Six Door Lockers

This is a six-door, full-height locker unit from Elite Lockers, finished in black powder-coated steel and fitted with a manual combination lock on each door. The sloping top panel discourages items being left on top of the unit, which is a practical consideration in staff areas where clutter accumulates quickly. Construction is from powder-coated steel throughout, which gives the unit reasonable resistance to the knocks and humidity typical of back-of-house changing and locker rooms.

In day-to-day use, the manual combination lock removes the need for keys or coins, which suits environments where key management is a recurring operational headache. Each of the six compartments provides individual secure storage, making the unit well suited to shift-based workplaces where several staff members need dedicated space. The sloping top is a small detail that pays dividends over time in keeping the area tidy without requiring staff enforcement.

Practical advantages of this configuration include:

• No keys or coins required — manual combination lock on every door
• Sloping top deters storage of bags and boxes on the unit
• Powder-coated steel finish resists surface damage in active staff areas
• Six individual compartments support shift-based team rotas
• Black finish suits darker or more considered staff welfare fitouts

At just over 300mm deep, this unit has a relatively compact footprint, which is worth considering if corridor or changing room space is limited. It is a freestanding unit, so no wall fixings are required, though at 26.5kg it will need two people to position safely. The sloping top adds to the overall height, so check ceiling clearance and door swing before installing in a confined space.

This unit is well suited to hospitality, foodservice, and retail businesses needing secure individual staff storage without the ongoing cost and administration of key-based systems. It works particularly well in sites with regular shift changeovers. If you need to accommodate a larger team in a single bay, or require a shallower or wider configuration, there are other formats worth considering before ordering.

If you are unsure whether this configuration suits your space or team size, we are happy to talk it through before you commit to an order.

This is a six-compartment staff locker from Elite Lockers, finished in green with a sloping top to discourage storage of items on top of the unit. Each compartment is secured by padlock fittings — padlocks are not supplied, allowing operators to specify their own keying arrangements. The unit is constructed with a welded plinth between doors, which improves inter-compartment security by reducing the gap between adjacent doors.

In busy hospitality, catering, and food production environments, staff locker provision is a practical necessity rather than a luxury. This unit is built to withstand the daily demands of a working changing area — the tough epoxy polyester powder coated finish resists knocks, scratches, and the humidity typical of back-of-house spaces. The green finish makes it straightforward to colour-code changing areas or align with site identification systems.

From an operational standpoint, the six-door configuration makes this unit well suited to medium-sized teams where individual secure storage is required without taking up the footprint of multiple separate units. Practical points worth noting:

• Welded plinth between doors improves inter-compartment security
• Sloping top prevents accumulation of items on top of the locker
• Padlock fittings allow operators to manage their own keying arrangements
• Powder coated finish is durable and straightforward to wipe down
• Green finish supports colour-coded zoning across larger sites

At 1,950mm tall and 450mm deep, this is a full-height unit. Floor space and ceiling clearance should both be confirmed before ordering, particularly in older premises where ceiling heights vary. The unit weighs 29.1kg, so two people and appropriate equipment should be planned for during installation. If your team is smaller or larger, the Elite Lockers range includes options from single to eight-door configurations, and alternative depths are available depending on what staff need to store.

This locker suits hospitality operators, contract caterers, food production facilities, and similar environments where reliable, secure individual storage is needed for staff. If you are fitting out a larger site or have specific layout constraints, it is worth having a conversation with us before ordering — we can help you work through the configuration that fits your space and team size.

This six door electronic combination locker from Elite Lockers is a powder coated steel unit designed for staff changing and storage areas in commercial premises, including catering and hospitality environments. Each of the six compartments is secured by an electronic combination lock, removing the need for keys or padlocks and reducing the day-to-day management overhead that comes with traditional keyed lockers.

The sloping top panel discourages items being left on top of the unit, which is a practical consideration in any site where hygiene standards or general tidiness are important. The reinforced door construction and welded plinth between compartments improve inter-compartment security, making it harder for adjacent doors to be forced or manipulated — a worthwhile feature in higher-footfall staff areas.

From an installation standpoint, the unit comes with pre-drilled nesting holes, allowing it to be fixed flush against a wall and lined up neatly in rows if multiple banks are required. This helps make efficient use of available floor space without the unit shifting over time. At 33kg, it is manageable for a two-person installation and does not require specialist fixing beyond standard wall anchoring appropriate to the surface type.

• Electronic combination locks across all six compartments — no keys to manage or replace
• Reinforced doors with welded plinths between compartments for improved inter-compartment security
• Sloping top to prevent storage accumulation and maintain tidy, hygienic staff areas
• Pre-drilled nesting holes for wall-fixing and flush row alignment
• Powder coated steel construction in green, suited to a range of staff facility environments

This unit is well suited to smaller catering operations, hospitality venues, and food production sites where a compact six-compartment solution meets the staffing requirement. For larger teams or sites needing more compartments per unit, higher-capacity locker configurations are available in the range.

If you are unsure whether a six door unit is the right fit for your site — or you are planning a larger installation across multiple banks — we are happy to talk through the options before you commit to an order.

This six-door electronic combination locker from Elite Lockers is a steel-bodied, powder coated unit designed for staff changing and storage areas in commercial environments. Each of the six individual compartments is secured by an electronic combination lock, removing the need for keys or padlocks and reducing the day-to-day management burden on facilities and HR teams.

The construction is notably solid for its class. Doors are reinforced and the plinth between compartments is welded rather than pressed, which meaningfully improves inter-compartment security — a practical consideration in shared staff areas where personal belongings are stored during service. The powder coated steel finish in green is durable enough to withstand the routine knocks and cleaning cycles typical of a busy back-of-house corridor or changing room.

A few practical points worth noting for installation:

• Pre-drilled nesting holes allow the unit to be fixed flush to a wall, helping to maximise floor space in tighter areas
• Units can be arranged in rows, making it straightforward to expand locker provision as staffing grows
• No electrical supply is required beyond the electronic locks themselves — check battery access and replacement requirements before installation
• At 32kg, the unit will need two people to position safely; ensure the floor surface and fixing wall are suitable for the load

This locker configuration suits kitchens, hospitality venues, and food production sites that need to provide secure individual storage for a small team. Six doors makes it a practical choice for smaller brigades or as a supplementary unit alongside a larger bank. For sites with significantly higher staffing numbers, a multi-bay configuration or higher-capacity unit would be worth considering.

