Double Door Lockers

This is a freestanding double door staff locker from Elite Lockers, finished in green powder coated steel with a sloping top and secured by an electronic combination lock mechanism. It is designed for staff changing areas, back-of-house corridors, and other workplace environments where personal belongings need to be stored securely without the ongoing cost or complication of key management.

The welded steel construction and reinforced doors give these lockers the robustness expected in busy working environments. The anti-bacterial powder coating is formulated to inhibit the spread of bacteria including MRSA and E. coli, which makes these units particularly well suited to food production sites, hospital catering operations, and any setting where hygiene standards are closely governed. The sloping top prevents items accumulating on the unit and is a practical feature in environments where cleanliness audits are routine.

From an operational standpoint, the electronic combination lock removes the need to manage and replace physical keys — a meaningful saving in sites with high staff turnover or shift-based rotas. Each user can set their own code, and there are no moving lock components to wear out in the way a keyed cylinder might over time.

• Anti-bacterial coating inhibits MRSA and E. coli surface spread
• Sloping top discourages storage of items on top of the unit
• Electronic combination lock eliminates key management overhead
• Can be wall-fixed or nested in banks to suit available space
• Welded plinth between compartments adds structural rigidity

These lockers are best suited to single or small groups of staff positions. For larger changing facilities or sites requiring a significant bank of lockers, a heavier-duty or higher-capacity configuration may be worth considering. The powder coated finish is available in this green colourway, which can assist with colour-coded zoning in larger facilities.

If you are specifying lockers for a new build or refurbishment and are unsure about quantities, layouts, or fixings, our team is happy to talk through the requirements before you place an order.

This Elite double door locker is a steel-built, freestanding storage unit finished in green powder coated steel. Each unit houses two separate compartments, each secured by an electronic combination lock mechanism — removing the need for keys or padlocks and simplifying access management in busy staff areas.

In commercial environments where staff turnover is high or shared facilities are in regular use, the electronic combination lock offers a practical advantage: codes can be changed between users without the cost or inconvenience of replacing physical locks. The construction uses toughened steel throughout, with reinforced doors and a welded plinth between compartments to maintain structural integrity under daily use.

The powder coating carries an anti-bacterial treatment designed to inhibit the spread of pathogens including MRSA and E. coli — a relevant consideration for food production, healthcare catering, and other hygiene-critical environments where staff locker areas are subject to infection control standards.

• Electronic combination lock removes reliance on keys or padlocks
• Anti-bacterial powder coat finish suited to hygiene-critical environments
• Toughened steel construction with reinforced doors for durability
• Can be wall-fixed or nested together to make efficient use of space
• Welded plinth between compartments adds rigidity and structural security

Installation is straightforward — units can be secured directly to a wall or grouped together in banks where floor space is limited. There are no electrical supply requirements for the locker body itself; the electronic lock is self-contained. Ensure the floor is level before positioning, particularly when nesting multiple units.

This locker is well suited to catering operations, food production facilities, healthcare kitchens, and similar environments where hygiene compliance and secure staff storage are both priorities. For sites requiring a larger number of compartments or different door configurations, alternative layouts are available within the Elite range.

If you are specifying lockers across a larger site or need advice on layout and quantities, our team is happy to talk it through before you place an order.

This is a double door steel locker from Elite Lockers, finished in green epoxy polyester powder coat and fitted with a camlock mechanism. The sloping top discourages items being stored on top of the unit, which helps maintain a tidier changing area and reduces the accumulation of dust and clutter. A welded plinth sits between the two doors, adding a practical layer of inter-compartment security that is useful wherever staff share a locker bay.

The powder coat finish is applied to a tough steel body, giving reasonable resilience in the kind of environment you'd expect in a staff changing area or back-of-house corridor. The green colour option makes it straightforward to colour-code locker banks by department or shift group, which some operators find useful for larger teams.

Practical points worth noting before ordering:

• Camlock fitting included; padlock not supplied with this variant
• Double door configuration includes double coat hooks per compartment
• Sloping top design discourages stacking, keeping the area safer and tidier
• Welded plinth between doors strengthens inter-compartment security
• Epoxy polyester powder coat resists light knocks and general wear

At just over 23kg, the unit is manageable to position but will typically require two people to handle safely during installation. It is wall-anchorable for stability, and the depth of 450mm means it occupies a reasonable footprint — worth accounting for in tighter changing rooms or corridors. This locker is suited to most standard staff facilities in hospitality, catering, and food production environments.

If you are fitting out a larger team space and need to think through layout, capacity per employee, or colour-coding across a bank of units, the team is happy to talk through the options before you commit to an order.

This is a double-door coin return locker from Elite Lockers, finished in graphite green powder-coated steel and fitted with a sloping top. It is designed for use in staff changing areas and back-of-house environments where durability, hygiene, and security are all practical requirements rather than optional extras.

The powder coating applied to these lockers carries anti-bacterial properties that help suppress the spread of pathogens including MRSA and E. coli. In food production, healthcare catering, and large-scale hospitality environments where cross-contamination risk is taken seriously, this is a meaningful feature rather than a marketing point. The steel construction is toughened throughout, with reinforced doors and a welded plinth between compartments to add structural rigidity and prevent unauthorised access from below.

From a day-to-day facilities management perspective, the sloping top serves a straightforward purpose: it prevents items being left on top of the unit and makes the surface easier to wipe down during cleaning rounds. The coin return mechanism operates with the current 2017-issue British £1 coin, which removes any compatibility concerns for sites that have been running older locker stock.

• Anti-bacterial powder coat helps control pathogen risk in hygiene-critical sites
• Sloping top simplifies cleaning and discourages surface clutter
• Wall-fixable and nestable, useful where floor space is limited
• Welded plinth between compartments adds structural strength
• Compatible with current British £1 coin — no conversion required

This locker is well suited to catering operations, food production facilities, and hospitality venues with a staff changing requirement. It is available as a single unit but is equally practical banked in rows. For sites needing a higher number of compartments per unit, or requiring different locking mechanisms, it is worth discussing the wider range before ordering.

