Cambro Shelving & Storage Racks

The Cambro Camshelving Premium Starter Unit is a four-tier freestanding shelving system built for serious commercial storage environments. Constructed from coated steel, it is designed to handle the weight demands, humidity levels, and daily rigours typical of professional food service operations — from walk-in refrigerators and dry stores to prep areas and back-of-house storage rooms.

In high-volume kitchens where storage discipline is critical, this unit holds its own. The shelf plates are removable and can be repositioned to accommodate different container heights or storage configurations, which helps operators adapt quickly as stock profiles change across service periods. The traverse and shelf plate system means there are no hidden corners that are difficult to reach — a practical advantage when kitchen hygiene standards are being maintained under time pressure.

Key operational advantages include:

• Shelf plates carry antimicrobial Camguard protection moulded directly into the material — not a surface coating that wears away
• Shelf plates are safe to run through a commercial dishwasher, reducing manual cleaning time
• The shared post design allows multiple units to connect in a straight run without reducing load-bearing capacity
• Optional corner connectors support L-shape, U-shape, and T-shape configurations where space planning requires it
• Tool-free assembly and disassembly makes deep cleaning and reconfiguration straightforward for kitchen staff

This is a floor-standing unit requiring no fixings or wall support under normal use. At 1830mm tall, it is worth confirming ceiling clearance in refrigerated rooms or low-ceiling storage areas before ordering. The 610mm depth suits standard storage shelving layouts, though kitchens with very limited floor space may need to consider a shallower configuration. The starter unit stands independently; add-on units can be joined using the shared post system to extend capacity without duplicating posts.

This unit suits catering operations that need reliable, hygienic storage with the flexibility to reconfigure as requirements change — contract caterers, hotel kitchens, school and hospital catering facilities, and larger independent restaurants are all typical environments where it performs well. Sites with very modest storage requirements may find a smaller or lighter-duty shelving option more cost-effective, while high-density stores managing very heavy loads across many bays may benefit from looking at extended configurations or additional units.

If you are planning a storage layout and want to talk through unit quantities, spacing, or configuration options for your site, we are happy to assist before you place an order.

The Cambro Camshelving Premium Starter Unit is a four-tier open shelving system designed for professional food service storage. Built from coated steel with polymer shelf plates, it provides a stable, hygienic racking solution for walk-in chillers, dry stores, and preparation areas in commercial kitchens.

In practice, this unit handles the demands of high-volume food service operations reliably. The shelf plates are engineered to carry substantial combined loads without flex or deformation, which matters when shelves are regularly stacked with full gastronorm containers, bulk dry goods, or heavy catering tins. The coated steel construction holds up well in the fluctuating temperatures and humidity levels typical of chiller and ambient storage environments.

Several features translate directly into operational advantages for kitchen teams:

• Shelf plates incorporate moulded-in Camguard antimicrobial protection, reducing surface bacterial growth between cleans
• Plates are removable and rated for commercial dishwashers, making thorough cleaning straightforward and compliant with food hygiene requirements
• Traverses and shelf plates adjust without tools, so height configurations can be changed quickly as storage needs shift
• The shared post design allows additional units to be joined in a straight run using a single shared upright, saving floor space
• Optional corner connectors support L-shape, U-shape, and T-shape configurations for fitting storage into irregular or corner spaces

Installation is straightforward — the system assembles without tools and requires no wall fixing in standard configurations. At 1830mm tall and 610mm deep, it suits most walk-in cold rooms and dry stores, though ceiling height and door clearance should be confirmed before ordering. The unit ships as a starter kit; additional units or accessories are available separately to extend the configuration. Weight should be considered when positioning in older or lighter-duty flooring environments.

This unit is well suited to small and medium catering operations, hotel kitchens, school and care facility kitchens, and food service prep environments where reliable, cleanable storage is a priority. For very large central production units or sites requiring significant multi-bay runs, higher-capacity or extended configurations may be worth discussing.

If you are unsure whether this unit works for your space or storage volumes, the team is happy to talk through the options before you commit.

The Cambro Camshelving Premium Starter Unit is a heavy-duty open shelving system designed for demanding commercial food storage environments. Built from coated steel with a four-tier configuration, it provides a practical, hygienic framework for dry store, walk-in chiller, and back-of-house storage areas where durability and load-bearing reliability matter.

In practice, this unit is built to handle the sustained weight and constant access typical of a busy kitchen. The shared post design means units can be arranged in straight runs sharing a single post, which helps maximise usable floor space without compromising load-bearing integrity. Optional corner connectors allow L-shape, U-shape, or T-shape configurations if your layout requires it.

From an operational standpoint, the key advantages are straightforward:

• Shelf plates carry antimicrobial Camguard protection moulded directly into the material, reducing surface bacterial growth between cleans
• Shelf plates and traverses are removable, making height adjustment and deep cleaning practical rather than disruptive
• All shelf plates are rated for commercial dishwasher cleaning, supporting compliance with food hygiene standards
• Assembly is tool-free and straightforward, reducing installation time
• The coated steel construction resists the moisture and condensation common in refrigerated storage areas

Installation is largely straightforward — no power, water, or gas connections are required. The unit weighs just under 39kg assembled, so siting and repositioning can typically be managed in-house. The 540mm depth suits standard back-of-house layouts, though you should confirm aisle clearance before ordering, particularly in tighter walk-in cooler configurations. This is a starter unit, meaning it is designed to stand alone or be extended with add-on units using the shared post system.

This unit is well suited to medium- and high-volume operations including hotel kitchens, contract catering sites, school kitchens, and food production environments where hygienic, heavy-duty storage is a day-to-day requirement. For sites needing greater width or a higher number of tiers, larger configurations are available within the Premium range. For lighter-duty or lower-budget applications, Cambro's entry-level shelving range may be worth considering.

If you are fitting out a new storage area or replacing existing shelving across a site, it is worth speaking with us before you order — getting the configuration right from the outset avoids unnecessary returns and ensures the layout works with your available space.

The Cambro Camshelving Premium Starter Unit is a four-tier open shelving system built for demanding commercial storage environments. Constructed from coated steel, it is designed to hold substantial loads across all four shelves, making it a practical choice for walk-in refrigerators, dry stores, prep areas, and back-of-house storage rooms where reliability and hygiene are non-negotiable.

In a busy food service operation, storage shelving takes considerably more punishment than it might appear to. Units are loaded and unloaded repeatedly throughout the day, often under time pressure and by multiple team members. The Premium Series is built with this reality in mind. The shelf plates are removable, which makes it straightforward to reconfigure heights as storage needs change and to clean the unit thoroughly — something that matters considerably when shelving is used for food storage and is subject to environmental health inspection.

