Sleek, Aluminium and Stainless

The Boston Sleek large round bar height table base is a steel pedestal base finished in matte black with a gold collar accent on the column. It is designed for indoor use at bar or standing height, and is compatible with round or square table tops within the supported size range. The round flat base provides a stable footprint and the column carries a practical aesthetic that suits contemporary bar and dining environments.

For hospitality settings, this base is well suited to bar counters, high-top dining areas, and casual standing-height dining spaces. The adjustable feet allow the base to be levelled on slightly uneven floor surfaces, which is a practical consideration in older premises or venues with tiled floors that are not perfectly flat. The base is intended for indoor use only and is not suited to covered outdoor terraces or areas exposed to moisture.

Practical points worth noting before ordering:

• Adjustable feet for levelling on uneven indoor surfaces
• Compatible with round tops up to 760mm diameter or square tops up to 800x800mm
• Matte-black steel finish with contrasting gold collar detail
• Fixed bar height — not adjustable in use
• Indoor use only; not rated for outdoor or high-moisture environments

This base is best suited to bars, cocktail lounges, restaurant high-top areas, and similar indoor hospitality venues where a clean, contemporary aesthetic is required. It is a single-column base, so operators planning very large or heavy table tops should confirm suitability. For projects requiring multiple bases or bespoke table configurations, it is worth speaking with the team to confirm the right specification before placing an order.

The Boston Sleek large round dining table base is a steel pedestal base finished in matte black with a gold collar detail at the column. It is designed for indoor use in restaurants, cafés, bars, and similar hospitality venues where a clean, contemporary look is required at the table.

The base is built to support round or square table tops within the stated size range, and the adjustable feet allow it to sit level on uneven or slightly irregular floor surfaces — a practical consideration in older premises or tiled floors where perfectly flat ground cannot always be guaranteed.

From an operational standpoint, this type of single-column base keeps the floor area around the table clear, which helps with seating, cleaning, and repositioning tables for different covers. The finish is well suited to modern interiors where contrast detailing is part of the scheme.

• Adjustable feet for levelling on uneven floors
• Single-column design keeps floor space clear for cleaning and access
• Matte-black and gold finish suits contemporary hospitality interiors
• Compatible with round tops up to 760mm diameter or square tops up to 800mm x 800mm

It is worth bearing in mind that this base is rated for indoor use only and carries a maximum load capacity, so it is not appropriate for particularly heavy solid-surface tops or outdoor terrace settings. For venues needing a more heavy-duty or outdoor-rated solution, there are alternative bases worth considering.

If you are fitting out a dining area and want to make sure the base works with your chosen top and floor type, the team is happy to talk it through before you order.

The Boston Sleek large round mid-height table base is a steel pedestal base finished in matte black with a gold collar detail at the column. It is designed for indoor use in hospitality and dining environments where a clean, contemporary aesthetic is required without compromising on stability.

The base is built to support round tops up to 760mm in diameter or square tops up to 800mm x 800mm, making it a practical choice for standard café and restaurant table configurations. Adjustable feet allow for levelling on uneven or slightly irregular floor surfaces, which is a common practical requirement in older premises or venues with tiled floors.

From an operational standpoint, the key advantages are straightforward:

• Consistent aesthetic across a dining floor when paired with matching tops
• Adjustable feet reduce rocking without shimming or modification
• Matte black finish is relatively forgiving in terms of surface marks during daily service
• Mid-height column suits standard dining chair height rather than bar or counter seating
• Round base profile minimises trip hazard in tighter table layouts

It is worth noting that this base is rated for indoor use only and is not suited to covered outdoor terraces or areas with significant moisture exposure. The 30kg maximum load capacity is adequate for most standard table tops, but heavier solid wood or stone tops should be checked against this limit before ordering.

This base suits cafés, restaurants, and hospitality venues looking for a consistent, presentable floor finish at a sensible price point. For sites requiring heavier-duty construction or outdoor-rated bases, alternative options in the range may be more appropriate.

If you are furnishing a larger space and want to discuss top-and-base compatibility or layout, the team is happy to help you work through the options before you commit.

The Boston Sleek large round coffee table base is a steel pedestal base finished in matte black with a gold collar detail on the column. It is designed for indoor use at coffee table height, making it a practical choice for lounge areas, reception spaces, hotel lobbies, and casual dining or bar environments where low-level seating arrangements are required.

The base is built to support a range of table tops and is suited to round tops up to 760mm in diameter or square tops up to 800mm x 800mm, giving operators reasonable flexibility over the top they pair it with. The adjustable feet allow the base to be levelled on uneven or tiled surfaces, which is a common practical requirement in older or refurbished venues.

