Maytag Commercial Laundry

The Maytag MDE20MNTGW is a 10.5kg capacity vented tumble dryer built for commercial on-premise laundry use. It is a front-loading, electrically heated machine designed to handle continuous throughput in environments where reliability and ease of operation matter more than elaborate controls. The Turbovent system is a notable design feature that allows flexible venting arrangements, including longer duct runs, which can be useful where the machine cannot be sited directly against an external wall.

In practice, this dryer is well suited to low-to-medium volume laundry operations running regular daily loads. The four-roller drum suspension with permanently lubricated bearings keeps operation smooth and reduces mechanical wear over time, which matters in settings where the machine is in use most days. The porcelain enamel drum interior is durable and resists odour retention, which is a practical consideration for any site handling linen or workwear regularly.

From an operational standpoint, the key advantages this machine offers include:

• Flexible venting via the Turbovent system, accommodating longer or non-standard duct runs
• Simple, straightforward controls that require minimal operator training
• A large door opening that makes loading and unloading quicker during busy periods
• Robust drum suspension that supports consistent daily use without excessive maintenance
• Porcelain enamel interior that is easy to wipe down and resists staining

Installation requires a suitable vented exhaust route — this is not a condenser machine, so a duct to outside air is essential. The unit runs on a single-phase electrical supply and at 52.2kg it can be manoeuvred by two people, though access to the installation point should be considered before delivery. It is not suitable for stacking without the appropriate manufacturer-approved kit, and siting should allow reasonable clearance at the rear for the vent connection.

This model is a practical choice for guest houses, small hotels, care homes, beauty and therapy salons, or any site processing modest but regular laundry volumes. For operations with heavier or more continuous demands — such as larger hospitality sites or commercial linen services — a higher-capacity machine would likely be a better fit. Equally, if a vented exhaust is not feasible, a heat pump or condenser alternative may be worth considering.

If you are unsure whether this machine matches your site's volume or installation constraints, the team is happy to talk through the details with you before you commit.

The Maytag MAT23MNAGW is a top-loading commercial washing machine built around a traditional agitator-driven wash system. Unlike front-loading drum machines, the top-load design allows linen or garments to be added part-way through the cycle simply by lifting the lid — a practical advantage in busy environments where loads don't always come together at once.

The flex-vane agitator works across four distinct wash patterns, from a more vigorous action suited to heavily soiled items through to a gentler cycle for delicate fabrics. This range of motion provides thorough rollover of the load, which is important for consistent cleaning results across mixed laundry types. The deep water wash system ensures adequate saturation throughout the drum, and the PowerWash cycle is available for loads carrying stubborn soiling. The drive system is built around a quad-gear transmission, which contributes to consistent mechanical performance over extended use.

From an operational standpoint, the top-load configuration keeps servicing straightforward and the machine compact relative to its 10.5kg capacity. Practical benefits include:

• Mid-cycle loading without interrupting or restarting the programme
• Four agitation patterns to match wash intensity to fabric type
• Deep water wash for thorough saturation of bulky loads
• Steel construction supporting durability in regular commercial use
• Straightforward operation with low training overhead for laundry staff

Installation is relatively undemanding compared to many commercial laundry machines — the unit requires a standard electrical supply, hot and cold water connections, and a suitable drain outlet. At just under 74kg it can be positioned without specialist lifting equipment in most cases, though the footprint and access to connections should be confirmed before delivery. It is not designed for coin-operated or unattended public laundry use.

This machine is well suited to small hotels, guest houses, care homes, beauty and therapy businesses, and similar settings where laundry volumes are moderate and a reliable, easy-to-operate machine is needed without the complexity or footprint of a larger commercial front-loader. For sites with significantly higher daily throughput, a higher-capacity or harder-wearing commercial model may be a more appropriate long-term choice.

If you're unsure whether this machine suits your volume or setup, the team is happy to talk through the options with you before you commit.

The Maytag MDG28PRTGW is a front-loading gas vented tumble dryer built for commercial laundry environments where reliability and consistent throughput matter. With a 10.5kg rated commercial capacity, it sits in a practical mid-range position — substantial enough to handle steady daily loads in smaller hospitality or care settings, without the footprint of a full industrial machine. Gas heating offers faster heat-up times compared to equivalent electric models, which can make a meaningful difference when cycling through multiple loads across a shift.

In operational terms, this dryer performs well in environments with a predictable but moderate workload — think a small hotel, bed and breakfast, care home, or owner-operated laundrette where demand is consistent rather than relentless. The vented design means moisture is expelled externally, so installation requires access to an appropriate external vent outlet. Gas supply and a suitable flue connection will also need to be in place before installation; this is not a simply plug-in appliance, and a qualified engineer should handle the gas connection.

Practical points worth considering:

• Gas operation typically reduces running costs compared to electric drying at equivalent load sizes
• The large reversible door aids loading and unloading in tighter laundry rooms
• Front panel access simplifies routine maintenance and reduces engineer call-out time
• The steel construction with porcelain-enamel top resists the wear of continuous commercial use
• Vented rather than condenser — external ducting is a hard installation requirement

This model is best suited to smaller commercial operators who need a dependable workhorse for daily use rather than a high-throughput facility running back-to-back cycles under heavy industrial demand. If your site processes significantly higher volumes or requires continuous operation across long shifts, a higher-capacity commercial model may be more appropriate for your needs.

If you're unsure whether the capacity or gas specification is right for your site, our team is happy to talk through your requirements before you commit to a purchase.