A few features worth noting for day-to-day operations:

• Shelf plates incorporate moulded-in Camguard antimicrobial protection as standard
• Shelf plates are rated for commercial dishwasher cleaning, simplifying deep-clean routines
• Removable traverses and shelf plates allow full height adjustment without specialist tools
• The shared post design allows units to be joined in a straight run without reducing load capacity
• Optional corner connectors support L-shape, U-shape, and T-shape configurations

As a starter unit, this shelving is designed to be expanded. Additional units can be added using the shared post system, meaning your storage layout can grow alongside your operation without a full replacement purchase.

This unit suits most mid-to-large food service environments. For very high-density storage requirements or facilities operating in particularly wet or corrosive conditions, it is worth discussing alternative configurations or materials before committing to a layout.

If you are planning a walk-in store or a larger shelving layout, our team is happy to work through the configuration with you before you order.

The Cambro Camshelving Premium Starter Unit is a four-tier open shelving system built for demanding food service storage environments. Constructed from coated steel, it provides a stable, hygienic storage solution commonly used in walk-in refrigeration, dry stores, and back-of-house preparation areas. As a starter unit, it is designed to operate as a standalone bay or as the foundation of a larger, extended shelving run.

In busy commercial kitchens, reliable storage infrastructure is often taken for granted until it fails. Premium Series shelving is designed to hold significant load across all four tiers without racking or deforming under sustained use. The shelf plates are removable, which allows operators to reconfigure shelf heights quickly without tools — useful when storage requirements change between service periods or when rotating large GN containers and bulk stock.

The operational advantages of this system come down to a few practical details worth noting:

• Shelf plates carry moulded-in antimicrobial Camguard protection, reducing bacterial transfer on contact surfaces
• All shelf plates are rated for commercial dishwasher use, supporting thorough cleaning without hand-washing delays
• The post-sharing design allows multiple units to connect in a straight run using a single shared post, saving floor space without reducing load-bearing performance
• Optional corner connectors support L-shape, U-shape, and T-shape configurations if a straight run does not suit the room layout
• Tool-free assembly and disassembly makes deep cleaning and reconfiguration straightforward for kitchen staff

Installation is straightforward — this unit requires no electrical, water, or gas connections. It is freestanding and suitable for most floor surfaces, though operators in refrigerated environments should confirm the unit dimensions work within the available internal footprint before ordering. The coated steel construction is appropriate for ambient and chilled storage; it is worth considering whether a polymer shelving option might be more suitable if the unit will be used in a high-moisture or wash-down environment long term.

This unit is well suited to medium and high-volume operations needing structured, hygienic dry or chilled storage — catering companies, hotel kitchens, school and hospital catering facilities, and contract caterers will all find it a practical fit. For very large storage areas requiring multiple extended bays, it is worth discussing the full range of add-on and corner configuration options before committing to a layout.

If you are planning a storage fit-out or are unsure how many units and what configuration will work best for your space, we are happy to talk it through before you order.

The Cambro Camshelving Premium Starter Unit is a four-tier open shelving system designed for heavy-duty food storage in commercial kitchens, preparation areas, walk-in cold rooms, and dry goods stores. Built from coated steel, it assembles without tools and can be reconfigured as storage requirements change, making it a practical long-term investment rather than a fixed installation.

In busy service environments, the Premium Series earns its reputation through its load capacity and structural consistency. Each unit is rated to hold up to 800 kg, distributed across four tiers, which means it handles bulk ingredient stock, full gastronorm containers, and heavy equipment without flex or instability. The shelf height adjustments can be made quickly on the floor, allowing operators to adapt configurations to seasonal stock changes or varied container sizes without specialist tools or replacement parts.

From a practical standpoint, the shelf plates offer meaningful advantages over wire shelving alternatives:

• Shelf plates carry moulded-in Camguard antimicrobial protection, reducing surface bacterial growth between cleans
• Plates are removable and rated for commercial dishwashers, supporting thorough cleaning during kitchen deep-cleans
• The post-sharing design allows additional units to be added in a straight run using a single shared post, reducing cost and floor footprint when expanding
• Optional corner connectors support L-shape, U-shape, and T-shape layouts without significant loss of load capacity
• Solid shelf plates prevent spillage falling through to lower tiers, which is a meaningful hygiene advantage over open wire alternatives

This unit stands at 1830mm tall and projects 540mm from the wall, which suits most standard kitchen and storeroom layouts. It is worth confirming ceiling clearance and door access before specifying the full height version, particularly in basement prep kitchens or rooms with low-profile extract ducting. The unit weighs just over 33 kg unloaded, so relocation once stocked is a two-person task.

The Premium Starter Unit is well suited to independent restaurants, hotel kitchens, school catering operations, and any site where robust, hygienic storage is a recurring challenge. For sites with more limited floor space or lower stock volumes, a narrower or three-tier configuration may be a better fit; for very high-volume operations requiring a complete shelving run from day one, the add-on units designed to share posts with this starter are worth considering alongside it.

If you are planning a storage area from scratch or expanding an existing one, it is worth talking through the layout before ordering — the team is happy to help work out what configuration will suit your site.

The Cambro Camshelving Premium Starter Unit is a four-tier open shelving system designed for demanding commercial storage environments. Built around a coated steel post-and-shelf construction, it provides a stable, hygienic storage solution for dry goods, packaged produce, gastronorm containers, and general kitchen sundries. As a starter unit, it functions as a standalone bay and is also the foundation of any expanded Camshelving Premium configuration.

In busy food service operations, storage shelving is rarely given the same attention as cooking equipment — yet poorly chosen racking causes daily inefficiencies. The Premium Series addresses this through a genuinely robust build that holds up under sustained commercial use, with shelf plates that tolerate heavy loads without flexing and posts that remain stable when units are regularly accessed during a busy service. The removable traverses and shelf plates allow shelf heights to be adjusted quickly when storage needs change, which is a practical advantage in kitchens that handle varied produce deliveries or shift between seasonal menus.

From an operational standpoint, a few features are worth highlighting:

• Shelf plates are moulded with built-in antimicrobial Camguard protection, which reduces surface bacteria without the need for chemical additives
• Plates are safe to run through a commercial dishwasher, making deep cleans straightforward during prep downtime
• The shared post system allows additional units to be joined in a straight run, sharing a single post without any reduction in load-bearing capacity
• Optional corner connectors support L-shape, U-shape, and T-shape configurations for kitchens with non-linear storage areas

Installation is straightforward — this is a freestanding unit that requires no fixings, utilities, or specialist tools. It assembles tool-free, which also means it can be relocated or reconfigured without disruption. The coated steel posts are suited to dry and ambient storage areas; operators storing goods in refrigerated rooms or areas with regular hosing should confirm the unit's suitability for those conditions before purchasing. At just over 27 kg unloaded, it is manageable to position but worth planning access routes on delivery given its height.

This unit is well suited to small and mid-sized kitchens needing a reliable standalone shelving bay, as well as larger operations building out a modular shelving run using multiple units. It is commonly used in pub kitchens, care home facilities, school catering stores, and restaurant dry goods areas. Sites requiring significantly greater storage capacity or more specialised racking — such as cantilever or mobile shelving — may find it worth exploring heavier-duty alternatives within the range.

