there are no painted surfaces or particleboard edges to deteriorate in a humid kitchen environment.

From a practical standpoint, the key advantages are:

• Sliding doors open without encroaching into the working aisle
• Stainless steel surfaces wipe clean quickly and meet food-safe hygiene standards
• Wall-mounted installation keeps the floor beneath accessible for cleaning
• Internal shelf provides two usable storage levels within the same footprint
• Robust construction holds up to daily commercial use without surface degradation

Installation requires solid wall fixings appropriate to the wall type and load — masonry fixings into a brick or block wall are straightforward, but a timber-stud or dry-lined partition will need additional support to carry a loaded cabinet safely. Ensure the fixing points are located correctly before installation, as repositioning afterwards is not simple. The unit is suited to kitchens of most sizes; for larger sites needing significantly more wall storage, units with greater width or additional shelving may be worth considering.

This cupboard is a sensible choice for cafés, small restaurant kitchens, staff canteens, and food prep areas where wall space is available and floor space is not. It works particularly well in back-of-house areas alongside preparation benches. Sites with very high-volume storage needs may find a single unit insufficient and should consider whether multiple units or a larger alternative would better serve them.

If you're unsure whether this unit is the right fit for your kitchen layout or fixing situation, we're happy to talk it through before you order.

Corner junctions at high level are one of the most consistently wasted areas in a commercial kitchen. Standard straight wall cupboards cannot meet at an angle without leaving awkward gaps, and in a working kitchen those gaps tend to collect grease and clutter rather than serve any useful purpose. The Quick Service QAWC753LH is an angled corner wall cupboard built specifically to address this. It sits cleanly in the corner junction and is designed to connect with 300mm-deep straight wall cupboards running either side, allowing a continuous, enclosed run of high-level storage across the whole wall.

In practice, this type of unit is used to store dry goods, disposables, small equipment, and operational supplies that need to remain accessible during service without cluttering the work surface below. The lockable door makes it particularly practical in kitchens where multiple staff are working and certain items — cleaning chemicals, allergen-specific ingredients, or higher-value smallwares — need controlled access. The barrel lock supplied with two suited keys is simple to manage across a shift without becoming a logistical burden.

The operational advantages of this unit are straightforward:

• Converts a typically unused corner into genuinely usable enclosed storage
• Connects with matching straight wall cupboards to form a continuous storage run
• Lockable door allows controlled access to restricted or sensitive items
• Adjustable mid-shelf accommodates varying stock heights without wasted vertical space
• Full steel back panel and rear upstand allow clean sealing against the wall surface

The unit is wall-mounted using the brackets supplied. Because the angled corner configuration creates a deeper storage area than a standard straight cupboard of equivalent face width, it can carry a meaningful load — wall fixings should reflect this. Solid masonry is preferable; stud work should be adequately backed. It is worth confirming wall construction before installation rather than after.

This cupboard is well suited to restaurants, café kitchens, pub kitchens, and similar catering operations where a run of high-level wall storage is being planned or extended. It works best as part of a coordinated storage run rather than as a standalone unit. If you are planning a full high-level storage layout and want to make sure the corner configuration works with your existing or planned straight cupboards, the team is happy to talk it through before you order.

Corner junctions at high level are among the most consistently wasted areas in a commercial kitchen. The Quick Service QAWC753H is a fully enclosed, wall-mounted stainless steel cupboard built specifically for angled corner positions, turning that otherwise redundant space into practical, enclosed storage. It is designed to sit alongside standard 300mm deep wall cupboards on either side, so operators can achieve a continuous run of high-level storage across a wall junction that would otherwise leave a gap.

The cupboard is constructed from 430-grade stainless steel throughout, which holds up reliably in the damp, steam-heavy conditions of a working kitchen. Hinged, side-hung doors keep stored items away from splatter and airborne grease during service, and the adjustable mid-shelf allows the internal space to be configured around whatever is being stored — dry goods, consumables, or small equipment. A rear upstand to the roof allows the unit to be properly sealed against the wall surface, which matters in kitchens where hygiene standards are closely monitored. A lockable version is also available where controlled access is needed.

