Eight Door Lockers

This eight-door padlock locker from Elite Lockers is a straightforward, robust storage solution designed for staff changing rooms and similar high-traffic areas in commercial and hospitality environments. Each of the eight individual compartments is secured by the user's own padlock, removing the need for a keyed locking system and simplifying day-to-day management for site operators. The unit is finished in graphite grey powder-coated steel, giving it a practical, professional appearance that suits most staff-area fit-outs.

The powder coating carries an antibacterial formulation tested to resist MRSA and E. coli, which is a meaningful consideration in food production, healthcare catering, and hospitality back-of-house environments where hygiene standards are closely managed. The steel construction is reinforced at the doors, where the most wear and impact typically occurs over years of daily use across multiple shift patterns.

A few practical features make this locker easier to live with over the long term:

• Sloping top prevents dust and debris accumulating on the surface, reducing cleaning time
• Angled roof discourages staff from leaving personal items on top, which helps maintain tidy changing areas and reduces lost property incidents
• Pre-drilled rear fixing holes allow the unit to be wall-mounted or nested in rows, keeping it stable when knocked and saving floor space in tighter rooms

At 1950mm tall, this is a full-height unit. It is worth confirming ceiling clearance and door access before ordering, particularly if the installation point is in a basement changing room or a space with restricted entry. At 32.5kg, two people are advisable for positioning. No electrical or plumbing connections are required.

This locker is well suited to catering operations, hotel back-of-house, contract catering sites, and food manufacturing facilities where a reliable, hygienic staff storage solution is needed without the complexity of a keyed master-lock system. For larger installations requiring more doors per unit or different compartment configurations, alternative options are available in the range.

If you are fitting out a changing room and want to talk through quantities, layout, or fixing arrangements, the team is happy to help before you confirm your order.

This eight-compartment padlock locker from Elite is a straightforward, well-built storage unit designed for shared changing areas and staff rooms. Constructed from powder-coated steel with a welded frame and reinforced doors, it is built to withstand regular daily use across a wide range of environments. The graphite grey finish is a practical, neutral choice that sits unobtrusively in most settings.

In busy venues — gyms, leisure centres, sports clubs, schools and similar facilities — lockers take a considerable amount of daily abuse. The welded steel construction here is meaningfully more durable than flat-pack alternatives, and the antibacterial powder coating is formulated to resist common pathogens including MRSA and E. coli, which matters in any shared changing facility where hygiene standards are a genuine operational concern.

From a practical standpoint, this model offers several advantages worth noting:

• Eight individual compartments in a single unit, reducing the number of freestanding pieces to manage
• Padlock-ready doors — no need for integrated lock hardware, which simplifies replacement and reduces maintenance costs
• Pre-drilled rear fixing points allow wall-mounting for stability and to reduce tipping risk
• Units can be nested side by side to close gaps and create a tidier, more space-efficient arrangement
• Antibacterial coating provides a degree of hygiene protection without additional surface treatments

At just over 31kg, the unit is manageable for a two-person installation team, though wall fixing is advisable in higher-traffic areas. The footprint is relatively narrow, which makes it workable in tighter changing rooms, though you should confirm floor space and wall clearance before ordering. This is a flat-top design, which allows units to be stacked or topped with signage where needed.

This locker suits smaller to mid-sized venues with a moderate daily throughput of users. For larger facilities with high-turnover changing areas, a wider bay configuration or a higher number of units may be more appropriate — and for lower-density requirements, a four-door version would be worth considering instead.

If you are fitting out a changing area and are unsure about the right configuration or quantity for your site, we are happy to talk it through before you place an order.

This eight-door locker unit from Elite Lockers is a steel-framed personal storage solution designed for staff changing areas in commercial and institutional environments. Each of the eight compartments is secured by an individual electronic lock, removing the need to manage physical keys — a practical advantage wherever staff turnover is high or shift patterns make key management cumbersome. The sloping top discourages items being left on top of the unit, which helps maintain a tidy, hygienic environment and reduces the accumulation of dust and debris.

The unit is constructed from powder-coated steel with a welded frame and reinforced doors. The powder coating carries antibacterial properties and is resistant to MRSA and E. coli, making it a considered choice for environments where hygiene standards are closely managed — including catering and food production facilities with adjacent changing or welfare areas. The graphite grey finish is practical in appearance and holds up well under everyday use.

From an installation standpoint, the unit includes pre-drilled fixings in the rear panel, allowing it to be wall-anchored or grouped in rows for efficient use of floor space. At 33.5kg, it is manageable to position and install, though two people would be advisable for final placement. The 450mm depth suits standard changing room layouts without projecting excessively into walkways.

• Keyless electronic locking on each door simplifies access management across shift teams
• Antibacterial coating supports compliance with hygiene standards in food-adjacent welfare areas
• Wall-fixing and row-nesting options help maximise use of limited changing room space
• Sloping top discourages improper storage and reduces cleaning burden
• Powder-coated steel construction offers durability in both wet and dry environments

This unit is well suited to catering operations, food production facilities, leisure centres, and similar environments where both security and hygiene are priorities. For sites requiring greater numbers of individual compartments or different configurations, larger multi-door units are available in the range.

If you are fitting out a changing area and want to talk through the right locker configuration for your space and staffing levels, we are happy to help.

This eight-door locker unit from Elite is a steel-framed, powder-coated storage solution designed for staff changing areas in commercial and hospitality environments. Each door is fitted with an electronic combination lock, removing the need for keys or padlocks and the operational headaches that come with them. The unit is finished in a graphite grey powder coating that is antibacterial and resistant to MRSA and E. coli, making it appropriate for environments where hygiene standards are closely managed.

The welded steel frame and reinforced doors are built to hold up well in busy changing rooms where lockers take a fair amount of incidental impact day to day. The powder coating is durable enough for both wet and dry environments, so the unit can be positioned in areas adjacent to showers or wash facilities without concern.

From a practical standpoint, this unit offers several useful operational features:

• Electronic combination locks remove the need to manage keys or issue padlocks to staff
• Antibacterial powder coating supports hygiene compliance in food and hospitality settings
• Pre-drilled rear fixing points allow wall-mounting or row configuration to stabilise the unit
• Units can be nested together in banks to make efficient use of limited changing room space
• Suitable for both wet and dry changing environments

Installation is straightforward. The pre-drilled rear holes allow the unit to be fixed directly to a wall or bolted to adjacent units in a row — both approaches help prevent movement when the lockers are in regular use. At 32.5kg, the unit will need two people to position safely. No electrical connection is required beyond battery power for the electronic locks.

