Barrier Systems

This Bolero barrier post is a freestanding queue management unit designed for hospitality and public-facing venues. It features a retractable red strap that extends to 3 metres and a polished stainless steel column, making it suitable for directing foot traffic in entrances, lobbies, event spaces and waiting areas.

The weighted base keeps the post stable on smooth flooring without the need for fixing to the floor. At 8kg, it has enough mass to remain reliably upright under normal use whilst still being straightforward to reposition when your layout changes between service periods or events.

From a practical standpoint, this type of barrier works well in settings where you need clear, low-maintenance crowd guidance without the permanence of fixed barriers. Key operational advantages include:

• Quick to reposition — no tools or fixings required
• Polished finish presents well in customer-facing areas
• Retractable strap stores neatly within the post when not in use
• Compatible with other Bolero posts for longer queuing runs

There are no installation requirements — the post stands independently on any level surface. It is not intended for outdoor use in exposed conditions, as wind load on the strap can cause instability. For high-traffic venues or busier event environments where posts will be moved frequently, it is worth considering a higher-specification barrier system built for heavier continuous use.

This barrier is well suited to hotels, restaurants, airport lounges, ticketing areas and similar hospitality or leisure venues. It works best as part of a coordinated run of posts rather than as a single standalone unit.

If you are planning a larger queuing layout or need advice on post quantities and configurations, our team is happy to help you work through the requirements before you order.

This canvas barrier panel from Bolero is a straightforward, functional solution for managing queues or dividing a room into defined sections. Made from 100% polyester canvas, the panel is held taut by poles threaded through seams along the top and bottom edges, which then clip onto rings on compatible barrier posts at either side. The posts are sold separately, so it is worth confirming compatibility before ordering.

In practice, these panels are commonly used in restaurant front-of-house areas, event spaces, hotel lobbies, and canteens — anywhere that benefits from clear, visible boundaries without permanent fixtures. The canvas construction keeps the unit lightweight at under 2kg, making it straightforward to reposition between services or events.

• Defines queue lanes or waiting areas without blocking sightlines completely
• Sections off areas of a dining room during quieter service periods
• Quick to attach and remove between events or shifts
• Lightweight enough for a single person to handle and reposition
• Neutral black finish suits most hospitality and event environments

Being a fabric panel rather than a solid screen, it provides visual separation rather than acoustic or physical isolation. It is not intended for outdoor use or high-traffic environments where panels risk repeated physical contact. For larger or busier venues, wider or more robust barrier configurations may be a better fit.

If you are looking to kit out a venue with multiple barrier runs or need advice on compatible post systems, feel free to get in touch — we are happy to point you in the right direction before you order.

This is a freestanding crowd control barrier from Bolero, designed to manage queues and define pedestrian routes in hospitality and public-facing environments. The post is finished in polished stainless steel with a retractable black strap extending up to 3 metres, and the weighted base keeps the unit stable on smooth flooring without the need for wall fixings or floor anchors.

In practice, these barriers are well suited to front-of-house areas where you need a presentable, repositionable solution for directing guests — whether that's managing a queue at a hotel reception, controlling access at an event venue, or organising waiting areas in a restaurant or bar. The polished finish holds up well in busy public spaces and is straightforward to wipe down between service periods.

A few practical points worth considering before purchasing:

• Freestanding design — no installation required, simply position and deploy
• Weighted base provides reliable stability on level, hard flooring surfaces
• Retractable black strap clips securely to adjoining posts or fixed points
• Polished stainless steel finish is durable and easy to keep clean
• Suitable for indoor use in hotels, restaurants, bars, airports and event venues

These barriers work well in multiples, and the connection system allows you to link units together to create continuous queue lines of varying length. If your site has uneven flooring or requires outdoor use, it's worth checking compatibility before ordering — the weighted base performs best on flat, hard surfaces.

If you're unsure how many posts you need for a particular space or event layout, we're happy to help you work through the requirements.

This canvas barrier banner from Bolero is a straightforward, practical accessory for managing pedestrian flow or dividing a space into defined sections. Made from 100% polyester canvas in green, it is held taut by poles threaded through seams at the top and bottom, which then clip to rings on compatible barrier posts at either end. Barrier posts are sold separately.

