Five Door Lockers

This is a five-compartment padlock locker from Elite, finished in graphite grey powder coated steel and fitted with a sloping top panel. Each compartment is secured by the user's own padlock rather than a built-in lock, which suits environments where management prefers not to hold keys or issue combination codes across a large user base.

The powder coated steel construction is specified to resist MRSA and e-coli, which makes these lockers a practical choice for wet or high-traffic environments where hygiene standards matter — swimming pools, leisure centres, gyms, and sports clubs being the most common settings. The same properties also make them suitable for schools, colleges and university changing facilities where cleaning regimes need to be straightforward and consistent.

The sloping top serves two practical purposes: it prevents dust and debris settling on the upper surface, making routine cleaning quicker, and it removes the flat ledge that users might otherwise leave bags or belongings on — a small but useful consideration for lost property and general housekeeping.

• Antibacterial powder coating resists MRSA and e-coli for hygiene-critical environments
• Sloping top deters items being left on top and simplifies cleaning
• Pre-drilled rear fixings allow wall-mounting or nesting units together
• Padlock-ready design removes the need to manage keys or codes centrally
• Powder coated steel construction suited to damp or humid environments

The pre-drilled fixing points in the rear panel allow the units to be anchored to a wall or bolted together in a bank, which helps with stability and tidiness once installed. At 1,950mm tall, these are full-height lockers — worth confirming ceiling clearance and doorway access before delivery, particularly in older buildings with restricted corridors.

These lockers are well suited to leisure, education and hospitality venues needing reliable, low-maintenance storage. If your site requires higher-capacity compartment arrangements or different locking mechanisms, it is worth discussing your layout and user volume with us before ordering.

If you are unsure whether this configuration is the right fit for your space or user numbers, we are happy to talk it through.

This five-door padlock locker from Elite provides individual secure storage across five separate compartments within a single unit. Constructed from powder coated steel with reinforced doors, it is built to withstand the kind of daily use typical of commercial changing room environments — repeated opening and closing, knocks from bags and equipment, and the general wear of a high-footfall setting.

In practice, this type of locker suits sites where staff or guests need a personal, lockable space but where floor space is limited. The five-compartment layout makes it practical for smaller teams or shared facilities, and the graphite grey finish is neutral enough to work across a range of interior schemes without looking out of place.

A few practical points worth noting before installation:

• Pre-drilled fixing holes in the back panel allow the unit to be mounted flush to a wall, keeping it stable and reducing movement when the doors are used heavily
• The powder coated steel finish offers reasonable corrosion resistance, though it is worth considering the humidity levels in the intended location
• At 450mm depth, the unit has a reasonably compact footprint relative to its height, which helps in tighter changing room layouts
• Padlocks are not included — users supply their own, which gives flexibility on the type of lock used
• The unit weighs 26kg, so two-person installation is advisable, particularly when wall-fixing

This locker is well suited to staff changing areas in hospitality venues, leisure centres, sports clubs, schools, and similar sites. It is a practical choice for smaller teams. For larger sites with a greater number of users, a wider bank or higher-door-count configuration may be more appropriate — something worth considering before committing to a specific quantity.

If you are unsure how many units you need, or whether this configuration suits your layout, the team is happy to talk it through.

This is a five-door electronic combination locker from Elite Lockers, finished in graphite grey powder-coated steel with a sloping top to prevent items being left or stored on top of the unit. Each door is independently locked via an electronic combination mechanism, removing the need to issue or manage physical keys — a practical advantage in any busy staff facility.

In hospitality, healthcare, and food service environments, staff changing areas take considerable daily use. This locker is built for that kind of sustained, repetitive demand. The powder-coated steel construction is robust enough for regular use, and the antibacterial coating is rated effective against MRSA and E. coli — a relevant consideration in any food preparation or healthcare setting where hygiene standards are taken seriously.

From an operational standpoint, several design details make day-to-day management easier:

• No key management required — electronic codes can be reset between users
• Antibacterial powder coating supports hygiene compliance in food and healthcare environments
• Pre-drilled rear fixing holes allow the unit to be secured flush to the wall, keeping the locker bank stable and the layout tight
• Sloping top prevents accumulation of personal items above the unit
• Individual door locking gives each user independent, secure access

At 450mm deep and weighing just under 32kg, this unit is relatively straightforward to position and wall-fix without specialist installation. It suits most standard changing room layouts. Bear in mind that the 300mm width per locker column means careful space planning is worthwhile before ordering multiple bays — particularly in narrower rooms where circulation space matters.

This model is well suited to small to medium staff teams in restaurants, hotel back-of-house areas, care homes, and similar environments. If you're fitting out a larger facility or need a greater number of doors in a single unit, wider multi-door configurations may be worth considering.

If you're unsure how many units you need or how to plan the layout around your available wall space, the team is happy to work through the options with you before you place an order.

This five door electronic combination locker from Elite is a wall-fixable, powder coated steel unit designed for use in staff changing rooms, back-of-house areas, and similar high-traffic environments. Each of the five independently accessed compartments is secured by an electronic lock, removing the need for keys or padlocks and making it practical to manage in shift-based workplaces where staff turnover throughout the day is high.

In busy operational settings, durability matters more than aesthetics. The steel construction and reinforced doors are built to withstand the kind of daily knocks and heavy use that come with a working kitchen or hospitality environment. The antibacterial powder coating — effective against MRSA and E. coli — is a practical consideration for food service and healthcare sites where hygiene standards are closely monitored. The graphite grey finish is neutral enough to sit comfortably in most back-of-house layouts without looking out of place.

From an installation standpoint, the unit includes pre-drilled fixing holes at the rear, allowing it to be secured flush to the wall. This prevents movement when doors are opened or the unit is knocked, and helps achieve a tighter, more efficient layout when multiple locker banks are positioned side by side. The 450mm depth is fairly standard for changing room environments and works well against most partition walls without encroaching significantly on circulation space. At just over 30kg, it is manageable for a two-person installation without specialist lifting equipment.

