Chefs Racks

The Parry 3 Tier Chefs Rack is a wall-mounted stainless steel gantry designed to sit above the pass or a preparation counter. With three shelves at 350mm deep, it provides accessible overhead storage without occupying counter space, keeping plates, bowls, and frequently used mise en place within reach during service. It arrives fully assembled and is available across a range of widths to suit different pass lengths and kitchen layouts.

In a working kitchen, overhead organisation at the pass has a direct effect on service pace. A properly positioned rack means staff do not need to turn away from the line to locate items, and the counter remains clear for plating. The stainless steel construction is well suited to the daily realities of commercial use — steam, temperature fluctuation, and regular wipe-downs are routine, and the material copes without deteriorating over time.

Where the rack is specified with optional quartz downlighters, the benefit extends beyond illumination. The gentle radiant heat from above helps maintain plate and food temperature during the brief window between plating and collection — a worthwhile consideration for any operation where service timing can vary. Without lighting, the rack remains a practical overhead storage solution.

• Fully assembled on delivery, reducing on-site installation time
• Wall-mountable design suitable for most commercial kitchen wall constructions
• Optional quartz downlighters provide pass illumination and gentle radiant warming
• Stainless steel construction withstands steam, heat, and daily cleaning routines
• Available in multiple widths to match existing pass or counter configurations

This rack is well suited to restaurants, cafés, pub kitchens, and similar operations where pass organisation matters during service. For kitchens with longer passes or more demanding overhead storage requirements, wider configurations are available in the range.

If you are deciding on the right width for your pass, or working out whether a lit configuration makes sense for your service style, the team is happy to talk it through.

This Parry wall-mounted chefs rack is a single-tier stainless steel gantry designed to sit above the pass or service counter. At 350mm deep, it provides a practical overhead shelf for staging plates, garnishes, and small items at the point of plating — keeping the counter surface clear without projecting so far that it becomes an obstruction. The rack arrives fully assembled, which removes the need for any on-site fabrication before it goes up.

In a working kitchen, a well-positioned rack above the pass helps keep service moving. Chefs have a consistent place to hold items in the short window between cooking and collection, and clutter on the counter stays manageable during busy service. The single-tier format is well suited to kitchens where ceiling height, extraction canopies, or the depth of the pass make a multi-tier arrangement impractical or unnecessary.

It is also worth considering the optional quartz downlighters available for this rack. Beyond illuminating the pass clearly, they provide a gentle radiant heat that helps maintain plate temperature between the kitchen and front-of-house collection — a practical addition where ticket times vary or covers run closely together.

• Available in a range of widths to suit different pass configurations
• Stainless steel construction resists corrosion and cleans down easily
• Optional quartz downlighters for pass illumination and gentle plate warming
• Arrives fully assembled, reducing on-site installation time
• Suitable for mounting to most standard wall surfaces

Installation is straightforward in most cases, though the wall construction matters. Solid masonry or tiled blockwork presents no difficulty. Stud or plasterboard walls will need appropriate cavity fixings or a timber backing board, particularly if heavier items will be stored or if the lit version is specified. If downlighters are being added, confirm a suitable electrical supply is accessible nearby before the rack goes on order.

This rack suits cafés, pub kitchens, bistros, and small to medium restaurant passes where a single overhead tier handles the volume of service comfortably. For larger operations with multiple pass sections or higher throughput, a wider unit or a two-tier configuration may be the more practical choice. If you are setting up a new pass or replacing an existing gantry, the team is happy to talk through sizing and specification with you beforehand.

The Parry 2 Tier Chefs Rack is a wall-mounted stainless steel pass shelf designed to sit above the service counter. With two open tiers at 300mm depth, it gives the pass team a defined, accessible place to stage outgoing plates and keep garnishes, condiments, and service items within reach without encroaching on the worksurface below.

At the pass, space and order matter more during service than almost anywhere else in the kitchen. A well-positioned chefs rack removes the clutter that accumulates when frequently used items have no defined home. The open-tier design means everything is visible at a glance, and there are no enclosed surfaces to trap grease or debris — wiping down between covers is quick and straightforward. Stainless steel construction handles the heat, steam, and chemical cleaning cycles that come with a working kitchen without deteriorating over time.