If you are fitting out a changing area and want to talk through quantities, configuration, or compliance requirements, the team is happy to help.

This is a double door, full-height coin return locker from Elite Lockers, finished in graphite green powder-coated steel. Each unit provides two separate lockable compartments within a single upright column, with doors secured by a coin return mechanism compatible with the current British £1 coin. The coin return system removes the need for padlocks or master key administration, making it a practical choice wherever lockers are used by rotating staff or members of the public.

The locker is constructed from toughened steel throughout, with reinforced doors and a welded plinth between compartments to maintain structural rigidity under daily use. The powder coating carries an anti-bacterial treatment that inhibits the spread of common pathogens including MRSA and E. coli — a relevant consideration in food production environments, healthcare-adjacent settings, or any facility where hygiene standards are closely governed. At 25.3kg, the unit is substantial without being unmanageable, and can be wall-fixed or nested side by side to make efficient use of limited floor space.

In practical terms, this locker suits catering operations, food manufacturing sites, or hospitality venues where staff require secure, hygienic personal storage:

• Anti-bacterial powder coat supports hygiene compliance in food-safe environments
• Coin return mechanism eliminates padlock and key management overhead
• Reinforced doors and welded plinth provide durability under regular daily use
• Wall-fixable and nestable for flexible installation in compact changing areas
• Compatible with current-issue British £1 coins — no legacy coin concerns

The unit is floor-standing and requires no electrical or water connections. Installation is straightforward, though securing to a solid wall is advisable in high-traffic areas. The 300mm width makes it well suited to tighter changing rooms or corridors where deeper units would be impractical. For sites requiring more compartments per column or greater individual storage volume, alternative configurations are available within the range.

This locker is most appropriate for catering businesses, food production facilities, leisure centres, or hospitality venues needing reliable, hygienic staff storage with minimal day-to-day administration. If you are specifying lockers across a larger site or need help matching compartment count to staff numbers, the team is happy to talk it through before you commit to a quantity.

This is a double-door steel locker fitted with a manual combination lock mechanism and a sloping top panel. It is finished in a green anti-bacterial powder coating and is intended for use in staff changing areas, back-of-house environments, and anywhere that personal storage needs to meet hygiene standards.

The locker is constructed from toughened powder-coated steel with reinforced doors and a welded plinth between compartments. In practical terms, this means it holds up well under the daily wear of a busy staff area — repeated door use, occasional knocks, and the kind of general abuse that lighter-gauge lockers can struggle with over time. The anti-bacterial coating is designed to inhibit the spread of bacteria including MRSA and E. coli, which makes it a considered choice for food production sites, healthcare kitchens, and similar hygiene-sensitive settings.

• Sloping top prevents items being stored on top, reducing dust accumulation and discouraging misuse
• Manual combination lock removes the need to manage keys or fobs
• Anti-bacterial powder coating supports hygiene compliance in regulated environments
• Can be wall-fixed or nested side by side to suit available space
• Welded plinth between compartments adds structural integrity

At just under two metres tall with a relatively shallow depth, this locker works well where floor space is limited. It can be secured to a wall or grouped in banks, making it adaptable to most changing room layouts. The powder-coated finish is durable but worth considering in environments with heavy moisture — adequate ventilation in the changing area will extend the finish's service life.

This locker suits catering businesses, food production facilities, hotels, and healthcare sites where staff storage needs to meet basic hygiene requirements. It is a practical single-bay solution; for larger teams or higher-volume installations, a wider range of configurations is available.

If you are fitting out a changing area and want to talk through the right quantity, layout, or specification for your site, the team is happy to help before you place an order.

This is a double-door, two-compartment staff locker from Elite Lockers, constructed from toughened powder-coated steel and secured with a manual combination lock mechanism on each door. It is designed for permanent installation in staff changing areas, back-of-house corridors, and similar environments where durable, lockable personal storage is required.

The powder coating applied to this locker carries anti-bacterial properties that resist the spread of pathogens including MRSA and E. coli. In catering and food production environments, where hygiene standards extend beyond the kitchen itself, this is a practical specification worth noting — particularly in sites subject to environmental health inspection or HACCP audits.

The construction is robust enough for sustained daily use in commercial environments. Key practical features include:

• Anti-bacterial powder-coated steel finish in green
• Reinforced doors on both compartments
• Welded plinth between compartments for structural integrity
• Manual combination lock — no keys or padlocks to manage
• Wall-fixable and nestable for flexible installation in tighter spaces

At 1800mm tall with a relatively compact footprint, this locker is well suited to sites where floor space is limited. It can be secured directly to a wall or grouped with additional units. The green finish is a powder-coated option and should be considered when matching to existing changing room schemes or where colour-coding of staff areas is in use.

This model is suited to smaller teams or where two compartments per unit is the right fit. For larger staffing numbers or higher-volume storage requirements, wider multi-door configurations may be more appropriate.

If you are fitting out a changing area and are unsure about the right quantity, layout, or specification, the team is happy to talk it through before you order.

This is a double door staff locker from Elite Lockers, finished in red with a sloping top and fitted for padlock use. The sloping top prevents items being left or stored on top of the unit — a practical detail that matters in busy changing areas where clutter accumulates quickly. Between the two doors sits a welded plinth, which strengthens the frame and adds a meaningful degree of inter-compartment security compared with lockers that rely solely on the door and lock.

The locker is constructed with a tough epoxy polyester powder coated paint finish, which holds up well in the damp, high-traffic environments typical of staff changing rooms, back-of-house corridors, and welfare areas. The red finish makes it straightforward to colour-code locker banks by team, department, or access level — a common approach in larger operations.

From an operational standpoint, the double door configuration gives two users a dedicated, lockable compartment within a single locker footprint. Each compartment includes double coat hooks, allowing staff to hang uniform and outer clothing separately. Key practical points to note:

• Padlock fittings included — padlocks are not supplied and must be sourced separately
• Sloping top prevents storage on top of the unit
• Welded plinth between doors improves inter-compartment security
• Powder coated finish suitable for damp back-of-house environments
• Red finish supports colour-coded locker bank organisation

At 1950mm tall, this locker suits most standard ceiling heights in commercial welfare areas. The 450mm depth provides a reasonable hanging depth for coats and uniforms without excessive floor space impact. At 23.4kg, two people should handle installation comfortably, though a survey of fixing points is advisable where the floor surface is uneven.