In busy front-of-house environments — queuing areas, buffet layouts, event spaces, or hospitality venues — a reliable physical barrier helps guide guests and staff without the need for permanent fixtures. The canvas construction keeps the unit lightweight at under 2kg, making it straightforward to reposition between service periods or store away when not required.

• Polyester canvas resists tearing under regular handling
• Pole-and-seam construction keeps the banner taut and presentable
• Clips to standard barrier post rings — no tools required
• Lightweight build allows quick repositioning between services
• Green finish suits a range of venue environments

Installation is minimal: the poles thread through the top and bottom seams, and the assembly clips directly onto compatible barrier posts. No fixings into floors or walls are required, which suits venues where layouts change frequently. It is worth confirming post compatibility before ordering, as clip fittings can vary across barrier post ranges.

This banner suits cafés, canteens, event venues, hotels, and similar hospitality environments where queue management or space division is needed on a flexible basis. It is a single-width panel, so operators managing larger areas or longer queue runs will likely need multiple banners and additional posts to achieve full coverage.

If you are unsure how many banners and posts your layout requires, or whether this width suits your space, feel free to get in touch — we are happy to help you work it out before you order.

These Bolero barrier posts are a straightforward crowd management solution commonly used in restaurants, hotel lobbies, event venues, and public-facing commercial spaces. Each post stands at 960mm and features a flat, weighted base that sits firmly on the floor without the need for any fixings, making them easy to position and reposition as layouts change.

The flat drum top includes a slotted collar designed to accept rope barriers, which are sold separately. This gives operators a clean, consistent look when cordoning off areas, managing queues, or directing foot traffic during busy service periods. The brushed stainless steel finish is hardwearing, resistant to surface marking, and straightforward to wipe down at the end of service.

In practical front-of-house use, these posts hold up well under regular handling. The flat base design keeps each post stable on smooth floor surfaces and also incorporates a stacking gap, so units can be stored neatly together when not deployed — useful where storage space is limited.

• Flat weighted base provides stable, free-standing placement on smooth floors
• Slotted collar on drum top accepts standard rope barrier connections
• Stacking gap in base allows compact storage when posts are not in use
• Brushed stainless steel construction suits both indoor and outdoor environments
• Supplied as a pack of two, ready to use straight away

It is worth noting that the flat base performs best on level, smooth flooring. On uneven or heavily textured surfaces, stability may be reduced, and a heavier or wider-base alternative may be worth considering for high-traffic outdoor settings. At 9kg per post, they have enough weight to resist casual knocks without being difficult to move and reposition manually.

These posts are well suited to restaurants, cafés, hotels, event spaces, and any venue that needs a smart, reusable barrier solution. If you are equipping a larger site or need posts that will see particularly heavy use, it is worth having a conversation with us about the most appropriate specification for your setup.

This is a 1.5-metre soft-textured rope barrier from Bolero, finished in black with zinc alloy end fittings. It is designed to connect to compatible posts or wall-mounted brackets to form a managed queue or crowd guidance line. It is a straightforward, practical piece of front-of-house furniture commonly used in restaurants, hotels, event venues, and cafeterias.

In day-to-day use, rope barriers like this help operators direct customer flow at entry points, reception areas, buffet queues, and ticketed events without the need for permanent fixtures. The zinc alloy end fittings give the rope a degree of durability that cheaper plastic-ended alternatives tend to lack, and the soft-textured rope keeps the overall appearance smart enough for customer-facing environments.

• Helps manage customer queuing and guest flow at entry and service points
• Connects to wall brackets or freestanding posts for flexible configuration
• Zinc alloy ends provide more robustness than standard plastic fittings
• Lightweight enough to reposition quickly between service periods
• Black finish suits most front-of-house colour schemes

There are no installation requirements as such — the rope simply clips between posts or brackets. It is worth ensuring the posts or wall fittings you intend to use are compatible with this rope's end fittings before ordering. If you are fitting out a larger area or need a different rope length or colour, it is worth having a conversation with us first to make sure the configuration works as a complete system.