If you're unsure how many doors or bays your site needs, or whether this unit suits your specific installation space, the team is happy to talk it through before you order.

This six-door locker unit from Elite provides secure, individual personal storage across a range of staff and public-facing environments. Each of the six compartments is secured behind a reinforced door fitted with a coin return mechanism compatible with both old and new £1 coins — removing the need for key management whilst still giving users confidence their belongings are secure during a shift.

The locker is constructed from powder-coated steel and carries an antibacterial coating that is resistant to MRSA and E. coli. That makes it a practical choice not just for general staff areas, but for hygiene-critical environments such as food production facilities, hospital catering operations, or any site where cross-contamination risk needs to be managed at every level. The coating is applied to the steel frame itself, so it remains effective throughout normal working life rather than wearing off like a surface-applied treatment.

The sloping top is a considered design detail rather than an aesthetic one. It prevents bags, boxes, and general clutter from accumulating on top of the unit — a common issue in busy changing areas — and reduces the horizontal surface area where dust and grime can collect, which matters in environments with regular hygiene inspections.

• Coin return locking on every door — no keys to manage or replace
• Antibacterial coating suitable for hygiene-critical environments
• Sloping top discourages clutter and simplifies cleaning routines
• Powder-coated steel construction built for long-term, heavy-use settings
• Green finish available where colour-coding of staff areas is required

At 33kg this is a solid, stable unit and will need two people to position safely. The relatively narrow individual compartment width means it suits sites where staff need secure storage for personal items rather than full-length garment hanging. For sites with larger storage requirements per user, a taller or wider format locker may be worth considering.

If you are fitting out a new facility or replacing ageing locker banks and want to talk through quantities, colour options, or configurations, the team is happy to help you work out what suits the space.

This six-door locker from Elite provides individual secure storage compartments for staff personal belongings, fitted with a coin return locking mechanism that accepts both old and new £1 coins. The unit is constructed from powder coated steel and finished in green, making it a practical choice where colour-coded zoning or a specific aesthetic is required.

In busy catering and hospitality environments, staff lockers take a great deal of daily use. This unit is built to handle that consistently — the reinforced doors and solid steel frame hold up well under the kind of repeated opening, closing, and occasional mishandling that comes with high-turnover changing areas. The antibacterial coating provides resistance to MRSA and E. coli, which makes these lockers a considered choice for food production sites, healthcare catering operations, and any environment where hygiene standards are formally maintained.

From a practical standpoint, the coin return mechanism keeps things straightforward for staff — no padlocks to manage or replace, and no cost to the employee. Key operational advantages include:

• Antibacterial coating suitable for hygiene-critical environments
• Coin return lock compatible with current and previous £1 coin
• Six individual compartments within a single upright unit
• Powder coated steel construction resistant to knocks and corrosion
• Flat top design allows units to be stacked or placed side by side neatly

At 1800mm tall and 300mm wide, this is a slim-profile unit well suited to staff corridors, changing rooms, and back-of-house areas where space is limited. The 32kg weight means installation is manageable without specialist lifting equipment, though securing the unit to a wall for stability is advisable, particularly where it will be used frequently throughout the day. The 450mm depth is modest, so it is worth considering what staff will need to store — longer garments may not hang freely in a compartment of this depth.

This locker is well suited to catering operations, food production facilities, healthcare environments, and hospitality venues where hygiene compliance and reliable daily use are both priorities. For sites requiring more compartments per unit, or where security requirements are more demanding, alternative configurations are available within the range.

If you are fitting out a changing area and want to talk through quantities, layout, or colour options before ordering, we are happy to help you work it out.

This six door combination locker from Elite Lockers is a powder coated steel storage unit designed for staff changing areas, back-of-house corridors, and ancillary rooms in commercial and hospitality environments. Each of the six compartments is secured by a manual combination lock, removing the need for keys and the day-to-day management that comes with them. The sloping top prevents items being stored on top of the unit, which is a practical consideration in any area where hygiene standards or tidy presentation matter.

In busy hospitality and catering operations, locker banks need to hold up to daily use by multiple staff across multiple shifts. The reinforced door construction and welded plinth between compartments are practical choices for high-footfall staff areas — they add inter-compartment rigidity and reduce the likelihood of one door's use affecting the structure of adjacent compartments over time. The powder coated steel finish is durable and straightforward to wipe down.

From an installation standpoint, the unit arrives as a self-contained locker bank. Pre-drilled nesting holes allow it to be fixed flush to a wall, which is worth doing in areas with limited space or where the unit might be subject to movement. Multiple units can be positioned in rows and fixed together for a neat, stable run. At 33kg, it is manageable for a two-person installation without specialist equipment, though site access and floor surface should be considered before delivery is booked.

This locker is well suited to catering teams, front-of-house staff rooms, leisure facilities, and similar environments where a moderate number of personal storage spaces are needed. The green finish and combination lock mechanism make it a practical choice where key management is a recurring admin overhead. Sites needing a greater number of compartments or a wider locker profile may find a larger-format unit better suited to their space.

If you are fitting out a staff area and want to discuss layout, quantities, or colour options before ordering, the team is happy to help you work through the details.

This six-door locker from Elite Lockers is a manual combination lock unit constructed from powder coated steel. Each of the six compartments is secured independently by a built-in combination lock, removing the need for padlocks or key management. The flat top design keeps the unit clean and practical in tight spaces, and the green powder coat finish offers reasonable resistance to the knocks and moisture typical of back-of-house environments.

In busy staff areas, the reinforced door construction and welded plinth between compartments help maintain inter-compartment security — a practical detail that matters when multiple staff share a single locker bank. The unit is pre-drilled with nesting holes, allowing it to be fixed flush to a wall to make the most of limited space, and multiple units can be lined up in rows without gaps where debris accumulates.

