Flip Top and Auto Adjust

The FLAT Auto-Adjust SX26 EP is an aluminium dining table base designed for hospitality environments where practicality and space management matter. The flip-top mechanism allows table tops to fold upright so bases can be nested and stored efficiently — useful in venues that reconfigure their floor layout regularly or need to clear space outside of service.

The SX26 incorporates FLAT's PAD system — a patented hydraulic self-levelling mechanism built into the base. When a table is placed on an uneven or undulating surface, the PAD adjusts automatically without any manual intervention. This is particularly relevant for outdoor terraces, older buildings with worn or uneven floors, or anywhere that conventional fixed-leg bases tend to rock. The stabilisation also resets whenever the table is repositioned, which helps keep tables aligned when multiple tops are pushed together for larger covers.

The EP (Extra Protection) coating makes the SX26 a considered choice for outdoor use and coastal settings where standard aluminium bases may be more susceptible to corrosion over time. The aluminium construction keeps the base reasonably lightweight, which supports easier handling during daily layout changes.

• Flip-top mechanism for efficient stacking and storage between services
• Automatic hydraulic levelling on uneven or outdoor surfaces
• EP coating providing additional corrosion resistance for outdoor use
• Re-stabilises on relocation, supporting flexible layout arrangements

The SX26 is a practical choice for casual dining venues, outdoor terraces, bistros, and managed hospitality spaces where tables are moved frequently and floor conditions vary. If you are fitting out a larger venue with more demanding throughput requirements or need bases suited to heavier commercial table tops, it is worth discussing your specific table top dimensions and usage before ordering.

If you would like to talk through whether the SX26 is the right fit for your space, the team is happy to help.

The FLAT Auto Adjust SX26 is an aluminium bar height table base designed for commercial hospitality environments where floor conditions are imperfect and space efficiency during non-service hours matters. It combines a flip-top mechanism with self-stabilising hydraulic feet, making it a practical choice for venues that need to reconfigure or clear their floor quickly and reliably.

The SX26 uses FLAT's PAD system — a patented hydraulic actuator built into the base — which automatically levels the table on uneven or undulating floors without any manual adjustment from staff. This happens passively as the table is set down, which in a busy service environment removes a small but persistent operational frustration. The base also aligns automatically when tables are pushed together, which helps operators run consistent row layouts without individually checking each table.

The EP (Extra Protection) coating is applied over the aluminium construction to resist corrosion in outdoor settings and coastal environments where salt air would quickly degrade a standard finish. This makes the SX26 a sound choice for terraces, rooftop spaces, or seaside venues that need furniture capable of staying outdoors for extended periods.

• Flip-top mechanism enables fast, compact storage between services
• Self-levelling feet remove the need for staff to check or adjust tables
• EP coating provides long-term corrosion resistance in outdoor and coastal use
• Aluminium construction keeps the base manageable to lift and reposition
• Automatic alignment when tables are grouped simplifies room layouts

Installation is straightforward — the base accepts a standard top plate connection and is compatible with square tops up to 650mm and round tops up to 750mm in diameter. No fixings to the floor are required, which suits venues with restrictions on floor penetrations. It is worth confirming your intended tabletop size and shape before ordering to ensure compatibility.

The SX26 is well suited to bars, rooftop terraces, seaside restaurants, and any venue where bar height seating is used alongside regular floor reconfigurations. For indoor venues with level floors and no storage constraints, a fixed-height base may offer a simpler and more cost-effective solution. Where a venue operates at very high volume and needs maximum robustness, it is worth discussing whether a heavier-duty option would better fit the demands of the site.

If you are unsure whether the SX26 fits your floor conditions, tabletop specification, or venue layout, our team is happy to talk through the details before you commit.

The FLAT Auto Adjust SX26 is an aluminium dining table base designed with two practical features that address common front-of-house challenges: automatic self-levelling on uneven floors, and a flip-top mechanism that allows tables to be folded and stored compactly when not in use.