From an operational standpoint, the key advantages are straightforward:

• Low-profile coffee table height suits lounge and casual seating layouts
• Adjustable feet compensate for uneven floors without shimming
• Matte-black and gold finish is well suited to contemporary hospitality interiors
• Compatible with a range of standard round and square top sizes
• Steel construction provides adequate stability for light-use indoor settings

It is worth noting that this base is rated for indoor use only and carries a moderate weight capacity, so it is best suited to lighter table tops and low-traffic lounge settings rather than high-turnover dining areas where heavier-duty bases would be more appropriate. If your venue requires bases for busier dining spaces or outdoor terraces, there are alternative options worth considering.

If you are fitting out a lounge area or selecting bases to complement a specific table top, we are happy to help you confirm suitability before you order.

The Boston Sleek small round mid height table base is a steel pedestal base finished in matte black with a gold collar detail at the column. It is designed for indoor use at counter or bar height, providing a stable, freestanding support for round or square table tops within the specified size range.

In a hospitality setting, mid height bases like this are commonly used at high-seating areas — alongside bar stools or poseur seating — where they need to hold up reliably through consistent daily use. The adjustable feet allow the base to be levelled on slightly uneven floor surfaces, which is a practical consideration in older venues or spaces with tiled floors that are not perfectly flat.

The black and gold finish suits venues where a contemporary or industrial-influenced aesthetic is part of the interior brief. From an operational standpoint, the key practical points are:

• Adjustable feet compensate for minor floor unevenness
• Round flat base footprint keeps the floor area manageable in tighter layouts
• Matte black finish resists showing everyday marks and handling wear
• Compatible with a range of standard round and square table tops
• Steel construction provides consistent stability for front-of-house use

This base is suited to cafés, bars, restaurant high-seating sections, and similar front-of-house environments where appearance matters alongside practicality. It is intended for indoor use only and is not suitable for outdoor or covered terrace settings where exposure to moisture is likely. If you are furnishing a larger space or need a heavier-duty option for high-turnover venues, alternative bases with a greater weight capacity may be worth considering.

If you are specifying bases across a fit-out or need to match an existing table top size, feel free to get in touch — we are happy to help confirm compatibility before you order.

The Boston Sleek small round mid-height table base is a steel column base finished in matte black with a gold collar detail at the column joint. It is designed for indoor hospitality use and suits counter-height seating arrangements — the kind of setup commonly found at café bars, cocktail venues, and informal dining areas where standard table height would feel too low and full bar height too tall.

The round flat base provides a stable footing on hard floor surfaces, and the adjustable feet allow for straightforward levelling on surfaces that are not perfectly flat — a practical consideration in older buildings or tiled floors where slight undulation is common. It is designed to support round or square table tops within the dimensions noted in the product specifications.

From an operational standpoint, the key practical points are:

• Adjustable feet compensate for uneven floor surfaces without shimming
• Matte black and gold finish suits a range of contemporary interior schemes
• Compact base footprint works well in tighter floor layouts
• Steel construction provides reliable day-to-day stability under normal hospitality use
• Designed for indoor use only — not rated for outdoor or covered terrace environments

This base is best suited to lower-volume hospitality settings such as cafés, wine bars, hotel lobbies, or breakout areas where mid-height seating adds variety to a floor plan. It is not intended for heavy-duty contract environments where bases are subject to constant repositioning or significant lateral force. For higher-traffic venues, a heavier-duty base option may be worth considering.

If you are fitting out a space and want to talk through which base configuration works best for your table tops and floor layout, the team is happy to help you work through the options before you order.

The Boston Sleek table base is a steel pedestal column designed for use with small round or square dining table tops in indoor commercial and hospitality settings. The matte-black finish is complemented by a gold collar at the column, giving it a cleaner, more considered look than standard utility bases — suitable for venues where front-of-house appearance matters alongside practicality.

Built for indoor use, this base is well suited to cafés, restaurants, hotel dining rooms, and similar settings where tables see regular daily use. The construction handles the routine demands of a busy dining floor without being an industrial-grade unit, making it a practical choice for mid-volume covers rather than high-turnover operations with heavy furniture movement.

From an operational standpoint, the key practical points are:

• Adjustable feet allow levelling on uneven or tiled floors — useful in older premises
• Compatible with round tops up to 750mm diameter or square tops up to 700mm x 700mm
• Compact base footprint suits tighter table spacing without creating a trip hazard
• Matte-black and gold finish works well in contemporary or industrial-style dining interiors
• Indoor use only — not rated for covered outdoor or terrace environments

It is worth confirming your table top fixings and weight before ordering. This base has a stated maximum load capacity, so heavier solid-wood or stone tops should be checked against that figure. If your venue uses larger table tops or requires bases that can take more demanding daily use, there are heavier-duty options worth considering.

If you are fitting out a number of tables and want to make sure the base suits your top, floor surface, or overall scheme, feel free to get in touch with the team before placing your order.