This locker is well suited to hospitality, healthcare, and food production sites where staff changing facilities are required. It works equally well as a standalone unit or within a larger bank. If your site requires lockers for very large teams or needs features such as integrated ventilation or electronic locking, it is worth discussing the fuller range before ordering.

If you are specifying lockers for a new welfare area or replacing existing provision, our team is happy to talk through the layout and configuration options before you commit.

This Elite double door padlock locker is a freestanding steel storage unit designed for staff changing rooms, back-of-house areas, and commercial premises where secure personal storage is required. Each unit houses two separate compartments, each secured by a padlock fitting rather than a built-in lock, meaning operators can use their own padlocks and replace them independently if lost or damaged.

The construction is solid and practical. The doors are reinforced to resist everyday wear, and a welded plinth runs between the two compartments to improve inter-compartment security — reducing the risk of access between adjacent sections. The tough epoxy polyester powder coated paint finish in red provides a durable surface that holds up well against knocks, moisture, and the general demands of a busy back-of-house environment. The flat top design allows units to be stacked or positioned side by side cleanly without wasted space.

Key practical features include:

• Padlock fitting on each door — operators supply and control their own padlocks
• Welded plinth between compartments for improved inter-compartment security
• Reinforced doors for added resistance to everyday impact
• Epoxy polyester powder coat finish for durability and moisture resistance
• Flat top design suited to single-row or stacked configurations

At 1800mm tall, this is a full-height locker suitable for hanging coats and storing personal belongings. It is well suited to smaller teams or sites where each person requires two separate storage compartments — for example, to keep work clothing separate from personal items. For larger teams or higher-security environments, a locker with an integrated lock mechanism or a multi-door bank arrangement may be worth considering.

If you are fitting out a staff area and are unsure how many units you need or how best to configure the space, the team is happy to talk it through before you order.

This is a full-height, double-door locker from Elite Lockers, constructed from powder coated steel with a welded frame and reinforced doors. Each compartment is secured by an electronic combination lock, removing the need for keys or padlocks. The sloping top discourages items being left on top of the unit and helps keep the surrounding area tidy. The red powder coat finish makes it a practical choice where colour-coded zoning or a more considered aesthetic is required.

In busy staff areas — changing rooms, back-of-house corridors, or welfare facilities — lockers take considerable daily punishment. The welded steel construction and reinforced door hinges on this unit are designed to hold up under repeated use across multiple shifts. The electronic lock mechanism avoids the ongoing cost and inconvenience of lost keys or cut padlocks, which is a genuine operational consideration in high-turnover environments.

• Electronic combination lock removes key management entirely
• Anti-bacterial coating helps support hygiene standards in food environments
• Sloping top prevents storage on top of the unit
• Pre-drilled rear fixing points allow wall anchoring for added stability
• Welded plinth between compartments adds structural rigidity

At 1950mm tall, this is a full-height unit. It requires a flat, level floor and sufficient ceiling clearance. The pre-drilled fixing points at the rear allow it to be anchored to a masonry or stud wall, which is advisable in high-traffic locations. No electrical connection is required — the electronic lock is self-contained. At 26.3kg, two people should be able to move and position it without specialist handling equipment.

This locker suits catering and hospitality operators looking for a reliable, low-maintenance staff locker where key management is a concern. The double-door configuration offers two separate secure compartments within a single footprint, which can be a practical choice where space is limited. For larger sites needing to equip an entire changing room, units in this range can be ordered in quantity and are available in a range of colours to suit any layout or zoning requirement.

If you're specifying lockers for a new facility or a refurbishment and want to talk through the right configuration, our team is happy to help.

This is a double-door staff locker from Elite Lockers, finished in red powder coated steel and secured with an electronic combination lock mechanism. Each door operates independently, giving two users separate secure compartments within a single locker unit. The electronic lock removes the need to manage physical keys, which is a practical advantage in environments with high staff turnover or shift-based working patterns.

The locker is built on a welded steel frame with reinforced doors and welded plinths between compartments. In practice, this construction holds up well in busy changing rooms and back-of-house areas where lockers take regular, heavy use. The powder coated finish is robust enough for day-to-day knock and scuff, and the red colour option makes these a reasonable choice for sites where a defined staff area colour scheme is in place.

A few practical points worth noting before purchasing:

• Anti-bacterial coating applied to surfaces to help reduce cross-contamination risk
• Pre-drilled fixing points at the rear allow the unit to be secured to a wall for stability
• Electronic combination lock — no keys to manage or replace
• Welded frame and reinforced doors provide a solid level of security for personal belongings
• Red powder coated finish suits environments with a colour-coded zoning approach

At 1800mm tall, this is a full-height locker unit. It will need clear floor and wall space, and the rear fixing holes mean wall access is required during installation. The unit weighs 25.3kg, so two people are advisable for positioning and fixing. It is not designed to be freestanding without wall fixing where stability is a concern.

This locker suits food service businesses, hospitality venues, and care or health settings where staff storage space is needed alongside a degree of hygiene consideration. It is well suited to small or medium-sized teams. For larger sites needing multiple banks of lockers, or different door configurations, there are wider options within the Elite Lockers range worth considering alongside this model.

If you are fitting out a staff area and want to talk through how many units you need or how best to configure them, we are happy to help before you order.

This Elite double door locker is a freestanding, two-compartment storage unit designed for staff changing areas, back-of-house corridors, and welfare facilities in commercial environments. Each compartment is secured by a camlock, and the sloping top discourages items being left on top of the unit — a practical detail in shared or supervised spaces. The unit is finished in red using a tough epoxy polyester powder-coated paint, which provides a durable, cleanable surface well suited to the wear and humidity typical of catering and hospitality back-of-house areas.

