Lids and Spares

These are replacement lids for Churchill's Stonecast 443ml teapots in the Sage Green colourway. If lids are lost or broken in service — as they commonly are in busy café and hospitality environments — this pack of six allows operators to replenish stock without replacing entire teapot sets.

Churchill's Stonecast range is hand-decorated with a fine speckle finish and a subtly rustic edge, meaning each piece carries a small degree of natural variation. The Sage Green tone sits comfortably within earthy, natural, or botanical front-of-house aesthetics, and works well in settings where tableware presentation is part of the overall guest experience.

Made from Churchill's super vitrified ceramic body, these lids are built to handle the demands of professional use. Super vitrified ware is harder and more resistant to chipping than standard ceramics, which matters when items are being handled at volume across multiple sittings each day. The lids are both dishwasher and microwave safe, which simplifies back-of-house processes considerably.

• Suitable for high-throughput dishwasher cycles without degrading the finish
• Microwave safe, supporting warming service where required
• Hand-decorated finish adds character to beverage presentation
• Sold in a pack of six, practical for stocking spares in busy operations

These lids are specific to the Churchill Stonecast 443ml teapot. Before ordering, it is worth confirming you have the correct teapot size and colourway in your current set. If you are building out a full Stonecast Sage Green beverage service or are unsure about compatibility, our team is happy to help you work through what you need.

These are replacement lids for Churchill's Stonecast 443ml teapots in the Nutmeg Cream colourway. They are a straightforward like-for-like replacement — useful when lids are lost or broken during service, allowing operators to keep existing Stonecast teapots in active use rather than replacing the whole piece.

Churchill's Stonecast range is widely used in cafés, hotel lounges, restaurants, and tearoom settings where presentation matters. The hand-decorated finish with fine speckle detail gives each lid a degree of natural variation, which suits informal and rustic table settings as well as more considered beverage presentations. The Nutmeg Cream tone sits comfortably alongside neutral and earthy table schemes.

Made from Churchill's super vitrified ceramic body, the lids are built to withstand the rigours of daily commercial use. Key practical points include:

• Dishwasher safe — suitable for high-cycle commercial dishwashers
• Microwave safe — allows reheating without removing the lid
• Super vitrified construction — resists chipping better than standard ceramic under everyday handling
• Consistent glaze finish — maintains presentation across a matched set

These lids are designed specifically for the Churchill Stonecast 443ml teapot and are not interchangeable with other sizes or ranges. It is worth confirming the teapot size in your existing stock before ordering, particularly if you have multiple Stonecast teapot sizes in service.

Sold in packs of six, they are well suited to venues that run a reasonable number of teapots and want to maintain a consistent look across their beverage service. If you are building out a full Stonecast beverage set or need guidance on quantities for your operation, the team is happy to help.

These are the dedicated replacement lids for Churchill's Stonecast Java Blue 443ml teapots. Sold in packs of six, they are a practical solution for operators who need to replenish lids lost or damaged through the normal course of a busy service — without having to replace the teapots themselves.

Churchill's Stonecast range is hand-decorated with a characteristic speckled finish and a lightly rustic edge, which means each piece carries subtle individual variation. The Java Blue colourway is a mid-toned, understated blue that works well on dressed tables without feeling overstated. In a café, hotel, or restaurant setting where tableware presentation matters, maintaining a complete, matched set keeps the service looking considered.

Made from Churchill's super vitrified ceramic body, these lids are built to handle the repeated handling, stacking, and dishwasher cycles that are inevitable in a professional environment. Super vitrified ware is meaningfully more resistant to chipping than standard ceramic, which is relevant when lids are handled at pace during service or washed in high-temperature commercial dishwashers. They are also microwave safe, which is useful where teapots are used to warm water or maintain temperature mid-service.

• Genuine Churchill replacement lids — a matched fit for the 443ml Stonecast Java Blue teapot
• Dishwasher safe for commercial machines
• Microwave safe
• Hand-decorated finish with natural variation between pieces
• Super vitrified construction for improved chip resistance in daily use

If you are building a new Stonecast Java Blue teapot set or assessing how many lids to hold in reserve for a busy café or hotel breakfast service, it is worth thinking about the realistic attrition rate across your service periods. We are happy to help you work out the right quantity to keep on hand.

These are replacement lids for the William Edwards Quanta 2-cup oval teapot, supplied in a pack of six. Finished in bone china with a white-on-white embossed design and copper mica detailing, they match the Quanta collection's distinctive geometric aesthetic and are intended for use alongside the corresponding teapot body.