These Bolero barrier posts are a practical crowd management solution for venues that need to direct footfall, section off areas, or manage queues without permanent fixtures. Each post stands at floor level on a flat, weighted base that provides reliable stability on hard flooring without the risk of tipping under light contact — a useful characteristic in busy front-of-house environments where guests move unpredictably.

The flat drum top features a slotted collar designed to accept rope barriers, making it straightforward to configure cordoned routes or waiting areas. The base also incorporates a stacking gap, so when the posts are not in use they store compactly without taking up unnecessary floor space — a consideration worth bearing in mind if storage is limited.

Constructed from powder coated steel, the posts are suited to both indoor and outdoor use and clean down easily. In practice they are commonly used in hotel lobbies, restaurants, event spaces, and exhibition venues where a tidy, consistent appearance matters alongside function.

• Stable weighted flat base reduces tipping risk on smooth flooring
• Slotted collar accommodates rope barriers for flexible queue layouts
• Stacking base gap allows compact storage between events
• Powder coated steel finish suits indoor and outdoor environments
• Sold as a pack of two for immediate paired deployment

It is worth noting that rope barriers are sold separately, so if you are setting up a new barrier run it is worth confirming compatibility with your chosen rope style before ordering. For higher-volume sites or large event spaces requiring extended barrier runs, heavier-duty or higher-capacity options may be worth considering.

If you are unsure how many posts your layout requires or which rope style works best with these, we are happy to talk it through.

This is a 1.5m red twist barrier rope from Bolero, finished with stainless steel clip ends. It is designed to connect to compatible Bolero barrier posts and wall-fixing brackets, allowing operators to create queuing lines, section off areas, or guide foot traffic through a space in an orderly way.

Barrier ropes of this type are commonly used in restaurant entrances, hotel lobbies, event venues, and hospitality settings where some degree of crowd management or space definition is needed without the visual weight of fixed barriers. The red twisted cord gives a reasonably smart appearance that suits both formal and casual environments.

The stainless steel clip ends provide a secure connection to posts and are more resistant to corrosion and surface wear than chrome-plated alternatives, which matters in higher-traffic or outdoor-covered settings where fittings take frequent handling.

At 1.5m, this rope suits standard post spacings and works well in most entrance or corridor configurations. For wider spans or larger areas, longer rope lengths are available, and for smaller or tighter layouts, shorter options exist within the same range.

If you are fitting out a queuing system from scratch or need to confirm compatibility with existing posts or wall brackets, we are happy to help you work through the layout before you order.

This chrome-plated barrier chain from Bolero is a straightforward queuing and crowd management accessory, designed to connect compatible barrier posts and create defined walkways, queuing lanes, or section dividers in hospitality and catering environments.

In practical use, barrier chains like this are commonly found in restaurant reception areas, buffet service layouts, hotel lobbies, and event catering setups where light-touch crowd direction is needed without the bulk of retractable belt barriers. The chrome finish gives a reasonably smart appearance that suits front-of-house settings.

At 1.5m in length, this chain is suited to moderate post spacing. It is a lightweight solution and is not intended for heavy-duty crowd control or high-pressure queuing situations — for busier or more demanding environments, a more robust barrier system would be worth considering.

Installation is straightforward: the chain clips directly onto compatible Bolero barrier posts (designed for use with the DF010 post). No tools are required. It is worth confirming post compatibility before ordering if you are working with an existing barrier setup from a different range or supplier.

This chain is well suited to cafés, restaurants, hotels, and event spaces that need a simple, presentable way to guide guests or define areas without a permanent fixture. If you are putting together a full barrier layout and are unsure how many chains or posts you need for your space, feel free to get in touch — we are happy to help you work it out.

This is a replacement or additional barrier rope from Bolero, finished in red with chrome-effect zinc alloy end fittings. It is designed to work with compatible Bolero barrier posts and wall-mounted fixing points, making it a straightforward way to extend or maintain an existing queue management or crowd control setup.