The welded plinth between the two doors is a notable construction detail. Rather than a shared central post, the welded plinth improves inter-compartment security, reducing the risk of one door's fixings being used to compromise the adjacent compartment. Each door is fitted with a double coat hook inside, giving occupants a functional hanging point for uniforms, bags, and personal items.

From an operational standpoint, this locker suits premises where staff need secure, individual storage without the complexity of a padlock system. The camlock arrangement keeps the aesthetic tidy and removes the need to manage padlock procurement or replacement.

• Epoxy polyester powder coat holds up well in humid or high-traffic back-of-house environments
• Sloping top discourages accumulation of items in communal spaces
• Camlock fittings provide clean, self-contained security per compartment
• Welded plinth construction adds inter-compartment integrity
• Double coat hooks inside each door support practical daily use

If you're equipping a larger facility or need a different configuration — more doors, alternative depths, or a flat-top option — it's worth discussing your layout before ordering. The locker range covers a number of configurations, and getting the right fit first time avoids complications on installation day. Feel free to get in touch with the team if you'd like a hand working through the options.

This is a double door steel locker from Elite Lockers, finished in graphite red powder coated steel and fitted with a coin return locking mechanism that accepts the current British £1 coin. Each door secures an individual compartment, making it a practical choice wherever a number of users need to store personal belongings safely during a shift or session.

The unit is built around a welded steel frame with reinforced doors and welded plinths between compartments. That construction holds up well in high-footfall environments where lockers are opened and closed repeatedly throughout the day. The anti-bacterial coating applied to the unit is a practical consideration for settings where hygiene is a priority, such as healthcare facilities, sports centres, or food production areas.

A few features are worth noting from an operational standpoint:

• Sloping top prevents items being stored above eye level, reducing the risk of falling objects
• Pre-drilled rear fixing points allow the unit to be secured to a wall for additional stability
• Coin return mechanism removes the need to manage key deposits or padlock supplies
• Anti-bacterial coating helps support hygiene compliance in regulated environments
• Powder coated finish offers reasonable resistance to knocks and cleaning products

Installation is straightforward. The unit is free-standing but the rear fixing holes make wall anchoring simple where a building risk assessment requires it. At 26.3kg it can be manoeuvred by two people without specialist equipment. The sloping top means these units cannot be stacked or used to gain access to high shelving, which is by design. Consider floor loading and fixing substrate before installation in older buildings.

This locker is well suited to staff changing areas, leisure and sports facilities, healthcare environments, and educational settings where self-managed coin return is preferred over padlocks or key-operated locks. For sites requiring a larger number of compartments or heavier-duty construction for industrial use, higher-specification alternatives are available in the range.

If you are specifying lockers across a larger installation or have questions about the right configuration for your site, the team is happy to talk it through before you commit to an order.

This Elite double door locker is a full-height, two-compartment storage unit built from powder-coated steel. It is designed for environments where personal belongings need to be secured reliably throughout the working day, with each compartment operated by a coin return mechanism that accepts the current British £1 coin. The graphite red finish gives it a more considered appearance than standard grey lockers, making it a reasonable choice for staff areas where presentation matters alongside function.

The welded steel frame and reinforced doors are built to withstand the kind of repeated use that comes with high-occupancy environments — busy hospitality back-of-house areas, changing rooms, or staff corridors where lockers are cycled through multiple shifts. Reinforced welded plinths between compartments add structural integrity under heavy daily use, and the coin return mechanism avoids the ongoing cost and administration of key replacement or combination resets.

Practical features worth noting include:

• Antibacterial coating to help limit surface contamination in close-contact environments
• Pre-drilled rear fixing holes for straightforward wall mounting and improved stability
• Coin return lock requiring no ongoing key management or master key system
• Powder-coated steel construction resistant to knocks and general wear
• Flat top profile allowing units to be stacked or arranged without wasted overhead space

At 1800mm tall, this is a full-height unit and requires adequate ceiling clearance and a stable, level floor. At 25.3kg it can be positioned by two people without lifting equipment, though wall fixing is advisable in higher-footfall areas. The 300mm width means multiple units can be banked together in relatively narrow corridors. No electrical or plumbing connections are required.

This locker suits catering businesses, hospitality venues, and food production sites where staff storage is needed and key-based systems have proven difficult to manage. For larger sites requiring higher locker counts or different configurations, wider or multi-door options may be more appropriate — it is worth discussing your layout before ordering.

If you are unsure how many units your site needs or whether this configuration suits your space, we are happy to talk it through.

This is a full-height, double-door locker from Elite Lockers, finished in red powder coated steel and fitted with a manual combination lock mechanism. The sloping top panel discourages items being left on top of the unit, which is a practical consideration in high-footfall environments where clutter and hygiene both need managing.

The locker is built around a welded steel frame with reinforced doors and welded plinths between compartments. That construction approach holds up well in settings where lockers are used repeatedly throughout the day — staff canteens, leisure facilities, changing rooms, and similar environments where the hardware takes consistent wear. The anti-bacterial coating applied to the surface is a sensible addition for shared facilities, where reducing surface contamination is a genuine operational concern rather than a marketing point.

From an installation standpoint, the unit comes with pre-drilled fixing points at the rear, allowing it to be secured to a wall for additional stability — particularly worthwhile where the locker will be freestanding in a corridor or open changing area. At 26.3kg, it can be manoeuvred by two people without specialist equipment, though access to the fixing wall and floor level should be assessed before installation.

• Manual combination lock — no keys to manage or replace
• Sloping top reduces surface clutter and deters unauthorised storage
• Anti-bacterial coating suited to shared hygiene-sensitive environments
• Reinforced doors and welded construction for consistent daily use
• Pre-drilled rear fixing points for wall-mounted stability

This locker is well suited to staff areas, gyms, leisure centres, schools, and healthcare settings where reliable, key-free security is a priority. For sites requiring a larger bank of lockers or alternative configurations, other door counts and finishes are available across the range.

If you are specifying lockers for a larger fit-out or have questions about configuration, our team is happy to talk through the options before you order.

This is a full-height, double door locker from Elite Lockers, finished in red powder coated steel and secured with a manual combination lock mechanism. It is designed for environments where personal belongings need to be stored securely without the ongoing cost or management overhead of key or padlock systems. The combination lock removes the need for key administration, which is a practical advantage in sites with high staff turnover or shift-based rotas.

