Gamko Bottle Cooler - Double Sliding Door 275 product image

Gamko

Gamko Bottle Cooler Double Sliding Door 275Ltr MG2/275SD

SKU: CE555

£2,213.00(£2,655.60 inc VAT)
Get a quote

Request a callback

Leave your details and we will call you back about Gamko Bottle Cooler Double Sliding Door 275Ltr MG2/275SD.

Delivery Information

Price Match

  • In the event of equipment failure any parts needed will be provided 2
  • In the event of equipment failure an engineer will be sent for an onsite repair 2

The Gamko MG2/275SD is a double sliding door bottle cooler with a 275-litre capacity, finished in anthracite. It is designed for back-bar and front-of-house use in licensed premises, restaurants, and event venues where reliable, accessible chilled storage is needed throughout service. The sliding door configuration is a deliberate practical choice rather than a cosmetic one — it allows staff to access bottles quickly without needing clearance space in front of the unit, which matters in tight bar layouts.

Gamko units of this type are well established in busy licensed environments. The finned evaporator aids pull-down speed when the cabinet has been loaded with ambient-temperature stock, helping operators get newly stocked bottles to serving temperature within a reasonable timeframe before or during service. The electronic thermostat allows accurate temperature setting across a broad range, and the auto-defrost function reduces maintenance intervention during operation. At 48dB the unit runs quietly enough to suit customer-facing locations without becoming intrusive.

From an operational standpoint, the practical advantages are straightforward:

  • Sliding doors eliminate swing clearance requirements, keeping bar aisles clear
  • Lockable doors add a basic level of stock security during quieter periods
  • Adjustable feet allow level installation on the uneven flooring common in older licensed premises
  • Auto-defrost reduces the need for manual defrost cycles during the working week
  • Anthracite finish suits most back-bar and front-of-house aesthetics without requiring additional cladding

Installation is straightforward for a unit of this type. It operates on a standard single-phase supply and uses R600a refrigerant. At 135kg the unit is substantial, so access routes and flooring load capacity are worth checking before delivery. Allow adequate clearance at the rear and sides for ventilation — insufficient airflow around the cabinet will affect performance and long-term reliability. The 1200mm width fits most standard back-bar runs, but confirm your available space against the full footprint before ordering.

This model is well suited to medium-volume bars, hotel bars, restaurant front-of-house areas, and event venues with moderate throughput. For higher-volume sites requiring greater storage capacity or more intensive cycling, a larger or more heavy-duty model may be more appropriate. Equally, for very compact bar installations, a single-door or smaller-capacity unit may be a better fit.

If you are unsure whether this model matches your layout or service volume, our team are happy to talk it through before you commit to anything.

Frequently asked questions

Is this bottle cooler suitable for a busy pub or high-volume bar?

The MG2/275SD handles steady back-bar demand well in moderate-volume licensed premises. In very high-volume venues where doors are opened frequently throughout a long service, the thermal load increases and a higher-capacity or more heavy-duty unit may maintain temperatures more consistently — it is worth discussing your expected throughput with us before deciding.

What are the key installation requirements for this unit?

The cooler requires a standard single-phase electrical connection and adequate ventilation clearance around the cabinet — restricted airflow is one of the more common causes of reduced performance and premature wear on refrigeration units of this type. At 135kg it is a heavy piece of kit, so confirm your access route and floor load capacity ahead of delivery.

Why choose sliding doors over a hinged-door bottle cooler?

Sliding doors are the practical choice where back-bar or aisle space is limited, as they require no swing clearance in front of the cabinet. In open bar layouts with more room, hinged doors can offer slightly wider access to the full cabinet interior, so the right choice depends on your specific layout.
Gamko Bottle Cooler Double Sliding Door 275Ltr MG2/275SD

£2,213.00(£2,655.60 inc VAT)

£2,213.00(£2,655.60 inc VAT)

The Gamko MG2/275SD is a double sliding door bottle cooler with a 275-litre capacity, finished in anthracite. It is designed for back-bar and front-of-house use in licensed premises, restaurants, and event venues where reliable, accessible chilled storage is needed throughout service. The sliding door configuration is a deliberate practical choice rather than a cosmetic one — it allows staff to access bottles quickly without needing clearance space in front of the unit, which matters in tight bar layouts.

Gamko units of this type are well established in busy licensed environments. The finned evaporator aids pull-down speed when the cabinet has been loaded with ambient-temperature stock, helping operators get newly stocked bottles to serving temperature within a reasonable timeframe before or during service. The electronic thermostat allows accurate temperature setting across a broad range, and the auto-defrost function reduces maintenance intervention during operation. At 48dB the unit runs quietly enough to suit customer-facing locations without becoming intrusive.

From an operational standpoint, the practical advantages are straightforward:

  • Sliding doors eliminate swing clearance requirements, keeping bar aisles clear
  • Lockable doors add a basic level of stock security during quieter periods
  • Adjustable feet allow level installation on the uneven flooring common in older licensed premises
  • Auto-defrost reduces the need for manual defrost cycles during the working week
  • Anthracite finish suits most back-bar and front-of-house aesthetics without requiring additional cladding

Installation is straightforward for a unit of this type. It operates on a standard single-phase supply and uses R600a refrigerant. At 135kg the unit is substantial, so access routes and flooring load capacity are worth checking before delivery. Allow adequate clearance at the rear and sides for ventilation — insufficient airflow around the cabinet will affect performance and long-term reliability. The 1200mm width fits most standard back-bar runs, but confirm your available space against the full footprint before ordering.

This model is well suited to medium-volume bars, hotel bars, restaurant front-of-house areas, and event venues with moderate throughput. For higher-volume sites requiring greater storage capacity or more intensive cycling, a larger or more heavy-duty model may be more appropriate. Equally, for very compact bar installations, a single-door or smaller-capacity unit may be a better fit.

If you are unsure whether this model matches your layout or service volume, our team are happy to talk it through before you commit to anything.