If you are planning a storage layout or are unsure whether this unit fits your available space and workflow, our team is happy to talk through the options with you before you order.

The Cambro Camshelving Premium Starter Unit is a heavy-duty open shelving system designed for demanding storage environments in commercial food service. Built on coated steel posts with injection-moulded shelf plates, it offers a robust, hygienic storage solution suitable for dry stores, walk-in refrigeration, and general back-of-house use. As a starter unit, it provides everything needed to set up a single freestanding bay, with the option to expand or link additional units as storage requirements grow.

In busy kitchen environments, reliable storage structure matters as much as the equipment it holds. The Camshelving Premium range is rated to support substantial combined loads across the unit, making it well suited to high-volume operations where shelves are consistently loaded with heavy ingredient stocks, large-format containers, or bulk dry goods. The shelf plates are adjustable in height, allowing operators to reconfigure the layout without tools as stock profiles change across seasons or menus.

From a practical standpoint, the system offers several advantages for kitchen teams:

• Shelf plates carry moulded-in Camguard antimicrobial protection, reducing bacterial growth on contact surfaces
• Individual shelf plates are removable and can be run through a commercial dishwasher for thorough cleaning
• The shared post design allows multiple units to be joined in a straight run without duplicating posts or losing structural integrity
• Optional corner connectors support L-shape, U-shape, or T-shape configurations for corner or alcove spaces
• Tool-free assembly and adjustment reduces time spent on setup and routine reorganisation

Installation is straightforward — no fixing to walls or floors is required for standard use, though operators should ensure the floor surface is level and capable of bearing the loaded weight of the unit. The coated steel construction means this unit is suitable for ambient dry storage but should not be used in direct contact with standing water or steam-heavy environments without considering the longer-term effect on the coating. Walk-in refrigeration use is supported by the design, but shelf plate fit and post compatibility with refrigeration-specific fittings should be confirmed at the point of order if this is the intended application.

This starter unit is a practical choice for small to medium food service operations looking for a compliant, long-lasting shelving solution. Larger sites with more extensive storage requirements may find value in multiple linked units or higher-capacity configurations. If you are planning a full storage layout or working within a specific floor plan, it is worth talking through the options before committing to a single unit.

The Cambro Camshelving Premium Starter Unit is a four-tier open shelving system built for demanding commercial storage environments. Constructed from coated steel, it is designed to carry substantial loads across all four shelves while remaining straightforward to assemble and reconfigure without tools. As a starter unit, it forms the foundation of a larger shelving run — additional units can be added in a straight line using a shared post design, which maintains load-bearing capacity without requiring a full extra post at every join.

In busy kitchen, dry store, and cold room environments, this shelving performs reliably under the kind of daily punishment that causes lighter-duty systems to flex or degrade over time. The shelf heights are fully adjustable, allowing operators to accommodate everything from deep gastronorm containers to smaller prep items without wasted vertical space. Shelf plates can be removed individually for thorough cleaning and are safe to run through a commercial dishwasher — a practical advantage in environments where hygiene audits are routine.

Key operational advantages include:

• Antimicrobial Camguard protection moulded directly into the shelf plates, not applied as a coating
• Fully removable shelf plates and traverses for complete, unrestricted cleaning access
• Shared post design allows units to be joined in line without sacrificing load capacity
• Optional corner connectors support L-shape, U-shape, and T-shape configurations
• Dishwasher-safe shelf plates reduce manual cleaning time during close-down

This is a floor-standing unit requiring level, stable ground. The coated steel construction is suited to dry stores, ambient prep areas, and general back-of-house storage. For refrigerated or blast-chilled environments, it is worth confirming material suitability with the team before ordering. At 915mm wide and 460mm deep, it fits comfortably in standard storeroom layouts, though access clearance on all sides should be considered if the unit will be part of a larger shelving configuration.

The Premium Starter Unit is well suited to high-volume kitchens, central production units, and catering operations where storage demands are heavy and hygiene standards are non-negotiable. For sites with lighter storage requirements or tighter budgets, there are smaller and lower-specification alternatives available; equally, for operations needing greater capacity across a larger footprint, extended configurations are achievable through add-on units.

If you are planning a larger shelving layout or are unsure which configuration best suits your storeroom, our team is happy to work through the options with you before you order.

This is an add-on shelving unit from Cambro's Camshelving Basics Plus range, designed to extend an existing Basics Plus stationary unit rather than stand alone. It arrives with one post kit, eight traverses, and the shelf plates needed to connect to an adjoining unit, giving you a four-tier vented configuration that integrates cleanly into your current shelving run without any reduction in load-bearing capacity.

In practice, Camshelving Basics Plus is a well-established choice in commercial dry stores, walk-in fridges, and freezer rooms. The vented shelf plates allow air to circulate freely around stored product, which is particularly useful in refrigerated environments where airflow directly affects temperature consistency. The plastic construction means there is no risk of rust or corrosion over time — an important practical consideration in humid storage areas where metal shelving can deteriorate and create compliance issues.

The operational advantages of this system are straightforward:

• Shelf heights can be adjusted without tools, so the unit adapts as your storage needs change
• Individual shelf plates are removable and dishwasher safe, making deep cleaning routine rather than disruptive
• Add-on units can be configured in straight, L-shape, or T-shape runs, giving flexibility in awkward or irregular storage spaces
• Lightweight construction reduces physical handling effort when reconfiguring the layout

Because this is an add-on unit, it requires an existing Cambro Camshelving Basics Plus stationary unit to attach to — it cannot be used independently. It is worth confirming your current shelving is the correct Basics Plus series before ordering, as it is not compatible with other Cambro ranges. For very high-volume operations with heavy stock rotation, it is worth considering whether a heavier-duty shelving system might be more appropriate for certain areas of the kitchen.

This unit is well suited to cafés, pubs, school kitchens, and smaller contract catering operations looking to expand their existing Basics Plus storage in a cost-effective way. If you are building out a larger storage system or are unsure which configuration best fits your space, the team is happy to help you work through the options before you order.

This is an add-on shelving unit from the Cambro Camshelving Basics Plus range, designed to extend an existing Camshelving Basics Plus stationary unit. It ships with one post kit, eight traverses, and shelf plates, giving operators everything needed to connect directly to an adjoining unit without additional hardware. The vented shelf plates allow air to circulate freely, which makes this configuration a practical choice for walk-in refrigeration or freezer storage as well as standard dry goods areas.

In busy commercial kitchens, storage organisation has a direct bearing on how smoothly service runs. Camshelving Basics Plus is built from durable polymer throughout, which means it resists the rust and corrosion that can affect wire or mild steel shelving over time — particularly in humid or cold environments where condensation is a daily reality. The material is also straightforward to wipe down at the end of service, and the individual shelf plates are removable and dishwasher safe, so periodic deep cleaning does not require dismantling the entire unit.