Barrier ropes of this type are commonly used in front-of-house areas, entrance lobbies, waiting areas, and event spaces where guests need to be guided or queues managed in an orderly way. The twist construction gives a traditional, presentable appearance that suits hotel lobbies, restaurants, and venues where the barrier system needs to look neat rather than purely functional.

• Red twist rope with a smart, presentable finish for customer-facing areas
• Chrome zinc alloy end fittings for a clean, durable connection
• Compatible with Bolero barrier post and wall fixing systems
• Suitable for queue management, entrance control, and sectioning spaces

It is worth confirming compatibility with your existing posts or wall fixings before ordering, as barrier rope fittings are not universally interchangeable between manufacturers. If you are building a new setup from scratch or are unsure which posts or fixings to pair this with, we are happy to help you put together the right combination.

This is a 1.5m replacement or additional rope for use with Bolero barrier post systems. It features a soft textured red rope with domed brass-finish ends, designed to connect between compatible Bolero upright posts to form a crowd guidance or queue management barrier.

Barrier ropes of this type are commonly used in restaurant entrances, hotel lobbies, event spaces, and queuing areas where a clean, presentable boundary is needed without the bulk of a solid barrier. The brass-finish ends give a more formal appearance suited to front-of-house environments where presentation matters alongside practicality.

The rope is straightforward to fit and remove, which makes it easy to reconfigure your barrier layout as covers, events, or footfall patterns change. If you are building out a new barrier run or replacing a worn rope on an existing setup, it is worth confirming post compatibility before ordering — not all barrier post systems use the same end fittings.

If you are unsure how many ropes you need for a particular layout, or whether this rope is the right fit for your existing posts, feel free to get in touch with the team.

These Bolero retractable strap barriers are a straightforward crowd management solution for commercial venues. Each post is finished in polished stainless steel with a weighted base and a retractable black strap that extends to 3 metres, allowing you to form queue lines, close off sections, or separate spaces quickly without permanent fixtures.

In practice, these barriers are well suited to front-of-house environments where flexibility matters — controlling entry queues during busy service periods, marking off reserved areas, or guiding guests through a venue layout. The weighted base provides reliable stability on level indoor flooring and holds reasonably well in light outdoor use, though in exposed or high-traffic outdoor settings, additional precautions may be worth considering.

The key practical advantages for venue operators include:

• Quick to deploy and reconfigure without tools or specialist knowledge
• Retractable strap mechanism allows clean, compact storage between uses
• Polished finish suits smarter front-of-house environments without looking utilitarian
• Smooth surfaces wipe down easily, keeping maintenance straightforward
• Sold in pairs, reducing per-unit cost for venues needing multiple posts

These barriers are best suited to restaurants, bars, hotels, and event spaces needing a presentable, flexible queue management solution. For larger venues or high-footfall sites where more posts are needed across a greater floor area, it is worth considering how many packs your layout requires before ordering.

If you are unsure how many barriers your venue needs or how best to configure them for your space, the team is happy to talk it through.

These brushed brass barrier posts from Bolero are a practical crowd-management solution for hospitality venues where presentation matters as much as function. Supplied as a pack of two, they are commonly used in bars, restaurants, hotel lobbies, nightclubs, and event spaces to guide queues, define waiting areas, or separate sections of a room without the need for permanent fixtures.

Each post features a slotted collar at both the top and the base, allowing straightforward attachment of barrier ropes or canvas panels. The weighted flat base provides a stable footprint on hard flooring and holds its position reasonably well in light outdoor conditions, though posts of this type are primarily intended for indoor or sheltered use. The brushed brass finish gives a polished, considered appearance that sits comfortably in more upscale or styled environments without looking out of place.

From an operational standpoint, the posts are quick to position and reposition as layouts change, which is useful for venues that reconfigure for private hire or varying service formats. They wipe down easily and require no tools to set up or move. Key practical points worth noting:

• Compatible with Bolero barrier ropes and canvas panels (sold separately)
• Slotted collar design at top and base for flexible rope or panel attachment
• Weighted base supports freestanding stability without floor fixings
• Brushed brass finish suits formal and semi-formal venue aesthetics
• Lightweight enough to move between service areas as required

These posts are well suited to venues with moderate footfall requirements. For higher-traffic environments or outdoor events where greater robustness is needed, a heavier-duty post may be worth considering. If you are unsure which specification is right for your setting, we are happy to help you work through the options.

