Rectangular and Other Table Tops

1200(L)x700(W)x25(H)mm. Pre-drilled holes

32(H)x1200(W)x700(D)mm. Fitted with anti-warping braces

Combining timeless beauty with excellent durability, this rectangular dark walnut table top is designed to excel in commercial spaces. The 1200x700mm table top is manufactured from premium timber from managed sources, which is able to handle the rigours of daily use. Boasting a 25mm thickness, it is built to withstand the demands of busy commercial spaces.

32(H)x1200(W)x700(D)mm. Made from premium timber

25(H)x1200(L)x700(W)mm. Gold-effect metallic ABS edging

25(H)x1200(L)x700(W)mm. Scratch & heat resistant

12(H)x1190(L)x690(W)mm. UV, stain & heat resistant

12(H)x1190(L)x690(W)mm. UV, heat & stain resistant

12(H)x1190(W)x690(D)mm. Stain, UV & heat resistant

12(H)x1190(L)x690(W)mm. Stain, UV & heat resistant

12(H)x1190(L)x690(W)mm. Stain, UV & heat resistant

1190(L)x690(W)x12(H)mm. Scratch and heat resistant

48(H)x700(W)x700(L)mm. Pre-drilled for easy assembly to base

1100(L)x700(W)x50(H)mm. Pre-drilled for easy assembly with table bases

This 700mm square table top from Bolero is made from tempered glass finished with a light grey stone effect and a white trim. It is a straightforward, practical surface for two-seat covers in cafés, bistros, restaurants, and outdoor hospitality settings. The stone-effect finish gives the appearance of a solid material surface without the weight of stone, and the tempered glass construction means the top is both harder-wearing and safer than standard glass if breakage does occur.

In day-to-day service, the non-porous glass surface is quick to wipe down between covers with no grout lines, joins, or textured traps to hold moisture or residue. The stain and scratch resistance of the surface holds up well under the routine wear of a busy front-of-house environment, though like any glass surface it benefits from reasonable care with heavy crockery or glassware.

• Non-porous surface wipes clean quickly between covers
• Stain and scratch resistant finish for everyday service use
• Suitable for both indoor and outdoor settings
• Pre-drilled for straightforward attachment to compatible Bolero table bases
• Delivered flat-packed with fixings included

The top arrives pre-drilled to align with Bolero's range of table bases, which simplifies assembly and avoids the need for any specialist tools on site. It is worth confirming base compatibility before ordering, as the pre-drilled fixing pattern is designed around Bolero's own base range rather than universal fittings.

At 700mm square, this top suits a standard two-seat setting and works well in tighter dining layouts where space between tables is managed carefully. It is a practical choice for operators furnishing outdoor terraces, pavement areas, or compact indoor covers where a clean, contemporary look is needed without high maintenance demands.

If you are equipping a larger site or need a different size or shape to suit your layout, it is worth having a conversation with the team before placing your order.

This 700mm square table top from Bolero uses toughened tempered glass with a printed wood grain effect surface, finished with a grey trim. It is designed to sit on compatible table bases and is suitable for both covered outdoor areas and indoor dining spaces, making it a practical choice for cafés, bistros, bars, and casual dining operations looking for a consistent look across different seating zones.

The wood grain effect gives the appearance of a natural timber surface without the maintenance demands that real wood brings in a commercial setting. The tempered glass construction means the surface resists staining and scratching under everyday service conditions, and because there are no joints or grain to trap debris, wiping down between covers is straightforward. At a 700mm square format, it suits a two-cover setting comfortably or works well as a compact single in a tight floor plan.

• Stain and scratch resistant surface — easy to wipe clean between services
• No dirt traps or surface joints to complicate cleaning
• Pre-drilled for direct attachment to Bolero-compatible table bases
• Suitable for covered outdoor and indoor use
• Supplied flat-packed with fixings included

The top arrives pre-drilled to align with Bolero's standard base range, so fitting is straightforward provided you are using a compatible base. It is worth confirming base compatibility before ordering, particularly if you are working with existing bases from a different supplier. At 7.8kg the top is manageable for repositioning, though the tempered glass construction means care should be taken during handling and storage to avoid edge impact.

