Lincat L4 Fume Filtration Unit | Recirculating Extraction Canopy
Product Description
The Lincat L4 is a recirculating fume filtration canopy designed for smaller commercial kitchens where running a duct to an outside wall or roof is not feasible. Rather than expelling...
Specifications
- External depth (mm)
- 610
- External height (mm)
- 545
- External width (mm)
- 1295
- Power rating (kw)
- 0.5
Product Description
The Lincat L4 is a recirculating fume filtration canopy designed for smaller commercial kitchens where running a duct to an outside wall or roof is not feasible. Rather than expelling cooking fumes externally, the unit draws air through an internal filter system, cleans it, and returns it back into the kitchen through the top rear of the canopy. For sites where structural constraints, listed building restrictions, or landlord limitations rule out conventional ducted extraction, this type of unit offers a practical alternative.
In a working kitchen context, the L4 is best matched to light-intensity electric cooking — countertop equipment in a small café, snack bar, hotel prep area, or hospitality suite where fume and grease output is modest and predictable. It is not built to handle the sustained, heavy fume loads generated by high-output fryers, griddles, or large ranges running hard through a busy service. Being realistic about the cooking volume this unit will manage is important before purchasing.
Key operational points to consider:
- Recirculating design — no external duct run or structural penetration required
- Filters are accessible for routine removal and cleaning
- Not compatible with gas cooking equipment under any circumstances
- Better suited to light-duty, lower-volume cooking operations
- Filter maintenance is an ongoing requirement to sustain performance and limit fire risk
Because air is recirculated rather than expelled, filter condition directly affects how well the unit performs. Grease accumulates over time, so a regular cleaning routine is essential — not just for hygiene, but for safety. Easy filter access makes this a manageable part of day-to-day kitchen maintenance rather than a specialist job.
If your operation is gas-based, growing rapidly, or already running at significant output, a ducted extraction solution or a higher-capacity canopy is likely to be more appropriate. If you would like to talk through whether the L4 suits your kitchen setup before committing, the team is here to help.
Key Features
- Recirculating filtration system requires no external duct installation
- Internal filter system captures grease and cooking fumes before recirculation
- Filtered air returned cleanly through the top rear of the canopy
- Accessible filter design supports routine removal and in-house cleaning
- Designed for use with electric cooking appliances only
Operational Benefits
- Provides a workable extraction solution where external ducting is not possible
- Avoids structural alterations, reducing installation cost and disruption
- Helps maintain a cleaner kitchen atmosphere during light cooking operations
- Routine filter access keeps ongoing maintenance straightforward for kitchen staff
- Suits operators in leased or restricted premises where duct routes are unavailable
Specifications
- External depth (mm)
- 610
- External height (mm)
- 545
- External width (mm)
- 1295
- Power rating (kw)
- 0.5
- Power type
- Electric 1 Phase
- Weight (kg)
- 35
Downloads
Lincat Fume Filtration SpecificationsLincat Fume Filtration Brochure
Lincat Fume Filtration Manual
Frequently Asked Questions
- No — the L4 is not compatible with gas appliances under any circumstances. It is designed solely for use above electric cooking equipment. If your kitchen runs gas, a fully ducted extraction canopy connected to an external flue is required.
- Filter cleaning frequency depends on how intensively the unit is used, but for any regular cooking operation it should be part of a routine maintenance schedule. Grease accumulates within the filter media over time, which reduces extraction effectiveness and increases fire risk if left unaddressed. The filters are designed to be accessible, making removal and cleaning a manageable in-house task rather than a specialist intervention.
- The L4 works well in smaller kitchens running light electric cooking — a café, snack bar, hospitality prep area, or similar environment where cooking output is modest and consistent. It is not designed for high-volume production kitchens or operations using high-output equipment such as commercial fryers or griddles running at sustained capacity. If your cooking demands are heavier or likely to grow, a higher-capacity or fully ducted solution would be worth exploring.