In a busy front-of-house setting, lids take more handling than almost any other piece of hollowware — lifted, set aside on saucers, replaced under pressure during service. The Quanta lids are made from bone china with a 47% bone ash content, which gives a better strength-to-weight ratio than standard ceramics and reduces the likelihood of chipping during routine service. The stain-resistant glaze helps maintain a clean appearance across repeated use without requiring excessive attention between seatings.

• Bone china construction with 47% bone ash for improved chip resistance
• Stain-resistant glaze maintains appearance through heavy daily use
• Dishwasher safe for straightforward back-of-house cleaning
• White-on-white embossed design with copper mica detailing
• Supplied in a pack of six to support ongoing replacement stock

There are no special installation or storage requirements, though as with all bone china, stacking without appropriate protection risks surface marking over time. Selling in sixes makes it practical to hold a small reserve, which most operators running a formal tea service will find useful.

These lids are well suited to hotels, restaurants, and tearooms where the Quanta range is already in use and where presentation standards require consistent, matched tableware. If you are considering introducing the Quanta collection or need guidance on quantities for your service volume, the team is happy to help you work through the options.

These are replacement porcelain lids designed specifically for the Churchill Sandringham 852ml teapot. If you run a café, hotel breakfast service, or any hospitality operation where teapots see regular daily use, lids are among the most frequently damaged or misplaced items on the pass — this pack of six allows you to maintain a full, presentable service without waiting on individual replacements.

Porcelain construction means the lids match the durability and finish of the teapots themselves, holding up well to repeated commercial dishwasher cycles. Because they are manufacturer-matched components, the fit is consistent and the glaze colour remains true to the original Sandringham range, keeping your table presentation uniform.

• Exact fit for Churchill Sandringham 852ml teapots
• Porcelain construction suited to commercial dishwasher use
• Pack of six supports ongoing replacement without overstocking
• Consistent glaze and finish matches the existing Sandringham range

It is worth confirming which teapot size you are running before ordering — Churchill produces the Sandringham range in more than one capacity, and lids are not interchangeable across sizes. If you are unsure whether this lid fits your current stock, our team is happy to help you confirm compatibility before you order.

These are replacement lids for the Steelite Simplicity teapot range, sold in a pack of twelve. Made from alumina vitrified ceramic, they share the same material construction as the teapots themselves, which means consistent durability and a matched finish across the table setting.

In a busy food service environment, teapot lids are among the more frequently misplaced or chipped items on a trolley. Having a stock of spares means a broken lid does not put a teapot out of service, and the pack quantity is practical for operations running multiple covers or managing high table turnover.

• Domed profile helps retain heat and supports aroma during service
• Pinhole opening assists controlled, even pouring
• Large handle aids grip and contributes to the Simplicity range's distinctive appearance
• Alumina vitrified ceramic construction resists chipping under regular commercial use
• Rated for commercial dishwasher cycles

These lids are designed specifically for the Steelite Simplicity teapot and are not interchangeable with other ranges. It is worth confirming you are running the Simplicity range before ordering, particularly if your current teapots were sourced some time ago and you are uncertain of the model.

Well suited to hotels, restaurants, cafés, and contract catering operations that serve table tea as a standard part of the beverage offer. The pack of twelve makes these a sensible choice for any venue wanting to maintain a complete set of matched crockery without overstocking.

If you are unsure whether these fit your current teapots, or you are looking to build out a full Simplicity tableware set, the team is happy to help you check compatibility before you order.

These are replacement classic lids designed specifically for the William Edwards Hive four-cup teapot (AND0415). Made from bone china, they carry the hand-painted Hive pattern — a design drawn from the flora and fauna of tea-growing regions — making them a natural fit for formal afternoon tea service or any setting where the full Hive collection is already in use.

In a busy front-of-house environment, lids are among the first pieces to get chipped or lost. Having a reliable stock of matched replacements means a broken lid doesn't take a teapot out of service or leave a mismatched piece on the table. Sold in packs of 12, this format suits operators who run regular afternoon tea covers or who need to maintain consistent presentation across a larger set of teapots.

Bone china is well suited to formal table settings — it presents well and handles the repeated hot-water cycles of a tea service without issue, though it does require careful handling during washing and storage to avoid chipping the decorated glaze.

If you're building or replenishing a full Hive service and want to confirm quantities or check compatibility with your existing teapot stock, the team is happy to assist.

Pack Quantity: 12 Hand-decorated in Stoke-on-Trent, these tea-for-one teapot lids are part of William Edwards ever-popular Sultan's Garden collection. They feature deep blue patterns of exotic wildlife and paradisical gardens and are crafted from white bone china.