This model is well suited to small to medium-sized hospitality, catering, or food production sites where a compact, hygienic staff storage solution is needed. For larger sites requiring higher door counts or additional security features, heavier-duty configurations are available within the range.

If you are unsure whether this unit suits your changing room layout or whether a different configuration would serve your team better, we are happy to talk it through.

This eight-door locker from Elite Lockers is a straightforward, robust storage solution designed for staff changing areas in commercial environments. Each of the eight compartments is secured by a camlock, providing individual access control without the cost or complication of padlocks or coin-operated mechanisms. The unit is constructed from powder-coated steel with a welded framework, giving it the structural integrity needed to withstand daily use in a busy workplace.

In practice, this type of locker performs reliably in high-footfall environments — whether that is a hotel back-of-house area, a catering kitchen, a leisure facility, or a food production site. The reinforced doors hold up well to the kind of regular opening and closing that comes with shift-change patterns, and the powder coating carries an antibacterial treatment that resists MRSA and E. coli, which is a practical requirement in food-related environments where hygiene standards are taken seriously.

A few features are worth noting from an operational standpoint:

• Sloping top prevents dust and debris accumulating on the surface, reducing cleaning effort
• Angled roof discourages staff or visitors from resting bags or belongings on top, keeping the area tidier
• Antibacterial powder coating supports hygiene compliance in food and healthcare settings
• Pre-drilled rear fixing points allow the unit to be wall-anchored, preventing movement when knocked
• Camlock mechanism on each door provides simple, individual access control

Installation is straightforward. The pre-drilled holes at the rear allow the unit to be fixed directly to a wall, which is advisable given the weight once the locker is in use. Consider floor load, available wall space, and access clearance when planning placement — particularly in narrower changing rooms or corridors.

This model is well suited to smaller sites or teams where eight individual storage compartments meet the requirement. For larger workforces or sites requiring a greater number of lockers, higher-door-count configurations are available. If you are fitting out a full changing room and want guidance on layout or quantity, the team are happy to talk it through before you place an order.

This eight-door locker unit from Elite Lockers provides individual personal storage compartments secured by a coin return locking mechanism. Each door operates independently, making it well suited to staff changing areas, back-of-house corridors, and shared staff facilities where multiple employees need reliable, secure storage for personal belongings during a shift. The graphite grey powder coated steel finish gives a clean, professional appearance that fits comfortably in most commercial environments.

The construction is built around a toughened steel frame with reinforced doors and a welded base, giving the unit the structural rigidity needed to withstand everyday commercial use. The coin return system is compatible with the current British £1 coin, so there are no concerns around legacy coinage. An anti-bacterial coating is applied to help reduce the spread of infection — a practical consideration in food production and catering environments where hygiene standards are closely managed.

The sloping top prevents items being left or stored on top of the unit, which also reduces the accumulation of dust and debris — a minor but useful detail in a busy kitchen or food preparation environment.

• Eight individually lockable compartments for separate users
• Coin return locking — no key management overhead for supervisors
• Anti-bacterial coating supports hygiene requirements
• Sloping top discourages clutter and eases cleaning
• Powder coated steel construction suited to hard-wearing daily use

At 1800mm tall with 450mm deep compartments, the unit offers a reasonable storage depth for personal items including footwear and small bags. It is worth confirming available floor space and ceiling clearance before ordering, and ensuring the installation area has a level, load-bearing floor. At 33.5kg the unit is manageable to manoeuvre but benefits from two-person installation.

This locker bank is a practical choice for catering businesses, food production sites, hospitality venues, and similar operations needing cost-effective, low-maintenance staff storage. For sites requiring more compartments or heavier-duty construction, alternative configurations are available in the range.

If you are unsure whether this unit suits your layout or staffing numbers, the team is happy to talk it through with you.

This eight-door locker unit from Elite Lockers provides individual lockable compartments for staff personal storage in commercial and hospitality environments. Built from powder coated steel in a graphite grey finish, it is a straightforward, practical solution for changing areas, back-of-house corridors, or staff rooms where secure, organised storage is needed.

Each compartment is accessed via a coin return locking mechanism compatible with the current British £1 coin, which means staff retrieve their coin on exit — reducing the ongoing cost of lost or unreturned tokens and keeping the system largely self-managing. The reinforced doors and welded base contribute to a robust overall construction that holds up under the kind of daily use typical in busy hospitality or food production environments.

From an operational standpoint, the unit offers several practical advantages:

• Coin return system is self-managing and compatible with the current £1 coin
• Antibacterial coating supports hygiene standards in food-adjacent staff areas
• Reinforced doors and welded base add structural durability under daily use
• Powder coated steel finish is straightforward to wipe down and maintain
• Eight individual compartments in a single unit keeps the footprint manageable

At 300mm wide and 450mm deep per unit, this locker is designed for environments where space is at a premium. The flat top allows units to be stacked or positioned side by side without wasted vertical space. At just over 32kg, installation is manageable without specialist equipment, though fixing to a wall or floor for stability is worth considering, particularly in high-traffic areas. No electrical or plumbing connections are required.

This unit is well suited to small to medium hospitality businesses, cafés, food production facilities, or any commercial premises needing reliable personal storage for a small team. For larger sites with higher staff numbers, a configuration with additional doors or a multi-bay arrangement may be more appropriate.

If you are fitting out a changing area and want to talk through layout, quantity, or whether this specification suits your site, the team is happy to help before you commit to an order.

This eight-door combination locker from Elite is a manual-lock steel unit finished in a graphite grey antibacterial powder coating. Each of the eight compartments is secured by an individual combination lock, removing the need to manage keys. The welded steel frame and reinforced doors provide a solid, rigid structure suited to demanding everyday use in staff changing areas.

The antibacterial powder coat finish is resistant to MRSA and E. coli, which makes this locker a practical choice for environments where hygiene standards are taken seriously — commercial kitchens, food production facilities, healthcare-adjacent hospitality sites, and similar settings where staff areas are subject to the same scrutiny as operational zones. The finish also holds up well in both wet and dry changing room conditions without deteriorating or harbouring bacteria in the surface.

