Warewashing Parts

The Seko WareDose 35 is a compact peristaltic dosing unit designed for single-machine commercial dishwasher and glasswasher installations. It manages both detergent and rinse aid dosing from a single housing, and incorporates a conductivity probe that monitors wash solution concentration continuously, adjusting dosing output in real time rather than working to a fixed timer cycle.

Chemical dosing is one of the more easily overlooked variables in warewashing, but it has a direct impact on hygiene compliance, wash results, and running costs. Timer-based systems are common and straightforward, but they cannot account for changes in water conditions, load variation, or shift patterns. When concentration drifts, the consequences range from poor wash results through to unnecessary chemical spend. The WareDose 35 addresses this by measuring actual conductivity in the wash tank and dosing accordingly — maintaining consistent levels across the full service period without manual intervention.

From an operational standpoint, the unit offers several practical advantages:

• Conductivity-controlled dosing holds concentration steady, reducing chemical waste and running costs
• Microprocessor control with LED display allows straightforward on-site programming and adjustment
• Peristaltic pump mechanism is inherently reliable; tubing is the only wear item and can be replaced without specialist tools
• Dual-pump configuration handles detergent and rinse aid from one compact unit, keeping the installation tidy
• Compact housing suits sites where space around the machine is limited

Installation involves mounting the unit in close proximity to the warewasher, routing the chemical tubing to the relevant containers, and fitting the conductivity probe in the correct position on the machine. Probe positioning and connection points vary between warewasher models, so compatibility with the specific machine should be confirmed before ordering. The WareDose 35 is intended for single-machine use; operations running multiple machines simultaneously or with sustained very high throughput may find a higher-capacity dosing solution more appropriate.

This unit is well suited to cafés, restaurants, pubs, hotel bars, and contract catering sites operating a single commercial dishwasher or glasswasher where reliable chemical control and cost management across long or busy service periods matter. Smaller operations using a basic timer-based unit may find the conductivity probe adds meaningful value over time, particularly where water hardness or usage patterns vary.

If you want to check compatibility with your existing machine or talk through your warewashing chemical setup before going ahead, our team is happy to work through the details with you.

The Seko PR4 is a peristaltic dosing pump designed to deliver liquid detergent to commercial dishwashers and glasswashers at a controlled, consistent rate. Peristaltic pumps work by compressing a flexible internal tube to move fluid, which keeps the chemical entirely isolated from the pump mechanism. This reduces wear on internal components and makes the unit practical to service without specialist tools.

In a commercial warewashing setup, accurate chemical dosing has a direct bearing on wash quality and running costs. Underdosing results in poor wash performance; overdosing wastes chemical and can interfere with rinse quality. The PR4 addresses this with an analogue speed adjustment that allows the dosing rate to be set precisely for the machine and detergent in use. Once the correct rate is established, tamper protection plugs can be fitted to hold the setting — a sensible precaution in busy kitchens where accidental adjustment is a genuine operational risk.

• Adjustable output suits different detergent concentrations and machine demands
• Chemical isolation from the pump mechanism reduces maintenance requirements
• Compatible with wall mounting or internal fitting within most warewashing equipment
• Simple trimmer adjustment keeps commissioning time to a minimum
• Tamper protection maintains consistent dosing once the rate is confirmed

Installation is straightforward for a qualified engineer. Correct positioning relative to the detergent container and the machine draw point is important for reliable priming, so it is worth planning the installation carefully before fitting. If you are switching detergent products or moving from a different dosing system, confirming viscosity and concentration compatibility with your chemical supplier beforehand will save time.

The PR4 is well suited to single-site operations running one or two warewashers where a reliable, adjustable dosing solution is needed without the complexity of a larger system. Sites running multiple machines or processing higher chemical volumes may be better served by a higher-capacity dosing arrangement.

If you are not certain whether the PR4 is the right match for your machine or detergent, our team is happy to talk it through before you place an order.

The Seko PR1 is a peristaltic dosing pump designed to deliver rinse aid consistently to commercial dishwashers and glasswashers. Rather than using valves or internal seals in direct contact with the chemical, the peristaltic mechanism works by squeezing fluid through a flexible tube. This approach is inherently well suited to handling rinse aid concentrates, which can degrade conventional pump mechanisms over time.

