Table Bases

The Bolero cast iron table base is a single-pedestal, floor-standing base designed for use in commercial hospitality environments. It follows standard dining height proportions and is built to pair with Bolero's range of predrilled table tops, including Duroflat, Durolight, Compact Exterior, Lamidur, and Werzalit surfaces.

Cast iron is a sensible choice for a commercial base. It provides meaningful weight and a low centre of gravity, which keeps the table stable during a busy service without the need for additional fixings. The broad foot spread further reduces the risk of toppling — a practical consideration in tighter floor layouts where tables are seated close together or customers are moving around frequently. At 18kg, the base has enough mass to stay planted but is still manageable when moving furniture for cleaning or reconfiguration.

From a day-to-day operational standpoint, the key practical advantages are:

• Stable underfoot during service — resists nudging and knocks
• Compatible with a wide range of Bolero predrilled top surfaces
• Clean profile with no hollow legs or complex joints to trap debris
• Black finish sits neutrally against most commercial interior schemes
• Suitable for indoor use across cafés, bars, pubs and restaurants

This is a single-pedestal base and is best matched to square or round tops of proportionate size. For longer rectangular surfaces or banquet-style configurations, a twin-base arrangement is generally the more appropriate approach. It is worth confirming top compatibility before ordering, particularly where tops are not predrilled to the standard Bolero pattern.

If you are fitting out a new space or working through which base and top combinations will suit your floor plan, we are happy to talk it through before you commit to an order.

This is a cast iron table leg base designed for poseur or bar-height use, typically paired with a matching table top to create a standing-height table suitable for front-of-house hospitality settings. At poseur height it is a practical choice for bar areas, brasserie counters, and high-top seating arrangements where customers stand or perch rather than sit at a conventional dining height.

Cast iron bases of this type are a common and well-proven choice in busy hospitality environments because the material provides genuine stability without the need for ballast plates or additional weighting. In outdoor settings — patios, beer gardens, and covered terraces — that inherent mass helps keep tables settled during service without constant repositioning. The base is not immune to heavy wind conditions, but for most sheltered outdoor or semi-outdoor areas it performs reliably across seasons.

From an operational standpoint, the practical advantages of this kind of base include:

• Heavy cast iron construction resists tipping under normal service conditions
• Compatible with Bolero and Werzalit pre-drilled table tops for straightforward assembly
• Suited to both indoor bar areas and sheltered outdoor hospitality spaces
• Decorative profile appropriate for brasserie, café, and bar-style fit-outs
• Durable finish that holds up to regular cleaning and outdoor exposure

It is worth noting that at 12kg this base is substantial to handle during installation or layout changes. For venues that frequently reconfigure their floor plan, the weight that provides stability also makes repositioning more demanding. It is also worth confirming top compatibility before ordering — the base is designed for pre-drilled tops from the Bolero and Werzalit ranges rather than universal use.

This base is well suited to bars, cafés, bistros, and restaurant areas looking for a straightforward, durable poseur-height solution without a premium price. If you are outfitting a larger scheme or need guidance on top pairings and quantities, our team is happy to help you plan it through before you order.

The Bolero Cast Iron Step Square Table Base is a fixed-height, single-pedestal base designed for use with compatible predrilled square table tops in commercial front-of-house settings. Cast iron construction and a black finish make it a practical, neutral option for cafés, bars, pub dining rooms, and bistros where tables need to withstand daily use without fuss.

Cast iron bases earn their place in busy hospitality environments largely because of their weight. At 15kg, this base sits firmly on smooth or tiled floors, resisting the gradual rocking and shifting that lighter alternatives tend to develop over months of heavy use. Tables that wobble frustrate both staff and guests; the mass of a cast iron base largely eliminates that problem without any additional adjustment.

From an operational standpoint, the key practical advantages are:

• Solid cast iron construction holds up well across years of front-of-house use
• Standard 720mm dining height works with conventional chair heights without modification
• Square footprint suits tighter floor layouts and distributes load evenly
• Compatible with Bolero's Duroflat, Durolight, Compact Exterior, Lamidur, and Werzalit predrilled top ranges
• Black finish sits neutrally within most interior schemes and shows wear less readily than lighter finishes

There are no utilities or installation requirements — the base positions directly on the floor. It is worth confirming before ordering that your chosen top is predrilled to the correct fixing pattern, as not all tops will align without modification. On uneven or stone-flag floors, it is sensible to consider floor protection or levelling pads to avoid marking both the base and the surface beneath it.

This base suits operators fitting out standard dining areas with moderate to high daily covers. It is a reliable choice for single-site restaurants, pub dining rooms, and café fitouts. Operators equipping larger or more intensive venues may find it worth reviewing the wider range of bases before committing to a single option.

If you would like guidance on matching a base to a particular top or working out the right configuration for your floor layout, the team is glad to help before you place an order.

This is a cast iron table base from Bolero, finished in black and designed for use in commercial dining environments. It provides the structural foundation for a table top, sitting at a standard dining height and offering a solid, stable platform suited to everyday front-of-house use in cafés, bars, pubs and restaurants.

Cast iron is a practical material choice for high-footfall venues. It resists impact damage well and holds up reliably under the kind of repeated contact and movement that comes with busy service periods. At 16.5kg, the base is heavy enough to stay secure during use without needing to be fixed to the floor, which helps reduce the risk of tables shifting or tipping — a common frustration in tightly spaced dining areas or venues that see a lot of standing trade. A zinc protective layer makes the base suitable for covered outdoor use as well as indoor settings.

• Stable under regular use without requiring floor fixings
• Cast iron construction handles impact and daily wear reliably
• Zinc coating provides protection in damp or outdoor conditions
• Compatible with round tops up to 600mm diameter or square tops up to 700x700mm
• Straightforward to pair with replacement or upgraded table tops

In practical terms, this base suits venues looking to refresh or standardise their furniture without a full replacement programme. It is compatible with Bolero table tops with a maximum diameter of 600mm or a maximum square size of 700x700mm — it is worth confirming your intended top dimensions before ordering. For larger table formats or heavier commercial use, a more substantial base may be more appropriate.