From an installation and space-planning perspective, the unit includes pre-drilled fixing holes at the rear, allowing it to be secured directly to a wall or bolted in rows when multiple units are deployed side by side. This helps prevent movement under physical impact and keeps the installation tidy in tight or high-traffic changing rooms. At 33.5kg the unit is manageable for two-person installation without specialist lifting equipment. No electrical or water connections are required.

• Keyless combination locks across all eight doors reduce lost-key issues
• Antibacterial coating suitable for hygiene-sensitive environments
• Wall-fixable and nestable for flexible changing room layouts
• Robust welded steel construction for long-term durability
• Suitable for both wet and dry changing room conditions

This model is well suited to smaller teams or sites where space is limited. For larger workforces or higher-volume locker requirements, wider or multi-bank configurations may be a better fit. If you're planning a full changing room fit-out or need guidance on locker quantities and layout, our team is happy to talk through the options with you before you commit to an order.

This eight-door locker from Elite is a manual combination unit finished in a graphite grey powder-coated steel. It is designed for staff changing rooms and welfare areas in commercial environments where reliable, secure personal storage is a daily requirement. Each door is secured by an individual combination lock, removing the need for keys and the ongoing management that comes with them.

The unit is constructed from welded steel with reinforced doors, giving it the structural integrity to handle regular, heavy use in busy changing room environments. The powder-coated finish carries antibacterial properties that are resistant to MRSA and E. coli, which makes it a practical choice for environments where hygiene standards need to be consistently maintained — food production facilities, catering operations, and healthcare-adjacent sites included.

From a practical standpoint, the locker offers several features that reduce day-to-day management overhead:

• Combination locking on each door — no key issuing, tracking, or replacement required
• Antibacterial powder coating resistant to MRSA and E. coli for high-hygiene environments
• Pre-drilled rear fixing points for wall anchoring or row nesting
• Flat top design supports stacking or configuration flexibility
• Welded steel frame with reinforced doors for long-term structural durability

Installation is straightforward. Pre-drilled holes in the rear panel allow the unit to be wall-fixed for stability, or units can be nested together in rows where floor space permits. At 32.5kg, it is manageable to position without specialist handling equipment, though for large installations involving multiple units, planning the layout in advance is worthwhile. No electrical or water connections are required.

This locker is well suited to catering businesses, food manufacturers, leisure facilities, and any workplace where staff require secure, hygienic personal storage. The eight-door configuration suits smaller teams or areas where space is limited. For larger staff complements or higher-density installations, wider bank configurations are available within the range.

If you are fitting out a changing area and want to talk through the right configuration for your space and headcount, we are happy to assist before you place an order.

This eight-door camlock locker from Elite is a free-standing steel storage unit designed for staff changing rooms, welfare areas, and back-of-house environments. Each of the eight individual compartments is secured by its own camlock mechanism, making it a straightforward solution where multiple users need separate, lockable storage within a single unit.

The locker is constructed from powder coated steel with a welded frame and reinforced doors. The powder coating carries an antibacterial finish that is resistant to MRSA and E. coli, which makes it a practical choice for environments where hygiene standards matter — including food production facilities, catering operations, and healthcare-adjacent sites. The graphite grey finish is hardwearing and holds up well in the day-to-day wear of a busy changing room.

From an operational standpoint, the design offers several practical advantages:

• Antibacterial powder coating resistant to MRSA and E. coli for hygiene-sensitive environments
• Pre-drilled rear fixing points allow wall-mounting or row configuration to suit your layout
• Reinforced doors and a welded steel frame provide solid resistance to everyday physical impact
• Eight individual camlock compartments allow separate secure storage for multiple staff members
• Flat top design enables units to be stacked or placed side by side cleanly

Installation is straightforward. Pre-drilled holes in the rear panel allow the unit to be fixed to a wall for added stability, or nested in rows for larger changing rooms. At 31.5kg, it is manageable to position but substantial enough to feel solid once in place. No specialist installation is required beyond basic assembly and fixing.

This locker is well suited to small to medium staff areas where space is at a premium and a single unit needs to serve several people. For larger sites with higher headcounts, multiple units can be banked together, or a higher-capacity configuration may be worth considering.

If you are fitting out a changing room or welfare area and want to talk through the right number of doors, unit configuration, or compliance with any site-specific requirements, the team is happy to help.

This eight-door padlock locker from Elite is a straightforward, robust storage solution designed for staff changing rooms, back-of-house corridors, and similar workplace environments. Each of the eight individually lockable compartments accommodates a padlock of the user's choice, meaning there is no key management system to maintain and no cost to replace if a lock is lost. The unit is finished in black powder-coated steel throughout.

In day-to-day use, the construction holds up well under the kind of repeated opening and closing that comes with busy shift changeovers. The reinforced doors resist the casual knocks and general wear typical of a working catering or hospitality back-of-house environment, and the antibacterial powder coating supports reasonable hygiene standards in areas where food handlers are storing personal belongings.

A few practical details are worth noting before ordering:

• Sloping top panel discourages items being left on top and reduces dust accumulation
• Pre-drilled fixing points allow wall-anchoring or side-by-side nesting to prevent movement
• Antibacterial powder coat finish supports hygiene in food-adjacent staff areas
• Padlock compatibility gives flexibility — no proprietary lock system required
• Eight individual compartments suit smaller teams or shared-shift arrangements

At just under two metres tall, this locker makes good use of vertical space. It is worth measuring your ceiling height and door clearance before installation, and checking that the floor can take the weight of a fully dressed unit in position. The pre-drilled holes make wall-fixing straightforward, though the specific fixing method will depend on your wall construction.

This unit is well suited to smaller catering operations, café or restaurant back-of-house areas, and hospitality venues where a compact, no-fuss storage solution is needed for a team of up to eight. For larger teams or higher-traffic environments, a wider bank of lockers or a higher-compartment configuration may be more appropriate.

If you are unsure which configuration best fits your space or staff numbers, our team is happy to talk it through with you.

This is an eight-door electronic combination locker from Elite Lockers, finished in black powder coated steel. Each door is independently secured via an electronic lock, making the unit suitable for shared staff areas where multiple users need separate, secure storage. The flat-top design allows units to be stacked or placed side by side without wasted space above.

In busy back-of-house environments, lockers take considerable daily use — doors opened and closed repeatedly across multiple shifts, often in conditions that are warm and humid. The welded steel frame and reinforced doors on this unit are built to handle that kind of consistent throughput without deteriorating quickly. The anti-bacterial coating is a practical consideration in high-footfall areas, as it is formulated to inhibit the spread of bacteria including E. coli and MRSA — a relevant factor in catering and food service environments where hygiene standards are closely monitored.