The Maytag MLE22PRTGW is a ready-stacked washer and vented dryer combination supplied as a single integrated unit. Rather than pairing two separate machines, it brings the full wash and dry cycle into one compact column, making it a practical choice for professional sites where laundry demand is consistent but floor space is genuinely constrained.

In operational terms, the washer is built around Maytag's DuraCore Drive System, which is rated to withstand 15,000 cycles — a meaningful figure for sites running multiple loads per day across a working week. The high-speed extraction cycle reduces residual moisture before items transfer to the dryer, which in turn shortens drying time and keeps the overall turnaround per load manageable. The Turbovent drying system offers some flexibility in how the machine is vented, which is useful on sites where a straight external duct run isn't straightforward.

From a practical standpoint, the key advantages of this unit include:

• Full wash-and-dry capability within a single machine footprint
• High-speed extraction reducing carry-over moisture into the drying cycle
• DuraCore Drive rated for long-term heavy use with consistent cycle volumes
• Programmable controls to set cycles appropriate for different linen or workwear types
• Turbovent system offering installation flexibility where ducting is a practical challenge

Installation requires careful consideration. At 169kg, the unit will need adequate structural floor support, and the stacked height of 1880mm means ceiling clearance and access routes need to be checked before delivery is booked. This is a vented dryer, so a suitable external duct outlet is required — condensing installation is not an option with this model. Electrical and water connections will need to be in place and accessible at the intended location. Given the combined weight and height, it is worth confirming the installation route and final position before the machine arrives on site.

This unit is well suited to smaller professional operations — guesthouses, small hotels, care homes, staff uniform laundering in catering environments, or any site that processes a steady daily volume of linen or workwear but cannot accommodate two full-size machines side by side. For higher-volume operations processing large quantities continuously across long shifts, a heavier-duty dedicated washer and separate dryer arrangement is likely to serve better.

If you are unsure whether this unit matches your site's output requirements or installation constraints, our team is happy to talk it through before you commit to a purchase.

The Maytag MDE28PRTGW is a front-loading, electrically heated vented tumble dryer built for commercial laundry environments. It handles a 10.5kg load capacity and exhausts moisture through a vented outlet, making it suited to operations that run consecutive drying cycles through a shift rather than occasional domestic-style use.

In practice, this machine is well suited to sites where linen, towels, or workwear need to move through quickly and reliably. The four-roller drum suspension system and permanently lubricated bearings are designed to handle sustained daily operation without the mechanical wear issues that can affect lighter-duty machines pressed into commercial roles. The Turbovent system gives genuine flexibility when routing the exhaust, accommodating longer or more complex duct runs that would cause problems for standard venting arrangements — useful where the laundry room layout isn't straightforward.

Operationally, the practical benefits include:

• Large door opening makes loading and unloading quicker and easier during busy periods
• Simple controls reduce the chance of operator error across different staff members
• Turbovent system supports versatile exhaust routing for awkward room layouts
• Porcelain enamel drum interior is durable and resists staining from repeated use
• Steel construction with full-wrap console protects internal components from the knocks of a working environment

Installation requires a suitable electrical supply and a properly routed external vent exhaust — the room must have adequate ventilation, and the duct run should be planned before installation to avoid restricted airflow. At 67kg, the machine is manageable to position but will need appropriate access during delivery. It is designed for floor-standing installation and is not suitable for stacking without the correct manufacturer-approved kit.

This dryer is well suited to small hotels, guest houses, care homes, salons, and similar sites with a consistent but moderate daily laundry requirement. For higher-volume operations running multiple shifts or very large linen loads, a heavier-duty commercial machine with a larger drum capacity would be worth considering.

If you're unsure whether this model matches your site's throughput or installation setup, the team is happy to talk it through before you commit.

The Maytag MHN33PRTGW is a front-loading commercial washing machine with a 10.5kg drum capacity, designed for sites that run laundry through consistently rather than occasionally. It sits within Maytag's commercial range, which is built around durability and straightforward operation rather than domestic-style features.

The drive system is rated to endure up to 15,000 cycles, which gives a reasonable indication of the engineering standard applied here. In practical terms, that translates to sustained reliability across multiple daily loads — the kind of throughput expected in guesthouses, small hotels, care homes, or staff uniform laundry in a catering or hospitality setting. Spin performance is consistent across cycles, which helps reduce drying times and keeps turnaround manageable during busy periods.

From an operational standpoint, a few things are worth noting:

• Intelligent controls allow individual cycle pricing to be configured, useful for vended or monitored laundry installations
• One-touch cycle selection keeps operation simple for staff with varying levels of familiarity
• The display shows pricing, cycle selection, and time remaining — helpful for both operators and end users
• Energy Star certification indicates the machine meets recognised efficiency standards, which matters when it's running multiple cycles daily
• Steel construction throughout supports longevity in a commercial environment

At 107kg, installation requires adequate floor loading and appropriate access for positioning. The machine is front-loading, so a clear service clearance at the front is needed. Standard electrical and water connections apply, but it is worth confirming supply requirements with a qualified installer before committing to a location.

The MHN33PRTGW is well suited to low-to-mid-volume commercial laundry use — think small accommodation providers, care facilities, or on-site uniform laundry for a catering operation. For sites with significantly higher daily throughput, a higher-capacity machine in the Maytag range may be a more practical fit.

If you're unsure whether this model suits your site's volume or installation setup, we're happy to talk it through before you commit to anything.