Key practical points worth noting:

• Connects only to Cambro Camshelving Basics Plus stationary units — not compatible with other Camshelving series
• Can be configured in a straight line, L-shape, or T-shape to make use of corner or awkward storage spaces
• Weight-bearing capacity is maintained when add-ons are joined to a stationary unit
• Shelf positions are adjustable without tools, allowing the unit to be reconfigured as stock profiles change
• Suitable for dry stores, walk-in chillers, and freezer rooms

Because this is an add-on unit rather than a standalone system, you will need at least one Camshelving Basics Plus stationary unit already in place before purchasing. It is worth considering the full layout of your storage area before ordering — the ability to run multiple add-ons in different configurations means the system can be planned to suit the space properly rather than working around it.

This unit is well suited to kitchens of most sizes that already use the Camshelving Basics Plus system and need to expand capacity. For operations with very high storage volumes or heavier load requirements, it is worth looking at the broader Camshelving range, where higher-specification options are available.

If you are planning a storage layout or are unsure whether this unit is the right fit for your existing shelving configuration, the team is happy to talk it through with you before you order.

The Cambro Camshelving Basics Plus Add-On Unit is a four-tier plastic shelving unit designed to extend an existing Camshelving Basics Plus stationary bay. It is not a standalone unit — it shares a post with the adjoining section, which keeps the footprint compact while maintaining full load-bearing capacity across the combined run. Each add-on ships with one post kit, eight traverses and the shelf plates needed to connect to the next bay.

Vented shelf plates are the standard choice in most storage environments because they allow air to circulate freely around stored goods. This makes the unit a practical fit for walk-in chillers and freezers as well as ambient dry stores, where airflow around product can support consistent temperature maintenance and reduce condensation build-up on shelving surfaces.

In day-to-day operation, the shelving holds up well under the kind of consistent heavy loading that commercial kitchens place on storage systems. The plastic construction resists rust and corrosion — relevant in the damp conditions common to chiller rooms and dishwash areas — and individual shelf plates are removable and dishwasher safe, which simplifies deep-cleaning routines.

• Add-on units can be configured in straight, L-shape or T-shape runs to make use of awkward floor space.
• Shelf height is adjustable without tools, allowing the unit to be reconfigured as stock profiles change.
• The plastic construction eliminates rust risk, making it well suited to wet or refrigerated storage areas.
• Shelf plates are dishwasher safe, reducing the time needed for periodic deep cleans.

This unit is best suited to operations that already have Camshelving Basics Plus stationary bays in place and need to extend their storage run. It is not compatible with other Camshelving series. For higher-volume sites needing heavier-duty or mobile shelving solutions, other options in the range may be worth considering.

If you are planning a storage layout and want to work through bay configurations or quantities before ordering, the team is happy to help.

This is an add-on unit for the Cambro Camshelving Basics Plus range, designed to extend an existing stationary unit configuration without starting from scratch. It arrives with one post kit, traverses, and shelf plates — everything needed to attach it to an adjoining Camshelving Basics Plus stationary unit. It is important to note that add-on units are not standalone; they require a compatible stationary unit to connect to.

In practice, Camshelving Basics Plus is a well-established choice for back-of-house dry storage, walk-in coolers, and freezer rooms. The plastic construction resists rust and corrosion reliably over time, which matters in humid cold-store environments where metal shelving can deteriorate. The vented shelf plates allow air to circulate freely, which is particularly useful in refrigerated storage where airflow affects temperature consistency and hygiene compliance.

The add-on format gives operators practical flexibility in how storage areas are arranged. Units can be configured in a straight line to extend capacity, or set into an L-shape or T-shape to make more efficient use of irregular floor plans — useful in older or converted kitchen spaces where storage rooms are rarely a perfect rectangle.

• Shelf plates are removable and dishwasher safe, simplifying cleaning schedules
• Shelves adjust without tools, allowing reconfiguration as stock levels and product sizes change
• Plastic construction does not rust or corrode, suitable for damp and cold environments
• Connects to existing Camshelving Basics Plus stationary units without reducing weight-bearing capacity

This unit suits operations that already have Camshelving Basics Plus stationary units in place and need to expand capacity incrementally. For sites starting from scratch or requiring a larger initial footprint, a stationary unit should be the first purchase. If your storage demands are more substantial or you are fitting out a large-scale operation, it is worth considering whether a heavier-duty shelving range might be a better long-term investment.

If you are unsure whether this add-on is compatible with your existing units or want guidance on configuring a storage layout, the team is happy to talk it through with you before you order.

The Cambro Camshelving Basics Plus Add-On Unit is a four-tier plastic shelving unit designed to extend an existing Camshelving Basics Plus stationary run. It is not a standalone unit — it connects directly to a compatible stationary unit and shares one post kit between them, making efficient use of floor space and keeping the overall structure stable. The vented shelf plates allow air to circulate freely, which is particularly useful in refrigerated and freezer environments where airflow affects temperature consistency.

In practice, these units are a straightforward and reliable solution for dry stores, walk-in fridges, and freezer rooms where plastic shelving outperforms steel — there is no risk of rust or corrosion, and the material holds up well under the damp, cold conditions that cause painted steel to deteriorate over time. The shelving can be configured in a straight line, L-shape, or T-shape, which gives some flexibility when fitting out an awkward storage room or maximising a corner space.

From an operational standpoint, the key practical advantages are:

• Vented shelf plates support airflow in refrigerated and freezer storage
• Shelf plates are removable and dishwasher safe, making deep cleaning straightforward
• Shelf heights are adjustable without tools, allowing the unit to adapt as stock profiles change
• Plastic construction eliminates rust and corrosion concerns in wet or cold environments
• Add-on configuration shares a post with the adjoining unit, maintaining full weight-bearing capacity

This unit requires an existing Cambro Camshelving Basics Plus stationary unit to connect to — it cannot be used in isolation. If you are starting a new shelving run from scratch, you will need at least one stationary unit first. For larger storage areas or higher-volume operations requiring greater shelf depth or load capacity, it is worth considering whether a heavier-duty shelving system would be a better long-term fit.

This add-on unit suits operations that are already running Camshelving Basics Plus and need to extend capacity, or those planning a new installation and building out from a stationary starter unit. It works equally well in small prep kitchens, back-of-house dry stores, and temperature-controlled rooms.

If you are unsure whether this unit is compatible with your existing shelving or how many units your storage space requires, we are happy to talk it through before you order.

The Cambro Camshelving Basics Plus is a five-tier plastic shelving starter unit designed for use in commercial food storage environments. Built from a lightweight composite plastic material, it provides a non-corrosive alternative to chrome wire or stainless steel shelving, making it a practical choice for areas where moisture exposure and chemical cleaning are a regular part of the routine — cold rooms, walk-in refrigerators, dry stores, and wash-up areas being the most common applications.

