Stacking Chairs

The Bolero Elements side chairs are a practical, no-fuss seating option for commercial environments that need flexibility without compromising durability. Made from polypropylene, they are designed to hold up in both indoor and outdoor settings, resisting UV exposure and weathering that would degrade lesser materials over time. Each pack contains four chairs, supplied fully assembled and ready to use straight from the box.

In busy café, restaurant, or event venue settings, these chairs earn their keep through sheer practicality. They stack cleanly when not in use, which makes storage straightforward during quiet periods, between events, or at the end of service. The smooth surface wipes down quickly, which matters when a table needs turning fast or when chairs have been outside in unpredictable weather. Floor-friendly foot bungs help protect both indoor flooring and outdoor surfaces from scuffs during daily repositioning.

From an operational standpoint, a few points are worth noting:

• Fully assembled on arrival — no time lost to setup
• Stackable design reduces storage footprint significantly
• UV and weather-resistant construction suited to covered outdoor terraces and beer gardens
• Smooth polypropylene surface cleans quickly between covers
• Meets BS EN581-1:2017 and BS EN581-2:2015 AC/2016 safety standards for contract use

These chairs are well suited to cafés, casual dining restaurants, event caterers, and hospitality venues that need a reliable, cost-effective seating solution that can move between indoor and outdoor use. They are a practical choice for high-turnover environments where easy cleaning and compact storage are priorities. For venues requiring upholstered or higher-specification seating, alternative options in the range may be worth considering.

If you are furnishing a larger space or need to mix chair styles across zones, feel free to get in touch — we are happy to help you work out quantities and configurations before you commit.

The Bolero Elements side chairs are a straightforward, practical seating option for commercial hospitality environments. Moulded from polypropylene with UV and weather-resistant properties, they are equally suited to covered outdoor terraces, beer gardens, and indoor dining areas. Each chair arrives fully assembled, requiring no preparation before use.

In busy café and restaurant settings, these chairs earn their keep through simplicity. The smooth polypropylene surface wipes clean quickly between covers, which matters during a full service when turnaround time is tight. Floor-friendly foot bungs help protect hard flooring and tiled surfaces from scuffs, reducing wear over time. The stackable design keeps storage practical when the space is cleared for an event or a quiet period.

Key practical advantages include:

• Weather and UV resistance for outdoor use without fading or degradation
• Fully assembled out of the box — no setup time required
• Stackable design reduces storage footprint during quiet periods
• Smooth surfaces clean down quickly between sittings
• Meets BS EN581-1:2017 and BS EN581-2:2015 safety standards for contract use

There are no installation requirements — these chairs are ready to place and use immediately. They are lightweight enough to be repositioned easily by front-of-house staff, which makes them a reasonable choice for flexible or multi-use spaces. They are not upholstered, so comfort over extended dining periods is worth considering depending on the nature of your service.

These chairs are well suited to cafés, casual dining restaurants, event venues, and hospitality spaces that need a reliable, low-maintenance seating option that can move between indoor and outdoor use. For venues requiring a more substantial or upholstered chair, alternatives are available within the range.

If you are unsure whether these suit your layout or service style, the team is happy to help you think it through before you order.

The Bolero Elements side chairs are a practical, no-fuss seating option designed for commercial environments where durability, ease of storage, and weather resistance all matter. Made from polypropylene, they are suited to both indoor and covered or open outdoor use, and the construction is UV-stabilised to resist fading and degradation from prolonged sun exposure. Each pack contains four chairs, supplied fully assembled and ready to use straight from the box.

In day-to-day commercial use, these chairs perform well in environments with high chair turnover — café terraces, restaurant overflow seating, event hire operations, and canteen settings. The smooth surface wipes clean quickly between covers, which matters when turnaround time is short. Floor-friendly foot bungs protect hard flooring and reduce noise when chairs are moved during service.

Practically, the stacking design is one of the more useful features for busy sites. Chairs stack neatly to minimise storage footprint, which is a genuine operational advantage in venues that need to reconfigure seating regularly or bring furniture inside overnight. Key practical points include:

• Stackable design reduces storage space requirements significantly
• UV and weather-resistant construction suitable for outdoor placement
• Smooth polypropylene surface cleans quickly between sittings
• Supplied fully assembled — no setup time required on delivery
• Floor-friendly foot bungs protect hard and soft floor surfaces

These chairs are well suited to cafés, casual dining restaurants, events and hospitality venues, and staff canteens. They are a reliable choice where a cost-effective, weatherproof stacking chair is needed at volume. For venues requiring upholstered seating or more substantial indoor dining chairs, other options in the range may be worth considering.

If you are furnishing a new space or need to match existing Bolero furniture, the team is happy to help confirm suitability before you order.

The Bolero Bistro chair is a straightforward powder-coated steel side chair aimed at commercial hospitality venues. The olive green finish sits within the broader industrial and bistro aesthetic that has become common across cafés, pubs, and casual dining spaces. Sold as a pack of four, the chairs arrive fully assembled and are ready to use immediately.

In day-to-day operation, the steel frame holds up well under the kind of repeated, heavy use that hospitality seating typically faces — constant repositioning, scraping across floors, and exposure to spilled liquids. The powder coating provides reasonable protection against chipping and light corrosion, and the chairs are rated for outdoor use, making them a practical option for covered terraces or beer gardens where conditions are variable.

From an operational standpoint, a few features are worth noting:

• Stackable design reduces storage footprint between services or during deep cleans
• Lightweight construction makes them easy to move without staff effort
• Non-slip rubber feet help keep the chair stable on both hard floors and outdoor surfaces
• Fully assembled out of the box — no setup time required on delivery

There are no special installation requirements. These are freestanding chairs with no fixings, electrical connections, or floor anchoring needed. They are suitable for most hard floor surfaces, though as with any metal chair, the rubber feet should be checked periodically and replaced if worn to avoid floor marking or instability.