The base uses FLAT's PAD (Patented Actuator Device), a hydraulic self-stabilising system that adjusts automatically when the base is placed or moved. In practice, this means the table settles firmly on uneven or slightly sloped surfaces without any manual adjustment from staff — a genuine operational advantage in older venues, outdoor terraces, or any space where the floor is not perfectly level. There is no need to hunt for folded card or rubber wedges, and the table stays stable under normal dining use.

The flip-top mechanism is well suited to venues that need to reconfigure or clear the dining area at the end of service. Tables can be folded and stored against a wall or in a storeroom, reducing the space required overnight or between events.

• Self-levels automatically on uneven or sloped surfaces via hydraulic PAD technology
• Flip-top mechanism allows compact upright storage between service periods
• Lightweight aluminium construction at 5.2kg makes repositioning straightforward
• Suitable for indoor and outdoor use in hospitality environments
• Compatible with square and round table tops up to 800mm across

At 5.2kg, the base is light enough for a single staff member to move and store without difficulty. The aluminium build holds up well in everyday front-of-house use, though operators should note this is a dining-height base and is not suited to bar or counter-height applications without the appropriate top plate height.

This base works well for restaurants, cafes, bars, and event spaces that deal with imperfect floor conditions or need flexible table layouts. It is particularly useful where tables are regularly moved, stored, or reconfigured between covers. For higher-volume or heavier-duty environments, a more robust base specification may be worth considering.

If you are fitting out a new dining space or replacing existing bases across multiple tables, it is worth discussing your floor conditions and table-top sizes with us before ordering — small details can affect which specification works best for your setup.

The FLAT Auto Adjust SX26 is an aluminium bar height table base designed for commercial hospitality settings where floor stability and efficient storage both matter. The flip top mechanism allows the base to fold flat when not in use, which is a practical advantage in venues that need to reclaim floor space outside of service hours or rearrange layouts quickly between sittings.

The most operationally significant feature of the SX26 is its PAD system — a patented self-stabilising hydraulic mechanism built into the base. On uneven or slightly undulating floor surfaces, which are common in older premises, outdoor terraces, and period buildings, this system automatically compensates to keep the table stable without manual adjustment. That removes a persistent source of customer frustration and staff intervention during service.

Because the stabilisation resets each time the base is moved, aligning multiple tables for event layouts or combined covers is straightforward. The base is suitable for use with a range of round and square table tops.

• Flip top design folds flat for compact storage after service
• Self-stabilising on uneven indoor and outdoor surfaces
• Resets automatically when repositioned — no tools required
• Aluminium construction keeps the base light enough to handle easily
• Suitable for indoor and outdoor hospitality environments

It is worth confirming that your intended table top size falls within the supported dimensions before ordering, particularly for larger or heavier tops. The base is available in black and is well suited to bar, café, and restaurant environments that run bar-height seating as part of their layout.

If you are fitting out a larger space, mixing table heights, or unsure which base suits your floor type, our team is happy to talk it through with you.

The FLAT Auto Adjust ST22 EP is an aluminium dining table base designed for rectangular table tops, incorporating a flip-top mechanism that allows the table to be folded flat for compact storage or stacked efficiently with other bases when not in use. It is a practical choice for operators who need flexible dining layouts or who regularly reconfigure their floor plan.

The ST22 uses FLAT's PAD system — a patented hydraulic self-stabilising mechanism built into the base. When the table is placed or moved, the base adjusts automatically to compensate for uneven or undulating floor surfaces without any manual intervention. This is a useful feature in older venues, outdoor terraces, or any setting where perfectly level floors cannot be guaranteed. It removes the need for staff to fuss with levelling feet and reduces the likelihood of customer complaints about wobbly tables during service.

The EP (Extra Protection) coating gives this base good resistance to moisture and environmental exposure, making it suitable for covered outdoor areas, seafront venues, beer gardens, and similar settings where standard bases might corrode or degrade more quickly.