In busy kitchen environments, shelving takes sustained punishment. The composite construction handles the daily knocks of loading and unloading without warping, rusting, or degrading over time. The non-porous surface resists bacterial harbouring, which matters in areas subject to food safety audits. Because shelf plates are dishwasher safe, cleaning down at the end of service is straightforward and does not require the unit to be dismantled entirely.

Practical advantages for kitchen operators include:

• Non-corrosive material performs reliably in high-humidity and refrigerated environments
• Lightweight construction makes reconfiguring storage layouts manageable without additional labour
• Dishwasher-safe shelf plates reduce cleaning time at the end of service
• No rust risk eliminates a common cause of failed hygiene inspections
• Tool-free post-and-shelf assembly suits kitchens that reconfigure storage seasonally

As a starter unit, this shelving ships as a self-contained configuration with uprights and five shelf levels included. It does not require a wall fixing in standard use, though placement on a level floor is important for stability, particularly when fully loaded. The plastic construction means it is not suited to storing very heavy bulk loads that a reinforced steel unit would handle more comfortably. For sites needing to carry dense stock — catering tins, bulk dry goods at volume — it is worth considering whether a heavier-duty shelving system would be more appropriate.

This unit is well suited to small and medium catering operations, hotel kitchens, school and workplace canteens, and any site where corrosion-resistant, easy-clean storage is a priority. The starter unit format works independently or can be extended with compatible add-on units where additional run length is needed. For higher-volume storage requirements, larger or higher-capacity configurations are available in the same range.

If you are unsure whether this unit fits your available space or storage demands, the team is happy to talk through your requirements before you order.

The Cambro Camshelving Basics Plus is a five-tier freestanding shelving unit constructed from a composite plastic material. It is designed to provide reliable dry and ambient storage in commercial kitchen, food preparation, and back-of-house environments where metal shelving is vulnerable to moisture, cleaning chemicals, or temperature fluctuation.

In busy kitchen environments, shelving takes a great deal of punishment — daily wipe-downs, trolley impacts, heavy stock loads, and exposure to steam and humidity. The composite material used in this unit does not corrode, rust, or flake in the way that wire or painted steel alternatives can over time, which matters in kitchens where hygiene standards are closely inspected. The plastic shelf plates are dishwasher safe, which reduces the time spent on deep cleans and keeps the unit looking presentable with minimal effort.

The practical advantages of this unit in day-to-day service are straightforward:

• Non-corrosive material holds up well in damp or humid storage areas
• Lightweight construction makes reconfiguration and repositioning straightforward
• Dishwasher-safe shelf plates simplify cleaning routines
• Five tiers provide good vertical storage density without a large footprint
• Starter unit format means it can be extended with add-on units if requirements grow

This unit requires no utilities — no electrical connection, plumbing, or ventilation. Installation is simply a case of assembly and positioning. At 915mm wide and 610mm deep it suits most standard storeroom bays, though it is worth confirming clearances before ordering, particularly in narrow corridors or under fixed shelving runs. The plastic construction keeps the unit light relative to steel alternatives, which is useful where frequent repositioning is expected.

This unit is well suited to smaller operations such as cafés, pubs, and school kitchens, as well as larger sites looking to add dedicated ambient storage in a dry store, cellar, or prep area. It is a starter configuration, so for sites needing wider coverage or longer runs, additional units can be added alongside it. For environments requiring very heavy pallet-level loads or chilled storage integration, a more heavy-duty shelving system would be worth considering.

If you are fitting out a new storage area or replacing ageing shelving, the team is happy to talk through how many units you are likely to need and whether this range fits your layout.

The Cambro Camshelving Basics Plus Starter Unit is a five-tier open shelving system built from a composite plastic material that resists corrosion, moisture and the general punishment that comes with busy kitchen and storage environments. As a starter unit, it comes ready to stand independently and forms the foundation of a modular system that can be extended with add-on units as storage requirements grow.

In commercial kitchens, the main advantage of plastic shelving over wire or chrome-plated alternatives is straightforward: there is no metal to rust. In walk-in chiller rooms, pot wash areas, dry stores, and anywhere with regular wash-down routines, this matters. The material is robust enough to handle the daily loading and unloading that service demands without warping or surface degradation over time.

From an operational standpoint, this shelving earns its place through low maintenance and practical hygiene compliance:

• Non-corrosive composite material tolerates damp and humid environments without deteriorating
• Shelf plates are dishwasher safe, supporting efficient cleaning turnarounds
• Smooth surfaces wipe down quickly between services
• Modular design allows the unit to be extended as storage needs change
• Lightweight construction makes reconfiguration straightforward without specialist tools

At over two metres tall and more than 1.5 metres wide, this is a substantial unit suited to larger storage areas. It is worth confirming ceiling clearance and door access before delivery, particularly in basement stores or older kitchen buildings where access can be restricted. The unit is designed for indoor use in commercial environments and should be positioned on a level surface.

This unit is well suited to catering operations that need reliable, hygienic shelving in wet or humid storage areas — including walk-in refrigeration, pot wash zones, and dry stores. Smaller operations or those with tighter storage footprints may find a narrower or shorter configuration more appropriate, while high-volume sites with extensive storage demands may want to consider heavier-duty shelving designed for greater load capacity.

If you are unsure whether this unit fits your storage layout or want to discuss extending it into a larger system, the team is happy to talk it through with you.

The Cambro Camshelving Basics Plus starter unit is a five-tier open shelving system designed for general storage use in commercial kitchens, prep areas, dry stores, and walk-in refrigeration. It is constructed from a composite plastic material that does not corrode, rust, or absorb moisture — a practical advantage over wire or steel shelving in damp or cold environments.

In day-to-day kitchen use, the non-corrosive construction holds up well under the cleaning regimes that commercial kitchens demand. There are no metal components vulnerable to rust from repeated washing or condensation, which is particularly relevant in refrigerated or high-humidity environments. The shelf plates are dishwasher safe, which reduces the time spent on manual cleaning during changeovers.

From an operational standpoint, this unit offers a number of practical benefits:

• Lightweight composite material makes repositioning and reconfiguring straightforward without heavy lifting
• Non-porous surfaces resist bacterial harbouring and wipe clean quickly during service
• Dishwasher-safe shelf plates reduce manual cleaning time between uses
• No corrosion risk makes it suitable for refrigerated storage and wet prep areas
• Starter unit format means additional shelving can be added as storage needs grow

Installation is straightforward — the unit is free-standing and requires no fixings, power, or drainage. At just over two metres tall and 1220mm wide, it is worth confirming ceiling clearance and doorway access before delivery, particularly in older kitchen builds. The 540mm shelf depth is well suited to standard catering trays and gastronorm containers.

This unit is a sensible choice for small to mid-sized operations looking for reliable, hygienic dry or refrigerated storage. Larger sites with higher throughput or heavier load requirements may find a heavier-duty shelving system better suited to their needs.

If you are unsure whether this unit fits your storage layout or whether a different configuration would serve you better, the team is happy to talk it through.