Practical points worth considering before ordering:

• Combination locks eliminate key replacement costs and lost-key issues
• Welded plinth between doors strengthens the frame and improves compartment separation
• Pre-drilled nesting holes allow wall-fixing or row configuration
• Powder coated steel finish suits most back-of-house and changing room environments
• Flat top keeps the unit usable in low-ceiling or shelf-adjacent installations

At 1800mm high with a shallow 300mm depth, this unit is well suited to corridors, changing rooms, and staff areas where floor space is limited. It is worth noting that the 300mm compartment width is on the narrower side — suitable for personal items and uniform storage, but not for bulky outdoor clothing or large bags. If your team carries more substantial kit, a wider or deeper locker configuration may serve better.

This unit is a practical choice for cafés, restaurants, hotels, care homes, and similar sites needing straightforward, key-free staff locker provision without ongoing key management. For larger teams or higher-security requirements, wider or taller configurations are available across the range.

If you are fitting out a staff area and want to talk through the right locker configuration for your space and team size, we are happy to help.

This is a six-compartment staff locker from Elite Lockers, finished in red with a sloping top to prevent items being stored on the unit and to aid cleaning. Each compartment is secured by padlock fitting — padlocks are not supplied — and the welded plinth between doors adds a practical layer of inter-compartment security that is often absent on budget locker ranges.

The tough epoxy polyester powder coated paint finish is well suited to the demanding conditions of back-of-house environments, where lockers are regularly knocked, scuffed, and exposed to humidity from nearby kitchens and wash areas. The red finish also aids easy identification in larger changing areas where different teams or departments use separate units.

Practical considerations for operators include:

• Sloping top discourages storage on top of the unit and keeps the area tidy
• Welded plinth between doors improves security between individual compartments
• Powder coated finish resists corrosion and cleans down easily
• Padlock fitting allows operators to choose their own lock system
• Six-door configuration suits small to medium teams sharing a changing area

At 1,950mm tall and 29.1kg, this unit requires two people for safe installation and positioning. The 300mm width means it has a relatively compact footprint, though operators with larger teams or sites requiring more compartments per unit may find it worth considering an eight-door configuration instead.

This locker suits hospitality, catering, and food production businesses needing a reliable, presentable changing room solution for small teams. It is particularly practical where colour coding by department or role is used. For larger sites or higher compartment counts, wider multi-door configurations are available within the range.

If you are fitting out a changing area and need advice on locker quantities, configuration, or finish options, the team is happy to talk it through before you order.

This is a six-compartment steel padlock locker from Elite Lockers, finished in red with a tough epoxy polyester powder coated paint finish. Each compartment is secured by a padlock hasp rather than a built-in lock, allowing operators to issue or replace their own padlocks as needed. The locker is built on a welded plinth, and the construction includes reinforced doors and welded inter-compartment sections to limit access between adjacent bays.

In commercial and hospitality environments, staff lockers take considerable daily use — doors opened and closed repeatedly across multiple shifts, often in changing rooms, corridors, or back-of-house areas with limited space. The steel construction and powder coated finish on this unit are suited to that kind of sustained, routine use. The welded plinth keeps the base structure rigid and makes the unit straightforward to position on solid flooring without additional fixings in most cases.

Practical points worth considering before ordering:

• Padlock hasp design means padlocks are not supplied — operators source their own
• Welded plinth provides a stable base but means no adjustable levelling feet
• Epoxy polyester powder coat offers good resistance to knocks and cleaning chemicals
• Welded inter-compartment section improves security between adjacent users
• Red finish is available as a custom colour option — lead times may differ from standard finishes

At 1800mm tall with a relatively narrow footprint, this locker is a practical fit for changing rooms, corridors, and staff areas where space is limited. It suits teams of up to six where individual secure storage is needed. For larger teams or higher-security requirements, a unit with integrated cam locks or a greater number of doors may be more appropriate.

If you are fitting out a staff area and are unsure whether this configuration suits your team size or space, we are happy to talk it through before you place an order.

This six-door locker from Elite provides secure, individually accessed personal storage in a freestanding unit finished in red powder-coated steel. Each door is secured by an electronic combination lock, removing the need for keys or padlocks and allowing staff to set their own access code. The sloping top panel discourages items being left on top of the unit, which is a practical consideration in environments where hygiene standards are closely managed.

The steel construction carries an anti-bacterial treatment that has been tested against MRSA and E-coli, making this locker well suited to food production areas, catering kitchens, and other hygiene-critical workplaces where standard lockers may not be appropriate. Pre-drilled fixing holes at the rear allow the unit to be secured to a wall, which is advisable in high-traffic corridors or where the unit will be installed unsupported.

From a practical standpoint, this locker offers several day-to-day advantages for site managers and staff alike:

• Keyless electronic combination locks reduce the administrative burden of lost keys
• Anti-bacterial steel treatment supports compliance in food handling environments
• Sloping top prevents unauthorised storage and reduces dust accumulation
• Wall-fixable design adds stability in busy changing or locker areas
• Red finish aids identification where colour-coded zoning is in use

The unit is a tall, narrow configuration at 300mm wide, which suits installations where wall space is limited. Bear in mind that at 33kg the locker will require two people to position and fix safely. It is designed for indoor use and is not rated for damp or outdoor environments.

This locker is a practical choice for catering and food production operations needing hygienic, keyless staff storage in a compact footprint. For larger teams or higher-volume storage requirements, wider or higher-capacity locker configurations are available within the range.

If you are unsure which locker configuration best fits your site layout or compliance requirements, we are happy to talk it through before you order.

This six door locker from Elite provides individual secure storage for up to six users within a single unit. Each compartment is secured by an electronic combination lock, removing the need for keys or padlocks and reducing the day-to-day admin that comes with traditional keyed systems. The locker is constructed from powder coated steel with an antibacterial treatment that is resistant to MRSA and E-coli, making it a practical choice for environments where hygiene standards are a priority.

In busy catering and hospitality settings, staff changing and storage areas can be overlooked when planning a facility, but they directly affect team welfare and compliance. A locker bank that is straightforward to use, clean, and maintain helps keep back-of-house areas tidy and reduces the risk of personal items entering food preparation zones. The electronic locking mechanism means lost key issues are eliminated, and access codes can be reset as staff turnover requires.