This table top suits smaller dining covers — a two-seat format in a café, a terrace bar, or a compact bistro interior. It is well suited to operators who want a consistent decorative finish that holds up to regular cleaning. If your operation runs larger table configurations or requires heavier-duty surfaces for high-turnover environments, there are broader and more robust options worth considering.

If you are unsure whether this top is compatible with your existing bases or are planning a larger furniture fit-out, the team is happy to talk through what will work best for your space.

This 700mm square table top from Bolero is made from tempered glass with a dark stone-effect surface and a white trim surround. It is designed for use in cafés, bistros, restaurants, and outdoor dining areas where a clean, contemporary aesthetic is needed without sacrificing practicality.

Tempered glass handles everyday hospitality use well. The surface resists staining and light scratching, and because there are no grout lines, texture traps, or recessed joins, it wipes down quickly between covers — a practical consideration during a busy lunch or evening service. The dark stone effect also disguises minor marks that would be more visible on a lighter surface.

• Stain and scratch resistant surface for sustained front-of-house use
• No dirt traps — quick to clean between services
• Suitable for indoor and outdoor settings
• Pre-drilled to fit Bolero's range of table bases
• Supplied flat-packed with all fixings included

At 700mm square, this top suits a table-for-two setting comfortably, or works as a compact option where space is at a premium. It arrives pre-drilled for attachment to Bolero's own table base range, which simplifies setup. If you are working with a different base supplier, it is worth confirming compatibility before ordering.

This top is well suited to smaller hospitality operations, café terraces, and breakout or courtyard spaces. If you need a larger surface for group covers or a heavier-duty top for high-turnover environments, alternatives are available within the range.

If you are unsure which base or size works best for your layout, the team is happy to talk it through.

This square tempered glass table top from Bolero measures 700mm x 700mm and presents a dark granite-effect finish with a white trim border. The surface is made from toughened tempered glass, which gives it considerably better resistance to knocks, scratches and staining than standard glass or many laminate alternatives. It is a practical, mid-sized table top well suited to two-person covers in cafés, bistros, restaurants and outdoor terrace areas.

In service, the non-porous glass surface wipes down quickly between covers without absorbing spills or harbouring bacteria — a practical consideration in busy table-turn environments. There are no grout lines, recesses or textured edges to catch debris, which keeps cleaning straightforward during and after service.

• Pre-drilled for compatibility with Bolero's range of table bases
• Stain and scratch resistant tempered glass surface
• Suitable for both indoor and outdoor use
• No dirt traps — wipes clean quickly between covers
• Supplied flat-packed with all fixings included

The top arrives flat-packed with fixings included and comes pre-drilled for attachment to Bolero's table bases, which simplifies assembly. At 700mm square it works well in moderate-density seating layouts but may feel compact in higher-end dining settings where more generous table space is expected. It is worth confirming base compatibility before ordering, particularly if you are pairing it with bases already in use.

This top is a sensible choice for operators furnishing café, bistro or terrace spaces who want a contemporary look without the maintenance demands of natural stone or timber. If you need larger tops or different shapes to suit your floor plan, alternatives are available in the range. Feel free to get in touch if you would like guidance on matching tops and bases for your layout.

This rectangular tabletop from Bolero is a ready-to-fit surface designed to pair directly with compatible Bolero table bases. Made from rubber wood with a natural finish, it comes pre-drilled so that assembly with the appropriate base hardware is straightforward — no additional templating or drilling required on site.

Rubber wood performs reliably in indoor hospitality settings under everyday service conditions. It holds up well with proper care, though it is not suited to outdoor use or areas where moisture exposure is likely. The natural finish is neutral and unassuming, sitting comfortably across cafés, restaurants, hotel dining rooms, and breakout spaces without dictating a particular aesthetic.