The Cambro Camshelving Basics Plus is a five-tier plastic shelving starter unit designed for use in commercial food storage environments. Built from a lightweight composite material, it provides a practical and corrosion-free alternative to traditional wire or stainless steel shelving, making it a common choice for dry stores, walk-in chillers, and prep areas where hygiene and durability are everyday priorities.

In operational terms, the non-corrosive construction means the unit holds up reliably in damp or humid conditions without the surface degradation that can affect metal alternatives over time. The shelf plates are dishwasher safe, which keeps cleaning straightforward and reduces the time staff spend maintaining storage areas during turnaround periods.

Key practical advantages include:

• Lightweight composite material is easy to reposition without tools
• Non-corrosive construction suits cold rooms and humid storage areas
• Dishwasher-safe shelf plates simplify routine cleaning
• Starter unit format allows additional sections to be added as storage needs grow
• Smooth surfaces reduce food residue build-up between cleans

As a starter unit, this shelving is designed to work with compatible add-on units, so storage capacity can be extended without replacing existing kit. It is well suited to small and medium-sized operations looking for reliable, easy-to-maintain shelving. For larger sites or high-density storage requirements, heavier-duty shelving formats may be worth considering.

If you are unsure whether this unit is the right fit for your storage layout or volume, the team is happy to talk it through with you.

The Cambro Camshelving Basics Plus is a four-tier open shelving unit built from a lightweight composite plastic that resists corrosion, moisture, and the general punishment of a busy commercial kitchen environment. Unlike chrome wire or steel shelving, the plastic construction will not rust when exposed to water or cleaning chemicals, making it a practical long-term storage solution in areas where humidity and condensation are a regular concern — walk-in cold rooms, pot wash areas, and dry store rooms being the most common applications.

In day-to-day service, the unit holds its form reliably under the weight of bulk dry goods, catering equipment, and stacked containers. The shelf plates themselves are dishwasher safe, which makes periodic deep cleaning straightforward and reduces the time staff spend on manual scrubbing. The surfaces wipe down easily between services, which matters in any environment where hygiene standards are inspected.

Key practical advantages for operators include:

• Non-corrosive plastic construction — no rusting in damp or refrigerated areas
• Dishwasher-safe shelf plates for efficient, thorough cleaning
• Lightweight build that reduces strain during installation and rearrangement
• Open-tier design that allows airflow and visibility across stored stock
• Adjustable shelf positions to accommodate varying container heights

Being a starter unit, this shelving is designed to function as a standalone bay or as the anchor unit of a longer run — additional bays can typically be added using compatible add-on units, which share the same post system. It is worth confirming bay compatibility before ordering if you intend to extend the shelving run.

This unit is well suited to smaller kitchens, single-section storage areas, and operations where non-corrosive shelving is a hygiene or maintenance priority. For sites with very high stock volumes or larger storeroom layouts, a wider or deeper configuration may serve better.

If you are unsure whether this size suits your storage layout or whether add-on units are the right next step, our team is happy to help you plan it out before you order.

The Cambro Camshelving Basics Plus is a four-tier open shelving starter unit constructed from a composite plastic material. It is designed to provide practical, organised storage in commercial kitchen environments where corrosion resistance, ease of cleaning, and durability under daily use are priorities. As a starter unit, it includes the uprights and shelf tiers needed to form a standalone shelving bay straight away, without requiring additional components to get up and running.

In practical terms, plastic composite shelving of this type holds up well in the wet and humid conditions that are common in back-of-house areas — walk-in storage rooms, preparation areas, and dry stores in particular. Unlike wire shelving, the solid shelf plates do not allow small items or debris to fall through, which helps keep storage areas tidy and reduces the time spent retrieving dropped goods. The material does not rust or corrode, which matters in environments where shelving is regularly hosed down or subjected to moisture.

From an operational standpoint, this unit offers a number of practical advantages:

• Shelf plates are dishwasher safe, simplifying deep-clean routines
• Non-corrosive composite material holds up in damp or humid storage areas
• Lightweight construction makes repositioning straightforward without heavy lifting
• Open-bay design gives clear sightlines for stock rotation and inventory checks
• Smooth surfaces wipe clean quickly between services

Installation is straightforward — no fixings or specialist tools are required to assemble the unit. It is free-standing, so it can be positioned as needed and moved if the layout changes. The four-tier configuration provides a useful spread of storage height for varied goods. It is worth confirming that your available floor area accommodates the footprint comfortably, with sufficient clearance for access on both sides where possible.

This unit is well suited to smaller and mid-sized commercial kitchens, cafés, and food preparation businesses looking for reliable, low-maintenance storage. Sites requiring a larger shelving run or additional bays should look at add-on units designed to extend this system, or consider a heavier-duty shelving range if the load requirements are more demanding.

If you are unsure whether this unit is the right fit for your storage layout or whether a different configuration would serve you better, we are happy to talk it through.

The Cambro Camshelving Basics Plus starter unit is a four-tier, free-standing shelving system constructed from a lightweight composite plastic. It is designed for dry storage areas, walk-in refrigerators, and back-of-house stock rooms where a straightforward, practical shelving solution is needed without the cost of a fully specified stainless steel installation.

In a working kitchen environment, this type of shelving earns its place through reliability rather than complexity. The composite material does not rust or corrode, which makes it particularly well suited to areas prone to humidity or moisture — a common source of deterioration in shelving made from coated metal. The unit handles the day-to-day demands of ingredient storage, ambient dry goods, and general back-of-house organisation without requiring significant maintenance attention.

The practical advantages for kitchen operators are straightforward:

• Non-corrosive plastic construction withstands damp and refrigerated environments
• Shelf plates are dishwasher safe, reducing cleaning time during turnaround
• Lightweight build makes repositioning and reorganising storage areas manageable
• No coating to chip, peel, or rust over time
• Simple post-and-shelf assembly with no specialist tools required

As a starter unit, this comes ready to install as a standalone bay. Cambro's Camshelving Basics range is designed to be extendable, so additional shelving can be added over time as storage requirements grow. The footprint suits standard back-of-house and storage areas, though it is worth confirming the available floor space and overhead clearance before ordering.

This unit is well suited to smaller operations — cafés, delis, pub kitchens, and smaller catering environments — where a clean, hygienic storage solution is needed without over-specifying. For high-volume sites with heavier load requirements or greater storage demands, a more heavy-duty shelving system may be a better fit.

If you're unsure whether this unit is the right size or specification for your storage setup, our team is happy to talk it through with you.

The Cambro Camshelving Basics Plus is a four-tier freestanding shelving unit built from a lightweight composite plastic material. Unlike stainless steel racking, the non-corrosive construction means it won't rust when exposed to moisture, making it a practical choice for cold rooms, walk-in refrigerators, wash-up areas, and general dry storage environments where steel units often deteriorate over time.