These chairs are well suited to casual dining rooms, café front-of-house areas, pub gardens, and similar settings where a consistent bistro or industrial look is the aim. For venues needing upholstered seating, fixed booth arrangements, or higher-specification contract furniture for heavier footfall sites, alternative options in the range may be worth considering.

If you are fitting out a larger space and want to discuss quantities, mix-and-match with other Bolero pieces, or suitability for a specific venue type, the team is happy to help before you place an order.

The Bolero Bistro chair is a straightforward powder-coated steel side chair designed for commercial use in cafés, bars, pubs, and casual dining spaces. The Lilac Pop finish gives it a distinctive character that suits venues going for an informal, contemporary or industrial-influenced look, without the chair becoming the focal point at the expense of practicality.

In day-to-day service, this chair holds up well under the kind of repeated use that hospitality seating has to endure — guests sitting down and standing up throughout service, chairs being shifted between tables, and the occasional rough handling that comes with a busy venue. The powder-coated steel frame resists knocks better than painted wood, and the finish is straightforward to wipe down at the end of a shift. Non-slip rubber feet help keep the chair stable on hard floors, including polished timber and tile, where lightweight chairs can otherwise skid and become a hazard.

From an operational standpoint, a few things stand out:

• Stackable design means chairs store compactly when the space is needed for cleaning or events
• Supplied fully assembled — no setup time required on delivery
• Suitable for covered outdoor use as well as indoor settings
• Sold in a pack of four, which simplifies ordering for most table configurations

It is worth being straightforward about fit: this is a side chair without arms, which suits high-turnover seating arrangements well but may not be appropriate for longer dining occasions or customers who need additional support. The lilac finish is a considered choice — it works well in the right environment but is not a neutral, so it is worth thinking about how it sits alongside your existing interior before ordering in volume.

This chair suits cafés, coffee shops, casual dining venues, and bars that want durable, stackable seating with some visual personality. For operators furnishing a larger space or needing a more neutral palette, it is worth looking at the wider Bolero range before committing.

If you are fitting out a new space or replacing seating across a venue and want to talk through quantities or mix of styles, the team is happy to help you work through what makes sense.

The Victor side chair is a moulded polypropylene stacking chair designed for commercial and semi-commercial settings where durability, ease of storage, and a clean, contemporary appearance all matter. Sold as a pack of two, it is a practical choice for operators furnishing dining areas, canteens, breakout spaces, or outdoor seating zones on a straightforward budget.

In hospitality and catering environments, chairs take considerable daily punishment — dragging, stacking, exposure to spills, and repeated use across multiple sittings. The Victor's polypropylene frame is resistant to the kind of wear that quickly ages cheaper seating, and it has been independently tested to CATAS standards, which are a recognised benchmark for durability and load performance in commercial furniture. That independent certification matters when you're specifying chairs for a busy café, canteen, or function space.

From an operational standpoint, the stackable design is a genuine practical advantage. Chairs that can be efficiently stacked and stored reduce turnaround time when resetting a room, and they take up considerably less floor space during quiet periods or private hire changeovers. Key practical points include:

• Stackable construction for compact storage when not in use
• Suitable for both indoor and covered outdoor settings
• Polypropylene frame is easy to wipe clean between sittings
• CATAS-tested for commercial durability standards
• Neutral taupe finish works across a range of interior schemes

These chairs are well suited to cafés, staff canteens, student accommodation dining rooms, and casual hospitality settings. They are not a heavy-duty banqueting or high-traffic restaurant specification, so operators fitting out a venue with very intensive daily use should consider whether a more robust specification would better serve the long term.

If you're furnishing a larger space or need guidance on quantities, seating layouts, or whether this specification is right for your setting, the team is happy to talk it through.

The Victor side chair is a polypropylene stacking chair designed for commercial hospitality, education, and workspace environments. The moulded one-piece frame construction keeps weight low while providing a stable, comfortable seat suited to settings where chairs are in near-constant use throughout the day.

In practical terms, polypropylene is a sound material choice for front-of-house furniture in busy operations. It resists moisture, is straightforward to wipe down between covers, and holds up well against the daily stacking and unstacking that comes with flexible seating arrangements. The olive green finish is a neutral, contemporary tone that works across a range of interior schemes without appearing overly styled or trend-led.

These chairs suit a number of common commercial scenarios well:

• Cafés and casual dining rooms where seating is rearranged regularly
• Staff canteens and breakout areas requiring durable, easy-clean chairs
• Hospitality venues needing stackable chairs for event or function use
• Educational settings such as common rooms or student dining

The stackable design is a practical consideration for any site where storage space is limited or where chairs need to be cleared quickly between sittings. Stacking reduces floor space requirements significantly when chairs are not in use.

These chairs have been tested to CATAS standards, which provides a reasonable level of assurance that they meet the structural and durability requirements expected in commercial use. That said, operators running very high-volume or outdoor-heavy environments may want to review whether a more heavy-duty specification is appropriate for their particular situation.

If you're equipping a larger site or working through a broader front-of-house fit-out, the team is happy to talk through quantities and suitability before you commit.

The Victor side chair is a moulded polypropylene stacking chair designed for commercial hospitality, education, and workspace environments. Sold here as a pack of two in dark grey, it offers a practical, easy-to-manage seating option for venues that need to move or store chairs regularly between sittings or events.