At 1100 x 700mm, the top seats two people with room to spare, or can accommodate a small three-cover arrangement depending on your layout and chair sizing. Weighing 14kg, it is manageable during installation but has a solid, settled feel once fitted.

• Pre-drilled fixing points ready for direct assembly with Bolero bases
• Neutral natural finish suits a wide range of indoor hospitality settings
• Practical size for two-cover or small three-cover table arrangements
• Indoor use only — not suitable for outdoor or high-moisture environments
• Rubber wood construction offers reasonable durability under regular service

If you are fitting out multiple tables, mixing sizes, or need to match an existing finish scheme, it is worth confirming base compatibility before ordering in volume. The team are happy to help work through the details.

This rectangular table top from Bolero is a practical, mid-range surface option for commercial dining rooms, cafés, bars, and similar hospitality settings. The marble effect finish is produced using a heat-sealed decor layer over a high-density woodchip core — giving the appearance of stone without the associated cost, weight, or fragility of natural marble.

In day-to-day service, the surface performs reliably under the kind of consistent use a busy dining area demands. The heat-sealed layer resists heat from crockery and hot plates placed directly on the table, while the melamine-style finish handles the minor scuffs and marks that accumulate through regular covers. PVC edge banding protects the perimeter against moisture ingress — a common point of deterioration on lower-grade table tops — and makes wiping down between sittings a straightforward job for front-of-house staff.

• Marble effect finish suits a broad range of contemporary and traditional interiors
• Heat-sealed decor layer resists heat from hot crockery and serving dishes
• Scratch-resistant surface retains appearance through regular, heavy use
• PVC edge banding protects against moisture and simplifies between-cover cleaning
• Pre-drilled fixing points reduce fitting time when paired with a compatible base

The top arrives pre-drilled, which speeds up fitting when used with a compatible Bolero table base. It is worth confirming that your chosen base accepts this size and matches the drilling pattern before ordering, as configurations do vary. At 16kg, the top is manageable for a two-person installation. The 1100 x 700mm footprint seats four covers comfortably in most rectangular dining layouts, though in tighter spaces it is worth measuring aisle clearance carefully before committing to this size.

This top suits cafés, pub dining rooms, hotel restaurants, staff canteens, and similar settings where a clean, presentable finish is required alongside practical durability and sensible cost. It is not intended for outdoor use. If you are fitting out a larger number of covers or need a different size, finish, or a surface rated for heavier commercial use, there are alternative options worth considering.

If you are working through a larger fit-out or want to confirm compatibility with your existing bases, we are happy to talk it through before you place an order.

This Bolero rectangular table top is a practical, ready-to-fit surface solution for front-of-house use in cafés, restaurants, pubs, and similar hospitality venues. Finished in a rustic oak decor, it works across a range of interior styles without looking out of place. The pre-drilled fixing points mean it can be fitted to a compatible pedestal or frame base quickly, without any on-site fabrication.

The top is constructed from high-density woodchip with a heat-sealed decor finish — a well-proven combination for busy front-of-house environments. The surface handles the everyday wear that comes with continuous table service: incidental heat from warm plates, routine spillages, and the general knocks of a working dining room. It will not perform like solid hardwood under prolonged abuse, but for the typical demands of café and casual dining use it holds up reliably and stays presentable without significant maintenance effort.

Key practical advantages for operators include:

• Pre-drilled fixing points allow fast fitting to compatible pedestal or frame bases
• Heat-sealed surface resists staining, surface scratching, and incidental heat from crockery
• Consistent rustic oak finish supports a uniform look across a matched table set
• Manageable weight makes reconfiguring table layouts practical for front-of-house staff
• No specialist tools or fabrication required for assembly

This footprint seats two comfortably and four at a push, making it a practical choice for mid-sized dining rooms and casual dining settings. It is worth confirming that the fixing pattern matches your intended base before ordering, as pre-drilled patterns are not universal across all manufacturers and base types. If this size does not suit your layout, smaller café tops and larger formats are available within the Bolero range.