If you are unsure whether this base suits your table tops or your venue layout, we are happy to help you work through the options.

This is a standard-height four-leg table base from Bolero, constructed from aluminium with a clean, contemporary finish. It is designed to pair with a range of predrilled table tops rather than being supplied as a complete table, which gives operators the flexibility to choose a top surface suited to their environment.

The base is well suited to front-of-house settings in cafés, restaurants, pub dining areas, and similar hospitality environments. The aluminium construction keeps the weight manageable for repositioning during setup or deep cleans, while still providing stable, day-to-day support under normal dining use. At 680mm in height, it sits at a standard dining dimension, which is appropriate for conventional chairs rather than bar or counter seating.

In practical terms, the key advantages for operators are:

• Lightweight aluminium build makes floor layout changes straightforward
• Standard dining height suits conventional seating arrangements
• Compatible with multiple Bolero predrilled top ranges for flexible specification
• Contemporary finish presents well in customer-facing areas
• Four-leg design provides reliable stability on level flooring

It is worth noting that the four-leg configuration, while stable on flat, even surfaces, can rock slightly on uneven or older tiled floors. For venues with uneven flooring, a pedestal-style base or adjustable feet may be worth considering. This base is intended for indoor use; if you are outfitting a covered terrace or outdoor area, check compatibility with the Compact Exterior top range specifically.

This base is best suited to smaller hospitality operators specifying individual tables or replacing worn bases within an existing set. If you are furnishing a larger venue and need heavier-duty or outdoor-rated options, it is worth discussing the full range before committing to a quantity order.

If you are unsure which top and base combination is right for your space, our team is happy to talk it through with you.

This is a cast iron table leg base from Bolero, designed in a classic brasserie style. It provides the weighted foundation for a standard-height dining table and is intended for use in commercial hospitality environments — restaurants, cafés, bars, and similar venues.

Cast iron construction gives the base its key working qualities. At 15kg, it sits firmly on the floor without requiring additional fixing, resisting the kind of movement that occurs during busy service when chairs are pulled in and out repeatedly. That stability matters in a dining room context, where a table that shifts or rocks undermines both the guest experience and the safety of the setting. The material also handles outdoor and covered terrace use reasonably well, offering good resistance to impact and surface wear over time.

From an operational standpoint, the practical advantages are straightforward:

• Substantial weight keeps tables stable during busy service without floor fixings
• Cast iron resists surface damage from regular commercial use
• Brasserie styling suits traditional and contemporary dining room schemes
• Standard height fits most commercial table tops without adaptation
• Low maintenance — no mechanical parts or complex cleaning requirements

This base is well suited to indoor dining rooms and covered outdoor areas. It is worth checking floor surface and load-bearing if you are specifying large numbers for a single space, and confirming top compatibility before ordering — not all table tops share the same fixing pattern or size requirement.

If you are fitting out a venue and want to discuss quantities, top pairings, or whether this base suits your particular space, the team is happy to help before you commit to an order.

The FLAT Auto Adjust SX26 is an aluminium bar height table base designed for commercial hospitality settings where floor stability and efficient storage both matter. The flip top mechanism allows the base to fold flat when not in use, which is a practical advantage in venues that need to reclaim floor space outside of service hours or rearrange layouts quickly between sittings.

The most operationally significant feature of the SX26 is its PAD system — a patented self-stabilising hydraulic mechanism built into the base. On uneven or slightly undulating floor surfaces, which are common in older premises, outdoor terraces, and period buildings, this system automatically compensates to keep the table stable without manual adjustment. That removes a persistent source of customer frustration and staff intervention during service.

Because the stabilisation resets each time the base is moved, aligning multiple tables for event layouts or combined covers is straightforward. The base is suitable for use with a range of round and square table tops.

• Flip top design folds flat for compact storage after service
• Self-stabilising on uneven indoor and outdoor surfaces
• Resets automatically when repositioned — no tools required
• Aluminium construction keeps the base light enough to handle easily
• Suitable for indoor and outdoor hospitality environments

It is worth confirming that your intended table top size falls within the supported dimensions before ordering, particularly for larger or heavier tops. The base is available in black and is well suited to bar, café, and restaurant environments that run bar-height seating as part of their layout.

If you are fitting out a larger space, mixing table heights, or unsure which base suits your floor type, our team is happy to talk it through with you.

The FLAT Auto Adjust ST22 EP is an aluminium dining table base designed for rectangular table tops, incorporating a flip-top mechanism that allows the table to be folded flat for compact storage or stacked efficiently with other bases when not in use. It is a practical choice for operators who need flexible dining layouts or who regularly reconfigure their floor plan.

The ST22 uses FLAT's PAD system — a patented hydraulic self-stabilising mechanism built into the base. When the table is placed or moved, the base adjusts automatically to compensate for uneven or undulating floor surfaces without any manual intervention. This is a useful feature in older venues, outdoor terraces, or any setting where perfectly level floors cannot be guaranteed. It removes the need for staff to fuss with levelling feet and reduces the likelihood of customer complaints about wobbly tables during service.

The EP (Extra Protection) coating gives this base good resistance to moisture and environmental exposure, making it suitable for covered outdoor areas, seafront venues, beer gardens, and similar settings where standard bases might corrode or degrade more quickly.

• Lightweight aluminium construction keeps handling straightforward when reconfiguring layouts
• Flip-top mechanism enables quick, compact storage between uses
• Automatic stabilisation works whenever the table is repositioned — no manual adjustment needed
• EP coating provides reliable protection in damp or coastal environments
• Compatible with rectangular tops up to 800 x 1200mm

This base is well suited to café bars, casual dining restaurants, event venues, and outdoor hospitality operators. It is a mid-range solution designed to balance practicality with durability. For heavier-use or larger fixed dining configurations, alternative bases with greater load capacity or a fixed-top design may be worth considering.

