Food Processor Grating and Pulping Discs

The Robot Coupe 27588 is a 1.5mm fine grating disc designed for use with compatible Robot Coupe food processors and combination machines. At this cut size it produces a fine, even grate from hard cheeses, firm vegetables, chocolate, and similar ingredients where a coarser disc would leave the wrong finish for the application.

Disc selection matters more in practice than it might first appear. The difference between a 1.5mm grate and a coarser alternative affects how an ingredient behaves in a finished dish — finely grated Parmesan that needs to melt into a sauce, or finely grated vegetable incorporated into a mix where coarser shreds would alter the texture of the end product. Having the correct disc means prep output is consistent from one service to the next, without secondary work to correct the result. Robot Coupe discs are built to handle the throughput demands of a busy prep kitchen, maintaining cut quality across repeated daily use rather than degrading after modest use as cheaper alternatives can.

• Consistent 1.5mm finish reduces the need for secondary preparation work
• Compatible across a wide range of Robot Coupe food processors and combination machines
• Hard-wearing construction maintains cut quality through sustained daily use
• Quick disc swap keeps changeover time between prep tasks to a minimum

Confirmed compatibility includes the R101, R201, R211, R301, R401, R402, and CL40 models, though it is worth verifying your specific machine model before ordering. Robot Coupe produce several disc ranges and not all discs are interchangeable across different machine families — a quick check at the point of ordering avoids a wasted trip to the supplier.

If you are unsure whether this disc suits your machine or your prep requirements, we are glad to help confirm the right choice before you order.

The Robot Coupe 27079 is a 1mm grating disc designed for fine-grating dense, fibrous ingredients — horseradish being the most common application. It fits a broad range of Robot Coupe bowl cutter and continuous-feed machines, making it a practical addition to any kitchen already running compatible Robot Coupe equipment in the prep section.

Grating horseradish or similar root vegetables by hand in any real volume is time-consuming and produces inconsistent results between batches. A dedicated 1mm disc delivers a uniform fine texture on every pass, which matters when you are prepping ahead of service and need that consistency to carry through into sauces, condiments, or garnishes. Using the correct cut rather than a coarser alternative also affects how the ingredient integrates into a finished dish, so it is worth having the right disc to hand rather than working around a compromise.

• Delivers a consistent 1mm fine grate, reducing variation across prep batches
• Purpose-built for dense root vegetables and fibrous ingredients
• Compatible with a wide range of Robot Coupe bowl cutter and continuous-feed models
• Quick to fit and swap out during prep changeovers
• Straightforward to clean and store alongside other discs in your accessories set

Confirmed compatible models include the R101, R201, R211, R301, R401, R402, and CL40, among others. That said, disc fitment can vary between production runs within the same Robot Coupe range, so it is worth checking your specific model and generation before ordering — particularly if you are running an older or less common variant.

This disc is well suited to kitchens that regularly prep horseradish or fine-grated root vegetables as part of their menu and already operate a compatible Robot Coupe machine. It is a single-purpose accessory, so if your kitchen also needs a broader range of fine-grate work across different ingredients, it is worth reviewing the wider Robot Coupe disc range at the same time to cover your prep requirements in a single order.

If you would like to confirm compatibility with your existing machine before ordering, or want guidance on which other discs would work alongside this one, we are happy to talk it through.

The Robot Coupe 27764 is a genuine parmesan grating disc designed to fit the disc hub of compatible Robot Coupe food processors and vegetable preparation machines. It produces a fine, consistent grate profile suited to hard cheeses such as parmesan and grana padano, and is confirmed compatible with the R101, R201, R211, R301, R401, R402 and CL40 models.

Hard cheeses behave differently under a cutting disc than softer produce. Without the correct grating profile, results tend to be uneven — either too coarse or prone to clogging — which creates inconsistency across a service. Because this disc is engineered to the tolerances of the Robot Coupe platform, it works cleanly within the machine rather than fighting against it. For kitchens that regularly finish pasta dishes, gratins, or risottos, processing hard cheese by machine rather than by hand makes a practical difference across multiple covers.