Operationally, this locker offers several practical advantages for catering and hospitality operators:

• Electronic combination locking removes the need to manage physical keys across a large staff team
• Anti-bacterial coating supports hygiene compliance in food service environments
• Pre-drilled fixing points allow wall-mounting or joining units together to suit your available space
• Powder coated steel finish is durable and straightforward to wipe down
• Flat-top design allows clean installation against walls or in rows without aesthetic compromise

Installation is straightforward. The pre-drilled holes allow the unit to be fixed directly to a wall or nested with adjacent lockers to prevent movement under use. At 32.5kg, it is manageable for a two-person installation without specialist lifting equipment, though the dimensions — 1800mm high — mean adequate ceiling clearance and a clear access route are worth confirming before delivery. No power supply or drainage is required beyond standard conditions.

This locker is well suited to catering businesses, restaurants, hotels, and leisure facilities that need reliable staff storage without the overhead of key management. The eight-door configuration works well for small to medium-sized teams. For larger sites with higher headcounts, a greater number of units or a higher-door-count configuration may be more appropriate.

If you are unsure how many units your site requires, or whether this configuration suits your changing room layout, our team is happy to talk it through before you commit to an order.

This eight-door locker unit from Elite is a straightforward, well-built staff storage solution finished in powder-coated steel. Each compartment is secured with an individual camlock, providing basic but reliable personal storage. The sloping top is a considered design choice rather than a cosmetic one — it prevents surfaces being used as an impromptu shelf for bags, cups, or personal items, and it makes the unit quicker to wipe down during routine cleaning rounds.

In busy back-of-house environments, lockers take a fair amount of daily wear. The powder-coated steel construction handles that well — it resists knocks, holds its finish under regular cleaning, and the antibacterial coating is formulated to resist MRSA and E. coli. That last point matters in food service and healthcare-adjacent settings where hygiene standards are closely monitored and evidenced.

Practical advantages worth noting:

• Sloping top actively discourages staff from leaving belongings on top of the unit
• Antibacterial coating supports compliance in high-hygiene environments
• Individual camlocks allow each user to manage their own access without a master key system
• Powder-coated finish wipes clean easily with standard cleaning products
• Black finish sits discreetly in most changing room and staffroom layouts

At just over 1.9 metres in height, this unit fits comfortably within a standard changing room without requiring any structural modification. It is a freestanding unit, so placement is flexible, though it should be positioned on a level floor and ideally fixed back to a wall for stability where there is any risk of it being knocked. The 300mm bay width is a standard individual locker dimension — suitable for everyday clothing and basic personal effects, though not intended for bulky workwear or large bags.

This unit suits smaller teams or spaces where a single bay of eight individual compartments covers requirements. For larger staff numbers or higher-traffic facilities, a configuration with more doors or wider bays would be worth considering. It is also available in other colour options if the black finish does not suit the space.

If you are fitting out a changing room or staff area and want to talk through quantities, layout, or whether this unit is the right fit for your site, we are happy to help before you commit to an order.

This eight-door locker unit from Elite Lockers is a well-established choice for staff changing areas, back-of-house storage, and visitor or contractor locker banks. Each compartment is independently lockable via a coin return mechanism that accepts both current and older British £1 coins, making it a practical option where managed key systems are not in place. The unit is finished in black powder coated steel throughout, giving it a clean, professional appearance that holds up reasonably well in the kind of high-traffic environments found in hospitality and food service operations.

The powder coated steel construction provides a solid, day-to-day durability suitable for staff changing facilities. The reinforced doors and welded base contribute to the overall rigidity of the unit, and the compartment depth is practical for hanging garments or storing personal belongings during a shift. The antibacterial agent applied to the surfaces is worth noting for sites where hygiene compliance is a consideration — catering and healthcare environments in particular tend to prioritise this. The sloping top is a straightforward but important detail: it prevents items being left on top of the unit and makes the surface easier to clean, which matters where cleanliness standards are inspected.

• Coin return locking keeps access simple without requiring key management
• Antibacterial surface treatment supports hygiene compliance requirements
• Sloping top discourages storage on top of the unit and simplifies cleaning
• Powder coated steel finish is robust under everyday commercial use
• Eight individual compartments in a single freestanding unit

Installation is straightforward — the unit is freestanding and requires no electrical or plumbing connections. At 33.5kg it is manageable to position with two people, though access through narrow corridors or stairwells is worth considering before delivery. The 1800mm height suits standard ceiling heights, and the 450mm depth fits most locker room layouts without protruding awkwardly. It is worth confirming floor loading and surface levelness before positioning, particularly if multiple units are being installed side by side.

This unit is well suited to small to medium hospitality or catering operations — restaurants, hotels, contract catering sites, and similar venues where a modest number of staff need secure personal storage. For larger sites requiring significantly more compartments or heavier-duty construction, a higher-capacity locker configuration is likely a better fit. Similarly, if colour matching to an existing fit-out is important, it is worth checking available finish options before ordering.

If you are fitting out a changing area and want to discuss the right locker configuration for your headcount and space, the team is happy to help you work through the options.

This eight door locker unit from Elite is a straightforward, robust storage solution designed for staff changing areas, leisure facilities, hospitality back-of-house spaces, and similar environments where secure personal storage is required for multiple users. Each of the eight compartments is fitted with a coin return mechanism compatible with both old and new British £1 coins, meaning users retrieve their deposit when they vacate the locker — a practical arrangement that reduces lost keys and deters misuse without requiring staff involvement.

The unit is constructed from powder coated steel throughout, with reinforced doors and a welded base providing a solid, stable structure. The 450mm compartment depth is adequate for coats, bags, and everyday personal belongings. The antibacterial treatment applied to the unit is a relevant consideration for high-footfall environments such as leisure centres, hotels, or healthcare-adjacent facilities where hygiene standards are a priority.

From an operational standpoint, this locker bank works well where space is limited but multiple users need to be accommodated. Key practical points to consider:

• Coin return mechanism requires no staff management or key tracking
• Antibacterial coating supports hygiene requirements in busy shared spaces
• Powder coated steel finish resists corrosion and is straightforward to wipe down
• Welded base and reinforced doors contribute to long-term structural integrity
• Flat top design allows units to be stacked or positioned under low ceilings

At 1950mm tall, this is a full-height unit and will require adequate ceiling clearance and a reasonably level floor surface for stable installation. At 32.5kg it is manageable for two people to position, though larger installations with multiple banks should be planned with access routes in mind. The 300mm width keeps the overall footprint narrow, which suits corridor or alcove installations.