Constructed from polypropylene with a contemporary moulded profile, the Victor chair is suited to both indoor and outdoor use, making it a practical choice for cafés, restaurant terraces, student common areas, and staff canteens. It has been independently tested to CATAS standards, which assess durability and structural integrity under the demands of commercial use — a useful assurance for operators who need furniture that holds up over time and repeated use.

The stackable design is a practical advantage in any venue where floor space needs to be cleared quickly — between lunch and dinner service, for example, or when a room is being prepared for a different layout. Chairs stack without the need for a dedicated trolley, keeping storage straightforward.

• Suitable for indoor and outdoor settings
• Stackable design for efficient storage between sittings
• CATAS-tested for commercial durability
• Lightweight polypropylene construction
• Available in a two-chair pack

The Victor is a good fit for lower-intensity seating requirements — cafés, breakout spaces, student refectories, or secondary dining areas. For higher-traffic environments where chairs see very heavy daily use, it may be worth considering a more heavy-duty alternative.

If you are furnishing a larger space and want to discuss quantities or suitability for a specific setting, the team is happy to help you think it through.

The Victor side chair is a moulded polypropylene stacking chair sold in pairs. It is a straightforward, commercially tested seating option designed for hospitality venues, breakout spaces, and similar settings where practicality and ease of management matter as much as appearance.

In commercial use, polypropylene chairs of this type are a common choice where seating needs to be moved, reconfigured, or stored regularly — between services, during events, or when a space serves more than one function across the day. The Victor has been CATAS tested, which means it has been independently assessed against recognised commercial durability standards rather than relying on manufacturer claims alone.

Practical advantages for operators include:

• Stackable design makes storage straightforward and reduces floor space when not in use
• Polypropylene construction is wipe-clean and resistant to everyday wear
• Suitable for both indoor and covered outdoor settings
• Lightweight enough to be repositioned by one person
• Sold in pairs, making it easy to scale quantities to room size

As with any seating purchase for a commercial environment, it is worth considering the overall volume required, the nature of use — high turnover café service will place different demands on chairs than a staff breakout room — and whether the style sits well with the rest of the scheme. For higher-traffic or more intensive environments, heavier-duty options may be worth considering.

If you are furnishing a new space or replacing existing seating across a site and want to talk through the right choice, the team is happy to help.

The Tavo stacking side chair is a straightforward, practical seating option commonly used in cafés, casual dining rooms, and hospitality venues. The seat and back pad are finished in a ribbed faux leather in a vintage teal colourway, paired with a tubular metal frame. The result is a chair that holds up to regular daily use without demanding much attention from operators. This listing covers a pack of two chairs.

In a front-of-house environment, durability and easy storage matter as much as appearance. The Tavo is designed to stack — typically six to eight chairs high depending on your ceiling clearance and the stability of the stack — which makes it practical for venues that reconfigure their space between sittings or store chairs off the floor during quiet periods.

From an operational standpoint, the key advantages are:

• Stackable design reduces floor space needed during storage or venue reset
• Faux leather upholstery wipes down quickly between covers
• Tubular metal frame resists the knocks and scrapes of daily service
• Available in a range of colours to suit different interior schemes
• Coordinates with matching bar stools from the same range

There are no significant installation requirements — these are free-standing chairs that need no fixing or assembly beyond unpacking. Bear in mind that faux leather upholstery, while practical to clean, is not as hardwearing as genuine leather under very high turnover conditions. For venues with extremely heavy daily use, it is worth considering whether a more heavy-duty specification would serve better over time.

The Tavo suits cafés, small restaurants, hotel breakfast rooms, and similar hospitality settings where a clean, consistent look is needed without a large per-chair budget. If you are furnishing a larger space or need guidance on quantities and layout, our team is happy to talk it through before you commit to an order.

The Tavo is a stackable side chair with a tubular metal frame and faux-leather seat and back pad in a vintage tan finish. The upholstery features a ribbed pattern that adds some visual texture without being overly decorative. It sits comfortably within the industrial-casual aesthetic that is common across cafés, casual dining rooms, and informal hospitality spaces. This listing covers a pack of two chairs.

In a front-of-house setting, the practical value of a stacking chair comes down to a few things: how well it holds up under daily use, how easy it is to store during quiet periods, and whether it still looks presentable after a year of regular service. The Tavo's metal frame is built to take everyday commercial use, and the chairs can be stacked to a reasonable height when space needs to be cleared — useful in spaces that double as event or function areas.

• Faux-leather upholstery is easier to wipe down than fabric, which suits food-service environments
• Ribbed seat and back pad adds comfort for seated dining rather than just quick-turnaround use
• Stackable design supports efficient storage when the room is reconfigured
• Available as part of a matching range including bar stools
• Six colour options available across the Tavo range

These chairs are well suited to cafés, bistros, casual restaurants, and staff dining areas. They are not heavy-duty banqueting chairs, so very high-volume operations with frequent stacking and unstacking throughout the day may want to consider a more robust option. For spaces where the chairs remain set out for most of the service period, the Tavo is a practical and presentable choice.

If you are furnishing a larger space or want guidance on quantities and colour options, the team is happy to help you work through it.

The Tavo stacking side chair is a straightforward, practical seating option designed for commercial and hospitality environments where appearance, comfort, and flexible storage all need to be considered. The seat and back are upholstered in a ribbed faux leather in a vintage red finish, which holds up reasonably well under everyday front-of-house use and wipes down easily between covers. The tubular metal frame is sturdy and gives the chair a clean, industrial aesthetic that sits comfortably in cafés, casual dining rooms, and breakout or office spaces.

In a hospitality setting, stackability matters as much as the chair itself. The Tavo stacks efficiently, which makes turnaround between events or end-of-service tidying straightforward without requiring significant storage space. Sold here as a pack of two, it is a practical entry point for operators furnishing a small area or supplementing existing seating.