If you are furnishing a new venue or working through a refurbishment and want to talk through base compatibility, sizing, or quantities, the team is happy to help you work it out before you commit to an order.

This Bolero rectangular table top is a practical, ready-to-assemble surface for hospitality and foodservice interiors. At 1100mm wide by 700mm deep, it provides a comfortable two-to-four cover layout and arrives pre-drilled to accept compatible pedestal or leg bases, so no additional site preparation is needed before fitting.

The top is constructed from high density woodchip board with a heat-sealed decor finish in Urban Dark — a dark wood-effect tone that reads well across a range of dining environments, from pub dining rooms and casual restaurants through to café seating areas. The heat-sealed surface resists everyday scratching and surface marking during service, and the PVC edge strip running the full perimeter protects the most moisture-vulnerable point of the top, keeping the profile neat over time.

From an operational standpoint, the practical advantages include:

• Pre-drilled fixing points allow straightforward assembly with matching Bolero bases
• Heat-sealed decor surface resists scratches and marking during busy service
• PVC edging protects against moisture ingress and simplifies daily cleaning
• Dark finish helps conceal light surface soiling between cleans at peak periods
• Consistent finish suits mixed dining environments without specialist treatment

At 16kg, the top has enough substance to sit firmly without being difficult to move during a layout change. It is intended for indoor use only — the woodchip construction and edge treatment are not suitable for outdoor or semi-outdoor settings where prolonged moisture exposure is a concern.

This size works well as a standard dining table in pubs, cafés, and casual restaurants. Operators needing a more compact top for tighter floor plans, or a larger surface for group covers, will find alternative sizes within the same Bolero range.

If you are working out which base configuration pairs correctly with this top, or planning table density across a new or refurbished dining space, our team is happy to talk it through before you commit to an order.

This rectangular table top is finished in a walnut-effect laminate over a solid substrate, producing a surface with enough rigidity for everyday commercial dining use. At 1200x700mm it covers a practical footprint for café, restaurant, and pub dining room settings, and the walnut finish gives a warm, neutral tone that sits comfortably across a range of interior styles.

In a busy dining room, table tops take consistent punishment — trays, crockery, repeated wiping with cleaning products, and the general wear of high-turnover service. The laminate surface on this top is hardwearing enough to resist the surface staining and minor abrasion that comes with regular use, and it holds its appearance without requiring specialist maintenance or periodic refinishing. That reliability matters when you are managing a large number of covers and cannot afford downtime for repairs.

From a practical standpoint, the top offers a few straightforward advantages worth noting:

• Wipe-clean laminate surface handles high-turnover dining without specialist care
• Resistant to everyday staining from food, drink, and cleaning products
• Consistent walnut finish works across varied interior schemes
• Suitable for covered outdoor dining areas as well as indoor use
• Fits to standard table bases without modification in most cases

The 1200x700mm size works well for two- or four-cover settings depending on your layout and chair spacing. It is worth confirming base compatibility before ordering, as fixing patterns and column positions vary between manufacturers. At 11.2kg, the top is manageable to handle and fit, though a second pair of hands is sensible when securing it to a base.

This is a practical mid-range option for operators who need a presentable, durable surface without the lead time or cost of bespoke joinery. If you are fitting out a larger number of covers, need a different size, or want to discuss how this sits within a broader furniture scheme, the team is glad to talk it through with you.

This 1200x700mm table top is finished in a planked oak laminate — a practical choice for commercial dining spaces where the warmth of a timber aesthetic is wanted without the upkeep that solid wood demands. The laminate surface replicates the appearance of planked oak consistently across multiple tops, which matters when fitting out a dining room or terrace where a uniform look is important.