This unit is well suited to smaller hospitality or leisure operations needing a compact, self-managed locker solution. For sites with higher volumes of staff or guests requiring storage, a wider bank configuration or heavier-duty locker range may be more appropriate.

If you are fitting out a changing area and want to talk through quantities, layout, or whether this specification is the right fit for your site, the team is happy to help before you commit to an order.

This is an eight-compartment locker unit from Elite, fitted with manual combination locks and a sloping top panel. Each compartment is secured without a key, relying instead on a user-set combination, which reduces the administrative overhead of managing keys across a large workforce. The sloping top discourages the storage of bags and personal items on top of the unit, a practical consideration in high-footfall changing areas where clutter builds quickly.

The unit is constructed from powder coated steel with a welded frame, and the doors are reinforced to resist the kind of repeated, forceful use that comes with busy shift changeovers. The black powder coat finish carries an anti-bacterial treatment that inhibits the spread of bacteria including E. coli and MRSA — a meaningful practical feature in environments where multiple people are moving through the same space daily, such as staff changing rooms, leisure centres, schools, and universities.

From an installation standpoint, the unit arrives with pre-drilled holes, allowing it to be fixed to a wall or bolted to adjacent units. This is worth considering during planning: wall-fixing is advisable in any area where the lockers may be subject to physical pressure or where preventing tipping is a safety requirement. At just over 1,950mm in height, the sloping top brings the overall height above standard ceiling tile grids, so check clearances before installation. The unit weighs 33.5kg, which is manageable for a two-person installation without specialist lifting equipment.

• Anti-bacterial coating suited to high-turnover changing environments
• Combination lock eliminates key management for facilities teams
• Sloping top deters surface clutter in communal areas
• Pre-drilled for wall-fixing or bank configuration
• Powder coated steel construction for durability under daily use

This unit suits smaller staff areas or supplementary locker runs. For larger facilities requiring higher compartment counts or heavier-duty construction, it is worth exploring wider configurations. If you are unsure whether this unit fits your space or usage requirements, the team is happy to talk it through before you order.

This is a freestanding eight-compartment locker unit from Elite Lockers, operated by manual combination locks — no keys to manage or replace. The carcass is constructed from powder coated steel with a welded frame, and each door is reinforced to resist forced entry. The black finish is achieved through a durable powder coat process rather than paint, which holds up better under daily contact and cleaning.

In practice, these units are commonly used in staff changing rooms, back-of-house areas, leisure centres, schools, and similar high-footfall environments where lockers are in constant use throughout the day. The anti-bacterial coating is a practical feature in these settings — it is tested to inhibit the spread of bacteria including E. coli and MRSA, which matters in any shared space where hygiene standards need to be maintained.

From an installation standpoint, the lockers arrive pre-drilled for wall fixing, which helps prevent tipping and movement in busy areas. They can also be nested side by side to make efficient use of wall space. At just over 32kg per unit, they are manageable to position but will typically require two people to install safely. Key practical points to consider:

• Pre-drilled for wall fixing — no additional drilling required on site
• Units can be banked together for larger installations
• Anti-bacterial powder coat finish — practical for hygiene-sensitive environments
• Combination lock operation removes the need for key management
• Suitable for both secured wall mounting and freestanding use where space is limited

These lockers are well suited to smaller staff areas or single-department installations. For larger sites requiring extensive locker banks, it is worth considering whether a wider or taller configuration would better serve the volume of users.

If you are unsure how many units you need or whether this configuration suits your space, we are happy to talk it through before you order.

This eight-door padlock locker from Elite provides individual secure storage across eight separate compartments, each secured by the user's own padlock rather than a keyed or combination mechanism. The sloping top is a practical detail — it prevents items being left or stored on top of the unit, which matters in managed environments where tidiness and fire safety compliance are taken seriously. The graphite grey powder-coated steel finish is a neutral, professional choice that sits well in staff areas without looking out of place.

Powder-coated steel construction gives this unit solid everyday durability. The coating also carries antibacterial properties that help resist the spread of bacteria including MRSA and E. coli, which is a relevant consideration in food-handling and healthcare-adjacent environments where staff welfare areas are subject to hygiene standards. At 29kg, the unit is substantial enough to feel stable in use.

Practical advantages for operators include:

• Eight individual compartments reduce locker allocation disputes in shift-based workplaces
• Padlock security means no master key management or combination resets required
• Sloping top discourages unauthorised storage and supports tidy communal areas
• Antibacterial powder coating supports hygiene standards in food and healthcare settings
• Units can be nested or wall-anchored to prevent movement in busy staff areas

The unit's slim 300mm depth makes it well suited to corridors, alcoves, and changing rooms where floor space is limited. At just under two metres tall it makes good use of vertical space. It is supplied without padlocks, so operators will need to specify these separately. Consider wall-fixing or nesting multiple units together to maintain stability — particularly relevant in high-traffic staff areas where lockers are regularly pushed or knocked.

This locker is a practical choice for hospitality venues, contract catering operations, food production facilities, and similar environments where staff require individual secure storage. Sites needing higher-capacity banks or alternative compartment configurations may find other models in the range better suited to their layout.

If you are fitting out a staff area or replacing ageing lockers and want to talk through quantities, configurations or fixing requirements, the team is happy to help before you commit to an order.

The Elite Eight Door Padlock Locker is a free-standing, multi-compartment storage unit designed for staff changing areas, back-of-house spaces, and similar environments where personal belongings need to be secured during a shift. Each unit houses eight individual compartments arranged in a single column, with each door secured by a padlock hasp — users supply their own padlock, which keeps replacement costs straightforward and avoids master-key logistics.

Construction is powder-coated steel throughout, and the doors are reinforced to handle the daily wear that comes with shift changes in a busy operation. The antibacterial coating is effective against pathogens including MRSA and E. coli, which is a meaningful consideration for any site where hygiene compliance is a requirement — food production facilities, hospital catering units, and similar regulated environments in particular.

From a practical installation standpoint, the rear of the unit is pre-drilled for wall-fixing, which allows it to be secured against a wall to prevent movement and reduce the footprint impact in tighter spaces. At 1800mm tall and 300mm wide, a single column has a relatively modest floor footprint, and multiple units can be banked side by side where larger locker provision is needed.