• Ribbed faux leather upholstery wipes down quickly between sittings
• Tubular metal frame provides a stable, durable structure for regular use
• Stackable design reduces the floor space needed during storage
• Vintage red finish suits informal dining, café, and hospitality interiors
• Available in six colours and coordinates with the matching bar stool range

The chair is best suited to lower-intensity front-of-house environments — cafés, small restaurants, event spaces, and office dining areas — rather than high-turnover casual dining operations where seating takes significant daily punishment. If you are furnishing a larger space or need to consider weight ratings, volume pricing, or colour coordination across multiple furniture pieces, it is worth having a conversation before ordering in quantity.

If you have questions about quantities, colour options, or whether this chair suits a particular setting, the team is happy to help.

The Tavo stacking side chair is a straightforward, well-proportioned side chair aimed at cafés, restaurants, and casual dining spaces. The seat and backrest are upholstered in a ribbed vintage faux leather in dark grey, and the frame is constructed from tubular metal. Chairs are sold here as a pack of two.

In a front-of-house environment, chairs take considerable punishment — being dragged across floors, knocked by passing staff, and stacked and unstacked multiple times a day. The Tavo's tubular metal frame holds up reasonably well to that kind of routine use, and the faux leather upholstery wipes down easily between covers, which is a practical consideration in any food service setting. The ribbed pattern adds a degree of visual texture without being distracting.

From an operational standpoint, the key practical points are:

• Stackable design allows compact storage when space is cleared for events or deep cleaning
• Faux leather surface wipes clean quickly between sittings
• Available in a range of colours to suit different interior schemes
• Coordinates with matching bar stools from the same range
• Sold in pairs, which suits phased purchasing or topping up existing stock

There are no fixed installation requirements — these are freestanding chairs with no electrical, gas, or plumbing considerations. It is worth checking floor surfaces before ordering in volume, as tubular metal frames on hard flooring can cause noise and surface wear without protective feet. Stacking height should be assessed against your storage ceiling height and surface stability.

The Tavo suits cafés, bistros, and casual dining rooms looking for a consistent, easy-care seating solution with a contemporary industrial aesthetic. It is a mid-range chair appropriate for moderate footfall environments rather than very high-turnover operations where a heavier-duty commercial specification might be more appropriate.

If you are fitting out a larger space or want to discuss colour options and quantities, we are happy to talk it through before you order.

The Tavo is a stacking side chair with a ribbed vintage faux leather seat and back pad, set on a tubular metal frame. It is sold here as a pack of two and is available in six colours, with a matching range of bar stools if a coordinated look is required.

In practical front-of-house use, the Tavo holds up well under the daily demands of a café or restaurant environment. The metal frame is robust enough to handle regular movement and the kind of wear that comes with busy covers, while the faux leather upholstery wipes down quickly between sittings — a straightforward consideration in any food service setting.

• Stacks for compact storage when covers are reduced or the room is cleared
• Faux leather upholstery is easy to wipe down after service
• Tubular frame construction resists racking under repeated daily use
• Co-ordinates with the matching Tavo bar stool range
• Available in six colours to suit different interior schemes

These chairs stack to a reasonable height for storage, which is useful where floor space is limited between services. They are suitable for fixed dining rooms, café floors, and flexible event or function spaces where seating needs to be moved and stored regularly. They are not intended for outdoor or wet-environment use.

The Tavo suits independent cafés, casual dining operations, and hospitality venues that need a practical, presentable chair at a sensible price point. If you are furnishing a high-turnover operation or need advice on quantities and configuration, the team is happy to talk it through.

The Tavo stacking side chair is a straightforward, practical seating option suited to cafés, casual dining rooms, and hospitality spaces where a consistent, presentable look is needed without excessive outlay. The seat and back are upholstered in a ribbed vintage-effect faux leather, and the frame is constructed from tubular metal, giving the chair a solid, stable feel underfoot. This pack contains two chairs.

In a commercial setting, stackable seating earns its keep. The Tavo can be stacked in multiples for storage at the end of service, which matters in venues where floor space is cleared daily or where chairs need to be moved quickly between covers. The faux leather upholstery wipes down easily, which is a practical consideration in any food and beverage environment where seating sees regular contact.

• Ribbed vintage faux leather upholstery on seat and back
• Tubular metal frame construction for day-to-day durability
• Stackable design supports compact end-of-service storage
• Available in a range of colours to suit different interior schemes
• Pairs with matching Tavo bar stools for a consistent look throughout

These chairs are well suited to independent cafés, casual dining rooms, and hospitality venues looking for a coordinated seating solution that is easy to maintain and move around. They are not designed for heavy outdoor use or high-turnover environments where contract-grade seating with extended warranties may be more appropriate.

If you are furnishing a larger space and want to discuss quantities, colour options, or whether the Tavo range is the right fit for your venue, we are happy to help before you commit to an order.

The Cross Side Chair is a straightforward polypropylene stacking chair designed for commercial hospitality and workspace settings. Sold here as a pack of two, it is available in a neutral taupe finish that works across a range of interior schemes. The frame is softly moulded to give a contemporary profile while maintaining the structural integrity expected in a commercial environment.

In practical terms, this chair is well suited to cafés, staff canteens, student accommodation dining rooms, and similar settings where chairs need to be durable, easy to handle, and simple to store. The polypropylene construction resists moisture and wipes down quickly, which matters in any catering environment where spills are routine. It is rated for both indoor and outdoor use, making it a reasonable choice for covered terraces or courtyard seating as well as internal dining areas.