This locker is well suited to catering businesses, hospitality venues, and food production sites looking for a hygienic, low-maintenance staff storage solution. For sites with larger teams or higher daily throughput, multi-bank configurations or higher door-count units may be worth considering.

If you are fitting out a changing room or staff area and want to talk through locker quantities, layout options, or fixing requirements, the team is happy to help before you commit to an order.

This five door locker from Elite Lockers is a straightforward, well-built storage unit designed for commercial changing rooms, staff areas, and similar environments where a reliable, hygienic locker solution is needed. Each of the five compartments is secured by an individual camlock, providing personal security without the complexity of a master key system. The unit is finished in graphite grey powder-coated steel throughout.

In practice, this type of locker suits environments that see regular daily turnover — hospitality back-of-house areas, leisure facilities, healthcare staff rooms, and similar settings where the units are in near-constant use. The powder coating carries an antibacterial treatment that is effective against common pathogens including MRSA and E. coli, which is a meaningful consideration in food production and healthcare environments where hygiene standards are closely monitored.

A few practical points worth noting:

• Sloping top prevents dust accumulation and discourages items being left on top of the unit
• Antibacterial powder coating supports compliance in high-hygiene environments
• Reinforced doors and robust steel frame hold up well under daily commercial use
• Pre-drilled fixing points in the back allow the unit to be secured flush to a wall
• Camlock per door gives individual compartment security without a master key

Installation is straightforward. The pre-drilled rear fixing points mean the unit can be anchored directly to a wall, which is advisable in high-traffic areas to prevent movement over time. At 27kg the locker can be moved and positioned by two people without specialist equipment. No electrical or plumbing connections are required.

This model is well suited to smaller staff areas or supplementary locker runs where space is limited. For larger installations or sites requiring greater individual compartment depth or height, it is worth considering whether a different configuration would serve better across the full locker run.

If you are specifying lockers for a new build or refurbishment and want to talk through quantities, layout, or suitability for your specific environment, the team is happy to help before you commit to an order.

This five-door locker from Elite provides secure, individual personal storage in a single free-standing unit. Each door is fitted with a coin return locking mechanism — the type that accepts a coin to release the key, returning it when the locker is vacated — making it practical for shared staff or public-facing environments where locker allocation changes throughout the day. The unit is constructed from powder-coated steel and carries an antibacterial coating rated effective against MRSA and E. coli, which is a relevant consideration in food preparation and hospitality settings where hygiene standards are closely managed.

The sloping top is a considered design detail. It prevents items being left or stacked on top of the unit, which can become a hygiene and clutter issue in busy staff areas, and makes the surface straightforward to wipe down during routine cleaning. The coin mechanism is compatible with both old and new British £1 coins, so there is no need to source or stock additional tokens.

This locker is well suited to:

• Staff changing areas in commercial kitchens and catering facilities
• Leisure, hospitality, and healthcare environments
• Any setting requiring hygienic, coin-operated personal storage
• Spaces where lockers need to serve shift-based or temporary users

At 1800mm tall, the unit is full-height and offers a reasonable depth for standard personal effects. It is a single, self-contained column rather than a bank of wider locker units, so it suits tighter spaces or situations where a modest number of lockers is sufficient. For larger teams or higher-volume sites, multiple units or wider bank configurations may be worth considering.

If you are fitting out a staff area and want guidance on the right quantity or layout for your space, we are happy to talk it through before you order.

This five door locker unit from Elite provides individual lockable storage compartments finished in graphite grey powder coated steel. Each door is fitted with a coin return mechanism, allowing users to secure their belongings during a shift and recover the coin upon leaving — a practical arrangement commonly used in staff changing areas, leisure facilities, and food service environments where locker management and accountability both matter.

The steel construction is treated with an antibacterial coating that has been tested against MRSA and E-coli, which is a relevant consideration in catering and healthcare environments where hygiene standards are closely governed. Reinforced doors help resist the everyday wear that comes with shared facilities and high staff turnover, and the unit accepts both old and new British £1 coins, avoiding the compatibility issues that older coin-operated systems can present.

From an operational standpoint, this unit suits environments where a deposit-based locker system is preferable to key management — removing the administrative burden of tracking keys across shifts. Practical advantages include:

• No key management required — coin return system is self-administered by users
• Antibacterial surface treatment supports hygiene compliance in food and healthcare settings
• Five individual compartments in a single freestanding unit
• Powder coated finish offers durability and ease of surface cleaning
• Compatible with current UK £1 coinage — no retrofitting required

At just over 300mm wide, this is a relatively compact unit suitable for tighter changing areas or corridors where space is limited. It is worth confirming floor loading and fixing requirements before installation, particularly in older buildings. For sites requiring a greater number of compartments or higher daily throughput of users, larger bank configurations are available.

If you are fitting out a new staff area or replacing an existing locker bank and want to discuss the right quantity or configuration for your site, the team is happy to help you work through the options.

This is a five door upright locker from Elite Lockers, finished in graphite grey powder coated steel. Each of the five compartments is secured by a manual combination lock, removing the need to issue and manage keys — a practical consideration in staff areas where turnover is high or shift patterns are varied. The sloping top discourages items being left on top of the unit, which helps maintain tidier changing rooms and reduces clutter in confined spaces.

The powder coated steel construction is robust enough for daily use in commercial environments. The antibacterial coating is certified effective against MRSA and E. coli, which is a relevant consideration for food service operations where hygiene standards extend beyond the kitchen floor into staff welfare areas. Pre-drilled fixing holes in the rear panel allow the unit to be secured flush to a wall, preventing movement when knocked and allowing lockers to sit neatly side by side without unnecessary gaps.

Practically, this locker suits operations that need a compact, multi-user storage solution without the ongoing cost and administration of padlocks or key systems. It is well suited to:

• Staff changing rooms in catering and hospitality venues
• Back-of-house welfare areas where hygiene compliance matters
• Sites needing keyless access management across multiple users
• Installations where wall-fixing is required for stability and layout efficiency

At 300mm wide, this is a slimmer unit than standard full-width lockers, so it is worth confirming it meets your storage requirements before ordering — particularly if staff need to hang full-length clothing. For higher-capacity or wider-compartment requirements, alternative configurations are available in the range.