• Antibacterial coating supports hygiene compliance in regulated environments
• Padlock hasp design keeps individual compartments independent — no shared access risk
• Pre-drilled rear fixing points allow secure wall-mounting
• Powder-coated steel finish is durable and straightforward to wipe down
• Slim column profile allows multiple units to be banked in limited spaces

This locker is well suited to catering and hospitality operations, food production sites, and any workplace requiring compliant, hygienic staff storage. For sites needing fewer compartments per column, or larger individual compartment sizes, alternatives within the range may be a better fit.

If you are fitting out a changing area and want to discuss quantities, layout, or fixing requirements before ordering, the team is happy to help.

This eight door electronic combination locker from Elite Lockers is a wall-mountable, keyless storage unit designed for staff changing rooms and back-of-house areas in commercial environments. Each of the eight compartments is secured by an individual electronic combination lock, removing the need to manage physical keys — a practical advantage in busy operations where key loss or duplication is a recurring issue.

The unit is constructed from powder coated steel and finished in graphite grey. The powder coating is antibacterial, tested as effective against MRSA and E. coli, which makes it a considered choice for food production or healthcare-adjacent environments where hygiene standards in non-food areas are still closely monitored. The sloping top prevents items being left on top of the unit — a small but useful detail in tidy, well-run changing facilities.

From a practical standpoint, the reinforced doors provide resistance to the everyday wear of high-traffic use, and pre-drilled fixing points in the rear of each unit allow it to be secured to the wall or nested side by side with additional units to make the most of available space.

• Keyless electronic combination locks on each individual door
• Antibacterial powder coating effective against MRSA and E. coli
• Reinforced doors for durability in high-traffic changing rooms
• Pre-drilled rear fixing points for wall mounting or nested configuration
• Sloping top prevents unauthorised storage on the unit

At just under two metres tall and with a compact 300mm depth, this locker is well suited to sites where floor space is limited. It works equally well as a standalone unit or as part of a larger bank of lockers. For operations needing more doors per run or heavier-duty construction for particularly demanding environments, higher-capacity configurations are available in the range.

If you are planning a changing room fit-out and want to talk through quantities, layout, or fixing requirements, the team is happy to help before you place an order.

The Elite eight-door electronic combination locker is a wall-mountable, free-standing storage unit designed for staff changing rooms in commercial, hospitality, and catering environments. Each of the eight compartments is secured by an individual electronic combination lock, removing the need for keys or padlocks and reducing the day-to-day management burden on supervisors.

In busy hospitality and catering operations, locker areas take considerable daily wear. This unit is constructed from powder-coated steel with reinforced doors, which holds up well under the repeated use typical of multi-shift kitchens, restaurants, and leisure facilities. The antibacterial powder coating is effective against MRSA and E. coli — a relevant consideration in food service environments where hygiene standards apply beyond the kitchen itself.

From a practical standpoint, the design addresses some common installation headaches in staff areas:

• Pre-drilled rear fixing points allow secure wall-mounting to prevent movement
• Units can be nested together to make efficient use of limited changing room space
• Keyless electronic locks reduce lost-key issues and simplify staff turnover
• Antibacterial coating supports hygiene compliance in food-related workplaces
• Graphite grey finish suits most commercial interiors without specialist finishing

At 1800mm tall and with a shallow 300mm depth, this locker is well suited to spaces where floor area is limited. It is worth confirming wall construction before fixing — the unit weighs 28kg unloaded, and wall anchoring should be appropriate for the substrate. If your site requires more than eight compartments, the same range is available in configurations offering greater capacity.

This locker is a practical choice for catering businesses, hotels, leisure facilities, and similar environments that need reliable, hygienic staff storage without complex key management. If you are fitting out a larger changing area or have questions about configuring multiple units, the team is happy to talk through what will work best for your space.

This eight-door locker from Elite is a straightforward, well-built storage unit designed for staff changing areas in commercial and hospitality environments. Each door is secured by a camlock, providing individual compartment security without the need for padlocks. The unit is finished in graphite grey powder-coated steel with an antibacterial coating that inhibits the growth of MRSA and E. coli — a practical consideration in food service and catering environments where hygiene standards are closely managed.

The sloping top serves two purposes in day-to-day use. It prevents dust, grease, and debris from accumulating on the surface — a common issue in back-of-house areas — and it discourages staff or visitors from resting bags or personal items on top of the unit, which both reduces clutter and limits the risk of items being left unattended.

In practical terms, this locker suits venues where individual secure storage is needed but floor space is limited. The narrow 300mm depth makes it well suited to corridors, smaller changing rooms, and ancillary staff areas. Pre-drilled fixing holes at the rear allow the unit to be anchored to the wall, which is advisable in high-traffic areas to prevent movement and to make efficient use of the available footprint.

• Antibacterial powder-coat finish supports hygiene compliance in food-related environments
• Camlock doors provide individual security without additional padlocks
• Sloping top reduces cleaning time and prevents surface clutter
• Wall-fixable via rear pre-drilled holes for stability and space efficiency
• Compact 300mm depth suits tight changing room and corridor installations

This unit is well suited to small to medium-sized catering operations, hotels, leisure facilities, and contract catering sites needing reliable individual staff storage. For larger sites requiring higher door counts or greater compartment depth, higher-capacity configurations are available in the range.

If you're fitting out a changing area and want to discuss locker quantities, layout, or fixing requirements, we're happy to talk it through before you order.

This eight-door locker unit from Elite Lockers provides secure, individual storage compartments for personal effects in shared environments such as staff changing areas, leisure facilities, schools, and public-facing hospitality or catering venues. The coin return mechanism accepts the current British £1 coin, making it a practical choice for self-managed, unsupervised areas where staff or visitors pay a refundable deposit to use a locker. The graphite grey powder-coated steel finish gives it a workmanlike appearance that sits comfortably in both back-of-house and semi-public spaces.

The unit is constructed from a toughened steel frame with reinforced doors and a welded plinth, which contributes to its stability and resistance to the kind of daily wear that comes with repeated use over many years. The anti-bacterial coating is rated to inhibit MRSA and E. coli, which is a meaningful consideration in catering and healthcare-adjacent environments where hygiene standards apply beyond the kitchen itself. The sloping top prevents the accumulation of dust, discarded items, and grime — a practical detail that reduces housekeeping burden in busy facilities.