• CATAS-tested to contract quality standards for verified commercial durability
• Stackable up to four chairs high, reducing storage footprint during off-peak periods
• Polypropylene frame resists moisture and cleans down quickly
• Suitable for indoor and outdoor use in covered commercial settings
• Neutral taupe finish complements a range of dining and workspace interiors

There are no complex installation requirements — these chairs arrive ready to use. If you are furnishing a larger dining room or need higher chair counts, it is worth considering whether a bulk pack or a heavier-duty frame specification would be more appropriate for your service volume and usage pattern.

If you are fitting out a new space or replacing existing seating across multiple areas, the team is happy to talk through what will work best for your layout and footfall before you commit to a quantity.

The Cross side chair is a polypropylene stacking chair designed for commercial and contract use in hospitality, café, and workspace settings. Available here in olive green, the chairs are sold as a 2-pack and are suitable for both indoor and outdoor environments.

In a busy hospitality setting, a chair needs to hold up to repeated daily use, frequent moving, and exposure to spills and cleaning products. The Cross chair is constructed from a moulded polypropylene frame, which resists moisture and is straightforward to wipe down at the end of service. The softly contoured seat and supportive backrest make it comfortable enough for extended covers without requiring upholstered seating.

From an operational standpoint, the stackable design is one of its more practical features. Chairs that stack cleanly reduce floor space requirements during set-up, breakdown, and storage — a genuine advantage in venues where space is shared or reconfigured regularly. Key practical points include:

• Stacks up to four chairs high, reducing storage footprint
• Polypropylene frame wipes clean quickly after service
• Suitable for outdoor terrace use as well as indoor dining
• CATAS tested to contract quality standards
• Consistent olive green finish works across a range of interior schemes

These chairs are well suited to cafés, casual dining restaurants, hotel breakout areas, and student or workspace environments where durability and easy handling matter more than premium upholstery. They are a practical mid-range option. Venues requiring heavier-duty or fully upholstered contract seating may want to consider alternatives from the wider range.

If you are fitting out a larger space and want to talk through quantities, mix of chair styles, or suitability for a specific environment, the team is happy to help.

The Cross side chair is a polypropylene stacking chair finished in dark grey, sold here as a pack of two. It is a straightforward, practical seating option designed for commercial environments where chairs need to cope with continuous daily use, be easy to store, and maintain a presentable appearance over time.

The moulded polypropylene construction gives the chair a consistent, contemporary profile that suits a range of settings — café dining areas, canteens, breakout spaces, and hospitality venues. The backrest provides reasonable support for seated diners without adding unnecessary bulk, and the overall form is neutral enough to work alongside most table and interior styles.

For operators who need to clear and reconfigure a space quickly, the stackability is a genuine practical advantage. Chairs stack up to four high, which keeps storage requirements manageable even when floor space is limited. The CATAS contract-quality testing is worth noting — it means the chair has been independently assessed against recognised commercial durability standards rather than simply described as commercial-grade.

• Suitable for both indoor and outdoor use
• Stackable up to four chairs high for efficient storage
• CATAS tested to contract quality standards
• Polypropylene frame resists moisture and is straightforward to wipe clean
• Neutral dark grey finish suits a range of hospitality and workspace interiors

These chairs are well suited to operators furnishing café areas, canteens, student accommodation dining spaces, or flexible meeting and breakout areas. If you are equipping a higher-volume venue or require seating rated for more intensive use, it is worth discussing your specific requirements with us before ordering.

If you would like to talk through quantities, suitability for your space, or how these chairs fit alongside other furniture options, feel free to get in touch with the team.

The Cross side chair is a straightforward, contract-grade polypropylene chair sold here as a pair. It is designed for commercial hospitality environments where durability, stackability, and ease of maintenance matter more than elaborate styling. The moulded polypropylene construction gives it a clean, contemporary profile in a neutral black finish that sits comfortably alongside most interior schemes.

In practice, these chairs hold up well in settings that put furniture through consistent daily use — cafés, canteens, hotel breakfasting areas, student refectories, and function spaces. The polypropylene frame resists knocks, moisture, and the general wear that comes with high footfall. Because they stack up to four high, clearing a floor for cleaning or reconfiguring a room for different covers is straightforward, which matters in venues where the same space handles multiple sittings or events.

A few practical points worth noting:

• CATAS tested to contract quality — independently verified for commercial durability
• Stackable to four chairs high, reducing storage footprint between sittings
• Suitable for both indoor and outdoor use
• Polypropylene construction wipes clean easily with minimal effort
• Sold as a 2 pack — useful for topping up existing sets or furnishing smaller spaces

These chairs suit operators who need a dependable, low-maintenance seating option at a sensible price point. They are a practical choice for venues furnishing larger numbers of covers on a budget, or as supplementary seating for overflow and outdoor areas. For venues requiring heavier-duty contract seating with upholstered options or metal-framed construction, alternatives at a higher specification are available in the range.

If you are furnishing a larger space or mixing chair styles across a venue, feel free to get in touch — we are happy to talk through quantities and suitability before you order.

The Bolero Bespoke Bia B is a contract-grade stacking chair built for hospitality and food service environments. It combines a solid beechwood frame with faux leather seat and back upholstery in an anthracite and charcoal colour block finish. The chair is part of Bolero's Bespoke range, which is produced to order with a choice of fabric and stain finishes to suit specific venue requirements.

In practice, this chair is suited to restaurants, hotel dining rooms, function suites, and similar settings where chairs cycle through heavy daily use. The hardwood frame provides the structural rigidity expected of contract furniture, and the faux leather upholstery wipes down easily between covers — a practical consideration in any food service environment. The stacking capability helps with storage and room reconfiguration, which matters in venues that need to flex their layout between services or events.