• Electronic combination lock — no keys to manage or replace
• Antibacterial steel treatment resistant to MRSA and E-coli
• Pre-drilled holes at the rear for straightforward wall fixing
• Powder coated steel finish in red — durable and easy to wipe down
• Six individual compartments within a single footprint

The unit requires a solid, level floor and should be wall-fixed using the pre-drilled mounting points at the rear — this is particularly important in high-traffic areas. At 32kg the locker is manageable for two people to position, but access and doorway widths should be considered before delivery. The red powder coat finish is a specific colour option; if a neutral or alternative colour is needed, other finishes are available in the range.

This locker suits catering operations, hospitality venues, leisure facilities, and healthcare environments where hygiene-rated storage and reliable daily use are priorities. For larger teams or higher-volume sites, wider or taller configurations with more doors may be more appropriate. If you are fitting out a staff area and want to discuss the right layout or quantity for your team size, we are happy to help before you order.

This is a six-compartment staff locker from Elite Lockers, finished in red with a sloping top and fitted with camlock closures throughout. The sloping top discourages items being left on top of the unit — a practical consideration in busy changing areas where clutter can become a hygiene and housekeeping issue. The welded plinth between each door column adds a meaningful layer of inter-compartment security, reducing the risk of access between adjacent bays.

The powder-coated epoxy polyester finish is hard-wearing and well suited to the damp, humid conditions typical of staff changing rooms, locker rooms, and back-of-house corridors. The finish resists chipping and surface corrosion better than paint-only alternatives, which matters in environments where lockers take regular knocks from bags, trolleys, and general day-to-day use.

Practical points worth noting for this configuration:

• Camlock fittings on all six doors — employees typically supply their own key
• Welded plinth between door columns improves security between compartments
• Sloping top prevents items accumulating on the unit
• Epoxy polyester powder coat finish handles humid back-of-house conditions well
• Red finish aids colour-coded zoning in larger changing facilities

At just under two metres tall, this unit requires reasonable ceiling clearance and a firm, level floor. At 29.1kg it can be manoeuvred by two people, though positioning should be planned before installation given the height. No electrical or water connections are required.

This locker suits mid-sized catering operations, hotels, leisure facilities, and food production sites needing a compact but capable six-compartment solution. Where a larger team requires more storage capacity, wider or taller configurations may be more appropriate — and for smaller teams, single- or double-door options are available in the same range.

If you are fitting out a changing area and need guidance on layout, compartment count, or colour coding across a larger installation, the team is happy to help you work through the options before you order.

This six-door locker from Elite is a powder-coated steel storage unit designed for staff areas, changing rooms, and back-of-house spaces where personal storage needs to be secure, hygienic, and easy to manage. Each of the six compartments operates on a coin return mechanism compatible with the current British £1 coin, meaning staff can secure their belongings without needing keys to be issued or managed by supervisors.

The antibacterial-treated steel construction resists MRSA and E. coli, which makes this unit a practical choice for food production environments, healthcare-adjacent catering operations, and any site where hygiene standards are formally monitored. The sloping top is a deliberate design decision — it prevents items being left on top of the unit, which is a common hygiene audit failure point in kitchens and food preparation areas.

From an operational standpoint, this locker suits facilities where staff turnover is high or shift patterns vary, since the coin return system removes the administrative burden of key allocation entirely. Pre-drilled fixing holes at the rear allow the unit to be secured to a wall, which is an installation requirement in many commercial premises for both safety and insurance compliance.

• Coin return mechanism removes the need for key management across shifts
• Antibacterial steel finish supports compliance in hygiene-critical environments
• Sloping top prevents surface accumulation and supports audit readiness
• Wall-fixing holes allow secure installation without additional fabrication
• Red powder-coat finish aids identification in multi-bank locker layouts

This unit is well suited to catering operations, food manufacturing sites, healthcare facilities, and leisure venues where a compact six-door bank is sufficient. For larger teams or higher-traffic changing areas, a wider or taller configuration may be more appropriate.

If you are specifying lockers for a new build or refurbishment and are unsure about quantity, layout, or fixing requirements, the team is happy to work through the details with you before you place an order.

This six-door locker from Elite Lockers provides individual, lockable personal storage across six separate compartments within a single tall unit. Each door operates on a coin return mechanism compatible with the current British £1 coin, meaning users recover their deposit when they vacate the locker — a practical arrangement for shared or public-access staff areas where locker availability and accountability matter.

The unit is constructed from powder coated steel with an anti-bacterial treatment that provides resistance to MRSA and E-coli. This makes it a sensible choice for environments where hygiene standards are closely managed — food production facilities, healthcare-adjacent catering operations, and commercial kitchens with high staff turnover. The red powder coat finish is hardwearing and helps the units stand out clearly in busy back-of-house areas.

From a practical standpoint, the six-door configuration keeps the overall footprint narrow while providing storage for multiple staff members simultaneously. Key operational points include:

• Coin return mechanism works with the current British £1 coin
• Anti-bacterial steel treatment resists MRSA and E-coli
• Pre-drilled rear fixing holes allow wall-mounting for added stability
• Powder coated finish is resistant to everyday wear in staff areas
• Narrow-profile design suits corridors and compact changing areas

Installation is straightforward. Pre-drilled holes at the rear of the unit allow the locker to be secured directly to a wall, which is advisable in high-traffic areas or anywhere the unit may be subject to movement. At 32kg, the unit can be repositioned by two people if required. No electrical or plumbing connections are needed.

This locker is well suited to commercial catering operations, food production sites, leisure facilities, and any setting that requires hygienic, accountable personal storage for staff. For larger teams or higher-volume sites requiring more doors per run, wider multi-bay configurations may be more appropriate.

If you are specifying lockers for a new or refurbished staff area and want to discuss quantities, layout, or colour options, the team is happy to help.

This is a six-door staff locker unit from Elite, manufactured in powder-coated steel and finished in red. Each door is secured by an individual manual combination lock, removing the need for keys or padlocks. The sloping top is a practical detail that prevents items being left or stored on top of the unit — a common requirement in hygiene-managed environments. The antibacterial-treated steel construction is resistant to MRSA and E. coli, which makes this unit appropriate for food production sites, healthcare-adjacent facilities, and other settings where hygiene standards are closely managed.