• Lightweight aluminium construction keeps handling straightforward when reconfiguring layouts
• Flip-top mechanism enables quick, compact storage between uses
• Automatic stabilisation works whenever the table is repositioned — no manual adjustment needed
• EP coating provides reliable protection in damp or coastal environments
• Compatible with rectangular tops up to 800 x 1200mm

This base is well suited to café bars, casual dining restaurants, event venues, and outdoor hospitality operators. It is a mid-range solution designed to balance practicality with durability. For heavier-use or larger fixed dining configurations, alternative bases with greater load capacity or a fixed-top design may be worth considering.

If you are unsure whether the ST22 suits your floor surface, environment, or table top size, we are happy to talk it through before you order.

The FLAT Auto Adjust ST22 is an aluminium flip top table base designed for commercial dining environments where efficient use of space and stable, level tables are both priorities. The flip top mechanism allows the table top to fold down flat against the base column, making it straightforward to stack and store multiple tables when floor space needs to be cleared quickly — useful for venues that regularly reconfigure their dining areas for events, private hire or cleaning.

Where the ST22 sets itself apart from a standard fixed base is its PAD system — a patented hydraulic self-stabilising mechanism built into the foot. On uneven or slightly bumpy floor surfaces, which are common in older buildings, outdoor terraces and covered external spaces, the base automatically adjusts to maintain a level, wobble-free table without any manual intervention from staff. This is a meaningful operational advantage in busy service periods, where a shaky table is a recurring complaint that takes time to address and disrupts the customer experience.

The base is well suited to rectangular table tops and is lightweight enough at 7kg for front-of-house staff to manage without difficulty during room resets.

• Flip top mechanism speeds up room resets and table storage
• Self-stabilising foot removes the need for wedges or manual adjustment
• Lightweight aluminium construction reduces handling effort during reconfiguration
• Suitable for indoor and outdoor use including uneven surfaces
• Black finish works across a range of dining room styles and colour schemes

This base is a practical choice for restaurants, bars, hotels and event spaces that need reliable, easy-to-manage seating at volume. If you run a high-turnover venue or need guidance on matching bases to specific top sizes or flooring conditions, our team is happy to talk it through before you order.

The FLAT Auto Adjust PX23 is a cast iron dining table base built around the brand's PAD system — a patented hydraulic stabilising mechanism that automatically compensates for uneven or undulating floor surfaces. Rather than relying on manual screw feet, the base self-adjusts whenever it is placed or repositioned, maintaining a level, wobble-free surface without any intervention from staff or customers.

In a busy front-of-house environment, table stability is one of those details that quietly affects the dining experience. Rattling crockery, tilting glasses and uncomfortable seating are common complaints in older venues with flagstone floors, worn wooden boards, or naturally uneven surfaces. The PX23 addresses this directly, and because it re-stabilises automatically on movement, it also simplifies the process of reconfiguring table layouts between covers — useful where tables are regularly pushed together or separated for different party sizes.

The Parisian-style profile suits venues with a European bistro aesthetic, intimate dining rooms, bars, and hotel restaurants where the base will be visible beneath the table top. Practical points to consider:

• Self-stabilising PAD hydraulic system requires no manual adjustment
• Top plate accommodates square tops up to 750mm and round tops up to 800mm
• Cast iron construction provides stable ballast and long-term durability
• At 17kg, the base is substantial — factor this into seating reconfiguration workflows
• Compatible with standard table tops; no proprietary fixing required

The PX23 is well suited to established restaurants, hotel dining rooms, and bars where floor levelness is inconsistent and table stability complaints have been an ongoing issue. It is a single-pedestal base, so it is best matched to two- or four-cover tops within the supported size range. For larger banqueting or conference table applications, a twin-pedestal or trestle solution would typically be more appropriate.

If you are specifying tables across a whole dining room or need guidance on base-to-top combinations for your specific floor type, it is worth having a conversation with us before ordering.

The FLAT Auto-Adjust KX36 is a cast iron dining table base designed to accommodate large table tops while actively compensating for uneven floor surfaces. At the centre of the design is FLAT's PAD system — a patented hydraulic actuator device built into the base that automatically levels and stabilises the table whenever it is placed or repositioned. This is a mechanical self-levelling solution, not a manual screw-adjust, which distinguishes it from standard pedestal bases.

