Maidaid C205WSHR 500mm Basket Pass Through product image

Maidaid

Maidaid C205WSHR Pass Through Dishwasher 500mm With Heat Recovery

SKU: C205WSHR

£5,982.00(£7,178.40 inc VAT)
Get a quote

Request a callback

Leave your details and we will call you back about Maidaid C205WSHR Pass Through Dishwasher 500mm With Heat Recovery.

Delivery Information

Price Match

  • In the event of equipment failure any parts needed will be provided 2
  • In the event of equipment failure an engineer will be sent for an onsite repair 2
  • Equipment can be connected to a single phase power supply – must be installed by a competent person
  • Equipment can be connected to a three phase power supply – must be installed by a competent person
  • Equipment that should be connected to a suitably rated outlet - must be installed by a competent person

The Maidaid C205WSHR is a 500mm basket pass-through dishwasher designed for continuous use in commercial catering environments. It accepts a standard 500mm rack and moves ware through in a single pass, making it a practical choice for kitchens that need a clear separation between dirty and clean sides without interrupting service flow.

In a busy kitchen, a pass-through machine earns its keep during peak periods. The C205WSHR is built for sustained throughput rather than occasional use — the wash and rinse system, combined with the heat recovery unit, allows the machine to maintain consistent results cycle after cycle without significant energy or water waste. The integrated drain pump removes the reliance on a gravity drain, giving more flexibility in positioning where fall to drain is limited or awkward.

The built-in water softener is a practical inclusion. Hard water causes limescale build-up on wash arms, tank elements, and rinse nozzles — all of which degrade wash quality over time and increase maintenance intervals. Having softening on board removes the need for a separate external unit and helps protect the machine in areas with hard or moderately hard water supply.

  • Heat recovery reduces energy consumption during extended service periods
  • Integrated water softener protects internal components in hard water areas
  • Drain pump allows flexible positioning without gravity drain dependency
  • Triple filtration system maintains wash quality and protects the pump
  • Single LED display with multiple cycle options suits varied ware types

Installation requires a connection to a mains water supply, a drain point, and an appropriate electrical supply — the specification of which should be confirmed before ordering. The heat recovery system requires adequate ventilation in the installation space; this is worth factoring into kitchen planning, particularly in enclosed wash-up areas. Weight and hood clearance should also be checked against your existing pass-through run or counter height.

The C205WSHR suits mid-sized operations — restaurants, hotel kitchens, workplace canteens, and similar — where a hood-type undercounter machine would struggle to keep pace but a full conveyor system would be disproportionate. If your covers are higher or your service is near-continuous across multiple sittings, a larger-capacity pass-through model may be worth considering. Equally, if your operation is smaller and a pass-through format is more than you need, a good-quality hood machine may be a more cost-effective fit.

If you're unsure whether the C205WSHR is correctly sized for your service volume or whether your installation space and services are compatible, our team is happy to talk it through with you before you commit.

Frequently asked questions

Is the C205WSHR suitable for a kitchen doing around 100 covers per service?

A 500mm pass-through at this output level is generally well suited to operations in the 80–150 covers range, depending on the mix of ware and how tightly service is concentrated. If your covers are spread across a long service window, throughput is less demanding than a busy two-hour sitting. It's worth talking through your actual service pattern rather than relying on covers alone as the deciding factor.

Do I still need an external water softener if the machine has one built in?

In most cases, no. The internal water softener is designed to treat the incoming supply before it reaches the wash system, which removes the usual requirement for a separate inline unit. That said, in areas with exceptionally hard water, it's worth confirming the softener capacity is adequate for your daily cycle volume — our team can advise based on your location and usage.

What should I check before installation?

You'll need a suitable mains water connection, a drain point the pump can discharge to, and the correct electrical supply — confirm the voltage and phase requirements against your existing services before ordering. The heat recovery system means the machine generates less ambient steam than a standard pass-through, but adequate ventilation in the wash-up area is still important. Hood clearance height and the physical footprint of your pass-through run should also be confirmed before delivery.
Maidaid C205WSHR Pass Through Dishwasher 500mm With Heat Recovery

£5,982.00(£7,178.40 inc VAT)

£5,982.00(£7,178.40 inc VAT)

The Maidaid C205WSHR is a 500mm basket pass-through dishwasher designed for continuous use in commercial catering environments. It accepts a standard 500mm rack and moves ware through in a single pass, making it a practical choice for kitchens that need a clear separation between dirty and clean sides without interrupting service flow.

In a busy kitchen, a pass-through machine earns its keep during peak periods. The C205WSHR is built for sustained throughput rather than occasional use — the wash and rinse system, combined with the heat recovery unit, allows the machine to maintain consistent results cycle after cycle without significant energy or water waste. The integrated drain pump removes the reliance on a gravity drain, giving more flexibility in positioning where fall to drain is limited or awkward.

The built-in water softener is a practical inclusion. Hard water causes limescale build-up on wash arms, tank elements, and rinse nozzles — all of which degrade wash quality over time and increase maintenance intervals. Having softening on board removes the need for a separate external unit and helps protect the machine in areas with hard or moderately hard water supply.

  • Heat recovery reduces energy consumption during extended service periods
  • Integrated water softener protects internal components in hard water areas
  • Drain pump allows flexible positioning without gravity drain dependency
  • Triple filtration system maintains wash quality and protects the pump
  • Single LED display with multiple cycle options suits varied ware types

Installation requires a connection to a mains water supply, a drain point, and an appropriate electrical supply — the specification of which should be confirmed before ordering. The heat recovery system requires adequate ventilation in the installation space; this is worth factoring into kitchen planning, particularly in enclosed wash-up areas. Weight and hood clearance should also be checked against your existing pass-through run or counter height.

The C205WSHR suits mid-sized operations — restaurants, hotel kitchens, workplace canteens, and similar — where a hood-type undercounter machine would struggle to keep pace but a full conveyor system would be disproportionate. If your covers are higher or your service is near-continuous across multiple sittings, a larger-capacity pass-through model may be worth considering. Equally, if your operation is smaller and a pass-through format is more than you need, a good-quality hood machine may be a more cost-effective fit.

If you're unsure whether the C205WSHR is correctly sized for your service volume or whether your installation space and services are compatible, our team is happy to talk it through with you before you commit.