The locker is constructed from welded steel with reinforced doors and welded plinths between compartments, giving it the structural rigidity expected in busy commercial or institutional settings. The powder coated finish offers reasonable resistance to everyday knocks and surface wear. An anti-bacterial coating is applied to the surfaces, which is a relevant consideration in food production, healthcare, or any environment where hygiene standards need to be maintained.

From an installation standpoint, the unit arrives ready to position. Pre-drilled fixing holes at the rear allow it to be secured to a wall, which improves stability particularly where lockers are arranged in banks. It is worth confirming that the floor and wall surfaces are suitable before fixing, and that adequate clearance exists for both doors to open fully given the depth of the unit.

• Manual combination lock — no keys to manage or replace
• Anti-bacterial coating suited to hygiene-sensitive environments
• Reinforced welded construction for durability under regular use
• Wall-fixable via pre-drilled rear holes for added stability
• Bold red finish for easy identification in larger locker banks

This locker is well suited to catering operations, food production facilities, leisure centres, and similar commercial or institutional sites where staff storage is required. For sites needing a larger number of smaller individual compartments, a multi-door configuration may be worth considering instead.

If you are specifying lockers across a larger site or are unsure which configuration best fits your layout and user numbers, we are happy to talk it through before you place an order.

This is a full-height, double door steel locker from Elite Lockers, finished in red epoxy polyester powder coat. Each unit houses two separate compartments, each secured independently by a camlock, with a welded plinth between the doors to reduce the risk of access between compartments. The reinforced door construction adds to the overall robustness of the unit.

Steel lockers of this type are a practical, long-term storage solution in commercial and institutional environments. The powder coat finish resists knocks and surface corrosion better than painted alternatives, and the red finish makes it straightforward to colour-code storage areas — useful in larger facilities where zoning by role or department is a practical requirement.

Key construction and operational points worth noting:

• Camlock on each door — simple, key-operated, no combination to reset or forget
• Welded plinth between compartments improves inter-compartment security
• Reinforced door construction reduces flex and wear under regular use
• Tough epoxy polyester powder coat finish for durability in working environments
• Flat top design for straightforward installation against walls or in rows

At 1800mm tall, this locker is a standard full-height unit and will require adequate ceiling clearance and floor space. At 22.5kg, installation is manageable with two people, but siting should be planned before delivery — access routes and final positioning matter more than people expect. The unit is free-standing and does not require wall fixing, though anchoring in rows is advisable in busy environments.

This locker is well suited to staff changing areas, back-of-house storage, schools, leisure facilities, and similar settings where secure individual storage is needed. For sites requiring higher-density storage or additional security features, heavier-duty configurations are available within the range.

If you are fitting out a larger changing facility or need to match existing locker colours, it is worth speaking with us before ordering — getting the configuration right from the outset saves time and avoids unnecessary returns.

This is a double door padlock locker from Elite Lockers, finished in blue with a sloping top to discourage storage of items above the unit and help maintain a tidy, clutter-free environment. Constructed with a tough epoxy polyester powder coated paint finish, it is built to withstand the day-to-day demands of a busy staff changing area or back-of-house space. The welded plinth between the two doors is a practical security feature, improving the separation between compartments and reducing the risk of access between them.

In commercial environments where staff lockers see heavy daily use — hospitality, catering, healthcare, and food production sites among them — durability of finish and structural integrity matter considerably more than they might in a light-duty setting. The powder coated finish resists knocks, moisture, and general wear better than painted steel alternatives, and the welded construction means the unit holds its shape over time without the loosening you can see in flat-pack equivalents.

From an operational standpoint, the double door configuration allows two members of staff to share a single locker unit, making it an efficient use of floor space in areas where changing room or cloakroom space is limited. Each door compartment includes a double coat hook for hanging uniforms or outerwear. Key practical points to note:

• Sloping top prevents unauthorised storage above the locker
• Welded plinth between doors improves inter-compartment security
• Padlock fitting as standard — padlock is not supplied and should be sourced separately
• Powder coated finish suited to humid or high-traffic back-of-house environments
• Double coat hooks in each compartment for uniform and outerwear storage

At just over 23kg, the unit is manageable for a two-person installation but will need to be fixed or positioned carefully on level flooring, particularly in tiled areas. The sloping top configuration means the unit stands tall, so overhead clearance should be confirmed prior to ordering. This model is finished in blue; other colours are available within the Elite Lockers range for sites that require colour-coded allocation by team or department.

This locker is well suited to catering and hospitality operations needing a reliable, secure staff storage solution without excessive footprint. For larger sites with significant staff headcounts, multi-door configurations within the same range may offer a more practical layout. If you are specifying lockers for a new build or refurbishment and are unsure which configuration best fits your space and staff numbers, we are happy to talk it through before you commit to an order.

This Elite double door padlock locker is a straightforward, robust steel locker designed for staff changing areas, back-of-house storage rooms, and similar workplace environments. Each unit features two separate compartments stacked vertically, secured by padlock hasps rather than integrated locks — meaning staff supply their own padlock, which can simplify key management in high-turnover teams. The blue epoxy polyester powder-coated finish is durable and easy to wipe down.

The construction reflects the kind of durability expected in commercial environments. A welded plinth between the two doors improves security at the point where compartments meet, reducing the ability to access one section from the other. The reinforced door design adds rigidity, which matters in busy changing areas where locker doors tend to take daily wear. The powder-coated finish resists chipping and corrosion better than standard painted steel, which is worth considering in environments with fluctuating humidity.

Practical advantages for operators include:

• Two separate compartments per unit, allowing two staff members to share one locker bank position
• Padlock hasp design removes the cost and management of integrated lock systems
• Welded plinth reinforces inter-compartment security
• Powder-coated finish is straightforward to clean and maintains appearance over time
• Flat-top design allows units to be stacked or placed side by side without wasted space

Installation is uncomplicated — no electrical or plumbing connections are required. The unit can be positioned freestanding or secured to a wall for stability, which is advisable in areas with regular foot traffic. At 22.5kg, it can be manoeuvred by two people without specialist equipment. The flat-top profile means multiple units can be arranged in rows without unsightly gaps at the top.