In day-to-day kitchen use, the material holds up well under the repeated loading and unloading that comes with a busy service cycle. The shelf plates wipe down quickly and are dishwasher safe, which keeps cleaning straightforward and reduces the time your team spends on storage maintenance during or after service.

Key practical advantages for kitchen operators include:

• Non-corrosive plastic construction resists rust in damp or refrigerated environments
• Dishwasher-safe shelf plates simplify end-of-service cleaning routines
• Lightweight build makes repositioning and reconfiguration easier than steel alternatives
• Four-tier layout provides usable vertical storage within a compact footprint
• Starter unit configuration means additional sections can be added as storage needs grow

This unit requires no electrical or water connection and arrives as a starter unit, meaning it can be extended by adding further bay sections if your storage requirements increase. The plastic posts and shelves clip together without tools in most configurations, which makes installation and future reconfiguration straightforward. It is worth checking floor loading and available clearance before positioning, particularly in refrigerated rooms where space is often tighter than expected.

This shelving unit is well suited to smaller independent kitchens, cafés, and catering operations looking for reliable dry or chilled storage without the cost or maintenance demands of heavy-duty steel racking. For high-volume sites with substantial stock movement or very heavy load requirements, a heavier-duty shelving system may be more appropriate.

If you're unsure whether this unit is the right fit for your storage layout or environment, we're happy to talk it through before you order.

The Cambro Camshelving Basics Plus Starter Unit is an open-frame shelving system built from a lightweight composite plastic that resists corrosion, moisture, and the general punishment of a working commercial kitchen. As a starter unit, it arrives with everything needed to assemble a freestanding four-tier shelving run straight away, making it a practical choice where you need usable storage quickly without coordinating multiple components.

In busy back-of-house environments, the material holds up well against the damp and chemical exposure that causes metal shelving to corrode over time. The shelf surfaces wipe down easily during service and the individual shelf plates are dishwasher safe, which helps reduce cleaning time at the end of a shift and keeps storage areas compliant with hygiene requirements without much effort from the team.

Practical day-to-day advantages include:

• Non-corrosive construction suited to cold rooms, wash areas, and high-humidity storage
• Lightweight build that makes repositioning units straightforward without specialist equipment
• Dishwasher-safe shelf plates that speed up end-of-day cleaning routines
• Tool-free or minimal-assembly design typical of the Camshelving range
• Grey finish that is unobtrusive in most back-of-house environments

This is a floor-standing unit, so no wall fixings or structural modifications are needed. It is worth confirming that the floor surface is level before installation, as with any open shelving system. If you are planning a longer shelving run, add-on units can be connected to this starter unit to extend the configuration without duplicating the upright posts.

This unit is well suited to small and medium catering operations — cafés, pub kitchens, school catering facilities, and similar — where reliable, hygienic dry or ambient storage is needed at a sensible cost. For sites requiring heavier load capacities or larger shelf footprints, heavier-duty shelving options are available within the broader range.

If you are unsure whether this unit will suit your space or you are planning a larger shelving layout, the team is happy to talk it through with you before you order.

The Cambro Camshelving Basics Plus starter unit is a four-tier open shelving system designed for commercial storage environments. Built from a lightweight composite plastic, it provides a practical and cost-effective shelving solution for dry stores, walk-in refrigerators, and general back-of-house storage areas. As a starter unit, it includes everything needed to get a single bay up and running, with the option to add further units or accessories as storage requirements grow.

In a busy kitchen environment, the real advantage of this type of shelving is how it holds up under daily use. The plastic composite construction is non-corrosive, so it performs reliably in humid conditions such as walk-in cold rooms or areas that see regular washdown. It does not rust, splinter, or harbour moisture in the way that wire or timber shelving can, which matters when you are working to food hygiene standards day in, day out.

• Composite material resists corrosion in damp and humid storage areas
• Shelf plates are dishwasher safe, making end-of-day cleaning straightforward
• Lightweight construction makes reconfiguring shelf heights quick and practical
• Non-porous surface wipes clean between uses without specialist products
• Starter unit format allows the shelving run to be extended over time

Installation is straightforward — the unit is freestanding and requires no wall fixing, though it should be positioned on a level floor. There are no electrical or plumbing requirements. The plastic posts and shelves can be assembled without tools. Bear in mind that composite shelving of this type is well suited to lighter-to-medium storage loads; operators handling very heavy bulk goods may want to consider a heavier-duty shelving system with a higher load rating per shelf.

This unit is a practical choice for small to medium catering operations, care homes, school kitchens, and hospitality businesses looking to organise dry or refrigerated storage without a significant outlay. It is equally useful as supplementary shelving in a larger kitchen where existing storage is being reorganised or expanded.

If you are fitting out a new storage area or replacing an existing shelving run and are unsure of the right configuration for your space, we are happy to talk through your requirements.

This Cambro Camshelving Basics Plus add-on unit is designed to extend an existing Camshelving Basics Plus stationary run, adding four tiers of vented shelving without requiring a full second set of uprights. It ships with one post kit, eight traverses, and shelf plates, so it connects directly to an adjoining stationary unit and shares its posts rather than standing independently. That connection method keeps the footprint compact and preserves the full load-bearing capacity of the run — there is no structural compromise from adding on.

In practice, this makes it a practical choice for operators who are fitting out or reorganising a dry store, walk-in, or ambient storage area in stages. The ability to configure runs in a straight line, L-shape, or T-shape gives kitchens with awkward layouts reasonable flexibility when planning shelf positioning around existing fixtures. The vented shelf plates allow airflow around stored goods, which is particularly relevant in refrigerated or cool-store environments where circulation matters for food safety compliance.

From a day-to-day operational standpoint, the plastic construction resists rust and corrosion — a genuine advantage in environments that experience regular wet-cleaning or condensation. The shelf plates are removable and dishwasher safe, which simplifies the deep-cleaning routines that environmental health inspections require. Shelf height is adjustable without tools, so storage configurations can be changed as stock profiles shift.

• Plastic construction with no corrosion risk in humid or refrigerated environments
• Removable, dishwasher-safe shelf plates for straightforward deep cleaning
• Vented shelf surface supports airflow around stored goods
• Tool-free shelf height adjustment to suit changing stock requirements
• L-shape and T-shape configurations possible alongside straight-line runs

One important consideration: this is an add-on unit only. It cannot be installed as a freestanding shelf run — it must connect to a Cambro Camshelving Basics Plus stationary unit, which is sold separately. If your site requires a standalone starting unit or a complete new run, that stationary unit needs to be specified first. For very high-volume operations with heavier bulk storage requirements, it is worth considering whether a more heavy-duty shelving system would better suit the load profile before committing to this range.

If you are unsure how many add-on units your layout will accommodate, or whether this shelving range is the right fit for your storage environment, the team is happy to talk it through with you.

This is an add-on unit for the Cambro Camshelving Basics Plus range — designed to extend an existing stationary Camshelving Basics Plus unit rather than stand independently. It ships with one post kit, eight traverses, and the shelf plates needed to connect to an adjoining unit. The result is a four-tier, vented shelving bay that integrates cleanly into a straight-line run, or can be configured into an L-shape or T-shape layout to make better use of irregular or corner storage areas.

