Instanta WMS10 10 Litre Wall Mounted Auto-Fill Water Boiler
Product Description
The Instanta WMS10 is a wall-mounted, mains-fed water boiler with a 10-litre capacity. It connects directly to the cold water supply and refills automatically, maintaining a consistent supply of hot...
Specifications
- Capacity (litres)
- 10
- Country of origin
- UK
- External depth (mm)
- 247
- External height (mm)
- 480
Downloads
wms10 specification sheetProduct Description
The Instanta WMS10 is a wall-mounted, mains-fed water boiler with a 10-litre capacity. It connects directly to the cold water supply and refills automatically, maintaining a consistent supply of hot water throughout the day without any manual filling or monitoring from staff.
In practice, this kind of unit earns its place in steady-demand environments — a café, tearoom, hotel breakfast service, or staff canteen where hot water is needed reliably across the day but peak throughput is moderate rather than heavy. Because the boiler sits on the wall, it leaves worktop and floor space clear, which matters in compact servery areas where every surface tends to be in use. The auto-fill mechanism means staff are not drawn away from service to check levels or wait on a manual boil cycle.
Operational advantages worth noting:
- Auto-fill operation removes manual water management during service
- Wall-mounted design keeps worktop and floor space free
- Non-drip tap reduces spillage and supports a tidy workspace
- Stainless steel construction is robust and easy to wipe down
- Compact form suits smaller kitchens and servery counters
Installation requires a mains cold water connection and an appropriate electrical supply. The WMS10 is typically hardwired rather than plug-in, so if a suitable fused spur is not already in position, an electrician will need to be involved. Wall fixing should account for the weight of the unit when full, and it is worth confirming the mounting position gives clear access to the tap and any service points before the unit goes up.
The WMS10 is well suited to small-to-medium operations with moderate, consistent hot water demand. For higher-volume sites or locations needing multiple draw-off points simultaneously, a larger-capacity unit would be a more appropriate fit. Equally, for very low-volume use, a smaller model may offer a more economical solution.
If you would like to talk through whether this capacity and configuration suits your setup, the team is glad to help before you place an order.
Key Features
- 10-litre capacity with direct mains auto-fill for continuous operation
- Wall-mounted design frees up worktop and floor space
- Non-drip tap fitting minimises spillage at the point of use
- Stainless steel body designed for durability in daily commercial use
- Single-tap draw-off suited to steady, moderate-volume hot water demand
Operational Benefits
- Staff always have access to hot water without monitoring boiler levels
- Frees up counter space in compact servery and kitchen areas
- Reduces service interruptions caused by manual filling or re-boiling
- Straightforward to clean down, supporting daily hygiene routines
- Reliable auto-fill keeps output consistent throughout a full service
Specifications
- Capacity (litres)
- 10
- Country of origin
- UK
- External depth (mm)
- 247
- External height (mm)
- 480
- External width (mm)
- 340
- Extra information
- WRAS approved
- Heat-up time
- 30 mins
- Machine output
- 27 Litres per hour
- Material
- 304 grade Stainless Steel (Mirror polish)
- Power rating (kw)
- 3
- Power type
- 13amp Plug
- Rapid draw-off ltr
- 10
- Tap protrusion
- 85
- Temperature range (deg c)
- 96
- Weight (kg)
- 9.7
Downloads
wms10 specification sheetFrequently Asked Questions
- The WMS10 is well matched to environments with steady, moderate hot water demand — think a small café, tearoom, or staff canteen serving hot drinks and light food preparation across the day. If your operation runs high-volume back-to-back service or needs to supply multiple points simultaneously, it would be worth discussing a higher-capacity unit with us to make sure output keeps pace.
- The WMS10 requires both a mains cold water connection and a dedicated electrical supply. It is typically hardwired rather than simply plugged into a socket, so if a suitable fused spur is not already in place, you will need a qualified electrician to install one. Wall fixing also needs to be secure enough to bear the weight of the unit when full, so the mounting position and substrate should be assessed before installation.
- Like any water boiler in commercial use, the WMS10 will require periodic descaling — particularly in hard water areas where scale build-up can affect both efficiency and output temperature. Instanta units are generally straightforward to maintain, and fitting an inline scale filter at the water inlet can extend service intervals considerably. We can advise on suitable filtration options if you are in a hard water region.