In day-to-day use, the manual combination mechanism means staff are not reliant on issued keys, which reduces the administrative burden on supervisors and removes the recurring cost of replacement locks or padlocks when staff turn over. Pre-drilled fixing holes at the rear of the unit allow the locker to be secured to a wall, which is worth doing in any busy changing area where units might otherwise be knocked or shifted during peak changeover periods.

Practical advantages worth noting for operators:

• No keys to issue, track, or replace when staff leave
• Antibacterial steel treatment suitable for hygiene-critical environments
• Sloping top discourages storage of unauthorised items on the unit
• Wall-fixing holes included for added stability and safety compliance
• Red finish aids identification in multi-bank locker installations

At 1,950mm tall, this is a full-height unit that makes use of vertical space. The 300mm depth is relatively compact, which suits tighter changing areas where floor space is limited. At 33kg, installation will require two people. This unit is a single-width, six-door configuration — if your site requires higher-capacity storage across a larger workforce, wider or multi-bay configurations may be a more practical solution.

This locker is well suited to catering and hospitality operations, food production environments, healthcare settings, and any workplace where personal storage needs to meet a basic hygiene standard. It is a sensible choice for sites with moderate staff numbers where a clean, colour-coded changing area is a practical or regulatory requirement.

If you are fitting out a staff area and are unsure how many doors or bays you need, or whether this configuration fits your layout, we are happy to talk it through before you order.

This six-door locker unit from Elite provides individual secure storage compartments, each operated by a manual combination lock that removes the need for keys or padlocks. Constructed from powder-coated steel with an antibacterial treatment, it is designed to hold up in environments where hygiene standards are a priority — including catering, food production, and healthcare-adjacent staff areas.

In practical terms, six separate compartments in a single freestanding column means multiple staff members can secure personal belongings within a compact footprint. The manual combination mechanism is straightforward to use and eliminates the ongoing cost and admin of issuing and replacing keys. The antibacterial steel treatment is resistant to MRSA and E. coli, which matters in kitchens and food preparation environments where cross-contamination risks are taken seriously.

• Manual combination locks — no keys to issue, track, or replace
• Antibacterial steel construction resistant to MRSA and E. coli
• Pre-drilled rear mounting points for secure wall fixing
• Powder-coated finish in red — practical for colour-coded zoning
• Compact column format suits space-limited changing areas

At 1800mm tall with a 300mm square footprint per column, this unit works well in narrow changing rooms or corridors. It can be wall-fixed via the pre-drilled holes at the rear, which is advisable wherever the unit will be accessed regularly or located in a high-traffic area. At 32kg, installation is manageable but a two-person fit is sensible. The red finish lends itself to colour-coded storage systems, useful where operators need to distinguish departments or access levels visually.

This locker is well suited to catering operations, food production sites, schools, and leisure facilities where a compact, hygienic personal storage solution is needed for staff. For larger teams requiring more doors in a single run, wider multi-column configurations are available. If you are fitting out a full changing area and want to think through layout, capacity, or colour-coding, we are happy to talk it through before you order.

This is a six-compartment steel locker from Elite Lockers, finished in red epoxy polyester powder coat and fitted with individual camlocks on each door. Each compartment provides personal storage for one member of staff, making this configuration a practical choice where space is available and a reasonable number of users need to be accommodated within a single unit.

The construction reflects the demands of busy staff areas — the doors are reinforced, and a welded plinth sits between each door to reduce the risk of access between adjacent compartments. This is a considered detail rather than a cosmetic one, and it adds a meaningful layer of security compared with basic locker designs. The powder coat finish is robust enough to handle the knocks and scuffs typical in changing rooms and back-of-house corridors, and the red finish makes the unit easy to identify in colour-coded locker schemes.

From a practical standpoint, this locker suits a range of hospitality and catering environments:

• Welded inter-door plinth improves compartment-to-compartment security
• Reinforced doors reduce wear from repeated daily use
• Camlock mechanism is straightforward to operate and manage
• Epoxy polyester powder coat finish is durable and easy to wipe down
• Red finish supports colour-coded storage systems

Installation is straightforward — the unit is free-standing and does not require fixings to be effective, though anchoring to a wall is worth considering in higher-traffic areas. At 1800mm tall, it will fit within a standard ceiling height, but it is worth confirming access routes and door widths before delivery, given the overall size and weight of the unit.

This locker is well suited to restaurants, hotels, care homes, and catering operations that need reliable, secure staff storage without unnecessary complexity. If you need to accommodate a larger workforce or prefer a different compartment count, other configurations are available across the range.

If you are unsure which configuration best fits your space or staff numbers, we are happy to talk it through before you place an order.

This is a six-compartment staff locker from Elite Lockers, finished in blue with a sloping top to prevent items being stored on top of the unit. Each compartment is secured by padlock fittings — padlocks are not supplied, which allows operators to choose their own keying system. The sloping top variant is a practical choice anywhere that horizontal surfaces tend to accumulate clutter, and is commonly specified where hygiene standards or housekeeping policies require clear tops.

The locker is constructed with a tough epoxy polyester powder coated paint finish, which holds up well to the day-to-day knocks and damp conditions typical of staff changing areas and back-of-house corridors. The welded plinth between doors improves inter-compartment security, reducing the risk of adjacent compartments being leveraged open. At just under 30kg, the unit is manageable to position but solid enough to remain stable in use.

Practical features worth noting:

• Sloping top discourages storage and keeps the area tidy
• Welded plinth between doors strengthens inter-compartment security
• Padlock fittings allow flexible keying arrangements to suit your site
• Powder coated finish resists corrosion in damp back-of-house environments
• Six compartments in a single unit reduces the number of separate lockers to manage

The unit measures 1950mm high and 450mm deep, so confirm your available floor space and ceiling clearance before ordering. It is best positioned against a flat wall and should be anchored if there is any risk of the unit being pulled forward. This configuration suits medium-sized teams; for larger workforces or sites with higher storage requirements per person, wider or deeper locker configurations may be more appropriate.

