Food Processor Slicing Discs

The Robot Coupe 27087 is a genuine 5mm slicing disc designed for use with a range of Robot Coupe bowl and continuous-feed processors, including the R101, R201, R211, R301, R401, R402, and CL40. It fits directly into the disc carrier on compatible machines and produces uniform 5mm slices from vegetables, fruits, and charcuterie with consistent results across a full batch.

In a working kitchen, slice thickness has a direct bearing on cooking times, portion yields, and how much remedial work ends up at the pass. A 5mm cut sits in a practical mid-range — substantial enough to hold its shape during roasting or gratin work, fine enough for composed salads and layered preparations. Robot Coupe discs are manufactured to close tolerances, which means cut quality holds throughout a full batch rather than drifting as the disc works through volume. That consistency matters most when prep is running at speed and quality control is harder to maintain by eye.

• Produces clean, uniform 5mm slices with minimal cell damage
• Reduces prep time significantly compared to hand-slicing at volume
• Consistent output supports portion control and predictable cooking results
• Fits and removes quickly during multi-task prep sessions
• Genuine Robot Coupe part maintains full compatibility and safety ratings

It is worth confirming your processor model before ordering. Disc carrier design can vary between generations of the same model, and a disc listed for a given range will not always fit every variant within it. If there is any uncertainty about compatibility with your machine, the team is happy to check before you place an order.

The Robot Coupe 27621 is a ripple cut slicing disc designed for use with compatible Robot Coupe bowl and continuous feed processors. Rather than producing a flat slice, it cuts with a wavy, ridged profile — a finish widely used on cucumbers, courgettes, carrots, beetroot and similar vegetables where presentation matters as much as preparation speed.

In a busy kitchen, ripple cut slices offer a small but practical advantage over flat cuts: the undulating surface holds dressings and marinades slightly better, and the visual variety adds interest to salads, garnishes, charcuterie boards and buffet displays without requiring any additional preparation steps. The disc slots directly into the existing processor workflow, so operators work the machine in exactly the same way — the only difference is the finished profile on the plate.

This disc is compatible with a range of Robot Coupe machines including the R101, R201, R211, R301, R401, R402 and CL40. Compatibility is model-specific within the Robot Coupe range, and bowl configuration can affect which discs fit correctly, so it is worth confirming your exact machine model before ordering. A quick check beforehand avoids an unnecessary return.

For kitchens looking to extend their cutting repertoire, Robot Coupe's disc system covers grating, julienne, dicing and a variety of slice thicknesses, so this disc tends to form part of a wider set rather than a standalone purchase.

If you would like to confirm compatibility with your current machine or talk through which combination of discs makes sense for your menu, the team is happy to help.

The Robot Coupe 27786 is a genuine 6mm slicing disc designed for use with a broad range of Robot Coupe bowl and continuous-feed food processors. Fitted in place of the standard cutting assembly, it produces uniform 6mm slices of vegetables, fruit, and similar ingredients at volume — a practical addition to any prep station where consistent slice thickness needs to be maintained across large quantities.

A 6mm cut sits in a useful middle range for commercial prep. It carries enough body for gratins, layered salads, and garnishes where the ingredient needs to hold its shape after cutting, while still being fine enough for dishes that benefit from thinner slices. Running product through a compatible Robot Coupe with this disc fitted is considerably faster than hand-slicing, and the output is markedly more consistent — which matters during busy prep shifts where portion control and presentation standards need to be maintained without slowing the team down.

• Produces uniform 6mm slices for consistent presentation and even cooking
• Significantly faster than hand-slicing across high-volume prep
• Compatible with Robot Coupe R101, R201, R211, R301, R401, R402, and CL40
• Straightforward to fit, remove, and clean between tasks
• Genuine Robot Coupe disc ensures correct fit and safe operation

Compatibility covers both smaller bowl processor models and the CL40 continuous-feed unit, making this disc practical across a range of kitchen sizes and prep volumes. That said, Robot Coupe produces several disc formats that are not interchangeable across all machines, so it is worth confirming your exact model before ordering. If you are working across multiple slice thicknesses or are unsure whether 6mm is the right cut for a particular application, we are happy to help you work through the options.

The Robot Coupe 27566 is a genuine 4mm slicing disc designed for use with a range of Robot Coupe bowl cutters and vegetable preparation machines, including the R101, R201, R211, R301, R401, R402, and CL40. It functions as either a direct replacement for a worn disc or as an additional cutting option where a kitchen requires more than one thickness in regular use.

A 4mm slice sits comfortably in the middle of the most commonly used thicknesses in professional prep — firm enough to hold structure through cooking or dressing, and thin enough to present neatly on the plate or across a buffet line. Cucumber, courgette, fennel, mushrooms, and most firm vegetables and fruits all pass through cleanly and consistently, which matters when you are working through a large prep batch and uniformity is expected across every portion.

Using a genuine part rather than a third-party disc is worth considering carefully. The disc seats correctly within the bowl assembly, and the blade geometry is engineered to match the drive speed of the machine. A poorly fitting or worn disc can compromise cut quality across a batch and, over time, place unnecessary load on the motor.