If you are unsure whether the ST22 suits your floor surface, environment, or table top size, we are happy to talk it through before you order.

The FLAT Auto Adjust SX26 is an aluminium dining table base designed with two practical features that address common front-of-house challenges: automatic self-levelling on uneven floors, and a flip-top mechanism that allows tables to be folded and stored compactly when not in use.

The base uses FLAT's PAD (Patented Actuator Device), a hydraulic self-stabilising system that adjusts automatically when the base is placed or moved. In practice, this means the table settles firmly on uneven or slightly sloped surfaces without any manual adjustment from staff — a genuine operational advantage in older venues, outdoor terraces, or any space where the floor is not perfectly level. There is no need to hunt for folded card or rubber wedges, and the table stays stable under normal dining use.

The flip-top mechanism is well suited to venues that need to reconfigure or clear the dining area at the end of service. Tables can be folded and stored against a wall or in a storeroom, reducing the space required overnight or between events.

• Self-levels automatically on uneven or sloped surfaces via hydraulic PAD technology
• Flip-top mechanism allows compact upright storage between service periods
• Lightweight aluminium construction at 5.2kg makes repositioning straightforward
• Suitable for indoor and outdoor use in hospitality environments
• Compatible with square and round table tops up to 800mm across

At 5.2kg, the base is light enough for a single staff member to move and store without difficulty. The aluminium build holds up well in everyday front-of-house use, though operators should note this is a dining-height base and is not suited to bar or counter-height applications without the appropriate top plate height.

This base works well for restaurants, cafes, bars, and event spaces that deal with imperfect floor conditions or need flexible table layouts. It is particularly useful where tables are regularly moved, stored, or reconfigured between covers. For higher-volume or heavier-duty environments, a more robust base specification may be worth considering.

If you are fitting out a new dining space or replacing existing bases across multiple tables, it is worth discussing your floor conditions and table-top sizes with us before ordering — small details can affect which specification works best for your setup.

The FLAT Auto Adjust KX22 is a bar height table base constructed from cast iron with a square angular foot profile. It is designed specifically for smaller table tops — accommodating square tops up to 600mm and round tops up to 650mm — making it well suited to compact bar and café seating layouts where space between covers is limited.

The defining feature of this base is FLAT's PAD system — a patented hydraulic actuator built into the column. Rather than relying on manual levelling feet, the mechanism automatically compensates for uneven floor surfaces. In practice, this means the base self-stabilises whenever it is placed or moved, without staff needing to crouch down and adjust anything. On older tiled floors, stone flags, or any surface with slight undulation — common in pubs, restaurants, and outdoor-covered areas — this removes a persistent source of customer complaints and front-of-house interruption during service.

From an operational standpoint, the auto-stabilisation also allows tables to be realigned and reconfigured quickly when combining covers, as each base adjusts independently on repositioning.

• Eliminates manual levelling — useful on uneven or worn floor surfaces
• Self-stabilises on movement, supporting quick cover reconfiguration
• Cast iron construction offers stability at bar height without a wide base footprint
• Compact square foot profile suits tighter floor plans

At bar height, the base is suited to high stool seating rather than standard dining. It is worth confirming your intended stool and table top heights are compatible before ordering, as bar height configurations vary. The cast iron construction adds meaningful weight at the base, which is appropriate for taller columns, though installation on very soft or uneven substrates should be considered carefully.

This base is most appropriate for smaller hospitality venues, café bars, and pub environments with compact table top requirements. Operators needing larger top compatibility or a standard dining height will find alternative bases in the range better suited to those requirements.

If you are fitting out a new space or replacing existing bases and want to talk through floor conditions, top sizing, or stool compatibility, our team is happy to help you work through the detail before you commit.

The Bolero Rectangular Cast Iron Table Base is a floor-standing pedestal base designed to support rectangular table tops in commercial dining environments. Constructed from cast iron, it provides a stable, weighted foundation that resists the everyday knocks and movement associated with busy front-of-house use.

Cast iron bases are a practical choice for hospitality venues where tables need to hold their position through service periods without rocking or shifting. The material weight works in its favour here — at 19kg, it sits firmly on the floor and is not easily displaced by casual contact. This makes it well suited to pubs, bars, restaurants, and café environments where durable, low-maintenance furniture is a priority.

From an operational standpoint, the base offers a few straightforward advantages:

• Cast iron construction resists wear and corrosion in high-traffic dining areas
• Rectangular footprint suits booth or banquette seating configurations
• Compatible with a range of commercially available table tops
• Stable weighted base reduces the need for ongoing adjustment or re-levelling
• Simple, unfussy profile works with most interior styles

Installation is straightforward — the base requires no fixing to the floor and is freestanding. Table tops need to be compatible with the base fixing arrangement, so it is worth confirming compatibility before ordering, particularly if you are pairing the base with tops from a different supplier. The 19kg weight means it is manageable for two people to position, though manoeuvring through tight service corridors or up staircases is worth planning for in advance.

This base is well suited to smaller to mid-sized hospitality venues looking for a reliable, practical solution without unnecessary complexity. If you are furnishing a larger site or have specific layout requirements, it is worth discussing your setup with the team before committing to a quantity.

If you have questions about compatibility with particular table tops or suitability for your space, we are happy to help you work through the options.

This is a cast iron twin leg table base sold as a pack of two, designed to pair with a range of standard commercial table tops. The twin leg profile sits at standard dining height and provides a stable, floor-level footprint that works well in both open dining areas and tighter room layouts where a central pedestal base might restrict seating arrangements.

Cast iron construction gives these bases the weight and rigidity needed for a busy front-of-house environment. At 11kg per base, they resist the everyday knocks and shifts that come with high-turnover covers, and the material holds up well to the wear of a working hospitality setting without the flex or instability sometimes seen in lighter alternatives.