Practical advantages for operators include:

• Frees worksurface space at the pass for active plating
• Keeps service items visible and within arm's reach during busy covers
• Open shelving cleans down quickly between services
• Optional quartz downlighters available to illuminate and gently warm plates
• Supplied fully assembled, reducing on-site installation time

The unit is designed for wall mounting and suits most solid kitchen wall surfaces. As with any wall-mounted rack that will carry loaded weight, it is worth confirming wall construction before fitting — masonry or properly backed studwork is preferable to lightweight partitioning. Where the optional quartz downlighters are selected, a nearby electrical supply will be required; this is worth factoring in early if the kitchen is being fitted out rather than retrofitted.

This rack is well suited to restaurants, cafés, pub kitchens, and similar operations where pass organisation has a direct effect on service flow. It suits smaller to mid-sized brigades particularly well. For larger or more complex pass arrangements, wider configurations or additional shelf tiers may be worth considering.

If you are working out the right width for your pass or weighing up whether the lighting option suits your setup, the team is happy to help you think it through before you order.

The Parry two-tier chefs rack is a wall-mounted stainless steel pass rack designed to hold plated dishes, accompaniments, and service items at the kitchen pass. The 350mm shelf depth provides a practical working surface that keeps items accessible without overhanging into the pass to the point of obstruction. The two-tier layout makes good use of the vertical space above the counter without blocking sightlines across the kitchen.

In a working kitchen, a well-positioned pass rack keeps service organised and reduces unnecessary movement between sections during a busy cover run. The upper tier can stage finished plates while the lower holds sauces, garnishes, or accompaniments within easy reach — or the arrangement can be reversed to suit the way your team works. Stainless steel construction handles the heat and humidity of an active service environment without deteriorating, and wipes down quickly between services or at the end of the night.

• Stainless steel construction resists corrosion and cleans down efficiently after service
• Two-tier layout doubles usable pass space without increasing the footprint
• Available across a range of widths to match passes from compact to full kitchen-length
• Optional quartz downlighters help maintain plate and food temperatures during service
• Supplied fully assembled — straightforward to install once wall fixings are secured

Being wall-mounted, the fixing surface needs to be load-bearing and accessible before installation begins. It is worth measuring the pass carefully and accounting for any wall obstructions — extraction brackets, service columns, or conduit runs — before confirming a width. If the quartz downlighter option is being added, a suitable electrical supply will need to be routed to the installation point.

This rack is well suited to restaurants, hotel kitchens, and contract catering operations where a defined pass is in active use during service. Smaller or simpler operations may find a single-tier model meets their needs, while higher-volume kitchens with more complex service requirements may benefit from exploring the broader range of pass and gantry configurations available.

If you are working out which width or configuration fits your pass layout, the team is happy to talk it through before you commit.

The Parry 3-tier chefs rack is a wall-mounted stainless steel gantry designed to provide organised overhead storage at the pass or service station. Three shelving tiers, each 300mm deep, keep plates, smallwares, and mise en place visible and within easy reach without occupying counter space below. The unit is available in a range of widths and arrives fully assembled, ready to fix directly to the wall.

At the pass during a busy service, this kind of overhead organisation earns its place quickly. Keeping frequently used items off the counter reduces clutter, speeds up plating, and gives the pass team a consistent layout to work from. The all-stainless construction handles the heat, moisture, and contact of a working kitchen without degrading, and it wipes down quickly between services — a practical consideration in kitchens where cleaning time is tight.

Where the optional quartz downlighters are specified, the rack takes on a second role: providing pass illumination alongside gentle radiant warmth that helps maintain plate and dish temperatures from above. For operations where dishes sit briefly at the pass before collection, this can remove the need for a separate heat lamp and simplify the pass layout considerably.

• Tiered layout keeps the pass clear and well organised throughout service
• All-stainless construction is robust, hygienic, and straightforward to clean
• Optional quartz downlighters provide pass lighting and useful warmth above the counter
• Arrives fully assembled, reducing installation time on site
• Multiple widths available to suit compact or extended pass configurations

Installation requires secure fixing to a load-bearing wall, so it is worth confirming wall construction, ceiling height above the pass, and available width before ordering. Retrofitting into an existing kitchen layout is straightforward in most cases, but checking clearances beforehand avoids complications on the day.

This rack suits restaurants, pub kitchens, hotel operations, and any site where an organised pass makes a practical difference to service flow. A narrower unit is typically adequate for smaller café or bistro operations; wider configurations are better matched to higher-volume environments where more items need to be accessible simultaneously. For operations that require deeper shelving or a more substantial gantry structure, heavier-duty options are available within the range.

If you are working out the right width for your pass or deciding whether the lit version suits your service style, we are happy to talk it through before you place an order.