In day-to-day kitchen use, consistent rinse aid dosing has a direct bearing on glass clarity, drying performance, and how quickly spotting or streaking appears on crockery and glassware. The PR1 allows flow rate to be fine-tuned via a trimmer dial, enabling calibration to suit both the machine's cycle timing and local water hardness — two factors that vary considerably from site to site. Once the correct setting is established, tamper protection plugs prevent accidental adjustment by kitchen staff, which is a practical consideration wherever multiple people work around the machine.

• Adjustable flow rate via trimmer dial to match machine and water conditions
• Tamper protection plugs hold calibrated settings during service
• Peristaltic mechanism limits chemical contact with pump internals
• Low power draw suits continuous full-day operation
• Compact form supports both wall mounting and in-machine installation

The pump can be wall mounted close to the machine or fitted internally within most warewashing equipment, and it runs from a standard electrical supply with minimal power draw. It is compatible with the majority of commercial dishwashers and glasswashers, whether as a replacement for a worn unit or as an upgrade to an existing dosing arrangement.

The PR1 is commonly used in pubs, restaurants, hotels, and contract catering operations where reliable rinse aid delivery is a routine requirement. If you are fitting this to a specific machine or want to confirm the flow range suits your setup, the team is glad to talk it through before you order.

This external control panel is a purpose-built accessory for Sammic UX series pass-through dishwashers. It provides a remote access point to the machine's control board, intended for installations where the dishwasher's integrated panel is difficult to reach during normal operation — a common situation when machines are set into a run of cabinetry, built into a passthrough counter, or positioned in a way that restricts front access.

In a busy kitchen environment, operators need to be able to adjust wash cycles, monitor programmes, and respond to alerts without interrupting the flow of service. When the standard panel is obscured or awkward to reach, this becomes a practical problem. The external panel relocates that control point to a more accessible position, which keeps service running smoothly without requiring staff to manoeuvre around equipment mid-shift.

The panel carries an IP65 rating for humidity protection, which is appropriate for the warm, steam-heavy environment around commercial warewashing equipment. It connects back to the dishwasher at a maximum distance that allows reasonable flexibility in positioning without requiring extensive installation work.

This is a relatively straightforward accessory, but it's worth confirming compatibility with your specific UX model before ordering, and thinking carefully about where the panel will be mounted to ensure it genuinely improves accessibility in your layout. If you're specifying a pass-through dishwasher installation and have any questions about whether this panel suits your configuration, we're happy to talk it through.

The Sammic CA extraction hood is a purpose-made accessory for the SRC-1800 rack conveyor dishwasher, supplied here as a retrofit kit for sites where the option was not included at the point of original purchase. It fits to the exit end of the machine, combining a splash shield with a ducted outlet that connects to a remote extraction or ventilation unit.

In busy warewashing environments, the unload end of a conveyor dishwasher generates a significant amount of steam and moisture. Without managed extraction at that point, steam disperses into the surrounding area, creating damp working conditions and potential slip hazards from condensation settling on nearby surfaces. This hood channels that steam away at source, keeping the unloading station cleaner and more comfortable during continuous service.

A practical detail worth noting is that fitting this kit does not extend the overall footprint of the SRC-1800 installation — a useful consideration in kitchens where space around the machine is already constrained.

• Reduces steam and moisture dispersal at the dishwasher exit point
• Improves working conditions at the unloading station during peak service
• Helps keep surrounding floor surfaces drier and safer
• Retains the original machine footprint after fitting
• Connects to an existing remote extraction system via the ducted outlet

This kit requires connection to a compatible remote extraction unit — it is not a self-contained extractor. Before fitting, it is worth confirming that your existing ventilation or extraction setup can accommodate the additional outlet. Installation should be carried out by a competent engineer familiar with the SRC-1800.

This accessory is suitable specifically for the Sammic SRC-1800 conveyor dishwasher and is not a universal fit. It is particularly relevant for installations where the machine discharges into a busy service corridor or a confined wash-up area where steam management matters.

If you are unsure whether this kit is compatible with your current setup or extraction arrangement, we are happy to talk it through before you order.

The Sammic CV extraction hood with steam condensation is a purpose-built accessory for Sammic rack conveyor dishwashers. Rather than allowing steam to vent freely into the kitchen environment, the unit captures and condenses steam at source, feeding recovered heat back into the incoming water supply to support the rinsing circuit. The result is a measurable reduction in ambient steam without requiring a separate mechanical extraction canopy above the machine.