In practical terms, the twin leg design suits operators who need to push tables together for larger parties, since the legs sit towards the ends of the table rather than occupying the central floor space. The bases are compatible with Bolero's predrilled top ranges — including Duroflat, Durolight, Compact Exterior, Lamidur and Werzalit — which simplifies ordering when fitting out or refreshing a dining area with a consistent look.

• Stable cast iron construction suitable for high-turnover dining environments
• Twin leg profile allows tables to be joined without obstruction underfoot
• Compatible with multiple Bolero predrilled table top ranges
• Standard dining height suits most front-of-house seating configurations
• Sold in pairs, reducing per-unit cost for larger fit-outs

These bases are well suited to restaurants, cafés, pub dining rooms and contract catering venues fitting out multiple covers. If you are working on a larger installation or need advice on matching tops and bases across a full dining floor, the team is happy to help you get the combination right before you order.

This is a round pedestal table base from Bolero, constructed in polished stainless steel and designed to pair with Bolero's range of pre-drilled table tops. It is a straightforward, practical component for operators furnishing a dining area — whether that's a restaurant floor, a café terrace, or a hospitality space that sees regular use.

Stainless steel is a sensible material choice for a table base in commercial settings. It resists corrosion and weathering, which makes this base equally usable outdoors on a patio or terrace as it is inside. At just under 18kg, it carries enough mass to provide solid, stable footing on level surfaces without needing additional anchoring under normal conditions.

From an operational standpoint, the key advantages are:

• Compatible with Bolero's pre-drilled table tops, allowing flexible top-and-base combinations
• Corrosion-resistant finish requires no specialist maintenance to retain its appearance
• Suitable for both indoor dining areas and sheltered or open outdoor spaces
• Polished finish presents a clean, professional look in customer-facing areas
• Robust enough for the daily wear of commercial hospitality use

It is worth noting that, like any pedestal base, this is designed for use on even surfaces. Uneven or heavily textured outdoor paving may affect stability, and that is worth considering before specifying it for a particular space. It is also worth confirming compatibility with your chosen table top before ordering, as top dimensions and fixing patterns vary across the Bolero range.

This base suits cafés, restaurants, bars, and hospitality venues looking for a durable, low-maintenance solution that can work across multiple areas of a site. If you are furnishing a larger space or need guidance on matching tops and bases across a full layout, our team is happy to talk it through before you commit to quantities.

The Bolero Aluminium Flip Top Table Base is a straightforward solution for venues that need to reconfigure seating layouts quickly or store tables efficiently when not in use. The flip-top mechanism allows the tabletop to fold flat against the base, so multiple tables can be nested together in a compact footprint — a practical advantage in function rooms, cafés, and event spaces where floor area is used for multiple purposes throughout the day or week.

Constructed from aluminium, the base is notably lighter than cast-iron or steel alternatives, which makes it easier for front-of-house staff to move and reposition without assistance. Despite its low weight, aluminium provides adequate rigidity for everyday table service, and the material holds up well in both indoor settings and covered outdoor areas. The black finish is a neutral choice that suits most room schemes without drawing attention to itself.

From an operational standpoint, the main advantages of this base are:

• Flip-top mechanism reduces storage footprint when tables are not in service
• Aluminium construction keeps individual table weight manageable for staff
• Pre-drilled fixing points simplify attachment of a compatible tabletop
• Suitable for indoor use and sheltered outdoor terraces
• Black finish works across a range of interior styles without clashing

The base is pre-drilled and designed to accept tabletops up to 700mm square, so it is worth confirming your chosen tabletop dimensions before ordering. It is not intended for heavy-duty banqueting use where tables may bear significant sustained load, and for high-traffic venues handling large daily covers, a heavier-duty pedestal base may offer greater long-term stability.

This base is well suited to cafés, small restaurants, hotel lounges, and event venues that need dependable, easy-to-store table furniture without overcomplicating the specification. If you are fitting out a larger space or have specific layout requirements, our team is happy to talk through what will work best for your situation.

The Bolero Flip Top Aluminium Table Base is a standard-height table base designed around a practical nesting mechanism — the top tilts to allow multiple bases to stack together in a compact footprint. Made from aluminium, it arrives flat-packed for straightforward self-assembly and is suitable for both indoor and outdoor settings.

In busy hospitality environments, the ability to reconfigure or store seating quickly between services is a genuine operational advantage. The flip top mechanism means bases can be nested and moved with minimal effort, making it a sensible choice for venues that regularly adjust their floor layouts — function rooms, cafés, pub dining areas, and event spaces in particular.

• Nesting flip top design reduces storage space compared to fixed bases
• Aluminium construction keeps the base lightweight without sacrificing stability
• Flat-pack delivery simplifies handling and self-assembly on site
• Suitable for indoor and outdoor use
• Compatible with 600mm square and round table tops, including Duroflat, Durolight, Compact Exterior, Lamidur, and Werzalit pre-drilled ranges

Installation is straightforward — no tools beyond basic assembly are required, and the base does not need floor fixing. The aluminium finish is weather-tolerant for covered outdoor terraces, though as with any base used outdoors, it is worth considering the surface levelness and whether the table top selected is appropriate for external conditions.

This base suits cafés, restaurants, hotels, and event venues that need flexible seating arrangements and efficient storage. It is best matched to moderate-volume settings with standard dining tables. For venues requiring heavier-duty bases or larger table formats, it is worth considering alternative options within the range.

If you are fitting out multiple covers or mixing table sizes and top materials, the team is happy to help you work through the right combination before you order.

The Bolero black cast iron table base is a straightforward, heavy-duty pedestal base designed for commercial dining environments. Cast from solid iron with a black finish, it provides a stable foundation for dining tables in cafés, bars, pubs, and restaurants where furniture is in constant use throughout the day.

Cast iron performs well in busy front-of-house settings because its weight works in its favour. At just over 20kg, the base stays firmly planted underfoot during service, reducing the risk of tables shifting when customers lean on them or when staff clear covers at pace. That inherent stability is something lighter aluminium or resin bases often struggle to match under the same conditions.