If you are fitting out a changing room or welfare area and want to discuss layout, locker count, or whether this configuration suits your team size, we are happy to help you plan it through before you commit.

This is a five-door manual combination locker from Elite Lockers, manufactured in powder coated steel and finished in graphite grey. Each of the five individual compartments is secured by its own combination lock, removing the need for keys and the administration that comes with them. It is designed for staff changing areas, back-of-house corridors, and similar shared facilities in commercial premises.

The powder coated steel construction gives the unit a reasonable degree of robustness for day-to-day changing room use. The antibacterial coating provides protection against common pathogens including MRSA and E. coli, which makes it a practical choice in environments where hygiene standards are taken seriously, such as food production, healthcare, or hospitality back-of-house areas. Pre-drilled fixing holes in the rear panel allow the locker to be secured flush to a wall, which improves stability and helps achieve a tidier, more space-efficient layout when deploying multiple units side by side.

• No key management required — combination locks on all five doors
• Antibacterial coating effective against MRSA and E. coli
• Wall-fixable via rear pre-drilled holes for a secure, flush installation
• Powder coated steel construction suited to busy changing room environments
• Graphite grey finish works well in professional back-of-house settings

At 1800mm tall and 300mm wide, this is a relatively slim unit. It is worth measuring your available space carefully before ordering, particularly if you are planning a bank of lockers — the 300mm depth is shallower than some alternatives and may not suit sites where staff need to store bulkier items such as outdoor clothing or large bags.

This locker is well suited to hospitality, food service, and light industrial workplaces where a clean finish, basic security, and hygienic surfaces are the priority. Sites with higher storage demands or larger numbers of staff may find a wider or deeper locker bank a better fit.

If you are fitting out a changing room or staff area and want to talk through numbers, layout, or whether this unit suits your specific situation, the team is happy to help before you commit to an order.

This five-door camlock locker from Elite is a straightforward, well-built unit designed for staff changing rooms in commercial and hospitality environments. Constructed from powder-coated steel, it provides five individually lockable compartments in a single upright frame, making it a practical choice where space efficiency and security are both priorities.

In busy back-of-house settings, lockers take a good deal of daily punishment — doors opened under pressure, units knocked during changeovers, cleaning routines that involve damp or chemical sprays. This unit is built with that reality in mind. The reinforced doors and robust steel framework hold up well under regular, heavy use, and the antibacterial powder coating has been tested as effective against MRSA and E. coli, which matters in catering and healthcare environments where hygiene standards are non-negotiable.

A few practical advantages that make this unit straightforward to specify and install:

• Antibacterial powder coating effective against MRSA and E. coli
• Camlock system provides secure, individual compartment access
• Pre-drilled rear fixing holes allow flush wall mounting
• Wall-fixed installation prevents movement when knocked or loaded
• Flat top design allows stacking or use of the surface for storage

The pre-drilled fixing points at the rear are worth noting — wall-mounting the unit keeps it stable and allows a tighter, cleaner layout when positioning multiple lockers side by side. The flat top also allows units to be stacked where ceiling height permits, or used as a surface for bags and equipment in smaller rooms.

At 1800mm tall and 300mm wide per unit, this locker suits sites where floor space is limited but staff headcount requires multiple compartments. It is well suited to hospitality venues, contract catering operations, food production facilities, and leisure sites. For larger teams or higher-security applications, wider or more heavily specified alternatives are available in the range.

If you are fitting out a changing room and want to talk through quantities, layout, or fixing requirements, our team is happy to help you get the specification right before you order.

This is a five door electronic combination locker from Elite Lockers, finished in black powder coated steel with a sloping top to discourage items being left on top of the unit. Each door is operated by an electronic combination lock, removing the need to manage physical keys — a practical advantage in busy staff areas where lost keys create unnecessary disruption.

The locker is built on a welded steel frame with reinforced doors, which holds up well in the kind of heavy daily use you would expect in a working changing room. The sloping top profile is a considered detail for environments where keeping the area tidy and hygienic matters. Pre-drilled nesting holes in the rear of each unit allow the locker to be fixed in position, which helps prevent movement and makes better use of the available floor space when units are installed side by side.

From an operational standpoint, the key practical advantages are:

• Electronic combination locks eliminate the cost and admin of physical key management
• Antibacterial coating that is effective against MRSA and E. coli, supporting hygiene requirements in wet or dry changing environments
• Sloping top discourages clutter and contributes to a tidier, more compliant changing area
• Rear nesting holes allow secure wall or floor fixing to prevent shifting over time
• Powder coated steel finish offers a durable, cleanable surface suited to daily use

At just under two metres tall, this unit is suited to standard changing room ceiling heights. The powder coated steel construction means it can handle both wet and dry environments without concern. It is worth confirming your available floor space against the unit footprint before ordering, particularly if you are planning to nest multiple units together.

This locker is well suited to catering and hospitality operations that need secure, manageable staff storage without the overhead of key-based systems. It works particularly well in sites with moderate staff numbers. For larger operations needing higher door counts or different configurations, alternative options are available within the range.

If you are unsure whether this configuration fits your changing area or staff numbers, we are happy to talk it through before you commit.

This is a five door electronic combination locker from Elite Lockers, finished in black powder coated steel. Each of the five individual compartments is secured by an electronic lock, removing the need for physical keys and the operational headaches that come with managing them across a busy team. The welded steel frame and reinforced doors give the unit a solid, robust construction suited to everyday commercial use in staff changing areas.

In a busy hospitality or catering environment, locker provision for staff is a practical necessity rather than an afterthought. This unit is built to handle the repeated daily use that comes with shift-based teams — doors opened and closed across multiple shifts without the kind of wear that lighter-duty lockers tend to show within a year or two. The antibacterial coating is effective against common pathogens including MRSA and E. coli, which makes it appropriate for environments where hygiene standards are closely managed, whether the changing area is wet or dry.