The Boston Sleek small round coffee table base is a compact, steel-constructed pedestal base finished in matte black with a decorative gold collar on the column. It is designed for indoor use at coffee table height and is compatible with round or square tops within the supported size range, making it a practical choice for lounge areas, waiting rooms, bar areas, and casual dining spaces.

The base is built to handle light everyday use in hospitality and commercial environments. The single-column design keeps the footprint modest, which suits tighter floor plans where space between seats is limited. The adjustable feet allow the base to sit level on slightly uneven flooring — useful in older buildings or tiled surfaces where perfect levelness is not always guaranteed.

• Matte-black steel construction with gold collar detail for a consistent, considered finish
• Adjustable feet to compensate for minor floor unevenness
• Suitable for round tops up to 750mm diameter or square tops up to 700mm x 700mm
• Low-profile coffee table height suits lounge and casual seating layouts
• Compact base diameter keeps circulation space clear in tighter areas

It is worth noting that this base is rated for indoor use only and carries a modest weight capacity, so it is best paired with lightweight tops such as laminate or thin timber rather than heavy stone or solid hardwood surfaces. For higher-traffic sites or outdoor terraces, a heavier-duty base with a larger footprint and higher weight rating would be more appropriate.

This base suits cafés, hotel lounges, waiting areas, and casual hospitality settings where a clean, contemporary aesthetic is needed alongside practical functionality. If you are specifying several tables and want to confirm top compatibility or discuss quantity requirements, the team is happy to help before you order.

The Boston Sleek large rectangular bar height table base is a steel pedestal base finished in matte black with a gold collar detail on the column. It is designed for indoor use in bar and dining environments where a standing or bar-height seating arrangement is required, and it is sized to support larger rectangular table tops.

In practice, this type of base suits venues running bar counters, high-top dining areas, or casual standing spaces where throughput matters and full seating is not the priority. The rectangular footprint offers more stability under wider table tops than a round base, which is a practical consideration when covers are close together or when guests are leaning against the table edge.

A few points worth considering before specifying this base:

• Designed for indoor use only — not suited to covered outdoor terraces or areas with moisture exposure
• Adjustable feet allow levelling on slightly uneven floor surfaces
• The rectangular base suits wider table tops that would be less stable on a single round foot
• The matte black and gold finish suits contemporary bar and hospitality interiors
• Confirm your table top fixing pattern is compatible before ordering

This base works well for bars, casual dining venues, hotels, and event spaces fitting out high-top areas. It is a single-column base, so for very large or heavy commercial table tops, or for high-traffic venues with significant lateral load, it is worth considering a heavier-duty or multi-leg alternative.

If you are specifying several bases for a new or refurbished space and want to confirm suitability with your chosen tops, our team is happy to talk through the options with you.

The Boston Sleek large rectangular mid-height table base is a steel pedestal base finished in matte black with a gold collar detail at the column. It is designed for indoor use in hospitality settings where a consistent, presentable aesthetic matters — restaurant dining rooms, café floors, bar areas, and similar front-of-house environments.

The rectangular footprint provides a stable platform for larger table tops, making it a practical choice where square or round bases would compromise legroom or seating configuration. Adjustable feet allow the base to sit level on uneven or slightly irregular floor surfaces, which is a common practical concern in older buildings and period venues.

From an operational standpoint, this base suits settings where appearance and durability need to work together. The matte-black and gold finish holds up reasonably well in normal front-of-house conditions, though as with any decorative metalwork, care should be taken to avoid harsh cleaning chemicals that could affect the finish over time.

• Stable rectangular base well suited to larger rectangular table tops
• Adjustable feet for levelling on uneven surfaces
• Matte-black finish with gold collar detail for a consistent front-of-house look
• Designed for indoor use in dining, café, and bar environments

It is worth confirming that your chosen table top is within the supported size range before ordering, and that the mid-height column suits your intended seating style — this base is not designed for bar-height or counter-height applications. If you are furnishing a larger site or have specific layout requirements, it is worth having a conversation with us before committing to quantities.

The Boston Sleek large rectangular dining table base is a steel pedestal base finished in matte black with a gold collar detail on the column. It is designed for indoor commercial dining environments where a consistent, presentable table setup is needed across a dining room or hospitality space.

The rectangular footprint provides stable support for larger table tops, and the adjustable feet allow for straightforward levelling on uneven or slightly imperfect floor surfaces — a practical consideration in older buildings or spaces where flooring is not perfectly uniform. The matte-black and gold finish is understated enough to work alongside a range of table top materials and interior schemes without demanding a specific design direction.

