Bonzer Plastic Lid Dispenser 450mm In-Counter - 79-90mm
Product Description
The Bonzer Plastic Lid Dispenser is a practical in-counter storage solution for disposable cup lids with a diameter of 79 to 90mm. Fitted into the counter surface rather than mounted...
Specifications
Downloads
Product Description
The Bonzer Plastic Lid Dispenser is a practical in-counter storage solution for disposable cup lids with a diameter of 79 to 90mm. Fitted into the counter surface rather than mounted above it, it keeps lids stored upright within the tube, dispensing them upward via an elevator mechanism for one-at-a-time access at the point of service.
In busy beverage service environments — cafés, coffee shops, quick-service counters and similar operations — having lids stored cleanly and within easy reach directly affects the speed and consistency of service. This dispenser keeps the counter clear, reduces the handling of loose lids, and limits unnecessary consumption by dispensing individually rather than leaving a stack exposed on the surface.
The plastic construction makes it a cost-effective option where multiple dispensers are needed across a counter run, without the outlay of stainless steel alternatives. It is well suited to sites where the primary requirement is clean, functional lid storage rather than a heavy-duty fabricated finish.
- Keeps lids hygienically enclosed and protected from contamination
- Elevator mechanism supports quick, controlled single-lid dispensing
- In-counter fitting keeps the counter surface clear during service
- Helps reduce lid wastage compared to open stack dispensing
- Straightforward to install into a cut counter surface
Installation requires a 120mm cut-out in the counter surface. It is worth confirming your counter material and thickness before ordering, as this affects both the installation process and the fit of the front ring. If you are fitting multiple dispensers into a single counter run or are unsure which lid size matches your cups, the team are happy to help work through the requirements before you order.
Key Features
- Elevator mechanism dispenses lids one at a time from below
- Fits into a 120mm counter cut-out with 153mm front ring
- 450mm plastic tube houses a full column of 79-90mm lids
- Fully enclosed tube keeps stored lids protected from contamination
- Plastic construction provides a cost-effective multi-unit option
Operational Benefits
- Speeds up service by keeping lids accessible directly at the counter
- Reduces lid wastage through controlled single-item dispensing
- Frees up counter surface area during busy service periods
- Supports hygiene by enclosing lids away from open counter exposure
- Lower unit cost makes outfitting a full counter run more practical
Specifications
Downloads
Frequently Asked Questions
- This dispenser is designed for lids with a diameter of between 79 and 90mm. The most reliable way to check is to measure the rim diameter of your lid directly — manufacturer cup sizing can vary, so it is worth confirming before ordering rather than relying on cup size descriptions alone.
- The dispenser drops into a 120mm cut-out in the counter surface, secured by the 153mm front ring that sits flush on top. You will need to confirm that your counter material is suitable for cutting and that the counter depth accommodates the 450mm tube length below the surface.
- The plastic dispenser performs well in most café and beverage service environments where reliable lid storage is the main requirement. For sites with very heavy throughput or where a more robust fabricated finish is needed to match stainless steel counter equipment, a stainless steel version may be worth considering.