This locker is well suited to restaurant and hotel back-of-house areas, catering college changing facilities, and similar staff welfare spaces where a tidy, secure, and durable solution is needed without unnecessary complexity.

If you are fitting out a staff area and want to discuss locker quantities, layout, or colour options before committing, the team is happy to help you work through the requirements.

This six-door padlock locker from Elite Lockers is a straightforward, robust steel storage unit designed for staff changing areas, back-of-house corridors, and similar workplace environments. Each of the six compartments is secured by a padlock fitting rather than a built-in lock, meaning operators supply their own padlocks and can replace them as staffing changes — a practical arrangement in high-turnover environments. The unit is finished in a tough epoxy polyester powder coated paint in blue, which provides reasonable resistance to knocks, moisture, and the general wear of a busy back-of-house area.

The construction reflects what you would expect from a commercial locker at this level. The doors are reinforced and the plinth between compartments is welded rather than clipped, which adds to inter-compartment security and reduces the flex that cheaper units can develop over time. At 27kg the unit has a solid feel without being unwieldy to position during installation.

Practical advantages for operators include:

• No built-in lock mechanism to fail or replace — padlocks are operator-supplied
• Welded plinth improves inter-compartment security over standard designs
• Powder coated finish resists everyday knocks and surface moisture
• Six individual compartments suit small to medium staff teams
• Flat top design allows units to be stacked or have items stored on top

The six-door configuration suits smaller teams or situations where staff share a locker room with limited floor space. For larger workforces, multiple units are typically installed side by side. The powder coat finish is durable in dry or semi-dry environments, though it is not designed for wet rooms or areas with direct water exposure.

If you are fitting out a changing room or staff area and want to confirm the right configuration or quantity for your headcount, the team are happy to help you work through the options.

This six door locker unit from Elite Lockers provides secure, individual personal storage for staff in commercial kitchens, hospitality venues, and food production environments. Each of the six compartments is secured by an electronic combination lock, removing the need for keys or coins to be managed by supervisors. The sloping top is a practical design detail that prevents items being stored on top of the unit — a useful consideration in environments where hygiene and clear access routes matter.

The unit is constructed from powder coated steel and treated with an antibacterial coating that has been tested against MRSA and E-coli. In catering and food service environments where hygiene standards are closely monitored, this makes it a more appropriate choice than untreated alternatives. The doors are reinforced, which helps the lockers hold up in busy back-of-house areas where equipment sees daily heavy use.

From an operational standpoint, the key practical advantages are:

• Electronic combination locking — no keys to cut, replace, or chase after a shift change
• Antibacterial surface coating tested against common pathogens
• Reinforced doors for durability in high-traffic staff areas
• Sloping top prevents accumulation of items above the unit
• Pre-drilled rear fixing points allow wall anchoring where required

The unit is free-standing, so no special installation is required — it can be positioned in a changing room, corridor, or staff area and moved if the layout changes. At 33kg, it is manageable for two people to position without specialist equipment. Pre-drilled holes to the rear allow the unit to be fixed to a wall for added stability where site rules or risk assessments require it. The footprint is relatively compact given it offers six individual compartments, which makes it practical for smaller staff areas.

This locker unit is well suited to catering businesses, hospitality venues, contract caterers, and food production sites where a small team needs secure personal storage. It works for sites with up to six staff requiring dedicated compartments per shift. Operations with larger teams, or where lockers need to serve multiple departments, may benefit from a higher-capacity bank of units or a different configuration.

If you are unsure whether this configuration suits your staff area layout or headcount, we are happy to talk it through before you place an order.

This six door locker unit from Elite Lockers provides secure, individually lockable personal storage for staff in commercial kitchens, hospitality venues, and similar back-of-house environments. Each of the six compartments is secured by an electronic combination lock, removing the need for keys or coins and reducing the day-to-day admin that comes with managing traditional locker keys across a team.

The unit is constructed from powder coated steel, which gives it the structural robustness expected in a busy staff area. The coating is treated with an anti-bacterial agent with resistance to MRSA and E-coli, which is a practical consideration in food service environments where hygiene standards extend beyond the kitchen itself. The blue finish is a custom colour option, useful where operators want to colour-code storage areas or match an existing scheme.

In practical terms, the electronic combination mechanism means staff can set their own codes, access is quick during shift changes, and there are no lost keys to manage. The flat-top design keeps the top surface clear and avoids dust accumulation. Key operational advantages include:

• Electronic combination locks — no keys to manage or replace
• Anti-bacterial coating resistant to MRSA and E-coli
• Pre-drilled rear nesting holes for optional wall fixing
• Free-standing design with the option to secure in place
• Flat top surface, straightforward to keep clean

At 1800mm tall, the unit is a standard full-height locker configuration and will suit most staff room or changing area layouts. Weighing 32kg, it can be positioned by two people without specialist equipment, though wall fixing is advisable in higher-traffic areas. The 300mm width per unit means six compartments are accommodated in a relatively compact footprint, which suits kitchens where back-of-house space is limited.

This unit is well suited to smaller teams or satellite sites where a single six door column provides sufficient capacity. For larger brigades or venues with higher staff volumes, a wider bank of units or a higher door-count configuration may be more appropriate.

If you are fitting out a staff area and are unsure whether this configuration suits your team size or space, our team is happy to talk it through with you.

This six-door locker from Elite Lockers is a freestanding, multi-compartment storage unit designed for staff changing rooms and back-of-house areas in commercial premises. Each of the six individual compartments is secured by a camlock fitting, providing a step up in security compared to standard padlock hasps. The sloping top prevents items being stored on top of the unit, which helps maintain a tidier environment and discourages unauthorised use of the surface.

The locker is constructed with a tough epoxy polyester powder-coated paint finish in blue, which offers reasonable resistance to the knocks and humidity typical of busy changing areas. The welded plinth between doors adds inter-compartment rigidity and reduces the risk of adjacent compartments being compromised if one door is forced. This kind of detail matters in environments where the units are in constant daily use across large teams.