From an operational standpoint, the key advantages are straightforward:

• Electronic locking removes key management entirely
• Antibacterial coating supports hygiene compliance in food-sector environments
• Pre-drilled nesting holes allow units to be fixed securely to the wall or floor
• Flat top design allows units to be stacked or placed under low ceilings without wasted space
• Powder coated finish is durable and easy to wipe down

Installation is straightforward, though it is worth considering the footprint carefully before ordering. At 300mm wide per unit, a single five door column is relatively compact, but if you are planning a bank of units across a changing room wall, access to fixings at the rear and adequate floor loading should be confirmed in advance. The electronic locks will require a power source — confirm the lock type and battery or mains requirements before installation.

This locker is well suited to catering businesses, hotels, schools, and leisure facilities where staff need individual, secure storage. It works best where teams are shift-based and key management has been a persistent issue. For larger sites needing higher door counts or wider compartments, options with greater capacity are available within the range.

If you are equipping a changing area and are unsure how many doors or units you need, we are happy to talk through the layout before you commit to an order.

This is a five-compartment upright locker from Elite Lockers, finished in black powder coated steel and fitted with individual camlocks on each door. Each compartment operates independently, making it suitable for shared changing facilities where users need secure, separate storage. The sloping top is a considered design detail — it prevents flat surfaces that collect dust and debris, and discourages staff or visitors from resting bags or belongings on top of the unit.

In operational terms, the welded steel frame and reinforced doors hold up well under the daily wear that comes with busy changing environments. The antibacterial coating inhibits the spread of harmful bacteria including MRSA and E. coli, which is a practical consideration for wet or high-contact areas such as poolside changing rooms, gym facilities, and kitchen staff welfare areas where hygiene standards need to be maintained consistently.

Key operational features include:

• Sloping top prevents surface accumulation of dust and discourages misuse
• Individual camlocks on each door for independent user security
• Antibacterial powder coat finish inhibits MRSA and E. coli
• Welded steel frame construction for long-term durability in heavy-use environments
• Black finish suits neutral or dark-scheme staff and welfare areas

At just under two metres tall, this unit fits comfortably against a standard wall and requires no fixings to function, though anchoring to a wall is advisable in high-traffic areas for stability. The unit weighs 27kg, so positioning should be planned before installation rather than adjusted frequently. It is suited to locations where five users share a bank of lockers — for larger teams or higher-volume sites, a multi-bay configuration or wider locker bank may be more practical.

This locker works well in staff changing rooms for hospitality and catering operations, leisure centres, schools, and sports facilities. It is equally at home in welfare areas attached to commercial kitchens where staff storage needs to meet hygiene expectations without taking up excessive floor space.

If you are fitting out a changing area and want to discuss how many units you need, what configuration suits your space, or whether a different door count or colour would work better, we are happy to talk it through before you order.

This five-door locker unit from Elite Lockers is a straightforward, robust storage solution for staff changing areas, back-of-house spaces, and other environments where personal possessions need to be secured during working hours. Constructed from powder-coated steel with reinforced doors, the unit is built to withstand the daily wear of busy staff areas rather than offering light-duty or domestic-grade storage.

The coin return mechanism is a practical feature in high-turnover environments. Coin return systems eliminate the common problem of lost keys — the key is retained by the user until they insert the coin to release the lock, and the coin is returned when the locker is vacated and locked again. This reduces lost-key incidents and removes the need to manage a separate key inventory. The locks are compatible with both old and new £1 coins, which avoids the need to replace or recalibrate following the currency change.

The sloping top prevents items being stored on top of the unit, which supports cleanliness standards and is a common requirement in hygiene-sensitive environments. The powder-coated steel finish also carries a treatment offering resistance to MRSA and E-coli, making the unit appropriate for settings such as healthcare facilities, food production areas, and commercial kitchens where hygiene compliance is a priority.

• Five individually lockable compartments in a single freestanding unit
• Coin return locking — key retained until locker is vacated and re-locked
• Compatible with both old and new £1 coins
• Sloping top discourages storage on top of the unit
• MRSA and E-coli resistant surface treatment for hygiene-sensitive areas

At 1800mm high and 300mm wide, this is a narrow-footprint unit suited to spaces where floor area is limited. The relatively modest depth of 450mm means it can fit into corridors and ancillary rooms that would not accommodate a deeper locker bank. Weighing just under 32kg, it can be manoeuvred and positioned by two people without specialist handling equipment, though it should be secured to a wall or fixed to adjacent units once in position for stability.

This unit is well suited to single-site catering operations, small food businesses, healthcare settings, and education environments needing a modest number of staff lockers. For larger sites requiring more doors per bay or greater compartment depth, higher-capacity configurations are available within the same range.

If you are fitting out a staff area and want to discuss the right locker configuration for your space and headcount, the team is happy to help you work through the options before you order.

This five door locker unit from Elite Lockers is a straightforward, well-built storage solution for staff changing areas, back-of-house corridors, and other shared spaces where personal belongings need to be kept secure during a shift. Each of the five compartments is fitted with a coin return lock mechanism, which means the key is always returned to the user once the locker is vacated — a practical arrangement that removes the common problem of lost or unreturned keys across a busy team.

The unit is constructed from powder coated steel with a reinforced door design, giving it the kind of structural robustness that holds up well in environments where lockers take regular daily use. The black finish gives a clean, consistent appearance that works well in both back-of-house catering environments and more visible staff welfare areas. The coin return mechanism is compatible with both old and new £1 coins, so no changeover issues arise in day-to-day operation.

For operators in hygiene-sensitive settings, the unit carries a surface treatment providing resistance to MRSA and E. coli — a consideration worth noting for catering, healthcare, and education environments where contamination control is taken seriously.

• Coin return locking keeps keys accounted for across shift changes
• Powder coated steel construction suitable for demanding daily use
• Five individual compartments in a single freestanding unit
• MRSA and E. coli resistant surface treatment for hygiene-critical areas
• Compatible with current and previous £1 coin denominations

This unit suits smaller teams or spaces where a compact five-compartment arrangement is sufficient. For larger staff complements or higher-traffic environments, wider or stacked configurations may be worth considering. If you are fitting out a staff area and want to make sure you have the right quantity and configuration before ordering, the team are happy to talk it through.