These are replacement lids for the William Edwards Sultan's Garden two-cup oval teapot, sold in a pack of six. Hand-decorated in Stoke-on-Trent, they are made from white bone china and carry the distinctive deep blue Sultan's Garden pattern — a design featuring exotic wildlife and ornamental garden imagery that has made this collection a consistent choice in upscale hospitality settings.

In busy tea service environments, lids are the component most likely to need replacing over time. Having a stock of spares on hand means a cracked or chipped lid does not take a teapot out of service, and the pattern match ensures continuity of presentation across the table. The hand-decorated finish means each piece carries the same considered quality as the original.

This pack is well suited to hotels, afternoon tea venues, and restaurants already using the Sultan's Garden range who want to maintain full sets without replacing entire teapots. If you are building out a new service or need guidance on quantities relative to cover numbers, the team is happy to advise.

These are replacement and spare lids for the Steelite Simplicity Harmony 310ml teapot range. Sold in packs of 12, they are made from alumina vitrified ceramic — the same material used across the Simplicity range — which gives them good resistance to the everyday knocks and handling that come with busy food service environments.

In a working service context, lids are among the most frequently replaced items in any crockery set. Having a stock of spares on hand avoids the common problem of mismatched or missing lids during service, which can affect both presentation and heat retention. The ceramic construction means these lids perform well in dishwashers and microwaves without degrading over time, which matters in high-throughput operations where crockery cycles through rapidly.

• Consistent white finish that sits cleanly within casual dining, hotel breakfast, and café settings
• Dishwasher and microwave safe for straightforward day-to-day handling
• Backed by Steelite's lifetime edge chip warranty for ongoing serviceability

These lids are suited to any operator already running the Steelite Simplicity Harmony 310ml teapot. They are a straightforward stock item for hotel breakfast operations, cafés, pub restaurants, and contract catering where maintaining a complete and presentable tea service matters. If you are unsure whether these lids are compatible with your existing teapots or need guidance on building out a crockery set, the team is happy to help.

These replacement lids are made specifically to fit the Steelite Monaco White 852ml teapot. Sold in a pack of twelve, they are a practical solution for operations that experience regular lid breakages or need to maintain a consistent front-of-house appearance without replacing complete teapot units.

Monaco White is constructed from alumina vitrified ceramic, a material chosen for its resistance to chipping, crazing, and the thermal stresses that come with repeated commercial use. The body has a notably bright, clean white finish with a degree of translucency that keeps it looking well on table in fine dining and quality casual settings alike. Steelite back the range with a lifetime edge chip warranty, which reflects confidence in the durability of the material under everyday service conditions.

Buying lids separately rather than full teapot units makes practical sense in higher-volume outlets where lids are statistically the most vulnerable component. Having spares in stock means a chipped or broken lid does not take a teapot out of service mid-shift.

• Maintains a uniform table presentation without replacing full teapot sets
• Alumina vitrified construction handles the thermal cycling of busy service
• Lifetime edge chip warranty provides long-term confidence in the range
• Pack of twelve suits establishments that want a practical stock of spares

These lids are suited to hotels, restaurants, and catering operations already using the Monaco White 852ml teapot. If you are looking to introduce the range from scratch, or if you need a more robust or larger-format teapot for high-volume service, it is worth reviewing the broader teapot range before committing.

If you are unsure whether these lids are the right fit for your current teapots, the team is happy to help confirm compatibility before you order.

These replacement lids are made specifically to fit the Steelite Monaco White 412ml teapot, sold in packs of twelve. They are produced in alumina vitrified ceramic — the same material as the teapots themselves — which gives the Monaco range its combination of a bright, clean white appearance and the robustness expected in a working catering environment.

In a busy front-of-house setting, lids are among the most frequently replaced pieces of tableware. They are handled repeatedly during service, stacked during washing, and occasionally dropped. Having a stock of spares on hand keeps teapot sets consistent in appearance and avoids the need to retire a serviceable pot simply because the lid is damaged or missing.

• Alumina vitrified ceramic construction resists chipping and cracking under daily handling
• Designed to match the Monaco White range for a uniform presentation on the table
• Lifetime edge chip warranty provides reassurance for high-turnover operations
• Pack of twelve supports ongoing stock management without frequent reordering
• Suitable for commercial dishwasher use in line with the wider Monaco collection

These lids are suited to hotels, restaurants, cafés, and contract catering operations that use the Steelite Monaco White teapot as part of their standard tableware. They are a straightforward stock item rather than a complex purchasing decision, though it is worth confirming the teapot size you are running before ordering to ensure compatibility.