Practical advantages of this configuration include:

• Six separate lockable compartments in a single footprint, reducing the number of units required
• Camlock fittings offer more secure closure than open padlock loops
• Sloping top discourages surface clutter and is easier to keep clean
• Powder-coated finish resists corrosion and is straightforward to wipe down
• Welded plinth construction improves overall structural integrity

At 450mm deep, this unit offers a practical storage volume for coats, bags, and personal items without projecting excessively into a changing room. The 1950mm height makes it a full-height locker, suitable for hanging garments. It is worth confirming door clearance and ceiling height before installation, particularly in older or lower-ceilinged buildings. The unit arrives in blue as standard; if a different colour is needed, other options are available in the range.

This locker is well suited to catering operations, hospitality venues, food production sites, and similar environments requiring compliant staff storage. For sites with larger teams or where security requirements are higher, it is worth considering a higher-capacity configuration before committing to a quantity.

If you are fitting out a changing area and want to talk through quantities, layout, or colour options, we are happy to help you work it out before you order.

This six-door locker unit from Elite provides individual secured compartments for staff or visitor use, each operated by a coin return mechanism compatible with the current £1 coin. When a coin is inserted, the door locks; the user retrieves it on exit. No keys to manage, no replacement costs for lost padlocks — it operates on a straightforward deposit-and-return principle that suits high-turnover environments well.

The unit is constructed from powder-coated steel with an anti-bacterial surface treatment tested against MRSA and E-coli. That matters in catering and hospitality settings where hygiene standards are monitored and the changing area is considered part of the overall compliance picture. The sloping top prevents items being left or stacked on top of the unit, which also makes routine cleaning of that surface straightforward.

From an operational standpoint, the design addresses several common practical concerns:

• Coin return mechanism eliminates key management and reduces staff overhead
• Anti-bacterial coating supports hygiene compliance in food-sector environments
• Sloping top discourages clutter and simplifies daily cleaning routines
• Pre-drilled fixing points allow wall-anchoring if required by risk assessment
• Free-standing installation keeps deployment flexible across different room layouts

At 33kg, the unit is manageable to position during installation but should be handled by two people. It is free-standing, though the pre-drilled rear holes allow it to be secured to a wall where a risk assessment or building requirement calls for it. The footprint is relatively compact, making it practical for smaller changing rooms or corridors where space is limited.

This locker bank is well suited to catering businesses, hospitality venues, leisure facilities, and any workplace where staff need secure short-term personal storage without the administrative burden of key allocation. For larger sites requiring more doors per run or heavier-gauge construction, alternative configurations are available in the range.

If you are unsure whether this unit fits your space or compliance requirements, the team is happy to talk it through before you order.

This six-door coin return locker from Elite Lockers provides a practical, self-managing personal storage solution for staff changing rooms, front-of-house cloakrooms, and similar high-footfall areas. Each of the six compartments is secured using a coin return mechanism compatible with the current £1 coin, meaning no keys to manage and no ongoing cost to the operator once the unit is installed. Users deposit the coin to lock, and retrieve it when they leave — a system that works well in environments with high staff turnover or shared shift patterns.

The locker is constructed from powder coated steel with a robust frame that holds up well under the daily wear typical of busy catering and hospitality operations. The blue finish is applied with an anti-bacterial coating that carries resistance to MRSA and E-coli — a consideration worth noting in food-related environments where hygiene standards are closely monitored. The flat top design also allows units to be stacked or positioned neatly side by side without wasted overhead space.

From a practical installation standpoint, the unit is free-standing and does not require any fixed connection to work. Pre-drilled holes to the rear allow it to be secured to a wall if needed — useful in environments where stability is a concern or where the unit may be subject to movement. At 32kg it can be positioned by two people without specialist equipment, and the slim 300mm width makes it workable even in corridors or compact changing areas.

• Coin return mechanism removes the need for key management
• Anti-bacterial coating suitable for food service environments
• Free-standing with optional wall-fixing for added security
• Flat top allows stacking or side-by-side installation
• Compact footprint suits restricted or corridor spaces

This locker suits smaller catering teams, café or restaurant back-of-house areas, and sites where a modest number of secure personal storage points are needed. For larger teams or higher-capacity requirements, wider bank configurations or additional units may be more appropriate.

If you are unsure how many doors you need or whether this unit suits your specific layout, we are happy to talk it through before you order.

This six-door locker unit from Elite Lockers provides individual lockable storage compartments for staff personal belongings. Each door is secured by a manual combination lock mechanism — no keys to manage or replace — making it a practical choice for busy workplaces where key administration becomes a burden. The sloping top discourages items being left on top of the unit, which is a common requirement in environments where hygiene and tidiness standards are enforced.

The unit is constructed from powder-coated steel and carries an anti-bacterial coating that is resistant to MRSA and E. coli. This makes it well suited to catering, food production, and healthcare environments where surface hygiene is a day-to-day concern, not just a compliance consideration. At 33kg, the unit is manageable to position and free-standing by default, though pre-drilled fixing points to the rear allow it to be secured to a wall where stability or security policy requires it.

Practical advantages for workplace use include:

• Coin-return combination locks remove the need for key management
• Anti-bacterial coating suitable for food and healthcare environments
• Sloping top prevents unsanctioned storage and keeps the area tidy
• Wall-fixable via rear nesting holes without specialist installation
• Blue powder-coat finish for easy zone identification in larger changing areas

The slim 300mm depth makes this unit workable in corridor-style changing areas or rooms where floor space is limited. It is best suited to lower-volume sites or departments where six individual storage points are sufficient. For larger teams or higher-traffic changing areas, a wider or taller configuration may serve better.

If you are specifying lockers across multiple areas or need guidance on quantities and configuration, the team is happy to talk it through before you order.

These six-door lockers from Elite Lockers provide individual secure storage for up to six members of staff, using a manual combination lock mechanism that removes the need for keys or coins. Each door is independently lockable, allowing multiple users to share a single unit without any dependency on one another. The powder coated steel construction is finished in blue and treated with an anti-bacterial coating that is resistant to MRSA and E-coli — a practical consideration in food service and hospitality environments where hygiene standards are closely managed.

In a busy back-of-house setting, reliable personal storage helps keep staff areas tidy and reduces the risk of personal items finding their way into food preparation zones. The coin-return design means there is no ongoing cost to staff and no need for a keyholder to manage lost keys. The flat-top profile keeps the unit straightforward to clean and prevents items accumulating on top.