This is a five door combination locker from Elite Lockers, finished in black powder coated steel with a sloping top panel. Each door is operated by a manual combination lock, removing the need for keys or padlocks. The sloping top discourages items being left on top of the unit, which is a practical consideration in any staffed changing or welfare area.

The welded steel frame construction gives these lockers a solid, stable feel that holds up well in the kind of high-footfall changing environments found in hotels, larger restaurants, contract catering operations, and leisure facilities. The antibacterial coating — effective against MRSA and E. coli — makes them a reasonable choice for both wet and dry changing areas, including those where hygiene standards are a formal requirement.

Pre-drilled nesting holes in the rear of each unit allow them to be fixed to a wall or secured together, which helps with both stability and space efficiency where changing room layouts are tight.

• Manual combination lock — no key management required
• Sloping top discourages unauthorised storage on top of the unit
• Antibacterial coating for wet or dry changing room environments
• Rear nesting holes for wall-fixing or unit-to-unit securing
• Welded steel frame for durability in high-use staff areas

At 1950mm tall with a 300mm square footprint per column, these lockers are relatively slim. They suit situations where space is limited but individual locker allocation is still required. The five door configuration provides individual storage for five users within a single unit footprint, which makes them a practical choice for smaller teams or where lockers are allocated on a shift basis.

If you are fitting out a larger changing facility or need a different configuration — more doors per column, wider compartments, or a different locking mechanism — it is worth speaking with the team before ordering. There are alternative configurations available that may better suit your specific layout or usage requirements.

If you are unsure whether this model fits your space or your site's requirements, we are happy to talk it through before you commit.

The Elite five door combination locker is a powder coated steel locker unit designed for staff changing areas in commercial kitchens, hospitality venues, and similar workplace environments. Each of the five compartments is secured by a built-in manual combination lock, removing the need for padlocks or key management. The unit is finished in black.

Built from welded steel with reinforced doors, this locker is suited to high-footfall changing areas where durability matters. The construction handles daily use reliably without the flex or wear that lighter units can develop over time. Pre-drilled nesting holes in the rear allow the unit to be secured to a wall or fixed in position, which helps where space is tight and movement needs to be controlled.

For environments where hygiene standards are a priority, the antibacterial coating offers practical reassurance. It is effective against common pathogens including MRSA and E. coli, making the unit appropriate for both wet and dry changing room conditions — a relevant consideration in catering and food production settings where staff pass between changing areas and food-safe zones.

• No key management overhead — combination locks on all five doors
• Antibacterial finish suitable for wet and dry changing environments
• Welded steel construction with reinforced doors for durability under daily use
• Rear nesting holes allow wall-fixing to make the most of available space
• Black powder coated finish — practical in appearance and resistant to general wear

At 1800mm tall and with a compact 300mm depth, this unit fits well against a wall without projecting significantly into the changing area. The powder coated steel construction keeps the weight manageable for installation, though as a tall unit it should be fixed to a solid wall surface as standard practice. No electrical or plumbing connections are required.

This locker suits smaller to medium-sized catering operations — restaurants, hotels, and contract catering sites — where a single five door unit covers a team's storage needs. For larger sites with more staff, multiple units can be banked together, or a higher door count configuration may be worth considering.

If you are fitting out a changing area and want guidance on how many doors you need or how to configure the space, the team is happy to talk it through before you order.

This five door locker from Elite Lockers is a straightforward, practical storage solution for staff changing rooms, back-of-house areas, and other commercial premises where personal belongings need to be secured. Each compartment is secured by padlock — padlocks are not supplied as standard, allowing operators to choose their own — and the unit is finished in a powder coated graphite grey that holds up well to the kind of daily use you would expect in a busy workplace environment.

The sloping top is a practical detail that makes a genuine difference over time. Flat-topped lockers collect dust, discarded items, and general debris that can be difficult and time-consuming to clear. The angled roof discourages anything being placed on top and simplifies routine cleaning, which matters in environments where hygiene standards are taken seriously.

Constructed from powder coated steel, the unit is robust enough for everyday commercial use. Pre-drilled fixing holes allow the locker to be wall-mounted for added stability, and multiple units can be nested side by side to create a bank of lockers without unnecessary gaps or movement between them. This keeps the installation tidy and reduces the risk of units shifting over time.

• Sloping top prevents debris accumulation and simplifies cleaning
• Pre-drilled holes for wall fixing or banking multiple units together
• Powder coated steel finish stands up to daily commercial use
• Five individual compartments suitable for padlocking independently
• Graphite grey finish suits most back-of-house and staff area environments

This size and configuration suits smaller staff teams or premises where space is limited. For larger teams or higher-volume sites, wider or deeper locker configurations may be more appropriate. If you are fitting out a changing room or staff area and are unsure how many doors or what configuration works best for the space, we are happy to talk it through before you order.

The Elite five door locker is a freestanding, powder coated steel storage unit designed for staff changing areas, back-of-house corridors, and similar commercial environments. Each unit provides five separate lockable compartments secured by padlock — a practical choice where individual key or coin-lock fittings are not required. The graphite grey finish gives the unit a neutral, professional appearance that sits well in both dedicated changing facilities and general staff areas.

Powder coated steel construction is the standard for commercial locker installations because it resists knocks, scratches, and the general wear that comes from daily staff use. The reinforced doors are built to handle the physical pressure of a busy environment without warping or losing alignment over time. An antibacterial coating is applied to the surfaces, which is relevant in food service settings where hygiene standards extend beyond the kitchen itself.

From a practical standpoint, the unit offers a few installation advantages worth noting:

• Pre-drilled holes allow wall-fixing to prevent movement or tipping
• Units can be nested side by side to form a bank of lockers without gaps
• Flat top design allows stacking or use of the surface for additional storage
• At 24kg, the unit can be positioned and repositioned by two people without specialist equipment

The 300mm depth is on the slimmer side for a full locker — sufficient for personal effects, footwear, and clothing, though not suited to storing bulkier items such as full outdoor coats. For sites with higher staff numbers or where deeper storage is needed, broader or taller configurations are available within the range.