In a busy warewashing environment, uncontrolled steam is a persistent operational problem — it raises kitchen temperatures, contributes to condensation on surfaces, and creates uncomfortable working conditions for staff. This unit addresses that directly. By condensing steam internally and recirculating the recovered thermal energy, it also reduces the temperature demand placed on the incoming water supply, which has a tangible effect on energy consumption over a full service period.

From a practical standpoint, the key operational advantages are:

• Steam condensed at source, reducing ambient moisture in the warewashing area
• Recovered heat fed back into the rinsing circuit, supporting wash efficiency
• Removable filter to manage grease and particulate build-up, simplifying maintenance
• Vertically mounted fan motor with double seal, designed to prevent water ingress
• Reduces reliance on overhead canopy extraction in some installations

On installation, it is worth noting that this unit is supplied fitted to Sammic rack conveyor machines rather than as a universal retrofit. Compatibility with your specific machine configuration should be confirmed before ordering. It does not eliminate the need for kitchen ventilation entirely — local building regulations and the specific layout of your warewashing area will still govern what extraction provision is required.

This accessory is well suited to kitchens where steam management is a concern and where reducing ongoing energy costs in the warewashing section is a priority. It is most relevant in high-throughput sites running conveyor machines through extended service periods. If you are unsure whether this unit is appropriate for your current machine or your site's ventilation requirements, the team is happy to talk it through with you.

The Sammic EV extraction hood is a steam extraction unit designed specifically for use with Sammic rack conveyor dishwashers. It arrives pre-installed on compatible machines and is intended to draw steam and heat away from the wash area during operation, helping to keep the surrounding kitchen environment more comfortable and reducing moisture build-up at the dishwasher exit point.

In a busy warewashing environment, steam management is a practical concern rather than an afterthought. Rack conveyor machines run continuously through service and generate significant steam output, particularly at the unloading end. The integrated motor provides active extraction rather than passive venting, which makes a noticeable difference in kitchens where the dishwasher is positioned in a confined area or close to a food preparation zone. The removable fat filter captures grease and airborne residues before they reach the extraction duct, which is particularly relevant in kitchens that also handle frying or high-fat menu items.

• Active motor-driven extraction reduces steam build-up around the unload end
• Removable fat filter simplifies routine cleaning and maintenance
• Pre-installed on compatible Sammic rack conveyor machines for straightforward commissioning
• Helps protect kitchen staff comfort during continuous service periods
• Supports compliance with ventilation requirements in commercial kitchen environments

This unit is a manufacturer-matched component for Sammic rack conveyor dishwashers. It is not a universal accessory — correct fitment depends on the specific machine model, so it is worth confirming compatibility before ordering. Where a kitchen's ventilation infrastructure requires a different outlet configuration or higher extraction capacity, it is advisable to review the full specification against your canopy or duct system.

If you are unsure whether this unit is the right fit for your machine or your kitchen's ventilation setup, the team is happy to help you work through the details before you commit to an order.

These dosing accessories are designed for use with Sammic AX and UX series hood-type dishwashers. The range includes a peristaltic rinse aid doser, which is available as an optional upgrade for UX models that are supplied with a standard hydraulic rinse aid doser. Where both the detergent doser and the peristaltic rinse aid doser are fitted to a UX machine, chemical dosing can be monitored and adjusted directly from the dishwasher's control board, rather than relying on standalone inline dosing pumps.

In a busy warewashing environment, consistent and accurate chemical dosing matters. Too little detergent or rinse aid leads to rewashing, spotted glassware, and potential hygiene failures during service. Too much increases chemical spend unnecessarily. Having dosing integrated into the machine's controls gives the operator a single point of adjustment and removes some of the guesswork that comes with externally mounted dosers.

The peristaltic pump mechanism delivers more consistent flow than a basic hydraulic doser, which relies on water pressure to draw chemical. This tends to make dosing more reliable across varying water pressure conditions — a practical advantage in kitchens where supply pressure fluctuates.

These accessories are specific to the Sammic AX and UX hood dishwasher range and are not transferable to other makes or models. If you are unsure which dosing configuration your current machine is fitted with, or whether your model supports the peristaltic upgrade, it is worth checking before ordering.

If you would like to talk through which dosing setup is right for your machine, the team is happy to help you work it out.