Key practical points worth noting:

• Coin return locking is compatible with the current British £1 coin
• Anti-bacterial coating addresses MRSA and E. coli inhibition
• Sloping top reduces dust and debris build-up
• Welded plinth and reinforced doors support long-term structural integrity
• Powder-coated graphite grey finish suits both staff and semi-public areas

At 1950mm high, this is a full-height unit, so ceiling clearance and the practicalities of manoeuvring it into position should be considered before ordering, particularly in basement changing rooms or areas with restricted access. Each compartment is 300mm deep, which accommodates everyday personal items but is not suited to storing bulky outerwear or large bags — operators with higher storage demands per user may want to consider a deeper or larger-compartment alternative.

This locker bank is well suited to catering and hospitality businesses that need a reliable, hygienic, and low-maintenance storage solution for staff. The coin return system works well where there is no dedicated locker attendant. If you are fitting out a larger facility or have specific layout or volume requirements, the team is happy to talk through the options before you commit to an order.

This eight-door locker unit from Elite Lockers is a freestanding, coin return storage solution finished in graphite grey powder-coated steel. Each compartment is designed to hold personal effects securely, with a coin return locking mechanism that is compatible with the current British £1 coin — making it well suited to environments where self-managed access is required without ongoing key administration.

The unit is built for consistent, everyday use in busy shared environments. The toughened steel frame and reinforced doors are designed to withstand the kind of repeated use typical in changing rooms, staffrooms, and public leisure facilities. A welded plinth supports the base of the structure, adding rigidity and keeping the unit stable on hard floor surfaces.

From an operational standpoint, this locker addresses several practical concerns common to high-footfall environments:

• Coin return mechanism reduces key management burden for operators
• Anti-bacterial coating rated against MRSA and E. coli, supporting hygiene standards
• Powder-coated steel finish resists scratching and is straightforward to wipe clean
• Reinforced doors and welded construction reduce maintenance requirements over time
• Flat top design allows units to be stacked or arranged in banks without wasted space

At 300mm deep per compartment, the unit is suited to storing personal items such as bags, clothing, and valuables — though it is worth considering whether the compartment depth meets your specific storage requirements before ordering. The graphite grey finish blends well in modern commercial interiors, though it is worth confirming it matches your existing fit-out if visual consistency matters.

This unit is a practical choice for workplaces, leisure centres, schools, and similar facilities needing reliable, low-maintenance locker provision. For sites requiring larger compartments, greater capacity per unit, or alternative locking systems, other configurations are available in the range.

If you are fitting out a larger area or need to confirm the right configuration for your space, our team is happy to help you work through the options.

The Elite eight-door combination locker is a manual, keyless locker unit built for staff changing room use in commercial environments. Each of the eight individually lockable compartments uses a combination mechanism, removing the need to manage keys — a practical advantage where staff turnover is high or shift patterns are complex. The unit is finished in graphite grey powder coated steel, with a sloping top to prevent items being stored on top of the unit and to aid general tidiness in the changing area.

The powder coating carries an antibacterial treatment effective against common pathogens including MRSA and E. coli. In food production, hospitality, and healthcare-adjacent environments where hygiene standards in staff areas are taken seriously, this provides a meaningful practical benefit rather than a cosmetic one. The steel construction is reinforced at the doors, which helps the unit hold up under the repeated daily use typical of busy shift-based operations.

From an installation standpoint, the unit comes with pre-drilled fixing points at the rear, so it can be secured directly to a wall for stability or nested alongside additional units to make efficient use of limited changing room space. At 1,950mm high and a relatively slim 300mm deep, it works well in narrow or awkward changing room layouts where space is at a premium.

• Keyless combination locks — no key management required across shifts
• Antibacterial coating supports hygiene compliance in food environments
• Reinforced doors for durability under high daily usage
• Wall-fixable and nestable for flexible, space-efficient installation
• Sloping top discourages clutter and aids changing room management

This unit is well suited to smaller teams or secondary changing areas. For larger sites requiring more doors per unit or wider compartments, alternative configurations are available. If you are fitting out a full staff area and want to talk through quantities, layout, or wall-fixing requirements, the team is happy to help you work through it.

The Elite eight-door combination locker is a freestanding steel locker bank designed for staff changing rooms, back-of-house areas, and similar environments where secure personal storage is needed. Each of the eight individual compartments is secured by a built-in manual combination lock, removing the need to manage keys or tokens — a practical advantage in busy operations with high staff turnover or shift-based teams.

Constructed from powder-coated steel, the unit carries an antibacterial coating that has been tested against common pathogens including MRSA and E. coli. In food-service and hospitality environments where hygiene standards extend beyond the kitchen itself, this is a meaningful consideration rather than a cosmetic one. The graphite grey finish is practical in appearance and reasonably resistant to the marks and scuffs that come with regular use in working environments.

From an installation standpoint, the unit is straightforward to position. Pre-drilled fixing points at the rear allow it to be wall-anchored for stability, and multiple units can be nested side by side where space is being maximised. At 1800mm tall with a relatively compact 300mm depth, it fits comfortably along corridor walls or in tighter changing room layouts without dominating the space. At 28kg it can be manoeuvred by two people without specialist equipment.

• No key management required — manual combination locks on every door
• Antibacterial coating effective against MRSA and E. coli
• Wall-fixable and nestable for flexible, stable installation
• Slim 300mm depth suits corridors and compact changing rooms
• Graphite grey powder-coated steel finish for durability

This unit is well suited to small to mid-sized hospitality, catering, or leisure operations needing a compact, hygienic locker solution. For larger sites requiring more compartments or heavier-duty construction, wider or taller configurations are available within the range.

If you're fitting out a changing room and want to talk through layout, quantity, or fixing requirements before ordering, we're happy to help.

The Elite eight-door camlock locker is a freestanding storage unit intended for staff changing rooms and back-of-house areas in commercial and hospitality environments. Each of the eight individual compartments is secured by its own camlock, providing a straightforward and reliable locking arrangement without the complexity of combination or electronic systems. The unit is finished in a graphite grey powder-coated steel, giving it a clean, professional appearance that sits comfortably in most staff facilities.

The powder coating carries an antibacterial treatment effective against common pathogens including MRSA and E. coli. In environments where hygiene standards extend beyond the kitchen itself — particularly in food-production or healthcare-adjacent settings — this is a practical consideration rather than a marketing point. The steel construction is reinforced at the doors, which helps the unit withstand the daily wear of high-footfall changing rooms without the doors warping or the hinges loosening prematurely.

