Hatco DL-725-CL Decorative Heated Lamp product image

Hatco

Hatco DL-725-CL Decorative Heated Lamp for Food Servery

SKU: DL-725-CL

£319.00(£382.80 inc VAT)
Get a quote

Request a callback

Leave your details and we will call you back about Hatco DL-725-CL Decorative Heated Lamp for Food Servery.

Delivery Information

Price Match

  • In the event of equipment failure any parts needed will be provided 2
  • In the event of equipment failure an engineer will be sent for an onsite repair 2
  • Equipment may be supplied with a moulded plug but may be more suitably connected to a fused spur

The Hatco DL-725-CL is a decorative radiant heat lamp designed to keep plated or carved food warm at open servery counters, carvery stations, and front-of-house pickup points. It works through overhead radiant heat rather than enclosed holding, meaning food stays visible and accessible to staff and guests while being held briefly at temperature between preparation and service.

In busy service environments, this type of lamp performs a straightforward but operationally important role. It slows the rate at which food cools during plating, carving, and self-service — bridging the gap between kitchen output and the moment food reaches the guest. It is commonly used in hotel carvery and buffet settings, banqueting operations, and restaurant pass and pickup counters where presentation is as much a consideration as thermal performance.

A practical strength of the DL-725-CL is the breadth of configuration available across the Hatco range. The stock version is finished in glossy grey with a fixed cord drop of 1,168mm from ceiling rose to shade base. Non-stock options extend to seven powder-coated colours, seven gloss finishes, six plated finishes, nine shade styles, eight mounting arrangements, and four switch positions — which makes it considerably easier to match the lamp to an established front-of-house scheme rather than working around a single finish. Non-stock configurations carry an approximate six-week lead time, which is worth factoring into any fit-out or refurbishment programme.

  • Suitable for open servery counters, carvery stations, and plating pickup points
  • Slows heat loss during service without enclosing or obscuring the food
  • Wide choice of finishes and shade styles for front-of-house environments
  • Multiple mounting arrangements to suit different ceiling and gantry setups
  • Stock finish available for prompt supply; custom configurations available to order

It is worth being clear about what this lamp is and is not. It is not a substitute for a heated holding cabinet or drawer where food must be maintained at a safe core temperature for an extended period. Its role is short-term heat retention at the point of service. For operations with higher-volume or longer-duration holding requirements, enclosed or active holding equipment would be the more appropriate solution.

If you are working through which finish, cord drop, or mounting arrangement suits your servery layout — particularly within a specific décor scheme or a tight installation window — we are happy to talk it through before anything is ordered.

Frequently asked questions

Is this lamp suitable for holding food at temperature for extended periods?

The DL-725-CL is designed for short-term heat retention at the point of service — slowing the rate at which food cools during carving, plating, and self-service rather than maintaining a precise core temperature over time. For operations that need to hold food safely for longer durations, a heated holding cabinet or drawer would be the more appropriate solution.

What are the installation requirements for the DL-725-CL?

The lamp is ceiling-mounted and connects via a cord drop, so a suitable ceiling or overhead gantry fixing point is required above the servery position. The standard stock version has a fixed cord drop of 1,168mm from ceiling rose to shade base — if your installation requires a different drop length or mounting arrangement, that can be specified as a non-stock configuration, though this will add approximately six weeks to lead time.

How much customisation is available, and does it affect lead time?

The stock version ships in glossy grey and is available for prompt supply. Non-stock options cover seven powder-coated colours, seven gloss finishes, six plated finishes, nine shade styles, eight mounting arrangements, and four switch positions. Custom configurations carry an approximate six-week lead time, so it is worth confirming your specification early if you are working to a fixed refurbishment or opening date.
Hatco DL-725-CL Decorative Heated Lamp for Food Servery

£319.00(£382.80 inc VAT)

£319.00(£382.80 inc VAT)

The Hatco DL-725-CL is a decorative radiant heat lamp designed to keep plated or carved food warm at open servery counters, carvery stations, and front-of-house pickup points. It works through overhead radiant heat rather than enclosed holding, meaning food stays visible and accessible to staff and guests while being held briefly at temperature between preparation and service.

In busy service environments, this type of lamp performs a straightforward but operationally important role. It slows the rate at which food cools during plating, carving, and self-service — bridging the gap between kitchen output and the moment food reaches the guest. It is commonly used in hotel carvery and buffet settings, banqueting operations, and restaurant pass and pickup counters where presentation is as much a consideration as thermal performance.

A practical strength of the DL-725-CL is the breadth of configuration available across the Hatco range. The stock version is finished in glossy grey with a fixed cord drop of 1,168mm from ceiling rose to shade base. Non-stock options extend to seven powder-coated colours, seven gloss finishes, six plated finishes, nine shade styles, eight mounting arrangements, and four switch positions — which makes it considerably easier to match the lamp to an established front-of-house scheme rather than working around a single finish. Non-stock configurations carry an approximate six-week lead time, which is worth factoring into any fit-out or refurbishment programme.

  • Suitable for open servery counters, carvery stations, and plating pickup points
  • Slows heat loss during service without enclosing or obscuring the food
  • Wide choice of finishes and shade styles for front-of-house environments
  • Multiple mounting arrangements to suit different ceiling and gantry setups
  • Stock finish available for prompt supply; custom configurations available to order

It is worth being clear about what this lamp is and is not. It is not a substitute for a heated holding cabinet or drawer where food must be maintained at a safe core temperature for an extended period. Its role is short-term heat retention at the point of service. For operations with higher-volume or longer-duration holding requirements, enclosed or active holding equipment would be the more appropriate solution.

If you are working through which finish, cord drop, or mounting arrangement suits your servery layout — particularly within a specific décor scheme or a tight installation window — we are happy to talk it through before anything is ordered.