From a practical standpoint, cast iron holds up well to the knocks and scuffs that come with daily commercial use. The material does not dent or deform under impact, and the zinc protective layer helps resist surface corrosion, making the base a reasonable option for covered outdoor or semi-outdoor areas such as beer gardens and terrace settings.

• Resistant to impact damage and deformation in daily service
• Heavy base weight reduces table movement during busy covers
• Zinc layer provides additional protection against surface corrosion
• Compatible with Bolero table tops up to 600mm round or 700x700mm square
• Suitable for indoor use and covered outdoor dining areas

It is worth noting that the weight, which is an advantage in use, does make handling and repositioning more demanding than lighter alternatives. If the layout of your dining room changes frequently, or if staff regularly move tables between service periods, that is worth factoring into your decision. For lighter-use or temporary settings, a more portable base may be more practical.

This base is well suited to established dining venues — restaurants, café bars, and pub dining rooms — where tables sit in fixed or semi-fixed positions and durability over time matters more than ease of relocation. If you are fitting out a larger venue or need guidance on matching base sizes to your existing or planned table tops, the team are happy to talk it through before you order.

The FLAT Auto-Adjust KX30 is a cast iron dining table base built around FLAT's PAD (Patented Actuator Device) — a self-stabilising hydraulic mechanism integrated into the base that automatically levels the table on uneven or undulating floor surfaces. The design follows a modern X-base profile and is intended as a straightforward replacement for existing table bases, fitting standard commercial table tops.

In busy front-of-house environments, wobbling tables are a persistent nuisance — both for guests and for staff who end up responding to complaints mid-service. The KX30 addresses this at the base level rather than relying on staff to wedge or shim tables manually. The self-levelling mechanism engages automatically when the base is placed or repositioned, which is particularly practical in older buildings, marquees, outdoor terraces, or any venue where floors are not perfectly flat. The cast iron construction gives the base the weight and stability needed to support active dining use without shifting.

Key operational characteristics worth noting:

• Self-stabilising hydraulic system eliminates the need for manual shimming
• Activates automatically when the base is moved or repositioned
• Allows multiple bases to be aligned consistently across a dining floor
• Compatible with table tops up to 1050mm in diameter or width
• Cast iron build provides solid, low-movement stability during service

Installation is straightforward — the base accepts a standard top plate connection and does not require tools or specialist fitting beyond attaching the table top. It is worth confirming your existing table tops are compatible with the top plate size before ordering. At 12kg, the base has a reasonable weight for front-of-house handling, though staff should be aware of this when repositioning tables regularly in a fast-turnaround setting.

The KX30 is well suited to restaurants, cafés, bistros, and event venues where uneven flooring is a known issue and manual levelling is not a practical solution during service. It is equally useful where tables are frequently reconfigured, as the auto-levelling removes a step from the reset process. For venues with very high table turnover or requiring heavier-duty commercial specifications, it is worth exploring whether an alternative base weight or fixing arrangement would better suit the operation.

If you are unsure whether this base will work with your existing table tops or floor conditions, our team are happy to talk through the specifics before you commit to an order.

The FLAT Auto Adjust PX23 is a cast iron dining table base built around the brand's PAD system — a patented hydraulic stabilising mechanism that automatically compensates for uneven or undulating floor surfaces. Rather than relying on manual screw feet, the base self-adjusts whenever it is placed or repositioned, maintaining a level, wobble-free surface without any intervention from staff or customers.

In a busy front-of-house environment, table stability is one of those details that quietly affects the dining experience. Rattling crockery, tilting glasses and uncomfortable seating are common complaints in older venues with flagstone floors, worn wooden boards, or naturally uneven surfaces. The PX23 addresses this directly, and because it re-stabilises automatically on movement, it also simplifies the process of reconfiguring table layouts between covers — useful where tables are regularly pushed together or separated for different party sizes.

The Parisian-style profile suits venues with a European bistro aesthetic, intimate dining rooms, bars, and hotel restaurants where the base will be visible beneath the table top. Practical points to consider:

• Self-stabilising PAD hydraulic system requires no manual adjustment
• Top plate accommodates square tops up to 750mm and round tops up to 800mm
• Cast iron construction provides stable ballast and long-term durability
• At 17kg, the base is substantial — factor this into seating reconfiguration workflows
• Compatible with standard table tops; no proprietary fixing required

The PX23 is well suited to established restaurants, hotel dining rooms, and bars where floor levelness is inconsistent and table stability complaints have been an ongoing issue. It is a single-pedestal base, so it is best matched to two- or four-cover tops within the supported size range. For larger banqueting or conference table applications, a twin-pedestal or trestle solution would typically be more appropriate.

If you are specifying tables across a whole dining room or need guidance on base-to-top combinations for your specific floor type, it is worth having a conversation with us before ordering.

This pack of two Bolero twin leg table bases provides a straightforward, reliable foundation for rectangular tabletops in commercial dining environments. Constructed from aluminium with stainless steel elements, each base is designed to resist the knocks, moisture and daily wear that come with busy front-of-house use.

In practical service settings, the twin leg profile keeps the base footprint tidy beneath the table, reducing the risk of catching passing staff or guests. Non-slip, non-marking feet help stabilise the table on surfaces that are not perfectly level — a common reality in older hospitality premises — and protect flooring from scuffing over time.

The bases arrive pre-drilled for straightforward attachment to compatible rectangular tops, which reduces assembly time and means less disruption when setting up a new dining area or refreshing an existing one. Key practical points include:

• Aluminium and stainless steel construction resists corrosion in damp or high-traffic environments
• Non-slip feet help compensate for uneven flooring without shimming
• Pre-drilled fixing points speed up assembly with a compatible rectangular top
• Twin leg design keeps the underfoot space clear for seated guests
• Sold as a pair, covering two tables per order

These bases are well suited to cafés, restaurants, canteens and pub dining rooms where a clean, functional table solution is needed without unnecessary complexity. They are best matched to standard-weight rectangular tops and are not intended for heavy-duty outdoor or industrial use.