This locker is well suited to catering businesses, hotels, care homes, and similar operations looking for a reliable, hygienic staff storage solution that meets commercial demands without overcomplying on cost. If you are specifying lockers for a larger installation or need advice on quantities and layout, the team is happy to help you work through the requirements before you order.

This five door locker unit from Elite combines electronic combination locking with a practical sloping top design in a graphite grey powder coated steel finish. Each of the five compartments is individually secured via an electronic lock, removing the need for keys or padlocks and reducing the administrative burden that comes with managing physical keys across a busy staff facility.

In working environments where staff numbers are high and changing room turnover is frequent — such as hotel kitchens, contract catering sites, and large hospitality venues — the electronic locking system helps keep access straightforward for individual users while maintaining security across all five bays. The sloping top is a considered design detail: it discourages items being stored on top of the unit, which is a practical advantage where cleanliness standards are a priority.

The powder coated steel construction is effective against MRSA and E. coli, making it a suitable choice for changing rooms and staff welfare areas where hygiene compliance matters. Pre-drilled rear fixing points allow the unit to be wall-anchored for stability, and multiple units can be nested side by side to make efficient use of available floor space.

• Electronic combination locks on each of the five individual doors
• Sloping top discourages surface clutter and aids cleanliness
• Powder coated finish rated effective against MRSA and E. coli
• Pre-drilled rear fixing points for wall mounting or bank installation
• Graphite grey finish suited to professional staff welfare environments

This unit is well suited to sites with moderate staff headcounts that need reliable, key-free locker provision. For larger sites requiring more doors per bay or greater storage volume per compartment, wider or deeper configurations may be worth considering.

If you are specifying lockers across a full changing room fit-out or need guidance on quantities and layouts, the team is happy to talk through the requirements before you order.

This is a five-door steel locker unit from Elite Lockers, finished in graphite grey powder-coated steel and fitted with an electronic combination lock on each door. It is designed for staff changing areas, back-of-house storage, and similar facilities where secure personal storage is needed without the ongoing cost and administration of key management.

The powder-coated finish is hardwearing and has been tested effective against MRSA and E. coli, which is a practical consideration in food service and healthcare environments where hygiene standards extend beyond the kitchen itself. The finish holds up well to the daily wear of a busy workplace without requiring special maintenance.

From an installation perspective, the unit has pre-drilled fixing points at the rear, allowing it to be wall-anchored for stability. Multiple units can also be nested side by side, which helps make efficient use of limited changing room space. At 1800mm tall and with a compact 300mm depth, it is well suited to spaces where floor area is restricted.

• Electronic combination lock removes the need for key management
• Antibacterial powder coating supports hygiene compliance
• Wall-fixing points included for secure installation
• Slim 300mm depth suits restricted changing room layouts
• Units can be nested together to maximise floor space

This locker is well suited to catering operations, care homes, leisure facilities, and similar environments where staff require secure personal storage and hygiene standards are a consideration. For larger sites requiring higher-capacity banks or different door configurations, alternative options are available within the range.

If you are fitting out a changing room or staff area and want to talk through the right configuration for your space, the team is happy to help.

This is a five-compartment personal storage locker finished in graphite grey powder coated steel, fitted with individual camlocks and a sloping top. Each of the five doors provides a separate lockable space for staff belongings, making this unit a practical solution for changing rooms, staff areas, and back-of-house spaces where personal storage needs to be secure and well organised.

The powder coated steel construction holds up well in both wet and dry environments. The coating is effective against common bacteria including MRSA and E. coli, which matters in catering and healthcare settings where hygiene standards are closely monitored. The graphite grey finish is also reasonably forgiving of everyday marks and scuffs in a working environment.

In practical terms, this locker offers a number of features that suit commercial staff areas:

• Sloping top prevents dust and debris accumulating on the unit surface
• Individual camlock on each door keeps compartments secure
• Pre-drilled rear fixing holes allow wall-mounting or units to be nested together
• Powder coated finish resists moisture and bacterial growth
• Compact footprint allows multiple units to be banked in a corridor or changing room

Installation is straightforward — the unit can be wall-fixed using the pre-drilled holes at the rear, or freestanding units can be lined up side by side. At 25kg this is a manageable weight for two people to position. The 300mm depth is relatively shallow, which suits spaces where floor area is limited, though it does mean the compartments are better suited to clothing and personal items than bulky equipment.

This locker is well suited to catering businesses, restaurants, hotels, and similar operations needing hygienic, secure staff storage in a compact footprint. For sites requiring more compartments or larger individual spaces, wider or taller configurations may be worth considering before committing to a layout.

If you're planning a changing area fit-out and want to talk through quantities, layout, or whether this specification is the right fit for your site, we're happy to help before you place an order.

This five door locker unit from Elite Lockers provides individual secure storage across five separate compartments within a single, compact steel frame. Each door is fitted with a coin return locking mechanism that accepts the current British £1 coin, making it practical for staffed or unattended environments where a deposit-and-return system removes the need for key management. The graphite grey powder coated finish gives it a clean, professional appearance that holds up well in demanding environments.

The unit is constructed from welded powder coated steel throughout, with reinforced doors and a welded plinth between compartments to maintain structural rigidity under regular use. The powder coating process used on these lockers is effective against MRSA and E. coli, which is a relevant consideration for food production, healthcare-adjacent, and hospitality settings where hygiene standards are monitored closely. The sloped top discourages items being left on top of the unit, which supports compliance with housekeeping and fire safety expectations in shared spaces.

From a practical installation standpoint, the units come with pre-drilled nesting holes, allowing multiple columns to be bolted together or fixed directly to a wall. This makes configuration straightforward whether you are fitting out a single run or a larger bank of lockers. At 25kg per unit, installation is manageable with two people.

