Classeq BWS400 Warewasher Stand for G400 & D400 Series
Product Description
The Classeq BWS400 is a steel coated stand designed specifically to support the G400, G400 Duo, D400, and D400 Duo warewashers. It provides a stable, raised base that brings the...
Specifications
- Colour
- Silver
- Dimensions
- 400(H) x 490(W) x 490(D)mm
- Weight
- 4kg
Downloads
Product Description
The Classeq BWS400 is a steel coated stand designed specifically to support the G400, G400 Duo, D400, and D400 Duo warewashers. It provides a stable, raised base that brings the machine to a practical working height, reducing operator strain during loading and unloading and helping to keep workflow moving during service.
One of its more useful practical features is that the stand can be cut down to suit your specific installation height. This matters in real kitchens where floor levels, pass heights, and adjacent countertop runs rarely conform to a standard. Having that flexibility avoids the common problem of a machine sitting too high or too low relative to the surrounding prep area.
From an operational standpoint, benefits include:
- Raises the warewasher to a comfortable working height, reducing operator fatigue
- Compatible across the G400 and D400 range, including Duo variants
- Height can be trimmed on-site to match your specific installation
- Steel coated construction suited to the damp, demanding environment of a wash-up area
- Lightweight enough to handle and position without specialist equipment
Installation is straightforward, but it is worth confirming the finished height before cutting — particularly where the machine needs to align with an existing countertop or drainage run. Once cut, the adjustment is permanent, so taking accurate measurements beforehand is strongly advised.
This stand is well suited to any kitchen already running a Classeq G400 or D400 machine where a dedicated base is needed. If you are unsure whether this fits your specific model configuration or installation setup, our team is happy to talk it through with you before you order.
Key Features
- Compatible with G400, G400 Duo, D400, and D400 Duo warewashers
- Steel coated construction suited to wet wash-up environments
- Height-adjustable by cutting down to suit installation requirements
- Lightweight at 4kg, easy to position during installation
- Compact 490 x 490mm footprint matches the G400 and D400 base
Operational Benefits
- Raises machine to working height, reducing operator strain during service
- Flexible height adjustment avoids costly installation workarounds on-site
- Purpose-built fit eliminates compatibility guesswork with supported models
- Durable coating withstands the damp, high-use conditions of a wash-up area
- Simple installation keeps setup time and associated labour costs low
Specifications
- Colour
- Silver
- Dimensions
- 400(H) x 490(W) x 490(D)mm
- Weight
- 4kg
Downloads
Frequently Asked Questions
- The BWS400 stand is designed specifically for the Classeq G400, G400 Duo, D400, and D400 Duo warewashers. If you are running a different model in the Classeq range, it is worth checking compatibility before ordering as the footprint and fixing points may differ.
- Yes — the legs can be cut down to achieve a lower finished height than the standard 400mm. This is particularly useful where the machine needs to sit flush with an adjacent counter or where ceiling clearance is a factor. The cut is permanent, so it is important to measure carefully and confirm your required height before trimming.
- The stand itself is a supporting structure rather than a performance component, so its suitability is largely determined by which warewasher you are pairing it with. For very high-volume sites running extended service periods, it is worth reviewing whether the G400 or D400 series machine has sufficient throughput capacity for your needs — our team can advise on that alongside the stand if helpful.