From an installation standpoint, the unit comes with pre-drilled fixing holes in the rear panel, allowing it to be wall-mounted for additional stability or bolted to adjacent units where space is tight and lateral movement needs to be prevented. At 1800mm tall, it makes good use of vertical space, which is often at a premium in staff areas.

• Antibacterial coating helps maintain hygiene in food-handling environments
• Reinforced doors reduce wear in high-footfall changing rooms
• Camlock system is simple to manage and rekey if required
• Wall-fixing option adds stability without requiring floor anchoring alone
• Units can be nested together to maximise space in compact areas

This locker suits smaller teams or operations where individual compartments per person are needed within a single unit. For larger workforces, multiple units can be combined, and higher-capacity configurations are available if a single bank needs to accommodate more staff. If you are fitting out a full changing room and want to discuss layout, fixing arrangements, or volume requirements, our team is happy to work through the specifics with you.

The Elite eight-door padlock locker is a free-standing, multi-compartment storage unit intended for staff changing rooms, back-of-house areas, and similar staff facilities in commercial and hospitality environments. Each of the eight individual compartments is secured by a padlock-ready hasp, meaning staff supply their own padlock and retain responsibility for their own belongings — a practical arrangement for sites that prefer not to manage key or combination systems centrally. The sloping top prevents items being left or stored on top of the unit, which helps maintain a tidier environment and discourages unauthorised use of the surface.

Constructed from powder-coated steel, the unit is built to handle the day-to-day demands of a busy staff area. The doors are reinforced to resist the kind of repeated, heavy-handed use that locker banks in high-turnover environments typically see. Pre-drilled fixing points allow the locker to be secured to a wall or floor, which is advisable in most commercial settings both for stability and health and safety compliance. The anti-bacterial coating is effective against common pathogens including MRSA and E. coli, which is a useful property in any environment where hygiene standards are a consideration — particularly relevant in food-service and healthcare-adjacent settings.

In practical terms, this locker suits sites that need to provide secure personal storage for a modest number of staff without the management overhead of a master-key or coded-lock system. It is a straightforward, low-maintenance option:

• No lock management required — staff use their own padlocks
• Sloping top prevents surface clutter and unauthorised storage
• Anti-bacterial coating supports hygiene compliance in food-service environments
• Pre-drilled fixing points allow secure, fixed installation
• Powder-coated finish resists knocks and is easy to wipe down

At 1950mm tall with a narrow 300mm-square footprint per column, this unit fits into relatively confined back-of-house spaces, though at 29kg it will require two people to position and fix safely. Installation is straightforward provided fixing points are accessible, but it is worth confirming wall substrate suitability before ordering wall fixings separately.

This locker is well suited to smaller hospitality teams, café and restaurant back-of-house areas, and similar settings where eight compartments covers the requirement. For larger teams or sites needing more compartments, wider bank configurations are available in the range. If you are unsure whether eight doors is the right number for your site, or have questions about fitting multiple units in a confined space, feel free to get in touch and we can talk through the options.

This eight-door locker unit from Elite Lockers is built for staff changing areas in commercial environments where durability, security, and day-to-day practicality all matter. Each of the eight compartments is secured by an electronic combination lock, removing the need for keys and reducing the administrative overhead that comes with managing them across a busy team. The sloping top panel discourages items being left on top of the unit, which helps keep changing areas tidy and reduces the risk of unauthorised access to stored belongings via the roof of the locker.

The carcass is constructed from powder-coated steel, which gives it the rigidity needed to withstand regular use in environments where lockers are opened and closed dozens of times a day. The finish also makes the surface straightforward to wipe down, which is a practical consideration in any welfare facility where hygiene standards are expected to be maintained. The black powder-coat finish suits modern staff room and changing room fitouts where a clean, professional aesthetic is important.

Key practical features include:

• Electronic combination locks — no keys to manage or replace
• Sloping top to prevent unauthorised storage on top of the unit
• Powder-coated steel construction for durability and ease of cleaning
• Pre-drilled fixing points for wall-mounting or nesting units together
• Antibacterial coating effective against common pathogens including MRSA and E. coli

The pre-drilled fixing points mean the unit can be secured directly to a wall or lined up flush with adjacent lockers to prevent movement and make the most of available floor space. At 1950mm tall the unit works well in standard-height changing rooms without feeling oversized, though the footprint of 300mm deep by 300mm wide per column means a full run of units does require considered placement in smaller rooms.

This eight-door configuration suits smaller teams or supplementary locker provision where a full bank is already in place. For larger workforces or high-turnover environments, units with a greater number of doors or wider compartments may be more appropriate, and it is worth considering whether electronic combination or key-lock variants better suit your site's operational needs.

If you are specifying lockers for a new fitout or replacing an existing bank, we are happy to talk through configuration, quantities, and layout before you commit to an order.

This eight-door locker unit from Elite Lockers is a free-standing, powder coated steel storage solution designed for staff changing rooms, back-of-house areas, and similar high-traffic environments. Each of the eight individual compartments is secured by an electronic combination lock, removing the need for keys or padlocks and reducing the day-to-day management burden for site supervisors.

The steel construction is robust enough to withstand the regular use typical of a busy catering operation, where staff changeover happens across multiple shifts every day. The powder coated finish includes an antibacterial treatment that is effective against common pathogens including MRSA and E. coli, which is a practical consideration in any food service environment where hygiene standards extend beyond the kitchen itself.

From an installation standpoint, the unit arrives ready to fix. Pre-drilled holes allow it to be secured flush to a wall, which reduces movement over time and keeps the installation tidy. Multiple units can be nested together where space is limited, making it straightforward to configure a larger bank of lockers within a compact changing area.

• Electronic combination locks on all eight doors — no keys to manage or replace
• Antibacterial coating supports hygiene standards in food service environments
• Pre-drilled fixing points for wall mounting or unit-to-unit nesting
• Powder coated steel construction suitable for daily heavy use
• Flat top design allows units to be stacked or arranged in rows without wasted space

This unit is well suited to smaller catering operations or sites where a modest number of staff require secure personal storage. For larger teams or sites with higher locker demand, additional units or a wider configuration may be more appropriate. If you are unsure how many doors or units your site requires, the team is happy to talk through the options before you order.