From an operational standpoint, this type of base suits venues that need a reliable, low-maintenance furniture solution. Key practical points include:

• Adjustable feet for levelling on uneven floors
• Rectangular base suited to larger dining table tops
• Matte-black steel construction with decorative gold collar detail
• Indoor use only — not suitable for covered outdoor terraces or humid environments
• Compatible with table tops up to the supported size range

It is worth confirming that your chosen table top is within the supported weight and size range before ordering. This base is intended for indoor use only and should not be used in exposed or high-humidity settings. For venues requiring heavier-duty bases or different footprint configurations, alternative options within the range may be more appropriate.

If you are furnishing a larger dining room and want to confirm the right base and top pairing for your layout, we are happy to talk it through before you place an order.

The Boston Sleek large rectangular coffee table base is a steel pedestal base finished in matte black with a gold collar detail on the column. It is designed for indoor use in hospitality and casual dining environments where a consistent, contemporary aesthetic is needed at low seating level.

Built to support table tops up to 1500mm x 900mm, the base is suited to lounge areas, bar seating zones, and waiting areas where guests are seated on sofas or low chairs. The rectangular footprint provides a stable platform for larger tops without the overhang issues that can occur with a single central column on an oversized surface.

From a practical standpoint, the base offers a few straightforward operational advantages:

• Adjustable feet allow levelling on uneven or tiled surfaces without shimming
• The matte-black finish is reasonably resistant to scuffing in normal indoor use
• The gold collar detail coordinates with current hospitality interior trends without committing to a single design direction
• The rectangular base spreads the load effectively beneath larger tops

This base is intended for indoor use only and is not suitable for outdoor or covered terrace settings where moisture exposure is likely. It carries a stated maximum weight capacity, so top material selection — particularly for heavier solid wood or stone tops — is worth checking before ordering.

Well suited to hotel lounges, café seating areas, and restaurant waiting zones. For high-traffic venues where bases take frequent knocks from cleaning equipment or furniture rearrangement, it is worth considering whether a heavier-duty cast-iron option would offer better long-term durability.

If you are specifying bases across a larger refurbishment or are unsure about top compatibility and weight, the team is happy to talk through the options with you.

The Boston Sleek bar height table base is a steel pedestal base finished in matte black with a gold collar detail at the column. It is designed for indoor use at bar or counter height, and is intended to support rectangular table tops. The adjustable feet allow the base to be levelled on uneven floor surfaces, which is a practical consideration in older buildings or venues with tiled or uneven flooring.

This base is well suited to bars, cocktail lounges, hotel lobbies, and casual dining venues where standing or high-stool seating is part of the layout. The profile is relatively compact, which helps keep floor space clear in areas with high footfall. The black and gold finish gives it a cleaner, more considered look than plain chrome alternatives, and it tends to suit contemporary or industrial interior schemes well.

A few practical points worth noting before ordering:

• Intended for indoor use only — not suitable for covered outdoor terraces or areas exposed to moisture
• Adjustable feet help manage minor floor irregularities
• Designed to accept rectangular tops within the supported size range
• Steel construction with a decorative finish — not a heavy-duty commercial dining base designed for very high turnover use

This base is a reasonable choice for lower-volume venues or areas where aesthetics are as important as durability. For busier environments with very high table turnover, it is worth considering whether a heavier-duty base would better suit the demands of the space.

If you are fitting out a venue and want to talk through table base options relative to your floor plan or seating style, we are happy to help.

The Boston Sleek small rectangular mid-height table base is a steel pedestal base finished in matte black with a gold collar detail on the column. It is designed for indoor use and sits at a mid-height position, making it well suited to bar-height or poseur-style seating arrangements where a standard dining height would be too low. The rectangular footprint provides a stable platform without the spread of a larger cross-base design, which is useful where floor space is tight or where a cleaner sightline across a floor is important.

In a front-of-house environment, the finish holds up reasonably well under normal service conditions, though it is worth noting that this base is intended for indoor use only and should not be used in covered outdoor areas where moisture or temperature fluctuations could affect the finish over time. The adjustable feet allow the table to be levelled on uneven or slightly cambered floors, which is a practical consideration in older buildings or venues with tiled or flagged flooring.

• Matte-black steel column with decorative gold collar for a considered, contemporary look
• Rectangular base keeps the footprint compact without sacrificing stability
• Adjustable feet compensate for uneven floor surfaces
• Suitable for table tops up to 1200mm x 800mm
• Indoor use only — not suitable for covered terraces or outdoor settings

This base is best suited to cafés, wine bars, cocktail lounges, and restaurant front-of-house areas where a poseur or mid-height seating arrangement is part of the layout. It works well in smaller footprint settings where a slimmer base profile is preferable to a wider splayed design. Operators fitting out larger or higher-turnover floor spaces may want to consider a heavier-duty base with a greater weight capacity.

If you are unsure whether this base suits your top size, seating height, or floor type, we are happy to talk it through before you order.