If you are outfitting a larger space or need guidance on matching bases to specific tabletop sizes and weights, the team is happy to help you get the right combination before you order.

The Bolero Cast Iron Ornate Table Leg Base is a single-pedestal table support built for front-of-house use in hospitality environments. It is cast from iron with a decorative, ornate profile finished in black, and is sized for standard dining height. The construction is straightforward — a heavy, stable base designed to keep tables firmly in place throughout a busy service.

Cast iron at this weight performs reliably in dining rooms, bar areas, and café floors where tables take daily wear. The mass of the base means tables are unlikely to shift during service, whether customers are leaning on them, staff are clearing quickly between covers, or the floor surface is uneven. The ornate profile gives it a presence that suits traditional interiors — it is a better fit for a pub, bistro, or independent café than for a minimal or contemporary scheme where a plain tubular base might be more appropriate.

• Compatible with Bolero's pre-drilled top ranges including Duroflat, Durolight, Compact Exterior, Lamidur, and Werzalit
• Standard dining height suits most conventional seating — confirm against your chair seat heights before ordering
• Cast iron construction resists the daily knocks of a busy dining room without deterioration
• Black finish works across a wide range of traditional interior styles
• Weight provides natural stability without additional floor fixing

This base is well suited to traditional pubs, independent restaurants, bistros, and café-bars where durability and character matter equally. It pairs best with Bolero's own pre-drilled compatible tops for a secure, properly aligned fit. At 18.5kg per unit, it is worth factoring handling and storage into your planning if you are furnishing a larger site. For operators needing a different profile or a higher-volume layout, plainer or heavier-duty alternatives are available in the range.

If you are working through a larger fit-out or want to confirm which top and base combination suits your floor plan, the team is happy to talk it through before you commit to an order.

The FLAT Auto-Adjust SX26 EP is an aluminium dining table base designed for hospitality environments where practicality and space management matter. The flip-top mechanism allows table tops to fold upright so bases can be nested and stored efficiently — useful in venues that reconfigure their floor layout regularly or need to clear space outside of service.

The SX26 incorporates FLAT's PAD system — a patented hydraulic self-levelling mechanism built into the base. When a table is placed on an uneven or undulating surface, the PAD adjusts automatically without any manual intervention. This is particularly relevant for outdoor terraces, older buildings with worn or uneven floors, or anywhere that conventional fixed-leg bases tend to rock. The stabilisation also resets whenever the table is repositioned, which helps keep tables aligned when multiple tops are pushed together for larger covers.

The EP (Extra Protection) coating makes the SX26 a considered choice for outdoor use and coastal settings where standard aluminium bases may be more susceptible to corrosion over time. The aluminium construction keeps the base reasonably lightweight, which supports easier handling during daily layout changes.

• Flip-top mechanism for efficient stacking and storage between services
• Automatic hydraulic levelling on uneven or outdoor surfaces
• EP coating providing additional corrosion resistance for outdoor use
• Re-stabilises on relocation, supporting flexible layout arrangements

The SX26 is a practical choice for casual dining venues, outdoor terraces, bistros, and managed hospitality spaces where tables are moved frequently and floor conditions vary. If you are fitting out a larger venue with more demanding throughput requirements or need bases suited to heavier commercial table tops, it is worth discussing your specific table top dimensions and usage before ordering.

If you would like to talk through whether the SX26 is the right fit for your space, the team is happy to help.

The FLAT Auto Adjust SX26 is an aluminium bar height table base designed for commercial hospitality environments where floor conditions are imperfect and space efficiency during non-service hours matters. It combines a flip-top mechanism with self-stabilising hydraulic feet, making it a practical choice for venues that need to reconfigure or clear their floor quickly and reliably.

The SX26 uses FLAT's PAD system — a patented hydraulic actuator built into the base — which automatically levels the table on uneven or undulating floors without any manual adjustment from staff. This happens passively as the table is set down, which in a busy service environment removes a small but persistent operational frustration. The base also aligns automatically when tables are pushed together, which helps operators run consistent row layouts without individually checking each table.

The EP (Extra Protection) coating is applied over the aluminium construction to resist corrosion in outdoor settings and coastal environments where salt air would quickly degrade a standard finish. This makes the SX26 a sound choice for terraces, rooftop spaces, or seaside venues that need furniture capable of staying outdoors for extended periods.

• Flip-top mechanism enables fast, compact storage between services
• Self-levelling feet remove the need for staff to check or adjust tables
• EP coating provides long-term corrosion resistance in outdoor and coastal use
• Aluminium construction keeps the base manageable to lift and reposition
• Automatic alignment when tables are grouped simplifies room layouts

Installation is straightforward — the base accepts a standard top plate connection and is compatible with square tops up to 650mm and round tops up to 750mm in diameter. No fixings to the floor are required, which suits venues with restrictions on floor penetrations. It is worth confirming your intended tabletop size and shape before ordering to ensure compatibility.

The SX26 is well suited to bars, rooftop terraces, seaside restaurants, and any venue where bar height seating is used alongside regular floor reconfigurations. For indoor venues with level floors and no storage constraints, a fixed-height base may offer a simpler and more cost-effective solution. Where a venue operates at very high volume and needs maximum robustness, it is worth discussing whether a heavier-duty option would better fit the demands of the site.

If you are unsure whether the SX26 fits your floor conditions, tabletop specification, or venue layout, our team is happy to talk through the details before you commit.

The Bolero Cast Iron Table Leg Base is a single pedestal-style floor-standing base designed for use in commercial dining environments. It provides a stable platform for a range of pre-drilled table tops and is built from cast iron to withstand the daily demands of high-footfall front-of-house settings.

