San Jamar C4200PF Pull-Type Foam Cup Dispenser 4–10oz SS
Product Description
The San Jamar C4200PF is a wall-mounted, pull-type cup dispenser constructed from high-impact stainless steel and designed to hold foam beverage cups in the 4 to 10oz range. It is...
Specifications
- External height (mm)
- 597
- Extra information
- Cup Size - 4-10oz/120-300ml
Downloads
Product Description
The San Jamar C4200PF is a wall-mounted, pull-type cup dispenser constructed from high-impact stainless steel and designed to hold foam beverage cups in the 4 to 10oz range. It is a straightforward piece of front-of-house or self-service kit — cups are loaded from the top and dispensed individually by pulling from the base, keeping the stack clean and accessible throughout service.
In a busy café, canteen, or beverage station, this type of dispenser earns its place by keeping cups organised, hygienic, and within easy reach without occupying counter space. The self-adjusting mechanism accommodates the range of foam cup sizes without requiring separate sizing rings, which is useful where a site uses more than one cup format across hot and cold drinks. The stainless steel construction is durable enough for frequent daily use and straightforward to wipe down as part of a routine hygiene check.
- Top-loading gravity-fed design with protective cap keeps cups clean between refills
- Self-adjusting sleeve fits foam cups across the 4–10oz range without adaptors
- Wall or cooler-mounted to free up counter space at busy service points
- Stainless steel tube resists impact and cleans down easily
- Removable cap allows quick, hygienic refilling during service
Installation is straightforward — the unit fixes to most wall surfaces or cooler sides using standard fixings, making it suitable for countertop beverage stations, self-service areas, or staff refreshment points. No electrical or plumbing connections are required. It is worth confirming that your foam cup stock falls within the 70–85mm rim diameter range before purchasing, as the dispenser is sized for that profile.
This dispenser suits cafés, canteens, healthcare catering, convenience stores, and any site running a self-service hot or cold drinks station with moderate to high cup throughput. If you're fitting out a larger or higher-volume station and need to consider multiple dispensers or a different mounting configuration, the team are happy to help you work out what suits the space.
Key Features
- Self-adjusting sleeve holds foam cups across the 4–10oz range
- High-impact stainless steel tube for durability under daily use
- Top-loading gravity-fed design with removable protective cap
- Mounts to most wall surfaces or cooler sides with standard fixings
- Suits foam cups with a 70–85mm rim diameter without adaptors
Operational Benefits
- Keeps cups hygienic and dust-free between refills during service
- Frees up counter space at busy self-service beverage stations
- Eliminates sizing ring swaps when using multiple foam cup formats
- Quick top-up refilling keeps service running without interruption
- Easy wipe-down construction supports routine hygiene compliance
Specifications
- External height (mm)
- 597
- Extra information
- Cup Size - 4-10oz/120-300ml
Downloads
Frequently Asked Questions
- The dispenser is designed for foam cups in the 4 to 10oz range with a rim diameter of approximately 70–85mm. It's worth checking your cup stock against that rim dimension before ordering, as not all cups within that volume range will share the same rim profile.
- It attaches to most standard wall surfaces and the sides of cooler units using conventional fixings, making it suitable for countertop beverage stations, self-service areas, and staff refreshment points. No electrical or plumbing connection is required.
- For a single-format drinks point with moderate throughput, one unit is typically adequate. On busier self-service counters where multiple cup sizes are in use simultaneously, fitting more than one dispenser side by side is a practical approach — the team can advise on layouts if that's relevant to your setup.