Kubus KMDF4HT Drop-In Self-Service Multideck 1525mm
Product Description
The Kubus KMDF4HT is a drop-in refrigerated self-service multideck designed to sit within a countertop or servery installation. At 1525mm wide, it provides a substantial chilled display across three adjustable...
Specifications
- Capacity
- 4 x 1/1 GN
- Colour
- Silver
- Dimensions
- 775(H) x 1525(W) x 660(D)mm
- Dimensions internal
- 898(H) x 1480(W) x 552(D)mm
Downloads
Product Description
The Kubus KMDF4HT is a drop-in refrigerated self-service multideck designed to sit within a countertop or servery installation. At 1525mm wide, it provides a substantial chilled display across three adjustable glass shelves and a chilled GN well beneath — giving operators both an eye-level display and a lower-level storage and merchandising area in a single footprint. It is intended for customer-facing self-service environments where chilled food or drink needs to be presented, maintained at temperature, and accessed without staff intervention.
The unit uses an R290 hydrocarbon refrigerant system, which runs efficiently under sustained operation and carries a lower global warming potential than older refrigerant types — a consideration for operators working toward environmental compliance targets or energy cost management. The underslung condensing unit is designed to be accommodated within the counter cabinetry below, with ventilation handled via the air grills supplied. There is no requirement for site drainage, as condensate is managed by an integral evaporator. The unit operates on a standard 13A plug connection, which simplifies installation in most settings.
From an operational standpoint, the display is built for continuous service. Practical features that support day-to-day use include:
- Three height- and angle-adjustable chilled glass shelves with product stops and ticket strips on each front edge
- Digital temperature display and lockable control panel positioned at eye level on the customer-facing gantry
- Diffused gantry lighting for clear product illumination without glare
- Modular removable deck plates to simplify routine cleaning
- Toughened glass sneeze screen and side panels for hygiene protection
Installation requires careful consideration of the counter void depth and height to accommodate the underslung refrigeration unit, along with adequate airflow to the front inlet grills and rear vent. At 200kg, the unit is substantial, and the receiving counter structure must be built to support that load. A lifting kit is supplied. The noise level sits at around 70dB in operation, which is worth factoring into the environment — quieter than most extraction systems, but audible in a calm retail or hospitality setting.
This unit is well suited to cafés, workplace canteens, hospital retail areas, farm shops, and similar self-service environments where customers select chilled products directly. It is sized for a moderately busy service point rather than a high-volume supermarket run. For sites requiring a wider display or higher product throughput, larger-format alternatives are available in the range.
If you are planning a new servery counter or refitting an existing one, it is worth discussing the installation specifics before ordering — our team can help confirm whether the configuration will work for your counter dimensions and service requirements.
Key Features
- Drop-in design with underslung condensing unit for counter installation
- Three adjustable chilled glass shelves with ticket strips on each edge
- R290 hydrocarbon refrigerant system for efficient, low-impact operation
- Integral condensate evaporator eliminates the need for site drainage
- Lockable digital temperature control panel positioned at customer eye level
Operational Benefits
- Keeps chilled products consistently on temperature throughout service hours
- Adjustable shelf angles let operators maximise product visibility and access
- Plug-in connection simplifies installation without specialist electrical work
- Removable deck plates reduce cleaning time and support hygiene compliance
- Self-service layout reduces staff involvement and supports faster customer throughput
Specifications
- Capacity
- 4 x 1/1 GN
- Colour
- Silver
- Dimensions
- 775(H) x 1525(W) x 660(D)mm
- Dimensions internal
- 898(H) x 1480(W) x 552(D)mm
- External material
- Stainless Steel
- Feet
- Feet
- Finish
- Stainless Steel
- Fridge finish
- Stainless Steel
- Fridge function
- Refrigerator
- Fuel type
- Refrigerator
- Gn size
- 1/1 GN full
- Material
- Stainless Steel & Aluminium
- Noise level
- 70.7
- Power
- 1.73kW, 230V, 13A
- Refrigerant
- R290 / 500g
- Temperature range
- '-1°C to 5°C
- Warranty
- 1 Year
- Weight
- 200kg
Downloads
Frequently Asked Questions
- The KMDF4HT is designed to drop into a countertop with the condensing unit mounted beneath, so the counter void needs to be deep and tall enough to house that unit with room for airflow. Ventilation is handled through the supplied air inlet grills at the front and a rear vent, so the counter design must allow those to remain unobstructed. We would always recommend confirming your counter dimensions with us before ordering to avoid complications on site.
- It is well matched to moderate-volume self-service settings such as workplace canteens, café serveries, and food retail counters where customers are selecting individual chilled items. For very high-footfall environments with rapid product turnover, a wider or higher-capacity display unit may serve better — it is worth discussing your expected service volumes with us so we can confirm the right fit.
- The unit features a digital temperature display built into the gantry at customer eye level, alongside a control panel that can be locked to prevent unauthorised adjustment — useful in self-service areas where the controls are accessible to the public. The system holds food core temperature between -1°C and 5°C under normal operating conditions.