Cast iron bases of this type are a familiar choice across busy cafés, pub dining rooms, restaurants, and contract catering spaces. The material provides inherent weight and rigidity, which means the table stays in place under the regular loading, clearing, and repositioning that commercial dining involves. At 13.5kg, the base is substantial enough to stand firm without requiring floor fixings in most standard installations.

Practical points worth noting:

• Compatible with Bolero's Duroflat, Durolight, Compact Exterior, Lamidur, and Werzalit pre-drilled top ranges
• Standard dining height, suitable for pairing with conventional commercial seating
• Cast iron construction handles everyday knocks and scuffs in busy front-of-house use
• No power, water, or gas connections required — straightforward placement and assembly
• The 610mm base diameter delivers a stable footprint without taking up excessive floor space

This base suits venues setting up or refreshing a dining area where a clean, understated aesthetic and proven durability take priority. It works well as part of a coordinated furniture order across a single site. If you are specifying for an outdoor space, it is worth confirming which tops and bases carry an exterior rating before committing to a configuration.

If you are planning a larger fit-out and want to talk through top and base compatibility or quantities, we are happy to help you work through it before you order.

The FLAT Auto Adjust ST22 is an aluminium flip top table base designed for commercial dining environments where efficient use of space and stable, level tables are both priorities. The flip top mechanism allows the table top to fold down flat against the base column, making it straightforward to stack and store multiple tables when floor space needs to be cleared quickly — useful for venues that regularly reconfigure their dining areas for events, private hire or cleaning.

Where the ST22 sets itself apart from a standard fixed base is its PAD system — a patented hydraulic self-stabilising mechanism built into the foot. On uneven or slightly bumpy floor surfaces, which are common in older buildings, outdoor terraces and covered external spaces, the base automatically adjusts to maintain a level, wobble-free table without any manual intervention from staff. This is a meaningful operational advantage in busy service periods, where a shaky table is a recurring complaint that takes time to address and disrupts the customer experience.

The base is well suited to rectangular table tops and is lightweight enough at 7kg for front-of-house staff to manage without difficulty during room resets.

• Flip top mechanism speeds up room resets and table storage
• Self-stabilising foot removes the need for wedges or manual adjustment
• Lightweight aluminium construction reduces handling effort during reconfiguration
• Suitable for indoor and outdoor use including uneven surfaces
• Black finish works across a range of dining room styles and colour schemes

This base is a practical choice for restaurants, bars, hotels and event spaces that need reliable, easy-to-manage seating at volume. If you run a high-turnover venue or need guidance on matching bases to specific top sizes or flooring conditions, our team is happy to talk it through before you order.

The FLAT Auto-Adjust KX22 is a cast iron dining table base designed for use with smaller table tops, typically up to 750mm in diameter. Its defining feature is the PAD system — a patented hydraulic actuator built into the base that automatically compensates for uneven floor surfaces, keeping the table level and stable without manual adjustment.

In a busy hospitality environment, uneven floors are a common reality, particularly in older buildings, outdoor terraces, or areas with tiled or stone flooring. The KX22 addresses this without requiring staff intervention — when the table is placed or moved, the stabilising mechanism adjusts automatically. This is a practical advantage during service when time is limited and re-levelling tables manually is not a realistic option.

The self-stabilising design also makes it straightforward to push tables together for larger covers, as the base adjusts independently of adjacent tables, allowing multiple tops to sit flush and level.

• Suitable for table tops up to 750mm — well suited to café, bistro, and smaller dining settings
• Automatic floor compensation removes the need for manual levelling feet adjustments
• Cast iron construction provides the floor weight needed to keep smaller tops stable during service
• The 330mm top plate offers a clean, compact footprint appropriate for tighter layouts

At 10kg, the base is manageable for repositioning, though it has sufficient mass to anchor lighter table tops without tipping risk. It is worth confirming your floor loading requirements if the bases are to be used across a large seating area on a suspended floor.

The KX22 is best suited to cafés, restaurants, hotel lobbies, and contract hospitality venues using two- or four-seater configurations with tops up to 750mm. For larger table tops or higher-footfall venues requiring greater stability, a heavier-duty base from the range may be more appropriate.

If you are specifying bases across a full dining floor or working with non-standard top sizes, the team is happy to talk through what will work best for your layout.

The Bolero square table base is a straightforward, well-constructed pedestal base finished in grade 304 stainless steel. It is designed to support a wide range of commercial table tops, making it a practical choice where operators want flexibility across different surface finishes or need to replace a base without committing to a matched set.

In practice, stainless steel bases of this type are commonly used in cafés, restaurants, hotel dining rooms, and staff canteens where durability and ease of cleaning matter more than decorative detail. The grade 304 steel holds up well in busy front-of-house environments and resists the routine wear that comes with daily cleaning and repositioning.

From an operational standpoint, the square footprint offers a degree of stability that suits fixed or semi-fixed floor plans. Key practical points worth considering:

• Grade 304 stainless steel resists corrosion and is straightforward to wipe down
• Compatible with a broad range of commercial table top brands, including laminate and compact exterior surfaces
• Square base geometry suits straight-row layouts and back-to-back table arrangements
• Solid construction handles the everyday knocks of a busy dining environment
• Neutral finish works across most front-of-house aesthetics

At just over 12kg, the base is substantial enough to feel stable underfoot but light enough for repositioning during a deep clean or layout change. One consideration worth noting is that the 400mm square footprint, while well suited to two- and four-cover tables, should be checked against your chosen table top size to confirm the overhang is acceptable for your setting.

This base suits most mid-sized dining operations. If you are fitting out a high-turnover environment with heavier tops or need something configured for outdoor use, it is worth discussing the options with us before ordering.

This is a standard-height cast iron table base from Bolero, designed to pair with a range of pre-drilled table top surfaces to create a complete dining table. The base arrives flat-packed for straightforward assembly and is finished in cast iron, making it easy to coordinate with different top styles and colours across a single site.

Cast iron bases are a practical choice for front-of-house environments where stability under daily use matters. The weight of the material keeps the base planted on the floor during busy service without the wobble common in lighter alternatives, and the finish holds up well in environments where furniture is moved and repositioned regularly.