The Bolero Chrome Wall Fixing is a mounting bracket designed to anchor barrier rope to a wall surface, allowing operators to create fixed queue lines or crowd management barriers without relying solely on freestanding posts.

In practice, wall fixings like this are useful where a barrier run begins or ends at a wall — common in restaurant entrances, takeaway queues, event spaces, and hotel lobbies. Attaching one end to the wall keeps the barrier taut and reduces the risk of it being knocked out of position during busy periods.

The chrome finish is consistent with Bolero's broader barrier rope range, so it sits cleanly alongside matching posts and fittings rather than looking like an afterthought. Installation is straightforward, though you will need to ensure the fixing is secured to a suitable wall substrate — plasterboard alone is unlikely to provide adequate hold under repeated tension.

This fixing is intended for use with Bolero's blue barrier rope. If you are working with a different rope colour or a heavier-duty barrier system, it is worth checking compatibility before ordering.

If you are putting together a complete barrier system and are unsure which combination of posts, ropes, and wall fixings will work for your space, we are happy to talk it through.

This wall mounted barrier strap from Bolero is a practical queue management and access control solution for hospitality venues, retail environments, offices and event spaces. A retractable strap extends up to 3 metres and locks into a receiver mounted on the opposite wall or post, allowing operators to define pedestrian routes, manage queuing, or restrict access to specific areas without the need for freestanding stanchions.

The unit is housed in stainless steel with a black strap finish and includes an integrated safety catch that prevents the strap from being pulled out beyond its intended reach or retracting sharply. The slow-retraction mechanism means the strap winds back smoothly under control, reducing the risk of injury in high-traffic settings — a useful consideration in busy front-of-house environments where staff and guests are moving quickly.

From an installation standpoint, the unit is wall-fixed and comes with the necessary fixings and a receiver end. No specialist tools are required, though fixing into solid masonry or a suitable stud will give the most secure result. It is worth checking the fixing surface before installation, particularly in older buildings where wall construction can vary.

This barrier strap is well suited to smaller hospitality venues, cafés, reception areas, and event spaces where a discreet, permanent queue guide is more appropriate than a freestanding barrier system. For larger or higher-traffic environments requiring wider coverage or more flexible configurations, a multi-unit installation or a heavier-duty barrier system may be worth considering.

If you are unsure whether this unit suits your layout or access control requirements, our team is happy to talk it through with you.

This is a freestanding, folding privacy screen designed for use in clinical and care environments where patient dignity and flexible space management are both priorities. It provides a temporary visual barrier that can be positioned quickly around a bed, treatment area or consultation space, then folded flat and moved on when no longer needed.

In practice, the fold-away construction means nursing staff or therapists can deploy and pack away the screen without tools or significant effort. That ease of use matters in busy wards or treatment rooms where time is limited and layouts change throughout the day. The ergonomic castors allow the screen to be wheeled smoothly from one location to another rather than lifted and carried, which is a practical consideration given the dimensions involved.

The practical advantages of this design include:

• Folds to a compact profile for storage in tight spaces
• Castors allow repositioning without lifting
• Quick deployment during consultations or treatment
• Suitable for hard or resilient floor surfaces
• Lightweight enough for single-person handling at 9.6kg

At 1700mm high, the screen provides a full standing-height visual barrier, which is appropriate for most clinical settings. It is worth considering whether the width is sufficient for your intended space — in open ward layouts or larger treatment rooms, more than one screen may be needed to create adequate enclosure.

This screen is well suited to nursing homes, first aid rooms, GP practices, therapy centres and similar care environments. It is not a fixed partition and should not be used where a permanent or structural privacy solution is required. If you need screens with different panel configurations or fabric options, it is worth exploring the broader range before committing.

If you are unsure whether this screen suits your layout or care environment, the team is happy to talk it through with you.