Franke Sissons 430mm Round Inset Sink Bowl Rimmed Edge
Product Description
This Franke Sissons round inset sink bowl is a straightforward, no-frills sink solution designed to drop into a prepared worktop cutout. At 430mm diameter, it offers a practical wash or...
Specifications
- Diameter
- 380
- Dimensions
- 160(H) x 380(Ø)mm
- External material
- Satin
- Finish
- Stain Polish
Downloads
Product Description
This Franke Sissons round inset sink bowl is a straightforward, no-frills sink solution designed to drop into a prepared worktop cutout. At 430mm diameter, it offers a practical wash or prep bowl footprint for commercial kitchen environments where space is managed carefully. The rimmed edge seats flush against the worktop surface, creating a clean, sealed finish that keeps water where it belongs.
Constructed from 304-grade stainless steel with a satin polish finish, the bowl is well suited to the demands of a busy kitchen environment. 304 stainless is the standard material choice in commercial catering for good reason — it resists corrosion, tolerates regular exposure to cleaning chemicals, and holds up under sustained daily use without deteriorating. At 1.2mm gauge, the bowl has enough rigidity to avoid flex under normal working conditions.
Practically speaking, this type of inset bowl is commonly used in prep areas, bar counters, serveries, and secondary wash stations rather than as a primary pot-wash or high-volume dishwash position. It works well where a compact, dedicated rinse or prep point is needed without committing to a full sink run.
- Rimmed edge design gives a neat, professional worktop finish
- Supplied with waste plug, chain, and overflow — ready to connect
- Satin polish finish is straightforward to wipe down and maintain
- 304 stainless construction handles standard commercial cleaning products
Installation requires a correctly sized worktop cutout and appropriate plumbing connections for waste and overflow. The bowl is not designed for surface mounting — it is an inset product only. Worktop thickness and material should be considered before cutting, and plumbing access beneath the counter is a practical requirement.
This bowl is a sensible choice for operators fitting out bar areas, small prep stations, or ancillary wash points. For higher-volume or more demanding applications, a larger or deeper bowl configuration may be worth considering. If you are fitting multiple bowls or specifying a run of sinks across a kitchen, it is worth talking through the layout before ordering.
Key Features
- 430mm diameter inset bowl with rimmed edge for flush worktop fitting
- Manufactured from 1.2mm thick 304-grade stainless steel throughout
- Satin polish finish resists marking and supports routine cleaning
- Supplied complete with waste plug, chain, and overflow fitting
- Round bowl profile suited to compact prep and ancillary wash points
Operational Benefits
- Flush rimmed fit keeps the worktop surface clean and water-tight
- 304 stainless construction withstands daily commercial chemical cleaning
- Compact 430mm footprint makes efficient use of limited counter space
- Supplied with waste fittings, reducing the need for separate accessories
- Satin finish is quick to wipe down, supporting kitchen hygiene standards
Specifications
- Diameter
- 380
- Dimensions
- 160(H) x 380(Ø)mm
- External material
- Satin
- Finish
- Stain Polish
- Material
- Stainless steel 304
- Warranty
- 2 Years
- Weight
- 1.7kg
Downloads
Frequently Asked Questions
- This bowl is better suited to secondary or ancillary positions — bar areas, prep counters, or supplementary rinse points. For a primary wash station handling significant volumes of crockery or cookware, a larger or deeper bowl configuration would be more practical.
- The bowl requires a correctly sized cutout in the worktop surface, with adequate plumbing access beneath for waste and overflow connections. It is designed for inset fitting only and is not suitable for surface mounting. Worktop material and thickness should be assessed before cutting to ensure a secure, sealed fit.
- 304-grade stainless steel is the standard material specification across commercial catering environments and performs reliably with the cleaning chemicals typically used in kitchens. Avoiding prolonged contact with high-chloride or highly acidic cleaners will help maintain the finish over time, as it would with any stainless steel sink.