The Boston Sleek small rectangular dining table base is a steel pedestal base finished in matte black with a gold collar detail on the column. It is designed for indoor use in dining rooms, cafés, bars, and similar hospitality settings, and is built to support rectangular table tops in the small-to-mid size range.

The base is well suited to front-of-house environments where a consistent, presentable finish matters. The two-tone black and gold aesthetic works across a range of interior styles without being overly decorative, and the matte-black powder coat is reasonably practical to keep clean in daily service conditions.

From an operational standpoint, the adjustable feet are a useful feature in real venues where floors are rarely perfectly level. Being able to set the table stable without resorting to folded cardboard or shims is a small but worthwhile detail in a busy dining area.

• Adjustable feet for levelling on uneven surfaces
• Matte-black finish with gold collar detail suits a range of interior styles
• Designed for indoor hospitality use in cafés, bars, and dining rooms
• Steel construction provides adequate stability for a table base at this size

This base is suited to smaller table configurations and lighter-use settings. For larger table tops or higher-turnover environments where heavier construction may be preferable, it is worth considering a more heavy-duty option from the range.

If you are fitting out a dining space and want to confirm this base is the right choice for your table top size or floor type, the team is happy to help you work through it.

The Boston Sleek small rectangular coffee table base is a steel pedestal base finished in matte black with a gold collar detail at the column. It is intended for indoor use as a low-level coffee table or lounge table base, pairing with a separate table top to complete the furniture piece.

The base sits at a lower height suitable for coffee table applications, making it a practical choice for lounge areas, waiting areas, hotel lobbies, and café seating zones where guests are seated on sofas or low chairs rather than standard dining chairs. The adjustable feet allow for levelling on slightly uneven flooring, which is a useful practical feature in older premises where floors are not perfectly flat.

From an operational standpoint, the base offers a straightforward, presentable appearance without heavy maintenance requirements. The matte-black finish is reasonably forgiving of everyday scuffs in a hospitality environment, and the gold collar adds a degree of considered detail that suits contemporary café and bar interiors without being overstated.

• Adjustable feet for levelling on uneven surfaces
• Matte-black steel construction for everyday durability
• Gold collar detail suits contemporary hospitality interiors
• Suitable for lounge, café, and waiting area settings
• Designed for indoor use with a separate table top

This base is suited to lower-footfall lounge and café environments rather than high-turnover dining areas where a heavier-duty base with a greater weight tolerance may be more appropriate. It is worth confirming your intended table top size and weight before ordering to ensure compatibility.

If you are fitting out a larger space or need guidance on matching bases to table tops across different seating zones, the team are happy to help you work through the options.

The Boston Sleek large square bar height table base is a steel pedestal base designed for bar-height table settings in indoor hospitality environments. It features a matte-black column finish with a gold collar detail, giving it a clean, contemporary appearance that works well in bars, restaurant bar areas, and casual dining spaces where a smarter aesthetic is expected without straying into overly decorative territory.

The square footprint provides stable support for larger table tops, and the base is designed to accommodate tops up to 900mm x 900mm square or up to 1000mm in diameter. Adjustable feet allow the base to be levelled on uneven or tiled flooring, which is a practical consideration in older or refurbished premises where perfectly level floors cannot be guaranteed.

From an operational standpoint, the key practical advantages are straightforward:

• Adjustable feet compensate for uneven floors without shimming or remedial work
• Black and gold finish suits contemporary bar and dining fit-outs
• Square base geometry works well in row or grid seating layouts
• Compatible with a range of standard large-format table tops

It is worth noting that this base is specified for indoor use only and carries a stated maximum top weight capacity. Operators fitting heavier solid-surface or stone tops should verify compatibility before ordering. For lighter-duty or smaller-format requirements, lower-capacity bases are available; for high-footfall sites requiring greater robustness, heavier-duty options may be worth considering.

This base suits bars, casual dining rooms, and hospitality venues looking for a consistent, modern table furniture scheme. If you are fitting out a larger space or mixing base types across a floor plan, the team is happy to talk through what will work best for your layout.

The Boston Sleek large square mid-height table base is a steel dining base finished in matte black with a gold collar at the column junction. It is designed for indoor use in cafés, restaurants, bars, and similar hospitality venues where a consistent, presentable aesthetic matters alongside practical durability.

The square footprint provides stable support and works well in environments where tables need to sit flush to walls or be arranged in rows without wasted floor space. Adjustable feet allow the base to compensate for uneven flooring, which is a common practical requirement in older premises or venues with tiled or stone floors that aren't perfectly level.