• Coin return system reduces key management overhead in busy changing areas
• Powder coated finish supports hygiene compliance in food-adjacent environments
• Sloped top prevents accumulation of items, aiding housekeeping
• Pre-drilled nesting holes allow wall fixing or multi-unit configuration
• Reinforced doors and welded construction suit high-footfall, daily use

This unit is well suited to staff changing rooms, back-of-house areas, and leisure or hospitality facilities where five individual storage points are needed in a narrow footprint. For larger installations requiring more doors per column or wider compartments, it is worth discussing the broader range before committing to a configuration.

If you are specifying lockers for a new or refurbished facility and want to talk through layout, quantities, or suitability, the team is happy to help you work through the options.

This five-door coin return locker from Elite Lockers is a welded powder coated steel unit designed for environments where secure, organised personal storage is needed across a larger number of users. Each of the five compartments is separated by a reinforced welded plinth, and access is controlled by a coin return mechanism that accepts the current British £1 coin — a practical deterrent against casual misuse without requiring padlocks or additional hardware.

The graphite grey powder coated steel finish is harder-wearing than a painted surface and has been tested against common pathogens including MRSA and E. coli, which makes it a reasonable choice for food production sites, healthcare-adjacent environments, and anywhere hygiene standards are a consideration. The finish also holds its appearance reasonably well under the everyday knocks typical of a busy changing room.

From an installation standpoint, the unit arrives flat-topped, which allows it to be stacked or positioned flush under low ceilings. Pre-drilled nesting holes mean multiple units can be fixed together side by side or secured directly to a wall without specialist fixings. At 24kg it is manageable to position with two people, though wall fixing is advisable in higher-traffic areas.

• Coin return mechanism reduces padlock and key management overhead
• Antimicrobial powder coat finish supports hygiene compliance
• Pre-drilled nesting holes simplify multi-unit installation
• Flat top allows stacking or space-efficient placement
• Welded plinth construction adds rigidity between compartments

This unit suits staff areas in catering, hospitality, leisure, and light industrial settings where a moderate number of individual lockers are needed in a compact footprint. For sites requiring higher door counts or deeper compartments to accommodate bulkier personal equipment, a wider or taller configuration is worth considering.

If you are fitting out a changing area and are unsure whether this unit suits your layout or user numbers, we are happy to talk it through before you order.

This five door combination locker from Elite Lockers is a freestanding steel unit finished in graphite grey powder coated steel. Each of the five compartments is secured by a manual combination lock, removing the need for keys or padlocks and simplifying day-to-day management in busy staff areas. The sloping top discourages items being left on top of the unit, which helps keep changing rooms and corridors tidier.

The powder coated finish is hard wearing and has been tested against MRSA and E. coli, making these lockers a practical choice for environments where hygiene standards matter — catering operations, food production sites, healthcare facilities, and similar commercial premises where staff welfare areas are subject to regular cleaning regimes.

From a practical installation standpoint, the units arrive pre-drilled at the rear, allowing them to be wall-fixed for stability or pushed together in banks where space is limited. At 1950mm tall and a 300mm square footprint per column, they make efficient use of floor space in narrow changing rooms or corridors. The 25.5kg weight means two people should be on hand for positioning and any wall-fixing work.

• No keys required — combination locks reduce lost key issues
• Pre-drilled rear fixings allow wall mounting or banking units together
• Sloping top reduces clutter accumulation in staff areas
• Powder coated finish supports standard commercial cleaning routines
• Compact footprint suits space-limited changing or welfare rooms

These lockers are well suited to catering businesses, food production facilities, gyms, and commercial offices where a clean, low-maintenance staff storage solution is needed. For larger installations or sites requiring higher individual compartment volume, wider or deeper locker configurations may be worth considering.

If you are specifying lockers for a larger fitout or are unsure whether this configuration is the right match for your space, we are happy to talk it through before you order.

This is a five-door manual combination locker from Elite Lockers, constructed from powder coated steel and finished in graphite grey. Each of the five compartments is secured by an individual combination lock, removing the need for keys or padlocks entirely. The flat top profile keeps the unit practical in standard-height changing rooms and welfare areas.

The powder coating is applied to a hard-wearing standard that resists the kind of daily contact — knocks, cleaning products, general staff use — that changing room furniture routinely takes. The finish has also been tested as effective against MRSA and E. coli, which is a meaningful consideration in food production, healthcare, and hospitality environments where hygiene standards are taken seriously.

From a practical standpoint, the design supports flexible installation. Pre-drilled fixing points in the rear allow the unit to be secured directly to a wall for stability, and multiple units can be nested side by side to make efficient use of available floor space. That flexibility is useful when fitting out rooms of varying sizes or layouts.

• No key management required — combination locks across all five doors
• Antimicrobial powder coat finish tested against MRSA and E. coli
• Wall-fixable via pre-drilled rear fixing points
• Units can be nested together for space-efficient bank configurations
• Flat top profile suits standard changing room and welfare room heights

This locker is well suited to catering and hospitality operations, food production sites, healthcare facilities, and any workplace where a hygienic, low-maintenance staff storage solution is required. For larger installations or sites needing higher door counts per unit, it is worth considering alternative configurations from the same range.

If you are fitting out a changing room or welfare area and want to talk through quantities, layout, or suitability, the team is happy to help you work it out before you order.

This five door camlock locker from Elite Lockers is a powder-coated steel storage unit designed for staff changing rooms, washrooms, and back-of-house areas where multiple users share a single locker bank. Each of the five compartments is secured by an individual camlock, giving each user a private, lockable space without the need for padlocks or combination mechanisms. The graphite grey finish is a practical, neutral choice that holds up well in working environments.

The powder-coated steel construction is well suited to the humidity and temperature fluctuations typical of changing areas adjacent to commercial kitchens or food production spaces. The coating has been treated to resist MRSA and E. coli, which is a meaningful consideration in any food-service or healthcare-adjacent environment where hygiene standards are taken seriously. At 24kg, the unit is robust without being unmanageable to position during installation.

