Maidaid D502 500mm Undercounter Glasswasher with Drain Pump

Product No: D502/13amp

Product Description

The Maidaid D502 is a 500mm undercounter glasswasher designed for commercial bar and hospitality environments where consistent glass hygiene and reliable throughput matter throughout service. It sits neatly beneath a bar counter and connects to a mains water supply, with an onboard drain pump handling waste removal — so the machine is not dependent on a drain point positioned conveniently below the unit.

In service, the D502 performs well across small to medium-volume operations. Three selectable wash programmes, including a dedicated renovation setting for dulled glassware, allow operators to match the cycle to the load rather than running everything at maximum resource. The thermo-stop system holds the wash at the correct temperature before releasing, supporting consistent hygiene results cycle to cycle. An automatic self-clean function helps maintain the machine between service periods without requiring manual intervention.

From an operational standpoint, a few features are worth highlighting:

  • Onboard drain pump removes reliance on gravity drainage, widening installation options
  • Traffic light LED display gives clear at-a-glance cycle progress without reading a screen
  • Energy saving mode reduces running costs during quieter periods
  • Chemical dosing fitted as standard — no separate installation required
  • Double-skinned construction helps retain heat and reduces external surface temperature

Installation requires a mains water supply, a suitable electrical connection, and a waste outlet. The unit carries WRAS approval, which is relevant on sites where water fittings compliance is a requirement. As with any glasswasher, adequate ventilation around the unit is worth planning for, and access to the interior for routine cleaning and descaling should factor into how it is positioned beneath the counter.

The D502 is well suited to pubs, bars, small hotels, and event venues running moderate glass volumes through a single service point. It is not designed for high-volume operations washing several hundred covers per session — those environments would be better served by a higher-capacity machine with a faster cycle or larger basket. Equally, for very low-volume sites where a drain pump is unnecessary, a simpler model may represent better value.

If you are weighing up whether the D502 suits your service volume or installation layout, the team is glad to help you think it through.

Key Features

  • Onboard drain pump supports flexible installation without gravity drainage
  • Three selectable wash programmes including glass renovation cycle
  • Thermo-stop system ensures correct wash temperature before cycle releases
  • WRAS-approved water fittings for compliance on regulated sites
  • Automatic self-clean cycle maintains machine hygiene between service periods

Operational Benefits

  • Widens installation options where drain points are awkwardly positioned
  • Matches wash intensity to load, reducing water and chemical consumption
  • Delivers consistent hygiene results through temperature-controlled cycle completion
  • Energy saving mode keeps running costs lower during quieter trading periods
  • Reduces intervention time with automated self-cleaning between services

Specifications

Basket size
500
Cycle time
90-150 seconds
External depth (mm)
600
External height (mm)
710
External width (mm)
600
Power type
13amp Plug|Single Phase Hardwired|3 Phase Hardwired
Wash chamber height
260

Frequently Asked Questions

Regular price £2,724.00 exc. VAT £3,268.80 inc. VAT
Stock due by (approx)

Choose Your Options

  • Equipment may be supplied with a moulded plug but may be more suitably connected to a fused spur
  • In the event of equipment failure an engineer will be sent for an onsite repair
  • In the event of equipment failure any parts needed will be provided
  • Equipment that should be connected to a suitably rated outlet - must be installed by a competent person
  • Equipment can be connected to a single phase power supply – must be installed by a competent person
  • Equipment can be connected to a three phase power supply – must be installed by a competent person