The vented shelf design allows air to circulate freely, which is particularly useful in refrigerated and frozen storage environments where airflow around product affects temperature consistency. The polymer construction is lightweight relative to equivalent steel shelving, which matters in practice when reconfiguring storage layouts between services or during a deep clean.

From an operational standpoint, Camshelving Basics Plus holds up well in the conditions that damage lesser shelving — high humidity, frequent washdowns, and temperature cycling between ambient and frozen environments. The polymer is resistant to rust and corrosion, and the shelf plates are removable and dishwasher-safe, which simplifies the kind of thorough cleaning that food safety standards require.

• Shelves adjust without tools, allowing quick reconfiguration as stock volumes change
• Vented design supports airflow in refrigerated and ambient dry storage
• Rust and corrosion resistant — suitable for wet, humid, or frozen environments
• Shelf plates remove and go through a commercial dishwasher
• Connects to existing Camshelving Basics Plus stationary units without reducing weight-bearing capacity

This unit is well suited to kitchens that already run Camshelving Basics Plus stationary bays and need to increase their storage footprint. It is not a standalone unit and will not connect to other Cambro shelving ranges. For sites needing a complete new installation, stationary units are the starting point, with add-ons used to build out from there.

If you are planning a storage layout and want to work out the right combination of stationary and add-on units for your space, our team is happy to talk it through before you order.

The Cambro Camshelving Basics Plus Add-On Unit is a four-tier vented shelving unit designed to extend an existing Camshelving Basics Plus stationary run. It ships as a complete kit — one post, eight traverses, and shelf plates — so it connects directly to an adjoining unit without requiring a full second post assembly. The vented shelf plates allow air to circulate freely, making this unit equally at home in a dry store, a walk-in chiller, or a freezer environment.

In a working kitchen, storage shelving takes considerable punishment. Cambro's polymer construction handles the damp, temperature-swinging conditions common to back-of-house areas without corroding or warping over time. The vented design also means spillages don't pool on shelf surfaces, which makes routine cleaning faster during and between service. Shelf plates are removable and dishwasher safe, so a thorough clean doesn't require dismantling the whole unit.

Key practical points worth noting:

• Add-on units connect only to Camshelving Basics Plus stationary units — not to other ranges
• Can be configured in a straight line, L-shape, or T-shape to suit the room layout
• No loss of weight-bearing capacity when units are joined in any configuration
• Shelf positions are adjustable without tools, so the layout can change as stock profiles change
• Lifetime warranty against rust and corrosion

Because this is an add-on rather than a standalone unit, it's worth confirming your existing Basics Plus stationary unit count and room dimensions before ordering. For very high-volume operations or areas with particularly demanding load requirements, heavier-duty shelving solutions may be worth considering alongside this range.

If you're planning a storage fit-out and want to talk through configuration options, the team is happy to help before you commit to an order.

This is an add-on unit for the Cambro Camshelving Basics Plus system — it extends an existing stationary bay rather than standing alone. It arrives with one post kit, eight traverses, and the shelf plates needed to connect it to an adjoining Camshelving Basics Plus stationary unit. The result is a continuous shelving run that gains square footage without sacrificing load capacity at the joining point.

In practice, Camshelving Basics Plus is widely used in dry stores, walk-in fridges, and freezer rooms where metal shelving can corrode or become difficult to clean. The polymer construction resists rust and moisture, and the vented shelf plates allow cold air to circulate freely — which matters in refrigerated storage where airflow affects temperature consistency. The material holds up well under sustained daily use without the surface degradation you see with lower-grade plastic alternatives.

From an operational standpoint, the key advantages are straightforward:

• Shelf plates are removable and dishwasher safe, making deep cleans quicker
• Shelf positions can be adjusted without tools, allowing the configuration to change as stock lines change
• Connects in a straight line, L-shape, or T-shape to suit the room layout
• Lightweight construction at 16.4kg makes repositioning manageable without additional labour
• Polymer build is unaffected by the humidity levels typical in cold rooms and freezers

Installation is straightforward — no fixings to floors or walls are required under normal use, and no electrical or plumbing connections are involved. The unit must connect to a Camshelving Basics Plus stationary unit; it cannot stand independently, so confirm you have a compatible stationary bay before ordering. For larger storage areas requiring multiple bays, it is worth planning the overall run before purchasing to ensure the configuration works within the available footprint.

This unit suits sites that already run Camshelving Basics Plus stationary bays and need to expand their storage capacity. It is a practical choice for small-to-medium kitchens, prep areas, and cold rooms where corrosion resistance and cleanability are priorities. Sites with very high-density storage requirements or heavier pallet-style loads may find a more heavy-duty shelving system better suited to the task.

If you are planning a storage fit-out or are unsure whether this add-on unit is compatible with your existing shelving, the team is happy to talk through the layout with you before you order.

This is an add-on shelving unit from Cambro's Camshelving Basics Plus range, designed to extend an existing Basics Plus stationary unit. It ships with one post kit, eight traverses, and the shelf plates needed to connect directly to an adjoining unit, so no additional hardware is required to get it into service. The vented shelf design allows air to circulate freely, which makes it well suited to chilled or freezer environments as well as ambient dry storage.

In practice, Camshelving Basics Plus is a reliable choice for back-of-house storage in kitchens that need flexible, durable racking without the weight and corrosion risk of traditional wire or steel shelving. The plastic construction means there is no risk of rust — useful in humid or wet storage areas — and the shelves can be repositioned without tools as storage requirements change over time. The shelf plates are removable and dishwasher safe, which makes periodic deep cleaning straightforward during quiet periods.

Key operational characteristics worth noting:

• Add-on configuration connects to existing Basics Plus stationary units only — not compatible with other Camshelving series
• Can be arranged in straight, L-shape, or T-shape runs without loss of load-bearing capacity
• Vented shelf plates support air circulation in chilled and freezer applications
• Shelf heights are fully adjustable without tools
• Plastic construction is corrosion-free and suitable for damp or cold environments

It is worth confirming your available floor space before ordering, particularly in tight dry stores or walk-in chillers where access around the unit matters. At 1480mm wide and 460mm deep, this is a substantial run of shelving — measure twice, especially if you are planning an L- or T-shape layout. The unit weighs 22.5kg unloaded, so positioning it is manageable for two people.

This unit is best suited to operations that already have a Camshelving Basics Plus stationary unit in place and need to increase storage capacity within the same footprint. For sites requiring a self-contained free-standing solution from the outset, a stationary unit would be the appropriate starting point. For very high-volume storage demands or environments with particularly heavy loads, it is worth considering whether a heavier-duty shelving system might be more appropriate.

If you are planning a larger storage layout or are unsure which combination of stationary and add-on units will work best for your space, we are happy to talk it through before you order.