• Solid beechwood frame rated for contract-grade commercial use
• Faux leather upholstery that wipes clean with minimal effort
• CRIB5 fire-retardant upholstery meeting contract compliance requirements
• Stackable design supports efficient storage and layout changes
• Available in multiple fabric and stain finishes as part of the Bespoke range

Because this chair is built to order, lead times will be longer than stock items and the order cannot be cancelled or returned once placed. It is worth confirming your finish selection carefully before ordering, and factoring the lead time into any opening or refurbishment programme.

The Bia B suits operators who want a presentable, practical dining chair that meets fire safety requirements without a high-maintenance upholstery. It works well in mid-volume restaurant or hotel dining settings. Venues needing a purely utilitarian or heavy-rotation banqueting chair may find a simpler polypropylene or metal-frame option more appropriate for their throughput.

If you are fitting out a dining space and want to talk through finish options or lead times before committing, we are happy to help.

The Bolero Bespoke Bia B is a contract-grade stacking chair built for commercial hospitality environments. It combines a solid beechwood frame with faux leather seat and back upholstery, finished in an anthracite and wenge colour combination that works well across a range of dining and lounge settings. This chair is part of Bolero's Bespoke range, which is produced to order in a variety of fabric and stain finishes to suit specific venue interiors.

In practical commercial use, the hardwood frame provides the structural integrity needed for heavy daily rotation — repeated seating across multiple sittings, stacking between services, and the general handling that comes with busy front-of-house operations. The faux leather upholstery is straightforward to wipe down between covers, which matters in venues turning tables quickly. The stacking capability helps with storage in tighter back-of-house spaces and makes floor cleaning easier during close-down.

Key practical points worth noting:

• CRIB5 fire-retardant upholstery meets contract-grade compliance requirements
• Faux leather surface wipes clean easily and resists moisture better than fabric in food environments
• Stacking design supports compact storage during off-peak hours
• Hardwood frame construction suited to the stresses of commercial daily use
• Anthracite and wenge finish suits both contemporary and more traditional dining interiors

Because this chair is built to order, lead times will be longer than for stock items, and it is worth confirming your quantity requirements before placing an order. As a bespoke product, it is non-returnable and non-refundable once the order is confirmed, so it is important to be certain of the finish and quantity before proceeding.

This chair is well suited to restaurants, hotels, bars, and event spaces that need a reliable contract chair with a clean, considered aesthetic. It is a practical mid-range option for venues wanting a more tailored look without commissioning fully custom furniture. For venues requiring a different finish or upholstery specification, other options within the Bespoke range may be worth considering.

If you are unsure about lead times, quantities, or which finish best suits your space, the team is happy to talk it through before you commit to an order.

The Bolero Bespoke Bia B is a contract-grade stacking chair combining a solid beechwood frame with faux leather seat and back upholstery in an anthracite and walnut colour combination. It sits within Bolero's Bespoke range, which is produced to order in a choice of fabric and stain finishes — useful for operators who need seating to align with a specific interior scheme rather than working around off-the-shelf options.

In a hospitality setting, chairs take sustained punishment: repeated stacking, scraping across floors, heavy daily use across multiple seatings, and periodic deep cleans. The Bia B's hardwood frame is selected for structural reliability under these conditions, and the faux leather upholstery is practical for front-of-house environments where spills are routine and fast turnaround between covers is expected.

• CRIB5 fire-retardant upholstery meets contract-grade compliance requirements
• Faux leather seat and back wipe down quickly between covers
• Stackable design supports efficient storage during closed periods
• Hardwood frame built to withstand repeated daily use in busy venues
• Available across multiple fabric and stain finishes to suit your interior

Because this chair is built to order, lead times will be longer than stocked items and the order cannot be cancelled or returned once placed. It is worth confirming your finish selection carefully before ordering, particularly if matching existing furniture. The chair is well suited to restaurants, hotels, cafés, and function spaces where a classic upholstered look is needed alongside practical contract durability.

If you are furnishing a larger space or need guidance on quantities, finishes, or mixing chair styles, the team is happy to talk through what works best for your venue before you commit to an order.

The Bolero Bespoke Bia B is a contract-grade stacking chair combining a solid beechwood frame with faux leather seat and back upholstery in an anthracite and oak colour finish. It is part of Bolero's Bespoke range, which is built to order and available in a range of fabric and stain combinations to suit different venue aesthetics.

In commercial settings, durability and ease of maintenance tend to matter more than appearance alone. The beechwood frame is structurally suited to the repeated daily use typical of busy restaurants, hotels, and function venues — where chairs are moved, stacked, and turned around between covers regularly. The faux leather upholstery wipes down quickly between sittings, which is a practical advantage in food and beverage environments where spills are routine.

Key practical features worth noting for operators:

• CRIB5 fire-retardant upholstery, meeting contract-grade compliance requirements
• Stackable design to support efficient storage and room layout changes
• Faux leather finish is straightforward to clean and resistant to everyday wear
• Solid hardwood frame constructed for repeated commercial use
• Available in multiple fabric and stain combinations to suit venue branding

Because this chair is built to order, lead times will be longer than for stock items, and orders cannot be cancelled or returned once placed. It is worth confirming your finish requirements carefully before ordering, particularly if you are specifying across a large number of covers.

The Bia B suits front-of-house environments where a clean, contemporary aesthetic is needed alongside reliable contract-grade construction — including restaurants, hotel dining rooms, and private event spaces. For venues requiring a simpler, fully stackable option at lower cost, lighter-duty alternatives may be worth considering.

If you are specifying seating across a full venue or want to discuss finish options before committing to a built-to-order quantity, the team is happy to talk it through.

The Bolero Bespoke Bia B is a contract-grade stacking chair combining a solid beechwood frame with faux leather upholstery in an anthracite and beech finish. It is part of Bolero's made-to-order Bespoke range, which offers a broader choice of fabric and stain combinations for operators who need seating that fits a specific interior scheme.