This locker is well suited to catering businesses, hospitality venues, and food production sites needing practical, cost-effective staff storage. It suits smaller teams or supplementary locker provision where individual-lock systems would be overkill. For larger installations or sites with higher security requirements, heavier-duty or integrated-lock alternatives may be worth considering.

If you are fitting out a changing area and are unsure how many units you need or how best to configure the space, we are happy to talk it through before you order.

This is a freestanding double-door locker from Elite Lockers, finished in blue powder coated steel and secured by an electronic combination lock mechanism. Each unit features two individual compartments with reinforced doors and a welded plinth between sections, providing a solid, tamper-resistant structure suited to environments where lockers see heavy daily use.

Powder coated steel construction gives these lockers the durability needed in high-traffic locations. The frames are built to withstand routine knocks and pressure without deforming, and the anti-bacterial coating provides resistance to MRSA and E-coli — a practical consideration for facilities with shared or communal changing areas. The electronic locking system removes the need for physical keys, reducing the administrative overhead of lost or duplicated keys across large installations.

Practical advantages worth noting for facilities managers and site operators include:

• Electronic combination lock removes key management across multiple users
• Anti-bacterial coating meets hygiene requirements in shared staff areas
• Reinforced doors and welded plinth construction improve resistance to forced entry
• Blue powder coat finish is durable and maintains appearance under regular use
• Sloping top deters the accumulation of items or litter on top of the unit

These lockers are commonly specified for staff changing rooms, school and university facilities, hotel back-of-house areas, and training centres. The sloping top design is a practical choice where housekeeping is a concern. At just over 26kg per unit, they can be moved and positioned without specialist lifting equipment, though fixing to a wall or floor is advisable in permanent installations for stability.

This model is well suited to single or small-group installations. Sites requiring a larger bank of lockers, or facilities with particularly heavy throughput, may benefit from exploring higher-capacity or heavier-duty configurations within the range.

If you are specifying lockers across a larger site or need guidance on layout and quantities, our team is happy to talk through the options with you.

This is a full-height, double-compartment locker manufactured from powder-coated steel and fitted with an electronic combination locking mechanism. Each door operates independently, giving two separate secured storage spaces within a single unit. The blue powder-coat finish is applied to the steel frame and doors, providing both a consistent appearance and a layer of protection against the knocks and surface wear typical in busy communal environments.

Powder-coated steel construction holds up well in high-footfall settings. The reinforced doors and welded plinth between compartments add structural rigidity, which matters in locations where lockers are in near-constant use throughout the day. The anti-bacterial coating offers resistance to MRSA and E-coli, which is a practical consideration for hospitality, healthcare-adjacent, and food-preparation staff areas where hygiene standards are a priority.

The electronic locking mechanism removes the need for physical keys, which simplifies day-to-day management — no lost keys, no lock replacements, and no need to reissue access for each new user. This makes the units particularly practical for shift-based workforces where locker allocation changes frequently.

• Double-compartment design offers two independently secured storage spaces
• Anti-bacterial coating resistant to MRSA and E-coli
• Electronic combination lock removes dependency on physical keys
• Reinforced doors and welded plinth for structural durability
• Powder-coated steel finish suited to high-footfall environments

These lockers are well suited to staff changing areas in hotels, catering operations, schools, universities, and training facilities. For sites requiring larger storage volumes per user or higher quantities of units across a single installation, it is worth discussing your full layout requirements before ordering.

If you are fitting out a staff area and would like to talk through quantities, configuration, or colour options, the team is happy to help you plan it properly.

This is a full-height, double door staff locker from Elite Lockers, finished in blue with a sloping top to discourage items being stored on top of the unit. It uses a camlock fitting on each door and includes a welded plinth between the two compartments, which reinforces the structure and improves security between adjacent doors. Each compartment is fitted with a double coat hook. Construction is in steel with a tough epoxy polyester powder coated paint finish, which holds up well in the kinds of environments where staff lockers are typically installed — changing rooms, back-of-house corridors, and welfare facilities that see daily heavy use.

The sloping top is a practical detail worth noting for busy sites. It prevents the surface being used as informal storage for bags, boxes, or catering supplies, which helps keep welfare areas tidy and compliant with workplace standards. The camlock mechanism is straightforward to use and reliable in daily service — staff can operate it quickly at the start and end of a shift without fuss.

Key practical points for this locker:

• Welded plinth between doors improves inter-compartment rigidity and security
• Sloping top prevents surface accumulation of items
• Double coat hooks in each compartment for workwear and personal items
• Powder coated finish resists knocks, moisture, and general wear
• Camlock fittings included; no padlock required

At just under two metres tall and 300mm wide, this unit suits sites where floor space is limited. It is worth confirming your available width and ceiling height before ordering, particularly in older buildings where corridors and welfare rooms can vary considerably. The 23.4kg weight means it can be moved and positioned by two people without specialist equipment, though it should be secured to a wall once installed for stability.

This locker is well suited to catering operations, hospitality venues, and food production sites where staff require secure personal storage during their shift. It works equally well in schools, leisure facilities, and any workplace requiring compact, reliable locker provision. If you are fitting out a larger changing room and need a higher door count or greater depth, options with more compartments or a 450mm depth are available within the range.

If you are unsure which configuration best suits your space or staff numbers, we are happy to talk it through before you order.

This double door locker from Elite Lockers is a powder coated steel storage unit fitted with a coin return mechanism and a sloping top panel. Each unit houses two independently secured compartments, making it practical for shared staff areas, changing rooms, and other high-footfall environments where personal storage needs to be both reliable and tamper-resistant.

Powder coated steel construction gives the locker durability under sustained daily use. The welded plinth between compartments adds structural integrity where repeated opening and closing puts stress on the frame, and the reinforced doors contribute to a secure feel without requiring a dedicated padlock. The coin return mechanism accepts the current British £1 coin, which removes the need for key management and keeps lost-key administration to a minimum — a practical advantage in busy workplaces or hospitality settings where staff turnover can be high.