• Produces fine, consistent results from hard cheeses including parmesan and grana padano
• Genuine Robot Coupe accessory, built to exact machine tolerances
• Fits directly into the disc hub with no tools required for changeover
• Reduces manual prep time during busy service periods
• Confirmed compatible with R101, R201, R211, R301, R401, R402 and CL40

There is nothing to install beyond fitting the disc to a compatible machine. The one practical check worth making before ordering is confirming your machine model. Robot Coupe's disc range spans several hub configurations, and not all discs are interchangeable across the full product line — the 27764 is specific to the models listed above.

This disc suits kitchens that work with hard cheese regularly and already operate one of the compatible Robot Coupe machines. If you are unsure whether it will fit your model, or if you are looking to build out your disc set for a wider range of prep tasks, we are happy to work through the options with you.

The Robot Coupe 27511 is a 3mm fine grating disc designed to work with a range of Robot Coupe bowl cutter and vegetable preparation machines, including the R101, R201, R211, R301, R401, R402, and CL40. It produces a uniform fine grate across firm ingredients — hard cheeses, carrots, courgettes, and similar produce where a finer texture is specifically required rather than a coarser shred or rough cut.

In a busy prep kitchen, having the right disc to hand means teams can move through volume prep efficiently without compromising on the finished result. A 3mm grate is particularly relevant where consistency matters across a high number of covers — gratins, fine garnishes, and dishes where a specific texture needs to be replicated reliably service after service. Robot Coupe discs are manufactured to close tolerances, which supports repeatable output through heavy daily use rather than degrading quickly under sustained prep volumes.

• Produces a fine, uniform 3mm grate from hard cheeses and firm vegetables
• Manufactured to close tolerances for consistent, repeatable results over time
• Quick to swap between tasks during or between service periods
• Straightforward to remove, clean, and store as part of a wider disc set
• Compatible with several common Robot Coupe R-series and CL40 machines

Before ordering, confirm compatibility with your specific machine model and serial range. The machines listed above represent the most common configurations this disc is supplied for, but older variants or less common builds are worth verifying. As with all precision-ground cutting discs, handle and store with care — contact with hard surfaces can affect edge quality over time.

This disc suits any kitchen already running a compatible Robot Coupe machine that regularly preps fine-grated ingredients in volume. If you are building out a fuller disc set or want to confirm this is the right fit for your machine, we are happy to talk it through.

The Robot Coupe 27577 is a genuine 2mm fine grating disc designed for use with a range of Robot Coupe bowl and continuous-feed food processors, including the R101, R201, R211, R301, R401, R402, and CL40. It is a straightforward addition or replacement for kitchens already running compatible Robot Coupe prep equipment.

At 2mm, this disc is suited to prep work where a fine, consistent result matters. Hard cheeses, chocolate, raw root vegetables, and fresh breadcrumbs are among the most common applications. During a busy prep session, the difference between hand-grating and machine-grating at this size is considerable — both in the speed of the task and in the uniformity of the finished product. Where texture is relevant to the dish, that consistency is worth having across a whole batch.

Being a genuine Robot Coupe accessory, the disc is manufactured to the tolerances required for correct fit and reliable performance with compatible machines. Using the correct part also reduces unnecessary strain on the processor motor over repeated use, which matters on equipment that earns its keep through daily service.

• Produces a consistent 2mm fine grate across hard cheeses, vegetables, and chocolate
• Genuine Robot Coupe part — correct fit and tolerances for compatible machines
• Quick to swap between disc types during a prep session
• Reduces motor strain compared with using an incorrect or worn disc
• Compatible with several Robot Coupe bowl and continuous-feed processor models

It is worth confirming your machine model before ordering. Robot Coupe produces several disc ranges across their equipment line and not all discs are interchangeable between models. If you are unsure whether this disc is the right fit for your machine, or want to talk through which grating size suits a particular prep requirement, the team is happy to help you work it out before you order.