In hospitality and foodservice settings, seating takes considerable daily punishment — chairs are dragged, stacked, knocked, and cleaned repeatedly. The Bia B is built with that reality in mind. The hardwood frame is selected for structural integrity under contract use, and the faux leather upholstery is straightforward to wipe down between covers without absorbing spills or odours over time.

Practical points worth noting for busy front-of-house environments:

• Faux leather upholstery meets CRIB5 fire-retardancy standards, as required in most UK commercial premises
• Stacking capability reduces storage footprint during closed periods or room reconfigurations
• The colour block anthracite and beech finish suits both contemporary and more traditional dining room styles
• The Bespoke range allows finish selection to match existing furniture or a wider refurbishment scheme

Because this chair is built to order, lead times will be longer than stock items, and orders cannot be cancelled or returned once placed. That makes it worth taking time upfront to confirm quantities, finish choices, and whether the style sits consistently with other furniture in the space. If you are specifying seating across multiple dining areas or want to mix this model with others from the Bespoke range, it is sensible to review everything together before committing.

The Bia B suits restaurants, hotel dining rooms, function suites, and similar hospitality environments where appearance and durability both matter. For venues needing a lighter occasional chair or a heavier-duty option for very high-turnover covers, there are alternative models in the range worth considering.

If you are specifying seating for a refurbishment or new opening and want to talk through finish options or quantities, the team is happy to help before you place an order.

The Bolero Bespoke Bia B is a contract-grade stacking chair built for hospitality environments where seating takes daily punishment. It combines a solid beechwood frame with faux leather upholstery across the seat and back, finished here in a blue and charcoal colour block. As part of the Bespoke range, it is built to order, with fabric and stain options available to match your venue's scheme.

In a busy restaurant, hotel dining room or event space, chairs are moved, stacked, dragged and sat on repeatedly throughout the day. The Bia B's hardwood frame is selected for structural integrity under contract conditions, and the faux leather upholstery is practical to wipe down between covers — an important consideration in any food and beverage setting. The CRIB5 fire-retardancy rating meets the standard required for contract use in the UK, so it is suitable for licensed and public premises without additional treatment.

Key practical points for operators:

• Stackable design reduces storage footprint when the room is reconfigured or cleared
• Faux leather upholstery wipes clean quickly between sittings
• CRIB5 fire-retardant rating meets UK contract furniture requirements
• Beechwood frame provides structural reliability under frequent daily use
• Colour block finish suits both classic and contemporary interior schemes

Because this chair is built to order, lead times will be longer than a stocked item. It is also non-returnable once the order is placed, so it is worth confirming your colour selection and quantity carefully before committing. For larger projects or mixed seating layouts, it is worth discussing your requirements before ordering to ensure the finish works cohesively across the space.

The Bia B is well suited to independent restaurants, boutique hotels, private dining rooms and event venues looking for a practical, presentable chair that holds up over time. For very high-turnover venues or outdoor-adjacent spaces, it is worth considering whether a different construction or finish would better suit the conditions.

If you are fitting out a larger space or are unsure which finish or quantity is right for your venue, the team is happy to talk it through before you place an order.

The Bolero Bespoke Bia B is a contract-grade stacking chair combining a solid beechwood frame with faux leather seat and back upholstery. It is offered in a blue and wenge colour combination, making it a practical choice for hospitality operators who want a considered, consistent look across their dining space without commissioning bespoke joinery.

In a busy front-of-house environment, chairs take a great deal of punishment — daily stacking and unstacking, constant repositioning, and sustained use across long service periods. The beechwood frame is well suited to this kind of repeated handling, and the faux leather upholstery resists surface soiling in the way that fabric-covered chairs generally cannot, which helps maintain presentation standards through a full day's trading.

From an operational standpoint, the key practical advantages are:

• Faux leather wipes down quickly between covers, reducing front-of-house cleaning time
• CRIB5 fire-retardant upholstery meets contract-grade requirements for licensed and public venues
• Stackable design supports efficient storage during closed periods or private hire setup
• Consistent colourway allows straightforward ordering to match or extend an existing scheme
• Contract-grade construction is rated for the frequency of use typical in restaurant and hotel environments

This chair is built to order, which means lead times will be longer than for stock items. It is also non-returnable once an order is placed, so it is important to confirm the colourway, quantity, and suitability for your space before ordering. If you are furnishing a larger area or need to mix chair styles, it is worth considering whether a consistent frame finish across the room will work with your existing flooring and fixed furniture.

The Bia B suits restaurants, hotel dining rooms, private members clubs, and similar hospitality venues where a mid-range contract chair with upholstered seating is appropriate. For very high-turnover casual dining operations, a fully polypropylene or metal-framed alternative may offer a more resilient long-term solution. For more formal or boutique settings, the wood and faux leather combination tends to sit well.

If you are fitting out a full dining room or are unsure whether this chair works with your scheme, we are happy to talk it through before you commit to an order.

The Bolero Bespoke Bia B is a contract-grade stacking chair with a solid beechwood frame and faux leather seat and back in a two-tone blue and walnut finish. It is built to order as part of Bolero's Bespoke range, which offers a choice of fabric and stain combinations to suit different interior schemes. This is not an off-the-shelf chair — each unit is made specifically to the customer's specification, so lead times and ordering requirements differ from standard stock items.

In a hospitality setting, a dining chair needs to hold up to repeated daily use, frequent repositioning, and the occasional knock. The Bia B's hardwood frame is selected for structural strength as well as appearance, and the faux leather upholstery is straightforward to wipe down between covers — a practical consideration in any food service environment. The chair stacks, which helps with storage during quiet periods or room reconfigurations.