From an operational standpoint, this base suits venues that want a clean, contemporary look without investing in bespoke furniture. The matte-black and gold finish reads well in both modern and more traditional interiors, and the steel construction handles the everyday demands of a busy dining room reasonably well at this price point. Key practical points worth noting:

• Adjustable feet compensate for uneven floor surfaces
• Square base suits wall-side placement and row arrangements
• Compatible with round tops up to 1000mm and square tops up to 900mm x 900mm
• Matte-black finish with gold collar suits a range of interior styles
• Indoor use only — not rated for outdoor or covered terrace environments

It is worth confirming that your chosen table top is rated to sit within the supported size and weight limits before ordering, particularly if you are specifying heavier stone or solid-wood tops. If you are fitting out a larger number of covers or need a heavier-duty base for high-turnover sites, a more robust option from the range may be worth considering.

If you are unsure whether this base is the right fit for your tables or your venue layout, we are happy to help you work through the options.

The Boston Sleek large square dining table base is a steel pedestal base finished in matte black with a gold collar detail at the column. It is designed for indoor use in restaurants, cafés, bars, and similar hospitality environments where a consistent, presentable table setup is needed without the maintenance demands of more ornate furniture.

In practical terms, this is a straightforward, fixed-height base intended for front-of-house use. The square footprint provides stable support for larger table tops, and the adjustable feet allow the base to sit level on slightly uneven floors — useful in older buildings or venues with tiled surfaces that are not perfectly flat. It is rated to support table tops up to 900mm x 900mm square or 1000mm round, which covers most standard two- to four-cover dining configurations.

From an operational standpoint, the key considerations are:

• Matte black steel finish is straightforward to wipe down during and between services
• Adjustable feet reduce the need for wedges or folded cardboard under legs
• Gold collar detail adds a visual finish suited to smarter casual dining and bar settings
• Square base profile works well against banquette seating or in defined table zones
• Indoor-only — not rated for covered outdoor terraces or areas with significant moisture exposure

This base is best suited to venues furnishing a dining room or bar area where a clean, contemporary aesthetic is the goal. It is not a heavy-contract piece intended for very high-turnover environments where bases are moved and reset constantly throughout the day — for that level of use, a heavier-gauge or cast-iron base would be worth considering.

If you are furnishing multiple covers or want to confirm the base suits the top you have in mind, our team are happy to talk it through before you order.

The Boston Sleek large square coffee table base is a steel pedestal base finished in matte black with a gold collar detail on the column. It is designed for indoor use at coffee table height and is compatible with square or round table tops up to 900mm x 900mm or 1000mm in diameter, making it a practical choice for lounge seating areas, reception spaces, and hospitality venues where low-level tables are required.

The base is built from steel with a square footprint, providing a stable platform for casual seating arrangements. Adjustable feet allow the table to sit level on uneven or slightly irregular floor surfaces, which is a common practical consideration in older or refurbished venues. The gold collar adds a degree of visual distinction without being overly decorative, suiting venues that want a contemporary finish without a premium price point.

It is worth noting that this base is rated for indoor use only and carries a defined maximum weight capacity, so top selection should take that into account — particularly if opting for heavier stone or solid wood tops. For venues requiring bases suited to heavier tops or outdoor terraces, alternative options within the range are worth considering.

If you are fitting out a lounge area or breakout space and want to confirm compatibility with a particular top, our team is happy to help you work through the options.

The Boston Sleek small square bar height table base is a steel pedestal base finished in matte black with a gold collar detail at the column. It is designed for indoor use in hospitality environments where a standing or bar-height table arrangement is required, supporting table tops up to 600mm square or 600mm in diameter.

In practical terms, this is a straightforward, fixed-height base suited to bar areas, high-seating sections, and café or restaurant spaces where a consistent 1080mm table height is appropriate for the seating arrangement. The adjustable feet allow for levelling on slightly uneven floor surfaces, which is useful in older premises where floors are rarely perfectly flat.

Key practical points to consider:

• Matte black finish with gold collar — suits contemporary bar and hospitality interiors
• Adjustable feet help compensate for uneven floor surfaces
• Designed to support table tops up to 600mm square or round
• Fixed bar height column — not adjustable, so confirm the height suits your seating before ordering
• Rated for indoor use only

This base is best suited to lower-footfall bar or café settings rather than high-turnover dining rooms where heavier, more robust bases would be more appropriate. The 25kg maximum table top weight capacity means it is compatible with most standard laminate or compact laminate tops of this size, but heavier solid timber or stone tops should be checked against that limit before specifying.

If you are fitting out a larger space, mixing table heights, or need guidance on pairing the right top with this base, the team is happy to talk it through with you.

The Boston Sleek small square mid-height table base is a steel column base finished in matte black with a gold collar detail on the column. It is designed for indoor use at a mid-height standing, bridging the gap between standard dining height and bar height — making it a practical choice for casual dining areas, café counters, and bistro-style seating arrangements where a slightly elevated table suits the layout.

