Maidaid UT132e 1320 x 700mm Rack Utensil product image
Maidaid U132e Utensil Washer, Dishwashers, Advantage Catering Equipment

Maidaid

Maidaid UT132e 1320 x 700mm Rack Utensil Washer

SKU: UT132e

£15,917.00(£19,100.40 inc VAT)
Get a quote

Request a callback

Leave your details and we will call you back about Maidaid UT132e 1320 x 700mm Rack Utensil Washer.

Delivery Information

Price Match

  • In the event of equipment failure any parts needed will be provided 1
  • In the event of equipment failure an engineer will be sent for an onsite repair 1
  • Equipment can be connected to a three phase power supply – must be installed by a competent person
  • Equipment that should be connected to a suitably rated outlet - must be installed by a competent person
  • Item weighs over 100kg and will need care and planning to get into position kg

The Maidaid UT132e is a rack-type utensil washer built specifically for the pot wash end of a commercial kitchen. Where standard pass-through or undercounter dishwashers fall short — deep stockpots, full-size gastronorm trays, baking sheets, roasting tins, and the oversized utensils that pile up during busy service — this machine is designed to cope. The generously sized wash chamber accommodates items that simply would not fit elsewhere.

Pot wash is one of the most consistent sources of service bottlenecks in high-volume kitchens. The UT132e uses dual vertically mounted wash pumps to deliver thorough mechanical action across the full rack, which reduces the need for extended soaking of heavily soiled items. Eleven selectable wash cycles give operators the flexibility to match cycle length to the level of soiling — useful for maintaining throughput at peak times without over-running chemicals and water during quieter periods.

In day-to-day operation, several design features make a practical difference:

  • Split door design makes loading and unloading straightforward, even with bulky items
  • Soft-touch electronic controls require minimal staff training to operate confidently
  • Onboard chemical dosing pumps are fitted as standard, removing the need for separate external dosing units
  • Gravity waste system reduces mechanical complexity and simplifies servicing
  • Double-wall stainless steel construction stands up to sustained heavy use

Installation requires a dedicated plumbing supply and waste connection. The gravity drain means the machine must be sited with an adequate fall to the drainage point — worth confirming during a site survey before delivery rather than after. The machine carries WRAS approval, which is relevant for sites subject to environmental health or council compliance requirements. The footprint is substantial, so confirming doorway clearance and available floor space in the pot wash area before ordering is a sensible step.

The UT132e is well suited to kitchens turning over significant covers daily where consistent pot wash throughput is a priority — contract catering operations, education and healthcare sites, hotel kitchens, and larger independent restaurants. Kitchens with a lower volume of oversized items may find a smaller utensil washer sufficient, while very high-output central production kitchens may benefit from considering a heavier-duty alternative.

If you would like to talk through whether this machine fits your kitchen layout, service volumes, or site installation conditions, our team is happy to help before you make a decision.

Frequently asked questions

Is the UT132e suitable for a kitchen turning over around 200 covers a day?

Yes, the UT132e is well suited to that service volume, particularly where the menu generates a consistent flow of large items such as gastronorm trays, stockpots, and baking sheets. The eleven selectable cycles give operators the control to run appropriate wash times rather than defaulting to the longest cycle for every load, which supports throughput across a full service.

What installation requirements should we confirm before ordering?

The machine requires a dedicated cold water supply, a waste connection with adequate fall for the gravity drain, and the appropriate electrical supply. Before delivery, it is worth carrying out a site survey to confirm the drainage gradient is achievable from your intended location, and to check that the machine can be brought into the pot wash area through existing doorways given its substantial footprint.

Can the UT132e handle the kind of soiling levels typical in a busy production kitchen?

The dual vertical wash pumps provide strong mechanical action across the rack, which reduces reliance on pre-soaking even for heavily soiled items. For very high-output central production kitchens processing significant volumes continuously throughout the day, it is worth discussing whether a heavier-duty model would be a better fit for your specific throughput requirements.
Maidaid UT132e 1320 x 700mm Rack Utensil Washer

£15,917.00(£19,100.40 inc VAT)

£15,917.00(£19,100.40 inc VAT)

The Maidaid UT132e is a rack-type utensil washer built specifically for the pot wash end of a commercial kitchen. Where standard pass-through or undercounter dishwashers fall short — deep stockpots, full-size gastronorm trays, baking sheets, roasting tins, and the oversized utensils that pile up during busy service — this machine is designed to cope. The generously sized wash chamber accommodates items that simply would not fit elsewhere.

Pot wash is one of the most consistent sources of service bottlenecks in high-volume kitchens. The UT132e uses dual vertically mounted wash pumps to deliver thorough mechanical action across the full rack, which reduces the need for extended soaking of heavily soiled items. Eleven selectable wash cycles give operators the flexibility to match cycle length to the level of soiling — useful for maintaining throughput at peak times without over-running chemicals and water during quieter periods.

In day-to-day operation, several design features make a practical difference:

  • Split door design makes loading and unloading straightforward, even with bulky items
  • Soft-touch electronic controls require minimal staff training to operate confidently
  • Onboard chemical dosing pumps are fitted as standard, removing the need for separate external dosing units
  • Gravity waste system reduces mechanical complexity and simplifies servicing
  • Double-wall stainless steel construction stands up to sustained heavy use

Installation requires a dedicated plumbing supply and waste connection. The gravity drain means the machine must be sited with an adequate fall to the drainage point — worth confirming during a site survey before delivery rather than after. The machine carries WRAS approval, which is relevant for sites subject to environmental health or council compliance requirements. The footprint is substantial, so confirming doorway clearance and available floor space in the pot wash area before ordering is a sensible step.

The UT132e is well suited to kitchens turning over significant covers daily where consistent pot wash throughput is a priority — contract catering operations, education and healthcare sites, hotel kitchens, and larger independent restaurants. Kitchens with a lower volume of oversized items may find a smaller utensil washer sufficient, while very high-output central production kitchens may benefit from considering a heavier-duty alternative.

If you would like to talk through whether this machine fits your kitchen layout, service volumes, or site installation conditions, our team is happy to help before you make a decision.