If you are unsure whether these lids are the right fit for your current teapots, or if you are looking to build out a fuller Monaco White service, our team is happy to help you work through what you need.

This is the replacement lid for the Churchill Isla beverage pot, sold in packs of six. Finished in white with the dappled coastal-inspired surface texture that characterises the Isla range, these lids are made from super vitrified china — the same material used across the Isla collection — which gives them a harder, more chip-resistant finish than standard vitrified ware.

In a busy café or restaurant environment, lids take more handling than almost any other piece of tableware. They are lifted, set down on hard surfaces, and stacked repeatedly throughout service. Having a stock of spares on hand means a damaged or missing lid does not put a pot out of use during a busy period, and it keeps your table presentation consistent without needing to replace the pot itself.

These lids are well suited to any operation already running the Churchill Isla beverage pot as part of their table service or counter service setup. If you are considering the Isla range for the first time, it is worth reviewing the full collection to confirm the pot and lid combination works for your service style before ordering multiples.

If you are unsure whether this lid is compatible with your existing Isla pots, or you would like guidance on building out a consistent crockery specification, feel free to get in touch — we are happy to help you work through the detail.

These are the replacement lids for the Churchill Alchemy Ambience 511ml teapots, sold in a pack of six. Manufactured in porcelain to match the original teapot body, they maintain a consistent table presentation and are a practical solution when lids are lost or damaged in the course of normal service.

In busy front-of-house environments, teapot lids are among the more frequently misplaced or chipped pieces of tableware. Having a stock of replacements on hand avoids the need to retire serviceable teapot bodies prematurely, which makes straightforward sense from a cost and stock management perspective. The porcelain construction and durable glaze align with the finish of the Ambience range, so replacement lids sit neatly alongside existing service pieces without any visible mismatch.

These lids are suited to hotels, restaurants, cafés, and any operation running the Alchemy Ambience 511ml teapot as part of their beverage service. They are not a universal fit — they are designed specifically for the 511ml Ambience teapot body, so it is worth confirming the teapot model in your current stock before ordering.

If you are unsure whether these lids are compatible with the teapots you are using, or if you need guidance on building a complete Alchemy Ambience beverage service, feel free to get in touch with the team.

These are the replacement lids for the Churchill Alchemy Ambience 710ml teapot range. Made from the same porcelain as the teapots themselves, they are designed to maintain a consistent finish across the table — useful where a mismatched or damaged lid would stand out during a formal service.

In busy hospitality environments, teapot lids are one of the more frequently replaced smallwares items. They are handled repeatedly during service, cleared quickly under pressure, and passed through commercial dishwashers many times over. Having a reliable stock of spares means a damaged lid does not take a teapot out of service or disrupt the look of the table.

• Porcelain construction consistent with the Ambience teapot range
• Durable glaze for a smooth, easy-to-clean surface
• Sold in packs of six — practical for building a spare stock
• Suited to formal dining, hotel breakfast service, and afternoon tea covers

These lids are produced specifically for the 710ml Ambience teapot. They will not be a universal fit across other Churchill teapot ranges, so it is worth confirming you have the correct teapot model before ordering.

If you are unsure whether these match your current teapots, or you are looking to build out a wider Alchemy Ambience beverage range, we are happy to help clarify before you order.

These are replacement lids for the Churchill Alchemy Ambience 426ml teapot, sold in a pack of six. Made from the same porcelain as the teapot body, they are designed to sit flush and retain heat during table service. The Ambience range sits within Churchill's finer china offering, so the lids carry the same durable glaze finish as the pots themselves — consistent in appearance and practical for front-of-house use.

In a busy café, hotel breakfast service, or restaurant setting, teapot lids take more handling than almost any other piece of tableware. Having a supply of replacements to hand avoids gaps in service when breakages occur, which is a routine consideration in high-turnover environments. Porcelain holds up well in commercial dishwashers, and the glazed surface resists staining and is straightforward to clean.

A few points worth bearing in mind: these lids are matched specifically to the 426ml Ambience teapot and are not interchangeable with other Churchill teapot sizes or ranges. If you operate a mixed range of teapot capacities, it is worth confirming which size applies before ordering. The pack-of-six format suits operations that want to keep a working stock of spares without over-ordering.

If you are unsure whether these are the right fit for your current teapots, or need guidance on quantities for your service volume, we are happy to help you work that out.