• Manual combination locks — no keys or coins required for day-to-day use
• Anti-bacterial coating resistant to MRSA and E-coli
• Free-standing with pre-drilled rear fixing points for wall securing
• Robust powder coated steel frame suitable for high-traffic staff areas
• Flat-top design for ease of cleaning

The unit is free-standing, which gives flexibility in placement, though the pre-drilled fixing points to the rear allow it to be secured to a wall where that is preferred for stability or compliance reasons. At 1800mm tall and with a relatively compact footprint, it suits most standard changing or locker rooms. For larger teams requiring more doors or a different configuration, alternative units with greater capacity are available.

This locker is well suited to catering businesses, hospitality venues, leisure facilities, and any workplace where secure staff storage is needed without the administrative overhead of key management. If you are fitting out a staff area and want to discuss quantities, configuration, or colour options, we are happy to help you get it right before you order.

This six-door locker from Elite Lockers is a full-height steel unit designed for staff changing rooms, back-of-house areas, and anywhere that secure personal storage is required. Each of the six compartments is secured by an individual camlock, providing straightforward, key-operated security without the need for padlocks or coin mechanisms. The unit is finished in a tough epoxy polyester powder coat in blue, which resists chips, scratches, and the general wear that comes with daily use in a busy workplace.

The construction reflects the kind of durability expected in commercial environments. Door panels are reinforced, and a welded plinth runs between the door frames to improve inter-compartment security — reducing the flex and gap that can otherwise allow access between adjacent sections. The powder coat finish also makes the unit reasonably straightforward to wipe down and maintain in a presentable condition.

Practical advantages for operators include:

• Individual camlock on each door — no shared access or padlock requirement
• Welded inter-compartment plinth improves security between adjacent bays
• Reinforced doors reduce wear from repeated use over time
• Epoxy polyester powder coat finish resists chipping and is easy to wipe clean
• Blue finish supports colour-coded zoning in larger changing facilities

At 1800mm tall and 300mm wide per bay, this unit has a relatively slim footprint, which suits facilities where floor space is limited. The unit weighs 27kg, so positioning should be considered before installation — particularly if it needs to be manoeuvred through narrow doorways or corridors. It is free-standing and does not require wall fixings, though securing to a wall is advisable in high-traffic areas for added stability.

This locker is well suited to small-to-medium catering operations, hospitality venues, and food production sites needing reliable personal storage for front-of-house or kitchen staff. For larger teams or higher-security applications, wider or deeper configurations may be more appropriate. If you are fitting out a full changing area or need to match existing locker banks, it is worth discussing layout and quantity requirements before ordering.

If you are unsure which configuration best fits your site, our team is happy to talk through your requirements.

This six-door locker unit from Elite Lockers is a robust, free-standing staff storage solution designed for back-of-house environments. Each of the six compartments is secured via padlock fittings — padlocks are not supplied — and the unit features a welded plinth between doors to improve security between adjacent compartments, reducing the risk of access to a neighbouring locker through the gap. The sloping top discourages items being left on top of the unit, which helps maintain a tidier changing area and is a practical consideration in environments where housekeeping standards are monitored. The grey epoxy polyester powder-coated finish provides a hardwearing surface suited to the demands of a commercial staff facility.

In practical terms, a six-door column provides individual storage for six members of staff within a relatively compact footprint, making it a sensible choice for kitchens and hospitality operations where space in the changing or locker room is limited. The welded steel construction and powder-coated finish hold up well under the day-to-day use typical of a busy kitchen brigade, including the occasional knock or scuff that comes with high-traffic staff areas.

• Sloping top keeps the unit clear and supports tidier staff areas
• Welded plinth between doors improves inter-compartment security
• Powder-coated finish resists marking and is straightforward to wipe down
• Six individual compartments support clear personal storage allocation
• Padlock fittings give staff control over their own compartment security

The unit arrives as a single free-standing column and requires no special installation — position on a level floor and ensure adequate clearance for doors to open fully. At just under 30kg, two people are advisable for positioning. The 450mm depth allows for hanging of a coat or jacket alongside personal items. For sites with larger teams or higher storage demands, wider multi-column configurations or deeper units may be worth considering.

This locker is well suited to restaurants, hotels, contract catering operations, and similar hospitality environments where a reliable, no-fuss staff storage solution is needed. It is best suited to sites with up to six staff sharing a locker bank, or as part of a larger arrangement of multiple columns. If your team is significantly larger, it is worth discussing the full range of configuration options before ordering.

If you are specifying lockers across a larger site or are unsure which configuration best fits your available space, our team is happy to talk it through with you.

This six-door padlock locker from Elite Lockers provides six individual secure compartments within a single freestanding unit. Each compartment is secured by the user's own padlock, making it a practical choice for sites where staff prefer to supply their own locks or where master-key systems are not required. The unit is finished in grey using a tough epoxy polyester powder-coated paint, which provides good resistance to knocks, moisture, and the general wear that comes with daily use in busy staffing areas.

The construction includes reinforced doors and a welded plinth between compartments, which meaningfully improves inter-compartment security — reducing the ability to access an adjacent locker through gaps at the door edges. This is a detail worth noting in higher-footfall environments where theft from shared changing areas is a practical concern.

From an operational standpoint, the key advantages include:

• Six individual compartments from a single footprint, keeping changing areas organised
• Padlock compatibility gives staff flexibility without the need for a managed key system
• Welded inter-compartment plinth reduces cross-access security risk
• Powder-coated steel finish is straightforward to wipe down and maintain
• Flat top design allows units to be stacked or placed cleanly against a wall

At 1800mm tall, the unit makes good use of vertical space and is suited to standard-height changing rooms. The 300mm width per locker column is relatively compact, which suits sites with limited floor area. Bear in mind the unit weighs 27kg, so positioning should be considered before installation — moving it once loaded is not practical.

This locker suits hospitality, food service, leisure, and light industrial sites where straightforward, cost-effective staff storage is needed. For larger teams or sites requiring more compartments, wider banks or taller configurations are available within the range.

If you are fitting out a changing area and want to discuss layout, quantity, or colour options, the team is happy to help work through the requirements before you order.