Kubus Drop In Slimline Multideck 900mm product image

Kubus

Kubus KPC9ASHT Drop-In Slimline Multideck 900mm Assisted Service

SKU: CW651

£5,033.00(£6,039.60 inc VAT)
Get a quote

Request a callback

Leave your details and we will call you back about Kubus KPC9ASHT Drop-In Slimline Multideck 900mm Assisted Service.

Delivery Information

Price Match

  • In the event of equipment failure any parts needed will be provided 1
  • In the event of equipment failure an engineer will be sent for an onsite repair 1

The Kubus KPC9ASHT is a drop-in slimline multideck refrigeration unit designed to sit within a prepared counter or service structure. It presents chilled product across three shelves in a 900mm-wide footprint and operates on an assisted-service basis — customers or staff select from the front, while restocking and access are managed through a rear door. The temperature range of -1°C to 5°C makes it appropriate for sandwiches, patisserie, cold deli items, and similar short-shelf-life chilled products.

In continuous-service environments, the rear-door access arrangement is a practical advantage: staff can replenish product during service without disrupting the customer-facing display or opening the front of the cabinet. Diffused overhead lighting presents product cleanly without the harshness that can detract from visual merchandising. Point-of-sale label strips on each shelf support quick pricing and identification, which is useful in operations where the range turns over regularly.

A few operational features are worth noting:

  • Removable deck plates in the cold well simplify end-of-day cleaning
  • An integral condensate evaporator removes the need for a site drainage connection
  • Digital temperature display gives staff a clear, at-a-glance read on cabinet performance
  • R290 refrigerant carries a significantly lower global warming potential than older alternatives
  • The slimline depth suits counters where space is constrained without sacrificing shelf capacity

This unit must be specified at the counter design stage — it requires a prepared aperture sized to its footprint and cannot practically be retrofitted into an existing structure. At 190kg, positioning will require appropriate handling equipment and a level, load-bearing surface. There is no drainage requirement, but electrical supply and ventilation clearances should be confirmed with your installer prior to ordering. This is a special-to-order product and is non-returnable, so confirming the full specification before committing is important.

The KPC9ASHT is well suited to cafés, hotel breakfast counters, patisseries, delicatessens, and food-to-go operations where a well-presented chilled display is central to the service offer. The 900mm width suits medium-footprint counters; sites needing greater linear display capacity should consider wider configurations within the same range.

Given the bespoke nature of the order, it is worth talking through the counter build and service requirements with us before finalising your specification.

Frequently asked questions

Does this unit need to be built into a counter, or can it stand alone?

The KPC9ASHT is a drop-in unit and must be set into a prepared counter aperture — it is not freestanding. The aperture dimensions need to be designed around the cabinet's footprint, so this unit should be specified before the counter is built or fabricated rather than selected afterwards.

Is there a drainage connection required on site?

No. The unit incorporates an integral condensate water evaporator, which removes the need for a site drainage point. This simplifies the counter build and reduces the services that need to be run to the installation position, though you should still confirm electrical supply and ventilation requirements with your installer.

What type of operation is this unit best suited to?

It is most commonly used in cafés, delicatessens, hotel breakfast counters, patisseries, and food-to-go operations where chilled product presentation is a core part of the service offer. The 900mm width suits medium-footprint counters well; for sites with higher display volume requirements, wider configurations in the same range may be more appropriate.
Kubus KPC9ASHT Drop-In Slimline Multideck 900mm Assisted Service

£5,033.00(£6,039.60 inc VAT)

£5,033.00(£6,039.60 inc VAT)

The Kubus KPC9ASHT is a drop-in slimline multideck refrigeration unit designed to sit within a prepared counter or service structure. It presents chilled product across three shelves in a 900mm-wide footprint and operates on an assisted-service basis — customers or staff select from the front, while restocking and access are managed through a rear door. The temperature range of -1°C to 5°C makes it appropriate for sandwiches, patisserie, cold deli items, and similar short-shelf-life chilled products.

In continuous-service environments, the rear-door access arrangement is a practical advantage: staff can replenish product during service without disrupting the customer-facing display or opening the front of the cabinet. Diffused overhead lighting presents product cleanly without the harshness that can detract from visual merchandising. Point-of-sale label strips on each shelf support quick pricing and identification, which is useful in operations where the range turns over regularly.

A few operational features are worth noting:

  • Removable deck plates in the cold well simplify end-of-day cleaning
  • An integral condensate evaporator removes the need for a site drainage connection
  • Digital temperature display gives staff a clear, at-a-glance read on cabinet performance
  • R290 refrigerant carries a significantly lower global warming potential than older alternatives
  • The slimline depth suits counters where space is constrained without sacrificing shelf capacity

This unit must be specified at the counter design stage — it requires a prepared aperture sized to its footprint and cannot practically be retrofitted into an existing structure. At 190kg, positioning will require appropriate handling equipment and a level, load-bearing surface. There is no drainage requirement, but electrical supply and ventilation clearances should be confirmed with your installer prior to ordering. This is a special-to-order product and is non-returnable, so confirming the full specification before committing is important.

The KPC9ASHT is well suited to cafés, hotel breakfast counters, patisseries, delicatessens, and food-to-go operations where a well-presented chilled display is central to the service offer. The 900mm width suits medium-footprint counters; sites needing greater linear display capacity should consider wider configurations within the same range.

Given the bespoke nature of the order, it is worth talking through the counter build and service requirements with us before finalising your specification.