The Robot Coupe 27078 is a genuine 0.7mm fine pulping plate designed for use with a range of Robot Coupe bowl cutters and vegetable preparation machines, including the R101, R201, R211, R301, R401, R402, and CL40. It serves either as a direct replacement for a worn plate or as an additional plate where operators need to switch between output textures depending on the preparation task.

The 0.7mm perforation produces a very fine, smooth output — finer than standard pulping plates. This makes it the appropriate choice for smooth fruit and vegetable coulis, baby food production, allergen-sensitive preparations, and modified texture diets where particle size needs to be tightly controlled. It is not the right choice where some texture is desirable; for those applications, a coarser plate would be more appropriate.

As a genuine Robot Coupe component, it is manufactured to the tolerances of the original equipment. In practical terms this matters: non-genuine or off-specification plates can produce inconsistent output and may increase wear on the machine over time, particularly at high throughput volumes.

• Produces consistently fine, smooth output suitable for controlled-texture requirements
• Genuine component ensures correct fit and maintains machine performance
• Compatible across several R-series and CL40 models, reducing the need for separate equipment
• Straightforward to swap between plates where multiple output textures are needed in service

Before ordering, it is worth confirming your exact machine model. Robot Coupe produces plates across several diameter specifications and not all plates are interchangeable between models. If you are unsure whether the 0.7mm perforation is the right choice for your intended application, we are happy to talk it through before you order.

The Robot Coupe 27632 is a 9mm extra coarse grating disc designed to fit a range of Robot Coupe bowl and continuous-feed processors, including the R101, R201, R211, R301, R401, R402, and CL40. It is a straightforward replacement or additional disc for kitchens already running compatible Robot Coupe equipment, with no adapters or additional hardware required.

At 9mm, this disc produces a noticeably coarser result than standard grating options. That distinction matters in practice — a coarse grate on hard cheese behaves differently on a gratin than a fine one, and root vegetables grated at this size retain more structure during cooking. For batch prep, the disc delivers consistent results across the full volume, which hand-grating rarely achieves reliably under pressure.

• Consistent 9mm coarse grate across hard cheeses, root vegetables, and firm bread
• Drops directly into compatible Robot Coupe processors with no additional equipment
• Straightforward to remove, clean, and store between prep sessions
• Reduces hand-prep time during high-volume pre-service preparation
• Keeps texture consistent across large batches where hand-grating varies

Having a dedicated coarse disc available means kitchens can move between prep tasks without compromising on texture or losing time swapping between sizes mid-service. It is a practical addition for any kitchen running Robot Coupe equipment across multiple prep applications.

It is worth confirming your processor model before ordering — this disc is compatible with a broad range of Robot Coupe units, but not the entire range. If you are unsure whether it suits your machine, or you are building out a disc set to cover different prep tasks, the team is happy to work through the options with you.

The Robot Coupe 27046 is a genuine 6mm coarse grating disc designed to fit directly into compatible Robot Coupe food processors, including the R101, R201, R211, R301, R401, R402, and CL40. It mounts into the bowl or feed head of these machines and produces a uniform coarse grate across a wide range of ingredients — most commonly hard and semi-hard cheeses, root vegetables, courgette, and block chocolate.

A 6mm grate sits at a practical midpoint for prep work: coarse enough to retain texture and presence in a finished dish, yet consistent enough to integrate cleanly into gratins, toppings, salads, and baked goods. In a busy kitchen, that consistency across large batches is where a correctly specified disc proves its value — hand grating at volume is slow and introduces variation, and swapping discs on these machines takes only seconds.

• Delivers consistent 6mm grate across repeated batches without manual variation
• Faster throughput than hand grating, particularly useful during prep service
• Reduces repetitive strain during high-volume preparation tasks
• Swaps quickly with other discs on compatible Robot Coupe models
• Genuine Robot Coupe accessory, manufactured to machine tolerances

Disc fitment is not universal across the Robot Coupe range, so it is worth confirming your exact model number before ordering. Purchasing the wrong disc for your machine is a straightforward mistake to avoid with a quick check. If you are working across multiple Robot Coupe units or are unsure whether this disc suits your prep requirements, our team is happy to help work through the compatibility.