• Produces clean, consistent 4mm slices across a full prep batch
• Genuine fit ensures correct seating within the bowl assembly
• Suited to a wide range of firm vegetables and fruits
• Compatible across several Robot Coupe bowl cutter and processor models
• Reduces motor strain compared with worn or non-genuine alternatives

This disc is well suited to pub kitchens, hotel operations, contract catering sites, and busy independent restaurants running moderate to high daily vegetable prep volumes. If your operation spans a broader range of cut thicknesses, Robot Coupe produce a full disc range for these machines and we can help you build a practical set.

If you are unsure whether this disc is compatible with your specific machine variant, or you have recently taken on a Robot Coupe unit and want to confirm the right disc configuration, we are happy to check before anything is ordered.

The Robot Coupe 27555 is a genuine 2mm slicing disc designed to work with a specific range of Robot Coupe bowl cutters and vegetable preparation machines, including the R101, R201, R211, R301, R401, R402 and CL40. It is a replacement or additional disc for kitchens already running compatible equipment, not a standalone product.

A 2mm cut sits at the finer end of the slicing range. It is well suited to tasks where thinness and uniformity matter — cucumber and courgette garnishes, potato gratin, dressed salads, and any presentation work where a thicker slice would look out of place. At this thickness, cut quality is noticeably affected by disc condition, which is one reason to stay with a genuine manufacturer part rather than a generic alternative.

In day-to-day prep, having the right disc to hand keeps the workflow moving. The practical advantages include:

• Fine, consistent 2mm slices across a broad range of vegetables
• Direct fit with compatible Robot Coupe machines — no adaptation needed
• Genuine construction maintains cut quality and supports hygiene standards
• Quick to swap between disc types during multi-task prep sessions
• Reduces hand-knife time on high-volume fine-slicing tasks

There are no installation requirements beyond confirming your machine is one of the listed compatible models. Disc compatibility is not universal across the Robot Coupe range, so if you are running a model not listed above, it is worth checking before you order.

If you are unsure whether the 27555 fits your machine, or whether a different cut thickness would better serve your prep workflow, we are happy to work through that with you.

The Robot Coupe 27086 is a 3mm slicing disc designed as a genuine manufacturer accessory for several models across the Robot Coupe food processor and combination cutter range, including the R101, R201, R211, R301, R401, R402, and CL40. It fits directly into the machine bowl in place of other disc attachments and produces consistent 3mm slices from vegetables, fruits, and similar produce throughout a prep service.

A 3mm cut occupies a practical position in the prep range — fine enough for gratins, layered salads, and garnishes, while retaining enough structure to hold shape during cooking or plating. In a busy prep kitchen, that uniformity matters. Extended manual knife work rarely delivers the consistency a disc attachment provides, and uneven thickness affects cook times, portion appearance, and plate presentation. Paired with a well-maintained machine, this disc handles repetitive volume prep reliably batch after batch.

Because this is a genuine Robot Coupe part, it is manufactured to the original equipment tolerances. Aftermarket or incorrectly matched discs can introduce fit issues that cause uneven output, additional vibration, and accelerated wear on the machine over time. Using the correct manufacturer accessory removes that risk.

This disc is well suited to kitchens already running a compatible Robot Coupe model that need to extend prep capability, equip a second workstation with a dedicated disc, or replace one that has worn with regular use. It is worth noting that if prep volumes have grown significantly since the original machine was purchased, it may be sensible to review whether the machine itself remains appropriately sized before adding further accessories.

If you are unsure whether this disc is the right match for your machine or your current prep requirements, the team is happy to help you confirm before you order.

The Robot Coupe 27051 is a 1mm slicing disc designed for use with a range of Robot Coupe bowl and continuous-feed processors, including the R101, R201, R211, R301, R401, R402 and CL40. It is a commonly specified replacement or supplementary disc for kitchens that already run Robot Coupe equipment as part of their daily prep routine.

A 1mm cut is among the finest settings available from this type of disc. In practical terms, that means consistently thin, uniform slices of vegetables, fennel, cucumber, courgette, charcuterie and similar produce — the kind of result that matters when presentation standards are high or when a recipe demands precision that hand slicing under pressure simply cannot reliably deliver. Across a full batch, the disc produces even, repeatable results where knife work would introduce increasing inconsistency as fatigue sets in during a long prep session.

For a working prep kitchen, having the right disc immediately to hand keeps the prep flow moving. It fits and removes cleanly, which matters when the processor needs to be adapted quickly between tasks during a busy turnaround.

• Consistent 1mm slices across a full batch, reducing waste from uneven cuts
• Straightforward to fit and swap, supporting faster transitions between prep tasks
• Suited to high-presentation dishes where slice uniformity is critical
• Reduces reliance on knife work for fine slicing during peak prep periods
• Genuine Robot Coupe accessory, engineered to the tolerances of the processor range

It is worth confirming your processor model before ordering. While this disc covers a broad range of Robot Coupe units, not all models share the same disc fixing system, and fitting an incompatible disc can affect both cut quality and safe operation.

If you are building out a full disc set for your processor or want guidance on which cutting profiles best suit your menu, the team is happy to help you work through the options.