San Jamar L2200C In-Counter Lid Dispenser - 70–95mm
Product Description
The San Jamar L2200C is an in-counter lid dispenser designed to sit flush within a beverage counter surface, dispensing cold-drink lids one at a time through an EZ-Fit mechanism. It...
Specifications
- Extra information
- Cut Out: 146mm, Tube Length: 603mm
Downloads
EZFitLidDispenser Spec SheetProduct Description
The San Jamar L2200C is an in-counter lid dispenser designed to sit flush within a beverage counter surface, dispensing cold-drink lids one at a time through an EZ-Fit mechanism. It is intended for operations where lids are handed out at point of service — coffee shops, quick-service restaurants, cafeterias, and similar high-footfall beverage stations. The dispenser accommodates a range of cold-beverage lid sizes within the 70–95mm diameter bracket, removing the need to swap out units when lid sizing varies across a menu.
In a busy service environment, loose lid stacks are a persistent hygiene and waste problem. The L2200C addresses this directly by keeping the lid supply enclosed within the counter, away from handling, spillage, and airborne contamination. The front-loading design allows staff to reload one-handed without disrupting the service line, which matters during peak periods when counter space and attention are both limited.
- One-at-a-time dispensing reduces lid waste and accidental contamination
- Front-loading reload requires one hand, keeping service flowing during busy periods
- Enclosed tube design protects lid stock from counter spillage and handling
- High-impact plastic construction resists cracking under daily commercial use
- No adjustment mechanism — minimal moving parts means less to go wrong
Installation requires a counter cut-out of 124mm diameter and sufficient counter depth to accommodate the tube below the surface. It is worth confirming counter thickness and underside clearance before ordering, as the tube length determines how much depth is needed beneath the worktop. The unit is not suitable for hot-drink lids or for surface mounting — it is designed specifically for flush in-counter installation.
This dispenser is well suited to cafés, canteens, and quick-service operations running cold-drink programmes with consistent lid sizing in the 70–95mm range. For operations dispensing multiple lid sizes across a wider diameter range, or running very high volumes, it is worth considering whether a multi-aperture or higher-capacity solution would be more practical.
If you are unsure whether this unit fits your counter specification or lid range, the team is happy to talk it through before you commit to an order.
Key Features
- EZ-Fit mechanism dispenses cold-drink lids one at a time cleanly
- Accommodates cold-beverage lids across the 70–95mm diameter range
- Front-loading design allows one-handed reload without tools or adjustment
- Requires a 124mm diameter counter cut-out for flush installation
- High-impact plastic body with black trim rings resists cracking under daily use
Operational Benefits
- Reduces lid waste by preventing loose stacks on the service counter
- Enclosed storage protects lid stock from spillage and airborne contamination
- One-handed reload keeps the service line moving during peak demand
- No adjustment parts means less routine maintenance for busy kitchen teams
- Flush counter fit keeps the beverage station tidy and operationally efficient
Specifications
- Extra information
- Cut Out: 146mm, Tube Length: 603mm
Downloads
EZFitLidDispenser Spec SheetFrequently Asked Questions
- The L2200C is designed for cold-beverage lids in the 70–95mm diameter range, which typically covers cups from around 8oz to 24oz depending on the cup manufacturer. Lid sizing is not perfectly standardised across brands, so it is worth checking your actual lid dimensions against that range before ordering — a small variance can affect dispensing reliability.
- You will need to cut a 124mm diameter aperture in the counter surface and ensure there is sufficient clearance beneath the worktop to accommodate the full tube length. The unit is designed for flush in-counter installation only and is not suitable for surface mounting, so confirming your counter depth and underside access beforehand is important.
- The L2200C suits moderate- to high-volume beverage stations where lids are dispensed consistently throughout service. For very high-volume sites dispensing across multiple lid sizes simultaneously, a multi-aperture or larger-capacity dispenser may be a more practical choice — it is worth discussing your throughput requirements with the team if you are unsure.