In a busy front-of-house environment, an unstable table is a genuine operational problem — it disrupts service, irritates customers, and often requires floor wedges or folded card as a workaround. The KX36 removes that entirely. The PAD mechanism responds automatically, so the table stabilises without any intervention from staff. This is particularly useful in older buildings, converted premises, tiled dining rooms, or any venue where the floor is not perfectly level throughout.

The oversized top plate is proportioned to support larger table tops — suitable for square tops up to 1200mm and round tops up to 1500mm — making the KX36 a practical choice for venues that configure tables for groups rather than covers of two. The four-inch post provides a stable column for that extra top plate area.

• Automatic hydraulic self-levelling — no manual adjustment required by staff
• Suitable for large-format table tops, including extended round configurations
• Well suited to venues with uneven, tiled, or naturally varied floor surfaces
• Tables can be repositioned and realigned without re-levelling manually
• Cast iron construction provides the weight and stability expected in commercial settings

At 20.5kg, this is a substantial base. That weight contributes to stability under larger tops, but it is worth considering when planning layout changes or deep cleans. The base pairs with a wide range of standard and custom table tops, though it is worth confirming top size and fixing compatibility before ordering.

The KX36 is best suited to restaurants, bars, hotel dining rooms, and event venues where floor levelness varies and a consistently stable dining experience matters. For smaller table tops or tighter budgets, a standard fixed-post base may be sufficient. For high-density layouts where reconfiguration is frequent, the auto-adjust mechanism becomes particularly valuable.

If you are unsure whether the KX36 is the right specification for your tables and floor conditions, the team is happy to talk it through before you place an order.

The FLAT Auto-Adjust KX30 is a cast iron dining table base built around FLAT's PAD (Patented Actuator Device) — a self-stabilising hydraulic mechanism integrated into the base that automatically levels the table on uneven or undulating floor surfaces. The design follows a modern X-base profile and is intended as a straightforward replacement for existing table bases, fitting standard commercial table tops.

In busy front-of-house environments, wobbling tables are a persistent nuisance — both for guests and for staff who end up responding to complaints mid-service. The KX30 addresses this at the base level rather than relying on staff to wedge or shim tables manually. The self-levelling mechanism engages automatically when the base is placed or repositioned, which is particularly practical in older buildings, marquees, outdoor terraces, or any venue where floors are not perfectly flat. The cast iron construction gives the base the weight and stability needed to support active dining use without shifting.

Key operational characteristics worth noting:

• Self-stabilising hydraulic system eliminates the need for manual shimming
• Activates automatically when the base is moved or repositioned
• Allows multiple bases to be aligned consistently across a dining floor
• Compatible with table tops up to 1050mm in diameter or width
• Cast iron build provides solid, low-movement stability during service

Installation is straightforward — the base accepts a standard top plate connection and does not require tools or specialist fitting beyond attaching the table top. It is worth confirming your existing table tops are compatible with the top plate size before ordering. At 12kg, the base has a reasonable weight for front-of-house handling, though staff should be aware of this when repositioning tables regularly in a fast-turnaround setting.

The KX30 is well suited to restaurants, cafés, bistros, and event venues where uneven flooring is a known issue and manual levelling is not a practical solution during service. It is equally useful where tables are frequently reconfigured, as the auto-levelling removes a step from the reset process. For venues with very high table turnover or requiring heavier-duty commercial specifications, it is worth exploring whether an alternative base weight or fixing arrangement would better suit the operation.

If you are unsure whether this base will work with your existing table tops or floor conditions, our team are happy to talk through the specifics before you commit to an order.

The FLAT Auto-Adjust KX22 is a cast iron dining table base designed for use with smaller table tops, typically up to 750mm in diameter. Its defining feature is the PAD system — a patented hydraulic actuator built into the base that automatically compensates for uneven floor surfaces, keeping the table level and stable without manual adjustment.

