Vogue Stainless Steel Kitchen Shelf 1800mm
Product Description
This Vogue stainless steel wall shelf provides a straightforward, practical storage solution for commercial kitchens. At 1800mm wide, it offers a generous run of overhead storage space suitable for holding...
Specifications
- Capacity
- Takes up to 50kg
- Dimensions
- 1800(W) x 300(D)mm
- Material
- Stainless Steel
- Weight
- 13kg
Downloads
Product Description
This Vogue stainless steel wall shelf provides a straightforward, practical storage solution for commercial kitchens. At 1800mm wide, it offers a generous run of overhead storage space suitable for holding equipment, dry goods, and smaller items that need to be kept within reach of the preparation or service area. Brackets are included, and the shelf is finished in full stainless steel throughout.
In day-to-day kitchen use, a shelf of this width earns its place above prep benches, pass areas, or along back-of-house walls where bench space is at a premium. The 50kg load capacity is adequate for the typical mix of containers, small appliances, and dry store items a kitchen section might keep overhead. Sound-deadening pads on the underside help reduce the rattle and vibration that can otherwise be a nuisance in a busy service environment.
The practical advantages of stainless steel in a kitchen environment are well understood:
- Non-porous surface resists moisture, grease, and food debris
- Easy to wipe down during or after service
- Compatible with commercial cleaning products without surface damage
- Consistent with stainless prep benches and equipment for a uniform finish
- Sound-deadening pads reduce vibration noise during service
Installation requires wall fixings appropriate for your wall construction — solid masonry, studwork, and tiled walls each have different requirements, and the fixings used should be rated to comfortably handle the shelf weight plus load. At 1800mm, the shelf will need at least two fixing points and ideally three for stability under load. Consider the height at which it is mounted carefully: too high and it becomes impractical for frequent access; too low and it may obstruct workflow.
This shelf is well suited to smaller independent kitchens, cafés, and catering operations where a single long overhead shelf meets the storage requirement. Sites with significantly heavier storage demands, or where multiple shelf runs are needed at height, may find a heavier-duty shelving system with greater load ratings a more appropriate fit.
If you are unsure whether this shelf will work in your specific space or alongside your existing equipment layout, our team is happy to talk it through with you.
Key Features
- Full stainless steel construction rated to 50kg load capacity
- 1800mm wide shelf providing a generous overhead storage run
- Brackets included for straightforward wall mounting installation
- Sound-deadening pads on underside reduce vibration and rattle
- Non-porous stainless surface compatible with commercial cleaning products
Operational Benefits
- Keeps frequently used items accessible without consuming bench space
- Easy to wipe down quickly between or during busy service periods
- Reduces kitchen clutter by utilising vertical wall space effectively
- Consistent stainless finish integrates with standard commercial kitchen equipment
- Sound-dampening pads help maintain a quieter working environment during service
Specifications
- Capacity
- Takes up to 50kg
- Dimensions
- 1800(W) x 300(D)mm
- Material
- Stainless Steel
- Weight
- 13kg
Downloads
Frequently Asked Questions
- For a single prep or pass section, 1800mm is a practical length that covers most standard bench runs. If you need storage across a longer wall or multiple work areas, it is worth considering whether a second shelf or a modular shelving system would serve you better — our team can advise based on your layout.
- Brackets are included, but the wall fixings themselves need to be appropriate for your wall type — masonry, studwork, and tiled surfaces all require different anchors and fixings. At 1800mm, we would recommend a minimum of three fixing points to ensure stability, particularly if the shelf will be loaded close to its 50kg capacity. A qualified installer should assess the wall structure before fitting.
- The 50kg capacity is reasonable for a mix of lighter items such as containers, dry goods, and small equipment, but it is not intended for heavy plant or large appliances. If you need to store significantly heavier loads overhead, a heavier-duty wall-mounted shelving system with a higher rated capacity would be the safer and more appropriate choice.