The sloping top is a considered design detail for environments where hygiene standards matter. It discourages items being left on top of the unit and reduces the flat surfaces where dust and debris accumulate, making routine cleaning more straightforward.

• Anti-bacterial coating provides resistance to MRSA and E. coli
• Coin return locking removes the cost and admin of key management
• Sloping top reduces dust accumulation and aids routine cleaning
• Graphite blue powder coat finish is durable and professional in appearance
• Welded plinth and reinforced doors support security in high-traffic areas

This locker is well suited to schools, universities, hotels, leisure facilities, and staff changing areas where a balance of security, hygiene, and low maintenance is required. For sites needing a larger number of compartments within a smaller footprint, alternative configurations within the Elite range may be worth considering.

If you are specifying lockers for a larger installation or are unsure which configuration suits your layout, the team is happy to work through the options with you.

This Elite double-door locker is a two-compartment steel storage unit finished in graphite blue powder-coated steel, each compartment secured by a coin return mechanism compatible with the current British £1 coin. The coin return system means no key management is required — users insert a coin to release the lock and retrieve it when they vacate, making it a practical choice wherever locker turnover is high throughout the day.

Built from powder-coated steel with reinforced doors and a welded plinth between compartments, the unit is designed to withstand the kind of daily wear associated with high-footfall environments. The antibacterial coating provides resistance to MRSA and E-coli, which is a relevant consideration in food service, hospitality and healthcare settings where hygiene standards are closely managed.

In practical terms, the design suits environments where operators want secure, self-managing storage without the overhead of key administration:

• Coin return mechanism removes the need for key issuance and tracking
• Antibacterial coating supports hygiene compliance in regulated environments
• Reinforced doors and welded plinth construction resist impact and forced entry attempts
• Powder-coated steel finish is durable and straightforward to wipe down
• Double-door configuration provides two independent secure compartments per unit

In terms of installation, this is a freestanding unit — no fixings or utilities are required. At 25.3kg it can be positioned and repositioned without specialist equipment, though it is worth considering floor loading and layout when deploying multiple units together. The flat-top profile allows units to be stacked or placed side by side cleanly, which is useful where space is being used efficiently.

This locker is well suited to staff changing areas, hotel back-of-house, schools, leisure facilities and similar settings where coin-operated self-service lockers are appropriate. For sites requiring more compartments per bay, or heavier-duty construction for particularly demanding environments, alternative configurations are available in the range.

If you are planning a larger installation or want to discuss which configuration best fits your site layout, the team is happy to talk it through before you order.

This is a full-height, double-door steel locker finished in blue powder coated steel, fitted with a manual combination lock on each door and a sloping top section to discourage storage of items above the unit. It is a straightforward, practical locker designed for staff and visitor use in environments where a key-based system is not preferred or practical.

The powder coated steel construction gives the unit solid resistance to everyday knocks and surface damage in busy areas. The welded plinth between compartments and reinforced doors add structural integrity, making these lockers well suited to high-traffic locations where regular, heavy use is expected. The anti-bacterial coating provides resistance to MRSA and E. coli, which is a relevant consideration in catering, healthcare, and food preparation environments where hygiene standards are closely managed.

From an operational perspective, the combination lock removes the ongoing management burden of keys — no lost keys, no replacement costs, and no need to recut locks when staff change. The sloping top prevents dust accumulation and discourages unofficial use of the top surface as a storage shelf, which helps maintain a tidier appearance over time.

• Combination lock — no key management required
• Anti-bacterial coating suitable for food and healthcare environments
• Sloping top keeps surfaces clear and reduces dust build-up
• Reinforced doors and welded plinth for structural durability
• Powder coated steel finish resists everyday surface damage

These lockers are well suited to staff changing areas, back-of-house facilities, schools, hotels, and training centres. For sites requiring a larger number of units or alternative configurations, other locker formats are available in the range.

If you are fitting out a changing room or staff area and want to discuss quantities, layout, or whether this specification suits your environment, we are happy to talk it through before you order.

This is a full-height, double-door locker finished in blue powder coated steel, secured by a manual combination lock mechanism. Each unit provides two separate lockable compartments in a single upright frame, making it a practical choice where staff or visitors need secure personal storage without the ongoing cost or administration of key management.

Powder coated steel construction gives these lockers the structural resilience expected in high-footfall environments. The reinforced doors and welded plinth between compartments add rigidity, reducing flex and wear over time. An anti-bacterial coating provides resistance to MRSA and E-coli, which is a meaningful consideration in catering, healthcare, and education settings where hygiene standards are closely managed.

The combination lock removes the need to cut and reissue keys when staff turn over, which is a practical advantage in kitchens and hospitality venues where team composition changes regularly. Relevant operational benefits include:

• No key administration — combination can be reset between users
• Anti-bacterial coating suits food-service and healthcare environments
• Reinforced doors and welded plinth improve long-term security and durability
• Powder coated finish resists scratching and minor impact in busy changing areas
• Double compartment layout makes efficient use of wall space

At 1800mm tall, this locker is a standard full-height unit suited to wall runs in staff changing rooms, corridors, or back-of-house storage areas. The 300mm width per unit means it fits within typical locker bay layouts, though it is worth confirming available wall space and ceiling height before ordering, particularly where access is restricted during delivery. At 25.3kg, two-person handling on installation is advisable.

These lockers are well suited to catering businesses, hotels, schools, and leisure facilities needing reliable, low-maintenance personal storage. For sites requiring a larger number of compartments in a smaller footprint, alternative configurations — such as four or six-door variants — may be worth considering.

If you are planning a locker installation and want to talk through quantities, layout, or colour options, the team is happy to help you work through the detail before you commit.

This is a full-height, double-door steel locker finished in a blue epoxy polyester powder-coated paint. Each unit is constructed from robust steel and features a welded plinth between the two compartment doors, which improves inter-compartment security and reduces the likelihood of tampering between adjacent lockers. The doors are reinforced and secured with a camlock mechanism — a practical, low-maintenance locking solution commonly used in staff changing facilities.