In day-to-day service, the surface holds up reliably against the kind of wear commercial dining brings: repeated wiping between covers, the occasional knock from a tray or chair, and varying light exposure in mixed indoor and covered outdoor settings. It resists staining without needing sealing or refinishing, which keeps front-of-house maintenance straightforward.

• Laminate surface resists stains, scratches, and UV fading
• Consistent planked oak appearance across multiple tops
• Wipe-clean finish requires no sealing or periodic refinishing
• Suitable for indoor dining and covered outdoor areas
• Manageable weight makes repositioning practical when layouts change

At 1200x700mm, this top comfortably accommodates two to four covers and fits standard commercial base frames. Fixing centres and frame profiles do vary between manufacturers, so it is worth confirming compatibility with your existing bases before ordering. This is a top only — bases are selected separately.

It is well suited to casual dining restaurants, pub dining rooms, hotel breakfast areas, and café terraces looking for a warm, approachable finish without the maintenance commitment of real wood. Operators fitting out larger spaces or mixing top sizes across a room may find it useful to discuss their layout before ordering — the team is glad to help you work through the options.

This 1200x700mm table top is finished in a concrete-effect laminate, offering the visual weight and texture of a stone or poured concrete surface without the practical drawbacks those materials bring into a commercial dining environment. It is a straightforward, functional choice for operators who want a consistent contemporary look across their dining room or terrace without committing to heavy, high-maintenance surfaces.

In day-to-day service, the laminate holds up well against the kind of wear a busy dining room produces — repeated covers, light knocks, and routine cleaning. It resists everyday staining and surface marking under normal conditions, and the material is suitable for both standard indoor use and sheltered outdoor settings such as a covered terrace or courtyard. That flexibility is useful for operators running a mixed indoor-outdoor seating arrangement who want a consistent finish throughout.

From an operational standpoint, the surface is quick to wipe down between covers, which matters where table turnaround is a priority. Key practical points:

• Laminate surface resists everyday staining and light surface scratching
• Suitable for indoor dining rooms and sheltered outdoor areas
• Consistent concrete-effect finish across a mixed seating layout
• Manageable weight at 11.2kg simplifies fitting and repositioning
• Compatible with standard commercial table base fittings

Before ordering, it is worth confirming that your chosen base is rated for this top size and surface area. A stable, appropriately matched base is important for safe use under service conditions. If this footprint does not suit your layout, the top is available in other sizes within the range.

If you would like help matching this top to a suitable base or working out the right size for your space, the team is glad to help you work through it.

This rectangular table top is finished in a marble-effect laminate and sold as a top-only unit, designed to sit on a compatible table base. At 1200x700mm, it provides a workable surface for two to four covers depending on seating layout and chair configuration. It is a practical choice for operators refreshing existing furniture or expanding a dining area without replacing whole table assemblies.

Laminate surfaces of this type are a common choice in cafés, pub dining rooms, hotel breakfast areas, and casual restaurant settings where a clean, consistent appearance is needed without the maintenance demands or cost of real stone. The marble-effect finish gives a presentable front-of-house look while remaining straightforward to keep clean during and between service periods. It handles everyday contact well — food and drink spills, crockery placement, and routine wiping-down are unlikely to cause visible deterioration under normal use. The finish also holds up reasonably against UV exposure, making this top a practical option for conservatory dining or covered terraces, provided it is not left exposed to standing water or open weather over time.

From a practical standpoint, the key points to consider are:

• Hardwearing laminate surface resists stains, scratches, and everyday surface wear
• Marble-effect finish suits both indoor dining and sheltered outdoor settings
• Sold as top only — confirm your base fixing centres before ordering
• At 11.2kg, easy to handle and reposition if your layout changes
• Cleans down quickly with standard commercial cleaning products

Not all table tops and bases share a universal fixing pattern, so it is worth verifying compatibility with your existing or intended base before placing an order. If you are furnishing a larger space, tops in other sizes are available within the range.

If you would like to talk through sizing, finish options, or base compatibility for your space, the team is happy to help before you commit to an order.