In a busy hospitality environment, uneven floors are a common reality, particularly in older buildings, outdoor terraces, or areas with tiled or stone flooring. The KX22 addresses this without requiring staff intervention — when the table is placed or moved, the stabilising mechanism adjusts automatically. This is a practical advantage during service when time is limited and re-levelling tables manually is not a realistic option.

The self-stabilising design also makes it straightforward to push tables together for larger covers, as the base adjusts independently of adjacent tables, allowing multiple tops to sit flush and level.

• Suitable for table tops up to 750mm — well suited to café, bistro, and smaller dining settings
• Automatic floor compensation removes the need for manual levelling feet adjustments
• Cast iron construction provides the floor weight needed to keep smaller tops stable during service
• The 330mm top plate offers a clean, compact footprint appropriate for tighter layouts

At 10kg, the base is manageable for repositioning, though it has sufficient mass to anchor lighter table tops without tipping risk. It is worth confirming your floor loading requirements if the bases are to be used across a large seating area on a suspended floor.

The KX22 is best suited to cafés, restaurants, hotel lobbies, and contract hospitality venues using two- or four-seater configurations with tops up to 750mm. For larger table tops or higher-footfall venues requiring greater stability, a heavier-duty base from the range may be more appropriate.

If you are specifying bases across a full dining floor or working with non-standard top sizes, the team is happy to talk through what will work best for your layout.

The FLAT Auto Adjust KX22 is a bar height table base constructed from cast iron with a square angular foot profile. It is designed specifically for smaller table tops — accommodating square tops up to 600mm and round tops up to 650mm — making it well suited to compact bar and café seating layouts where space between covers is limited.

The defining feature of this base is FLAT's PAD system — a patented hydraulic actuator built into the column. Rather than relying on manual levelling feet, the mechanism automatically compensates for uneven floor surfaces. In practice, this means the base self-stabilises whenever it is placed or moved, without staff needing to crouch down and adjust anything. On older tiled floors, stone flags, or any surface with slight undulation — common in pubs, restaurants, and outdoor-covered areas — this removes a persistent source of customer complaints and front-of-house interruption during service.

From an operational standpoint, the auto-stabilisation also allows tables to be realigned and reconfigured quickly when combining covers, as each base adjusts independently on repositioning.

• Eliminates manual levelling — useful on uneven or worn floor surfaces
• Self-stabilises on movement, supporting quick cover reconfiguration
• Cast iron construction offers stability at bar height without a wide base footprint
• Compact square foot profile suits tighter floor plans

At bar height, the base is suited to high stool seating rather than standard dining. It is worth confirming your intended stool and table top heights are compatible before ordering, as bar height configurations vary. The cast iron construction adds meaningful weight at the base, which is appropriate for taller columns, though installation on very soft or uneven substrates should be considered carefully.

This base is most appropriate for smaller hospitality venues, café bars, and pub environments with compact table top requirements. Operators needing larger top compatibility or a standard dining height will find alternative bases in the range better suited to those requirements.

If you are fitting out a new space or replacing existing bases and want to talk through floor conditions, top sizing, or stool compatibility, our team is happy to help you work through the detail before you commit.

The FLAT Auto Adjust KT22 is a two-base table support system designed for rectangular and oval table tops in indoor hospitality environments. Each base features a three-pronged top plate, and the pair can be repositioned to suit a range of top sizes, giving operators flexibility when fitting out or reconfiguring a dining space. At 720mm in height, the system meets standard dining table height requirements.

The defining feature of the KT22 is FLAT's PAD technology — a patented hydraulic actuator built into each base that continuously self-stabilises on uneven or undulating floor surfaces. In older premises, listed buildings, or any venue where the floor is not perfectly level, this removes the need for manual levelling adjustments and eliminates table wobble during service without any action from staff or guests. The two-footed design on each base also means the spacing between bases can accommodate wheelchair users and mobility equipment, which is a practical consideration for operators with accessibility requirements.