• Solid beechwood frame constructed to contract-grade standards
• Faux leather seat and back — easy to clean and stain-resistant
• CRIB5 fire-retardant upholstery, meeting contract hospitality requirements
• Stackable design for compact storage when not in use
• Available across a range of fabric and stain finish combinations

Because this chair is built to order, it is non-returnable once the order has been placed. It is worth confirming the finish, quantity, and delivery schedule before committing, particularly for larger dining room fitouts where lead time could affect an opening date. The chair is well suited to restaurants, hotels, cafés, and event spaces that want a consistent, considered look without commissioning fully bespoke joinery.

If you are fitting out a larger space or need guidance on quantities, finishes, or how this chair sits alongside other pieces in the Bespoke range, the team is happy to talk it through before you place an order.

The Bolero Bespoke Bia B is a contract-grade stacking chair combining a solid beechwood frame with faux leather upholstery in a blue and oak colour finish. It is built to order as part of Bolero's Bespoke range, which offers a selection of fabric and stain combinations to suit different interior schemes.

In hospitality and foodservice environments, chairs take considerable punishment — dragged across hard floors, stacked repeatedly at the end of service, and subjected to food and drink spills throughout the day. The Bia B is constructed to withstand that kind of regular use. The hardwood frame provides the structural rigidity needed for contract settings, and the faux leather upholstery wipes down easily between covers, which matters in a busy dining room where turnaround time is tight.

Key practical points for operators:

• CRIB5 fire-retardant upholstery meets contract-grade compliance requirements for licensed and hospitality premises
• Faux leather finish is straightforward to clean and does not absorb spills in the way that fabric does
• Stacking design reduces floor space required during non-service periods
• Solid wood frame provides stability and resists the racking forces that come with repeated stacking
• Available in a range of finishes if the blue/oak combination does not match your interior scheme

Because this chair is built to order, lead times will be longer than for stock items and the order cannot be cancelled or returned once placed. It is worth confirming quantities carefully before ordering, and considering whether your space and cover count call for a lighter occasional chair or a heavier-duty alternative better suited to very high-volume operations.

The Bia B suits restaurants, hotel dining rooms, bars, and function spaces where a consistent, presentable chair is needed across a number of covers. If you are fitting out a larger venue or need guidance on quantities and finish options, the team is happy to talk through the options before you commit.

The Bolero Bespoke Bia B is a contract-grade stacking chair built for hospitality and commercial dining environments. It combines a solid beechwood frame with faux leather upholstery across the seat and back, finished in a blue and beech colour combination. As part of the Bespoke range, it is produced to order, meaning the finish you receive is specified at the point of purchase rather than selected from pre-built stock.

In a busy restaurant, hotel dining room, or event space, chairs take considerable punishment — repeated stacking, scraping across floors, and the daily wear of continuous front-of-house use. The hardwood frame on the Bia B is selected for structural integrity under contract conditions, and the faux leather upholstery is chosen partly for its practicality: it wipes clean quickly between covers and resists the kind of surface degradation that fabric upholstery can suffer in high-traffic settings.

Key practical points worth noting:

• CRIB5 fire-retardant upholstery, meeting contract-grade compliance requirements
• Faux leather finish cleans down easily and resists moisture
• Stackable design supports efficient storage between service periods
• Solid hardwood frame suited to frequent daily use
• Built to order — allows finish specification to match your interior scheme

Because this chair is built to order, lead times will be longer than for off-the-shelf seating, and it is non-returnable once the order is placed. It is worth confirming your colour and finish requirements carefully before ordering, and considering how the chair sits alongside your existing furniture or planned scheme.

The Bia B is well suited to restaurants, hotel dining rooms, wine bars, and similar hospitality settings where a timber and upholstered aesthetic is appropriate. For venues requiring a more compact profile, or those fitting out larger banqueting spaces where a lighter or purely polypropylene chair may be more practical, alternative options within the range may be worth exploring.

If you are fitting out a venue and want to talk through seating quantities, lead times, or finish compatibility, the team is happy to help before you commit.

The Bolero Bespoke Bia B is a contract-grade stacking chair built to order in a red and charcoal colour combination. It pairs a solid beechwood frame with faux leather upholstery on the seat and back, giving it a clean, two-tone appearance that sits comfortably within a range of hospitality and dining interior styles.

In a commercial setting, the demands placed on seating are significant. Chairs are moved, stacked, and used repeatedly through each service. The hardwood frame is selected for structural integrity under these conditions, and the faux leather upholstery is practical to wipe clean between covers — an important consideration in any food and beverage environment. The material meets CRIB5 fire-retardancy standards, which is a requirement for contract use in the UK across hotels, restaurants, and licensed premises.

Key practical points worth noting before ordering:

• CRIB5 fire-retardant upholstery meets UK contract requirements
• Faux leather is easy to wipe down and maintain in service
• Stacking capability helps with storage during closed periods
• Solid beechwood frame provides structural durability under daily use
• Built to order in this specific red and charcoal finish

Because this chair is built to order, lead times will be longer than stock items and the order cannot be cancelled or returned once placed. It is worth confirming the finish, quantity, and delivery window carefully before committing, particularly for large covers or phased fit-outs where timing matters.

This chair is well suited to restaurants, hotel dining rooms, bars, and event spaces looking for contract-grade seating with a defined colour scheme. If you are furnishing a high-turnover casual dining operation and need something more robust or a different configuration, it is worth discussing your volume and usage pattern before placing a built-to-order quantity.

If you have questions about suitability, lead times, or how this chair fits within a broader furniture scheme, our team is happy to talk it through before you commit.