From an operational standpoint, the key practical advantages are:

• Five independently locked compartments from a single freestanding unit, reducing floor space per user
• Antimicrobial powder coating supports hygiene compliance in food-service environments
• Pre-drilled rear fixings allow wall mounting or back-to-back nesting for space efficiency
• Camlock mechanism requires no consumables such as padlocks or combination codes to manage
• Flat top design allows units to be stacked or have accessories placed on top

Installation is straightforward. The pre-drilled holes in the rear panel allow the unit to be fixed directly to a wall for stability, or multiple units can be nested side by side to create a longer locker run. No electrical or plumbing connections are required. It is worth considering floor levelness and wall fixings ahead of installation, particularly if units are to be loaded and wall-mounted in a busy changing area.

This locker is well suited to small to medium staff changing rooms in restaurants, hotels, care homes, and food production sites. For larger sites requiring higher-capacity locker banks or additional door configurations, it is worth considering whether a different door count or a deeper compartment would better serve the volume of staff. If you are fitting out a changing room from scratch or expanding an existing setup and are unsure which configuration makes most sense, our team is happy to talk it through with you.

This is a five-compartment electronic combination locker from Elite Lockers, finished in black powder coated steel with a sloping top. Each door is secured by an electronic combination lock, removing the need for keys or padlocks, and the sloping top panel discourages items being left on top of the unit — a practical consideration in staff areas where clutter and hygiene both matter.

The construction is powder coated steel throughout, with reinforced doors and a welded plinth between compartments. In busy back-of-house environments, where lockers take regular knocks during shift changes, the solid build holds up well without doors falling out of alignment over time. The sloping top also helps with cleaning, preventing the flat surfaces where dust and debris tend to accumulate.

Pre-drilled nesting holes in the rear of each unit allow the lockers to be fixed securely to a wall or bolted together in rows. This keeps units stable when knocked, closes off the gaps between units where dirt collects, and makes the overall installation tidier and easier to maintain.

• Electronic combination locks on each door — no keys to manage or replace
• Sloping top reduces clutter and simplifies cleaning
• Wall-fixing and nesting holes for stable, flush installation
• Powder coated steel finish stands up to daily use in staff areas
• Welded plinth construction adds rigidity between compartments

This locker bank is well suited to staff changing rooms, back-of-house areas, and hospitality or catering operations where secure personal storage is needed for multiple team members sharing a single unit. At five compartments it works well for small to mid-sized teams; for larger operations requiring higher-capacity storage, wider or taller configurations are available in the range.

If you're fitting out a changing area and want to talk through the right layout or quantities for your space, the team is happy to help you work through it before you order.

This is a five-compartment electronic locker from Elite Lockers, finished in black powder-coated steel. Each door is secured by an electronic combination lock, removing the need for keys or padlocks and reducing the day-to-day management burden on supervisors. The unit is built from welded steel throughout, with reinforced doors and a welded plinth between compartments to maintain structural integrity under regular use.

In a catering or hospitality environment, staff lockers take a fair amount of daily wear — doors pushed hard, units nudged by trolleys, constant opening and closing across multiple shifts. The steel construction and reinforced door design hold up well in that context. The black powder-coated finish is reasonably resilient and keeps its appearance longer than cheaper painted alternatives, though like any locker finish it will mark over time in high-traffic areas.

Pre-drilled nesting holes in the rear of each unit allow the lockers to be fixed flush to a wall or bolted in rows, which eliminates gaps between units where dust and debris can accumulate. This makes routine cleaning straightforward and reduces movement if a unit is knocked or leant against. Practical advantages include:

• Electronic locking removes the cost and admin of key management
• Wall-fixable rear prevents units shifting during daily use
• Close-coupled row installation simplifies cleaning routines
• Welded plinth construction adds rigidity across the full unit
• Black finish suits both back-of-house and staffroom environments

At 1800mm tall and 300mm wide per unit, this locker fits a standard five-door column into a relatively compact footprint, making it workable in smaller staffrooms or changing areas where space is limited. It is worth measuring your available wall run carefully before ordering, particularly if you intend to fix multiple units in a row. The unit weighs 25kg, so two people are advisable for positioning and wall-fixing.

This model is well suited to catering operations, hotels, leisure facilities, and similar environments where secure personal storage is needed for front-of-house or back-of-house staff. For larger teams requiring more compartments, wider units or multi-bank configurations may be more practical.

If you are fitting out a staffroom or changing area and want to talk through quantities, layout, or fixing options, the team is happy to help you get the specification right before you commit.

This Elite five door locker unit provides individual lockable storage compartments within a single powder coated steel frame, finished in black. Each compartment is secured by a coin return mechanism, which allows users to retrieve their coin on removal of the key — a practical arrangement that reduces lost key incidents and avoids ongoing padlock management in high-footfall environments.

In busy settings such as leisure centres, sports facilities, schools and workplace changing areas, these lockers hold up well under daily repeated use. The welded plinth and reinforced door construction contribute to a unit that resists the knocks and wear typical of environments where lockers are used by many different people throughout the day. The anti-bacterial coating applied to the steel frame is a considered feature for environments where hygiene standards matter, such as healthcare facilities or food-handling workplaces.

From a practical standpoint, the sloped top serves a dual purpose: it sheds dust and moisture easily, and it discourages users from placing bags or equipment on top of the unit — which helps maintain clear walkways and reduces the risk of items being left unattended.

• Coin return locking mechanism reduces key loss and management overhead
• Anti-bacterial steel coating suited to hygiene-sensitive environments
• Sloped top prevents surface storage and simplifies cleaning
• Pre-drilled rear nesting holes allow straightforward wall anchoring
• Compatible with the current British £1 coin

At 1,950mm tall and 300mm wide per unit, this locker is well suited to spaces where floor area is limited but vertical clearance is available. The 25kg unit weight makes positioning manageable, though wall fixing is recommended for stability in public-facing areas. The relatively shallow 300mm depth suits standard changing room alcoves and corridor-adjacent installations, though it is worth confirming available depth before ordering.

This unit is a practical choice for schools, leisure facilities, gyms, offices and light industrial environments where straightforward coin return storage is needed without the complexity of electronic locking systems. Sites requiring wider compartments, greater depth, or a higher number of doors per unit may find a larger or differently configured model more appropriate for their needs.

If you have questions about fitting these into an existing bank of lockers, or want to discuss the right configuration for your space, the team is happy to help.