• Flat-pack delivery simplifies storage and on-site assembly
• Compatible with Bolero's Duroflat, Durolight, Compact Exterior, Lamidur and Werzalit pre-drilled tops
• Cast iron finish coordinates across mixed table top ranges
• Standard dining height suitable for most seating configurations
• Durable material suited to high-footfall service environments

Because this base relies on pre-drilled table tops for assembly, it is worth confirming compatibility before purchasing if you are working with tops from outside the Bolero range. The base weight of 8.5kg is worth considering if furniture is frequently repositioned between service periods, though for fixed or semi-fixed layouts this is rarely a concern.

This base is well suited to cafés, restaurants, pub dining areas, and contract hospitality environments where a consistent floor-level furniture solution is needed across multiple tables. It is a solid choice for mid-volume sites. Operators fitting out larger venues with heavier commercial demands may want to consider whether a more substantial base specification is appropriate for their footfall.

If you are unsure whether this base works with your chosen table top or want guidance on quantity for a fit-out, the team is happy to talk it through with you.

The FLAT Auto Adjust KT22 is a two-base table support system designed for rectangular and oval table tops in indoor hospitality environments. Each base features a three-pronged top plate, and the pair can be repositioned to suit a range of top sizes, giving operators flexibility when fitting out or reconfiguring a dining space. At 720mm in height, the system meets standard dining table height requirements.

The defining feature of the KT22 is FLAT's PAD technology — a patented hydraulic actuator built into each base that continuously self-stabilises on uneven or undulating floor surfaces. In older premises, listed buildings, or any venue where the floor is not perfectly level, this removes the need for manual levelling adjustments and eliminates table wobble during service without any action from staff or guests. The two-footed design on each base also means the spacing between bases can accommodate wheelchair users and mobility equipment, which is a practical consideration for operators with accessibility requirements.

From a front-of-house perspective, the main operational benefits are:

• Automatic stabilisation on rough or uneven floors without manual adjustment
• Flexible base positioning to accommodate different top sizes and layouts
• Wheelchair and mobility equipment access between bases
• Cast iron construction providing a stable, durable platform under daily use
• Consistent, wobble-free dining experience without ongoing staff intervention

Installation is straightforward — the bases are floor-standing with no fixings required in most applications. At 16kg for the pair, they are manageable but not lightweight, and the cast iron construction means care should be taken on delicate or polished flooring surfaces. The system is intended for indoor use only and is not suited to outdoor terraces or exposed areas.

The KT22 is well suited to restaurants, cafés, hotels, and function venues operating on older premises or any site where floor levelness cannot be guaranteed. It works well in spaces that require flexible table configurations or need to meet accessibility standards. For operators with larger or heavier table tops, or where significantly greater footprint stability is required, it is worth discussing whether an alternative base configuration would better suit the application.

If you're unsure whether the KT22 is the right base system for your floor conditions, top sizes, or layout requirements, our team is happy to talk it through with you.

This is a cast iron table base designed to work at coffee height, intended for use with compatible pre-drilled table tops. It is flat-packed for straightforward self-assembly and is suited to café areas, waiting zones, breakout spaces, and any front-of-house setting where a lower table height is the right fit for the seating arrangement.

Cast iron bases of this type are a practical choice for commercial environments because the material provides the dead weight needed to keep tables stable under everyday use without requiring floor fixings. The base is compatible with table tops up to 800mm, which covers the majority of standard two-person tops used in café and bar settings.

• Cast iron construction provides stable, weighted support without floor fixings
• Flat-packed for easy transport and self-assembly on site
• Compatible with pre-drilled table tops up to 800mm
• Coffee height suits low seating arrangements in café and lounge areas
• Straightforward to clean around — no complex base structure

It is worth noting that this base is designed specifically for coffee height use, so it is not interchangeable with a dining height base if your layout requires standard seated dining. If you are fitting out a space that needs a mix of heights, or if you need a base suited to heavier-duty or outdoor use, it is worth checking compatibility before ordering.

This base suits cafés, hotel lobbies, breakout areas, and similar front-of-house spaces where a reliable, low-maintenance table solution is needed. If you have questions about which base height or top size works best for your layout, the team is happy to help you work it through before you commit.

The Bolero black cast iron table base is a single-column pedestal base designed for use with compatible table tops in commercial dining environments. At 720mm high and 420mm in diameter at the foot, it provides a stable, floor-standing support suitable for seated dining across cafés, bars, pubs and restaurants.

Cast iron performs reliably in hospitality settings because it resists the knocks and repeated contact that come with daily service. The weight of the base — 12.5kg — works in its favour here, keeping the table grounded during busy periods and reducing the risk of tops shifting when guests sit down, stand, or place items down with force. A zinc protective layer gives the base some tolerance for outdoor or semi-exposed use, though it is primarily intended for covered areas.

From an operational standpoint, a cast iron pedestal base offers a few practical advantages over lighter alternatives:

• The mass of the base provides stability without requiring additional ballast or floor fixing
• The single-column design keeps the floor area clear, which helps with cleaning and gives guests more leg room than four-leg alternatives
• The black finish is neutral enough to work alongside most table top finishes and interior schemes
• Cast iron does not corrode in the way steel can, making it a longer-term investment for most venues

This base is compatible with Bolero table tops up to 600mm round or 700x700mm square. It is worth confirming top compatibility before ordering, as not all table tops share the same fixing pattern or column diameter. The 12.5kg weight means delivery and positioning will need a second pair of hands, and floor surfaces should be checked — the foot spread is 420mm, which is relatively compact.

This base is a practical choice for cafés and casual dining venues fitting out new seating areas or refreshing existing furniture. For venues that need heavier outdoor-rated bases or larger footprints for bigger table tops, it is worth reviewing the wider range before committing.

If you are fitting out a full dining area and want to make sure the base, top and layout all work together, our team is happy to talk it through before you order.