The square foot profile provides a stable platform and is well suited to fixed or semi-fixed floor arrangements. Adjustable feet allow the base to sit level on slightly uneven surfaces, which is useful in older venues or those with tiled floors where minor undulations are common. The base is rated to support table tops up to 600mm square or 600mm in diameter, keeping it appropriate for compact two-person covers rather than larger shared tables.

From an operational standpoint, this base works well where appearance matters alongside practicality. The black and gold finish is a considered choice for venues with a contemporary or industrial aesthetic, and the column profile is slim enough not to intrude on legroom in tighter seating configurations.

• Adjustable feet for levelling on uneven floor surfaces
• Compatible with square or round tops up to 600mm
• Slim column profile reduces legroom obstruction
• Matte-black steel with gold collar suits contemporary interiors
• Designed for indoor use in hospitality environments

This base is best suited to cafés, bars, wine bars, and casual dining venues looking to achieve a consistent aesthetic across their floor. It is not intended for outdoor use or heavy-traffic environments where a heavier-gauge or fully welded base would be more appropriate.

If you are fitting out a room or are unsure whether this base pairs correctly with a particular top, the team is happy to talk through what will work best for your space.

The Boston Sleek small square dining table base is a steel pedestal base designed for indoor dining use in cafés, restaurants, and hospitality venues. The column features a matte-black finish with a gold collar detail, giving it a clean, contemporary appearance that sits well in modern dining environments without looking out of place in more traditional settings.

The base is designed to support table tops up to 600mm in diameter or 600mm x 600mm, making it well suited to two-cover dining tables. Adjustable feet allow the base to be levelled on uneven or tiled floors, which is a practical consideration in many older or converted premises where perfectly level surfaces are not guaranteed.

From an operational standpoint, this base offers a few straightforward advantages for hospitality use:

• Compact square footprint helps maximise covers in tighter floor layouts
• Adjustable feet reduce wobble on uneven surfaces, minimising spillage risk during service
• Matte-black and gold finish resists showing minor marks and suits a range of interior schemes
• Steel construction provides reliable day-to-day durability under regular use

It is worth noting that this base is intended for indoor use only and carries a maximum weight capacity of 25kg, so it is important to check that any table top selected falls within that limit. It is not designed for heavy-duty contract environments where bases may be subjected to frequent moving or stacking.

This base is a practical choice for smaller café or restaurant settings, pop-up dining, or venues fitting out a compact dining area. For larger table tops or higher-traffic sites requiring a more robust specification, it is worth considering a heavier-duty alternative from the range.

If you are fitting out a dining area and want to talk through table base and top combinations before ordering, we are happy to help.

The Boston Sleek small square coffee table base is a steel pedestal base finished in matte black with a gold collar detail on the column. It is designed for indoor use at coffee table height, pairing with square or round tops for use in cafés, lounges, hotel lobbies, breakout areas, and similar hospitality settings.

The base is built to support table tops up to 600mm round or 600mm square, making it a practical choice for small seating arrangements where space is at a premium. Adjustable feet allow the table to sit level on uneven or slightly irregular floor surfaces, which is useful in older buildings or venues with textured flooring.

• Matte-black steel construction with gold collar accent on the column
• Adjustable feet to compensate for uneven floor surfaces
• Suitable for round or square tops up to 600mm
• Low-profile coffee table height for lounge and reception use
• Designed for indoor use in hospitality environments

This base is best suited to lower-footfall lounge areas, hotel lobbies, and café seating zones rather than high-turnover dining rooms where a heavier-duty base may be more appropriate. It is an indoor-only product and is not rated for external or covered outdoor use.

If you are specifying tables across a larger scheme or are unsure whether this base pairs correctly with a particular top, our team is happy to assist with the selection.

The Bolero square table base is a straightforward, well-constructed pedestal base finished in grade 304 stainless steel. It is designed to support a wide range of commercial table tops, making it a practical choice where operators want flexibility across different surface finishes or need to replace a base without committing to a matched set.

In practice, stainless steel bases of this type are commonly used in cafés, restaurants, hotel dining rooms, and staff canteens where durability and ease of cleaning matter more than decorative detail. The grade 304 steel holds up well in busy front-of-house environments and resists the routine wear that comes with daily cleaning and repositioning.

From an operational standpoint, the square footprint offers a degree of stability that suits fixed or semi-fixed floor plans. Key practical points worth considering:

• Grade 304 stainless steel resists corrosion and is straightforward to wipe down
• Compatible with a broad range of commercial table top brands, including laminate and compact exterior surfaces
• Square base geometry suits straight-row layouts and back-to-back table arrangements
• Solid construction handles the everyday knocks of a busy dining environment
• Neutral finish works across most front-of-house aesthetics

At just over 12kg, the base is substantial enough to feel stable underfoot but light enough for repositioning during a deep clean or layout change. One consideration worth noting is that the 400mm square footprint, while well suited to two- and four-cover tables, should be checked against your chosen table top size to confirm the overhang is acceptable for your setting.