In a working catering or hospitality environment, lockers take a fair amount of daily abuse — doors swung open, items shoved in quickly during service changeovers, and general wear from a busy team. The welded steel construction and powder-coated finish on this unit hold up well under that kind of use. The epoxy polyester coating resists chipping and surface rust better than a standard paint finish, which matters in environments where humidity levels can be elevated.

Practical advantages for operators include:

• Camlock fitting keeps maintenance requirements low with no padlock to replace
• Welded plinth between doors adds a structural security barrier between compartments
• Reinforced doors resist warping and resist forced entry better than lighter-gauge alternatives
• Powder-coated finish withstands humid changing room conditions without deteriorating quickly
• Blue finish helps with colour-coded zoning in larger locker rooms

At just over 22kg, the unit can be positioned without specialist equipment, though it should be fixed to a wall or floor per standard locker installation practice to prevent tipping. The footprint is relatively narrow, making it workable in corridor-style changing areas where space is limited. It is worth confirming floor loading if installing a bank of multiple units in a mezzanine or upper-floor changing room.

This locker is well suited to catering businesses, hotels, and hospitality venues needing reliable, secure individual storage for staff. It suits sites where a two-compartment layout per user is preferred — allowing personal items and workwear to be stored separately. For larger sites needing higher-density storage or multi-tier configurations, it is worth reviewing the wider range to ensure the layout and specification match your requirements.

If you are specifying lockers for a new or refurbished changing facility, we are happy to talk through quantities, layout, and colour options before you place an order.

This is a double door locker from Elite Lockers, finished in grey with a sloping top to discourage the accumulation of clutter or dust above the unit. Constructed with a welded plinth between the two doors, it provides a solid physical barrier between compartments — a practical detail that improves inter-compartment security compared with lockers where doors share an open frame. The body is finished in a tough epoxy polyester powder coated paint, which offers good resistance to the knocks and daily wear typical in busy staff areas.

In a working environment, lockers like this take considerable day-to-day abuse — doors swung hard, coats and bags crammed in, cleaning product splashes from nearby mop stations. The powder coated finish holds up well in these conditions and wipes clean easily, which matters in environments where hygiene standards extend beyond the kitchen itself. Each door compartment is fitted with double coat hooks, keeping personal belongings organised within the available space.

Practical considerations for this unit include its weight of 23.4kg, which means installation is a two-person job. At 1950mm high and 300mm wide with a 450mm depth, it suits most standard changing room and corridor layouts but is worth measuring against your available wall run before ordering. The sloping top means the unit cannot be stacked, and overhead clearance should be checked if ceiling height is limited. Padlock fittings are included but padlocks are not supplied, so factor that into your order.

This locker is well suited to catering businesses, hotels, and food production sites needing reliable personal storage for kitchen and front-of-house staff. For sites requiring more doors per unit or alternative colour finishes, other configurations are available within the Elite range.

If you are fitting out a changing area and want to talk through quantities, layout, or which configuration suits your team size, we are happy to help before you place an order.

This is a full-height, double-door steel locker finished in a tough epoxy polyester powder-coated paint in grey. Each unit features two individual compartments stacked vertically, secured by padlock hasp rather than a built-in lock — meaning staff supply their own padlock, and replacement is straightforward if a lock is lost or damaged. A welded plinth sits between the two doors, reinforcing the division between compartments and reducing the risk of items being passed between them.

In practice, lockers of this type are a reliable choice for staff changing areas, back-of-house corridors, and storage rooms in hotels, restaurants, contract catering sites, and similar hospitality environments. The powder-coated finish holds up well to the knocks and humidity typical of busy staff areas, and the construction is solid enough for daily use across a full working week.

A few practical points worth considering before ordering:

• Padlock hasp design — staff must provide their own padlocks, which also means consistent lock types across a bank of lockers need a little coordination
• Welded plinth between doors improves inter-compartment security compared to standard locker designs
• Reinforced doors add rigidity and help resist warping over time
• Powder-coated finish is durable but can chip if lockers are mishandled during installation — take care on site
• At 1800mm tall, these are full height and will require adequate ceiling clearance and stable, level flooring

These lockers are well suited to sites with moderate staff numbers looking for a dependable, straightforward solution. For larger sites needing to fit out a full changing room, it is worth thinking about whether a single-door configuration or a different bay arrangement might make better use of your available wall space. If you are fitting out a larger facility or are unsure how many units you need, we are happy to talk through the layout before you commit to an order.

This double door locker from Elite is a freestanding steel storage unit secured by an electronic combination lock mechanism. Each unit features two independently locked compartments within a single upright frame, finished in grey powder coated steel with a sloped top panel that prevents items being left or accumulated on top. It is designed for staff and visitor use in environments where reliable, keyless access control is a practical requirement.

The powder coated steel construction is treated with an anti-bacterial finish, which makes this locker a sensible choice for environments where hygiene standards matter — changing rooms, sports and leisure facilities, food production sites, and similar. The reinforced doors resist everyday knocks and the kind of heavy-handed use common in high-footfall settings. The sloping top is a considered design detail: it discourages storage on top of the unit and helps maintain a tidier environment over time.

From an installation standpoint, the unit arrives largely pre-assembled and includes pre-drilled fixing points at the rear, allowing it to be anchored to a wall for added stability where floor conditions or traffic levels make that advisable. No electrical connection is required — the electronic lock is self-contained. Key practical points to note:

• Electronic combination lock — no keys to manage or replace
• Anti-bacterial powder coated steel finish throughout
• Sloping top panel discourages unsanctioned storage
• Pre-drilled rear fixings for wall-mounting stability
• Suitable for back-of-house, leisure, and educational environments

This locker is well suited to catering operations, leisure facilities, schools, and any site where staff require secure personal storage without the overhead of key management. For larger deployments or sites with specific colour or configuration requirements, Elite offer a broader range of locker formats — it is worth discussing your layout and volume needs before ordering multiple units.

If you are specifying lockers for a larger fit-out or have questions about configuration, our team is happy to help you work through the options before you commit.