The practical advantages for a kitchen team include:

• Closes the corner gap in a continuous high-level storage run
• Enclosed doors keep stored items hygienic and clear during service
• Adjustable mid-shelf accommodates varying stock heights
• Rear upstand allows a clean, sealed fit against the wall
• Available in a lockable version for restricted-access storage

Installation requires secure wall fixings suited to your wall construction. The unit is supplied with wall-mounting support brackets, and fixing hole dimensions are consistent across the Quick Service wall cupboard range, which simplifies alignment when fitting alongside adjoining units. As with any wall-mounted storage, the wall structure must be capable of bearing the loaded weight — this is worth confirming with your installer in advance, particularly on stud or dry-lined walls.

This cupboard suits kitchens of most sizes where an angled corner junction sits within the high-level storage run. It is especially useful in tighter kitchens where making use of every available metre matters. If you are planning a full run across multiple walls, it is worth mapping out the entire configuration before ordering individual units to ensure consistent depth and height alignment throughout the run.

If you are working through a wall storage layout and want to talk through how this unit fits in, our team are glad to help you get the configuration right before you order.

The Parry WCS is a wall-mounted stainless steel cupboard designed to provide overhead storage in commercial kitchens. It is a straightforward, practical unit — the kind of fabrication that does a specific job reliably without complicating the space around it.

The defining feature is the sliding door arrangement. In many kitchen layouts, a hinged door above a prep run, pass, or tight service corridor creates a real obstruction hazard during busy periods. Sliding doors eliminate that problem entirely, making this unit a sensible choice wherever staff are working directly below or the available clearance in front is limited. Construction is in Type 430 stainless steel, the standard grade used across commercial fabrication, which handles the heat, steam, and repeated cleaning that kitchen environments demand day to day.

Inside, a single shelf is adjustable between two height positions, giving operators a degree of flexibility depending on what is being stored. A lockable version is available on request, which is worth specifying in operations where stock control or restricted access to particular items is a practical consideration.

• Sliding doors eliminate door-swing clearance requirements in confined spaces
• Type 430 stainless steel construction withstands daily kitchen cleaning routines
• Adjustable internal shelf configurable between two positions
• Wall-mounted installation keeps worksurfaces and floor area free
• Lockable variant available for stock security or controlled-access requirements

This cupboard suits small and medium commercial kitchens that need reliable, no-fuss overhead storage. For operations requiring a larger unit or a coordinated run of wall cabinets, there are alternative sizes worth considering. If you have questions about sizing or positioning relative to your existing layout, the team is happy to talk it through before you order.

The Parry WCH is a wall-mounted stainless steel cupboard designed for enclosed, hygienic storage in commercial kitchen environments. The hinged door keeps contents protected from grease, steam, and airborne contamination — a meaningful advantage over open shelving in areas where dust, moisture, or splashing is a regular concern. An internal shelf divides the storage space to allow a degree of organisation for dry goods, small equipment, condiments, or service items.

Wall-mounted cupboards of this type are commonly used in kitchens where worktop space is at a premium. Positioning one above a prep surface or alongside a servery keeps frequently used items within reach without cluttering the work area below. The enclosed format also makes it a practical choice where contents need to remain clean and contained between services.

The main operational advantages are worth noting clearly:

• Enclosed design protects contents from kitchen grease, steam, and splashing
• Hinged door allows quick, one-handed access during busy service periods
• Stainless steel construction wipes down easily and supports hygiene compliance
• Wall-mounted installation keeps floor and worktop areas free for operational use
• Lockable option available where restricted-access storage is required

Installation requires a solid wall capable of supporting the loaded weight of the unit. The correct fixings will depend on wall construction — masonry, stud partitions, and tiled surfaces each require different anchor types, so it is worth confirming this with your installer before the unit goes up. The door swing also needs clear clearance, so consider nearby equipment and foot traffic when selecting a position.

This cupboard is well suited to smaller and medium-sized kitchens needing straightforward enclosed wall storage. Sites with significantly greater storage demands or more complex fabrication requirements may find it worth exploring larger or heavier-duty wall units.

If you are working out the most practical storage layout for your kitchen, we are happy to talk it through before you place an order.