From a front-of-house perspective, the main operational benefits are:

• Automatic stabilisation on rough or uneven floors without manual adjustment
• Flexible base positioning to accommodate different top sizes and layouts
• Wheelchair and mobility equipment access between bases
• Cast iron construction providing a stable, durable platform under daily use
• Consistent, wobble-free dining experience without ongoing staff intervention

Installation is straightforward — the bases are floor-standing with no fixings required in most applications. At 16kg for the pair, they are manageable but not lightweight, and the cast iron construction means care should be taken on delicate or polished flooring surfaces. The system is intended for indoor use only and is not suited to outdoor terraces or exposed areas.

The KT22 is well suited to restaurants, cafés, hotels, and function venues operating on older premises or any site where floor levelness cannot be guaranteed. It works well in spaces that require flexible table configurations or need to meet accessibility standards. For operators with larger or heavier table tops, or where significantly greater footprint stability is required, it is worth discussing whether an alternative base configuration would better suit the application.

If you're unsure whether the KT22 is the right base system for your floor conditions, top sizes, or layout requirements, our team is happy to talk it through with you.

The Bolero Aluminium Flip Top Table Base is a straightforward solution for venues that need to reconfigure seating layouts quickly or store tables efficiently when not in use. The flip-top mechanism allows the tabletop to fold flat against the base, so multiple tables can be nested together in a compact footprint — a practical advantage in function rooms, cafés, and event spaces where floor area is used for multiple purposes throughout the day or week.

Constructed from aluminium, the base is notably lighter than cast-iron or steel alternatives, which makes it easier for front-of-house staff to move and reposition without assistance. Despite its low weight, aluminium provides adequate rigidity for everyday table service, and the material holds up well in both indoor settings and covered outdoor areas. The black finish is a neutral choice that suits most room schemes without drawing attention to itself.

From an operational standpoint, the main advantages of this base are:

• Flip-top mechanism reduces storage footprint when tables are not in service
• Aluminium construction keeps individual table weight manageable for staff
• Pre-drilled fixing points simplify attachment of a compatible tabletop
• Suitable for indoor use and sheltered outdoor terraces
• Black finish works across a range of interior styles without clashing

The base is pre-drilled and designed to accept tabletops up to 700mm square, so it is worth confirming your chosen tabletop dimensions before ordering. It is not intended for heavy-duty banqueting use where tables may bear significant sustained load, and for high-traffic venues handling large daily covers, a heavier-duty pedestal base may offer greater long-term stability.

This base is well suited to cafés, small restaurants, hotel lounges, and event venues that need dependable, easy-to-store table furniture without overcomplicating the specification. If you are fitting out a larger space or have specific layout requirements, our team is happy to talk through what will work best for your situation.

The Bolero Flip Top Aluminium Table Base is a standard-height table base designed around a practical nesting mechanism — the top tilts to allow multiple bases to stack together in a compact footprint. Made from aluminium, it arrives flat-packed for straightforward self-assembly and is suitable for both indoor and outdoor settings.

In busy hospitality environments, the ability to reconfigure or store seating quickly between services is a genuine operational advantage. The flip top mechanism means bases can be nested and moved with minimal effort, making it a sensible choice for venues that regularly adjust their floor layouts — function rooms, cafés, pub dining areas, and event spaces in particular.

• Nesting flip top design reduces storage space compared to fixed bases
• Aluminium construction keeps the base lightweight without sacrificing stability
• Flat-pack delivery simplifies handling and self-assembly on site
• Suitable for indoor and outdoor use
• Compatible with 600mm square and round table tops, including Duroflat, Durolight, Compact Exterior, Lamidur, and Werzalit pre-drilled ranges

Installation is straightforward — no tools beyond basic assembly are required, and the base does not need floor fixing. The aluminium finish is weather-tolerant for covered outdoor terraces, though as with any base used outdoors, it is worth considering the surface levelness and whether the table top selected is appropriate for external conditions.

This base suits cafés, restaurants, hotels, and event venues that need flexible seating arrangements and efficient storage. It is best matched to moderate-volume settings with standard dining tables. For venues requiring heavier-duty bases or larger table formats, it is worth considering alternative options within the range.

If you are fitting out multiple covers or mixing table sizes and top materials, the team is happy to help you work through the right combination before you order.