This base suits most mid-sized dining operations. If you are fitting out a high-turnover environment with heavier tops or need something configured for outdoor use, it is worth discussing the options with us before ordering.

This is a round pedestal table base from Bolero, constructed in polished stainless steel and designed to pair with Bolero's range of pre-drilled table tops. It is a straightforward, practical component for operators furnishing a dining area — whether that's a restaurant floor, a café terrace, or a hospitality space that sees regular use.

Stainless steel is a sensible material choice for a table base in commercial settings. It resists corrosion and weathering, which makes this base equally usable outdoors on a patio or terrace as it is inside. At just under 18kg, it carries enough mass to provide solid, stable footing on level surfaces without needing additional anchoring under normal conditions.

From an operational standpoint, the key advantages are:

• Compatible with Bolero's pre-drilled table tops, allowing flexible top-and-base combinations
• Corrosion-resistant finish requires no specialist maintenance to retain its appearance
• Suitable for both indoor dining areas and sheltered or open outdoor spaces
• Polished finish presents a clean, professional look in customer-facing areas
• Robust enough for the daily wear of commercial hospitality use

It is worth noting that, like any pedestal base, this is designed for use on even surfaces. Uneven or heavily textured outdoor paving may affect stability, and that is worth considering before specifying it for a particular space. It is also worth confirming compatibility with your chosen table top before ordering, as top dimensions and fixing patterns vary across the Bolero range.

This base suits cafés, restaurants, bars, and hospitality venues looking for a durable, low-maintenance solution that can work across multiple areas of a site. If you are furnishing a larger space or need guidance on matching tops and bases across a full layout, our team is happy to talk it through before you commit to quantities.

This pack of two Bolero twin leg table bases provides a straightforward, reliable foundation for rectangular tabletops in commercial dining environments. Constructed from aluminium with stainless steel elements, each base is designed to resist the knocks, moisture and daily wear that come with busy front-of-house use.

In practical service settings, the twin leg profile keeps the base footprint tidy beneath the table, reducing the risk of catching passing staff or guests. Non-slip, non-marking feet help stabilise the table on surfaces that are not perfectly level — a common reality in older hospitality premises — and protect flooring from scuffing over time.

The bases arrive pre-drilled for straightforward attachment to compatible rectangular tops, which reduces assembly time and means less disruption when setting up a new dining area or refreshing an existing one. Key practical points include:

• Aluminium and stainless steel construction resists corrosion in damp or high-traffic environments
• Non-slip feet help compensate for uneven flooring without shimming
• Pre-drilled fixing points speed up assembly with a compatible rectangular top
• Twin leg design keeps the underfoot space clear for seated guests
• Sold as a pair, covering two tables per order

These bases are well suited to cafés, restaurants, canteens and pub dining rooms where a clean, functional table solution is needed without unnecessary complexity. They are best matched to standard-weight rectangular tops and are not intended for heavy-duty outdoor or industrial use.

If you are outfitting a larger space or need guidance on matching bases to specific tabletop sizes and weights, the team is happy to help you get the right combination before you order.

This is a standard-height four-leg table base from Bolero, constructed from aluminium with a clean, contemporary finish. It is designed to pair with a range of predrilled table tops rather than being supplied as a complete table, which gives operators the flexibility to choose a top surface suited to their environment.

The base is well suited to front-of-house settings in cafés, restaurants, pub dining areas, and similar hospitality environments. The aluminium construction keeps the weight manageable for repositioning during setup or deep cleans, while still providing stable, day-to-day support under normal dining use. At 680mm in height, it sits at a standard dining dimension, which is appropriate for conventional chairs rather than bar or counter seating.

In practical terms, the key advantages for operators are:

• Lightweight aluminium build makes floor layout changes straightforward
• Standard dining height suits conventional seating arrangements
• Compatible with multiple Bolero predrilled top ranges for flexible specification
• Contemporary finish presents well in customer-facing areas
• Four-leg design provides reliable stability on level flooring

It is worth noting that the four-leg configuration, while stable on flat, even surfaces, can rock slightly on uneven or older tiled floors. For venues with uneven flooring, a pedestal-style base or adjustable feet may be worth considering. This base is intended for indoor use; if you are outfitting a covered terrace or outdoor area, check compatibility with the Compact Exterior top range specifically.

This base is best suited to smaller hospitality operators specifying individual tables or replacing worn bases within an existing set. If you are furnishing a larger venue and need heavier-duty or outdoor-rated options, it is worth discussing the full range before committing to a quantity order.

If you are unsure which top and base combination is right for your space, our team is happy to talk it through with you.