Hoshizaki Ice Machines and Ice Cream Machines

The Hoshizaki DIM-40DE-HC is a self-contained cube ice dispenser that combines ice production, storage, and dispensing within a single upright unit. There is no separate ice machine, no exposed storage bin, and no requirement for staff to handle ice manually — the unit produces ice continuously, holds it internally, and releases it only at the point of dispensing.

In continuous-service environments, the unit handles steady demand reliably across long operating periods. Because users interact only with the dispense mechanism and never with stored ice, it is particularly well suited to settings where members of the public, patients, or guests may be serving themselves unsupervised throughout the day. Hoshizaki's cube ice format is well regarded in the trade for being slow-melting and consistent in size, which helps maintain drink quality and reduces dilution at the point of service.

From a day-to-day operational standpoint, the unit offers several practical advantages:

• Fully enclosed ice path eliminates air and light exposure, reducing contamination risk during storage
• Touch-free or lever-operated dispensing removes staff from the ice-handling process entirely
• Portion control settings allow consistent serving sizes, helping to reduce waste over high-traffic periods
• Compact upright footprint suits serveries, corridor drink stations, ward beverage points, and canteen lines
• Slow-melting cube format helps maintain drink quality and reduces over-pouring to compensate for melt

Installation requires a mains cold water feed, a suitable drain connection, and an appropriate electrical supply. The unit generates heat during the refrigeration cycle, so adequate ventilation clearance around the casing is important — anyone planning to fit this into a furniture run or enclosed alcove should confirm clearance requirements before committing to a layout. Access for routine servicing and filter changes should be factored into the installation design from the outset.

At 43kg per 24 hours, this model is a practical match for hotels, care homes, hospital wards, staff canteens, and similar settings where moderate, steady ice demand continues throughout the day. It is not designed for high-volume bar service or multi-station setups drawing heavily during short service windows — for those environments, a higher-output model would be a better fit. For very low-demand locations, a smaller unit may offer better running economy.

If you would like to talk through whether this output level suits your site, or have questions about installation requirements, our team is happy to work through it with you before you commit to an order.

The Hoshizaki Wessamat C-105 is a countertop ice crusher designed to process whole ice cubes into crushed ice at a single service point. It is not an ice maker — it sits alongside an existing ice machine and converts that supply into the format needed for cocktails, long drinks, chilled food displays, and similar applications. Compact enough for a bar top or buffet counter, it is built for regular, steady use rather than high-volume continuous crushing across multiple outlets.

In a working bar environment, the C-105 handles the kind of moderate, consistent demand that comes with cocktail service or a buffet station without becoming a bottleneck during a shift. It keeps pace with regular drink orders and processes ice quickly enough that service rarely has to wait. It is not intended for operations requiring large-scale continuous output from several service points simultaneously — for that level of demand, a heavier-duty machine would be a more appropriate fit.

• Processes standard ice cubes quickly to keep pace with drink service
• Compact footprint suits bar tops, buffet counters, and event stations
• Straightforward to operate with minimal training required
• Easy to clean between service periods, supporting good hygiene routines
• Works alongside an existing ice machine — no separate water line needed

Installation is simple. The unit needs a standard mains supply and a stable, level surface with drainage nearby for meltwater. There are no water line connections required for the crusher itself. Ensuring adequate airflow around the unit and that the counter can support its working weight will help maintain reliable performance over time.

The C-105 is well suited to smaller bars, hotel buffet counters, café settings, and event catering operations where crushed ice is needed regularly but not in volumes that would justify a larger dedicated machine. If your operation runs a busy multi-station bar or demands continuous high-volume output, it is worth discussing whether a higher-capacity alternative would better match your throughput.

If you would like to talk through whether the C-105 is the right fit for your setup, our team is happy to have that conversation before you place an order.

The Hoshizaki DCM-60KE-HC is a self-contained unit that produces cubelet ice, stores it in an internal 1.9kg bin, and dispenses it — alone or combined with chilled water — at the touch of a button. The entire process happens within a single compact footprint: production, storage, and hygienic delivery without any staff handling or scooping. It runs on R290, a natural refrigerant with a low global warming potential, which has become increasingly standard across commercial refrigeration applications.

In practice, this type of dispenser is most commonly found at healthcare catering points, hotel beverage stations, staff canteens, and front-of-house self-service counters where consistent, unattended access to ice and chilled water is needed throughout the day. Because stored ice is never exposed to open-air scooping or manual contact, it is well suited to environments where hygiene standards are closely managed or subject to external audit.

The practical advantages this design offers operators include:

• Touch-button dispensing eliminates scooping, reducing contamination risk and freeing staff time
• Portion control keeps ice consumption predictable and waste low across a service period
• All-in-one construction means a single set of water, drainage, and electrical connections to manage
• Compact counter footprint makes it practical for beverage stations where space is limited
• R290 refrigerant supports consistent production without reliance on high-GWP synthetic gases

Installation requires a mains cold water supply, a drainage point, and a standard electrical connection. Adequate clearance around the unit is needed for ventilation and routine cleaning access. At 60kg per 24 hours, this model is well matched to low-to-medium demand settings. Sites with higher sustained throughput — such as large hotel bars, busy restaurant service counters, or high-footfall healthcare facilities — should consider a larger-capacity unit or a modular production system.

This dispenser suits operators who need reliable, hygienic ice and water access in a self-service setting without the complexity of a larger production setup. If you would like to talk through whether the output capacity fits your expected demand before ordering, the team is happy to help.

The Hoshizaki DCM-120KE-HC is a self-contained ice and water dispenser that produces and dispenses cubelet ice, chilled water, or a combination of both from a single unit. With a 24-hour output of up to 125kg, it integrates ice-making, storage, and dispensing into one compact machine, removing the need for separate ice bins or manual scooping. The unit uses R290 refrigerant and holds up to 4kg of ice in reserve, ready for immediate service.

In practice, this type of dispenser is well suited to high-footfall environments where ice and water need to be available quickly and consistently throughout the day. Cubelet ice — sometimes called nugget or chewable ice — is softer than standard cube ice and well regarded in beverage service, healthcare catering, and self-service drink stations. The dispensing mechanism keeps ice contained and untouched by hand, which supports food hygiene requirements and reduces cross-contamination risk compared with open ice bins and scoops.

From an operational standpoint, the key advantages of this unit are:

• Hands-free, hygienic ice and water dispensing at the touch of a button
• Combined production, storage, and service in a single footprint
• Consistent cubelet ice output suited to soft drinks, healthcare, and hospitality use
• R290 refrigerant, which carries a lower global warming potential than older refrigerants
• Reduced staff handling time compared to traditional ice bin and scoop setups

Installation requires a cold water supply connection and appropriate drainage, along with a suitable electrical supply. The unit is designed for countertop or built-in placement, and access to the rear or sides for ventilation and servicing should be factored into positioning. As with all ice machines, water quality affects both ice quality and long-term reliability — sites with hard water should consider in-line filtration. Regular cleaning and descaling schedules are important to maintain output and hygiene standards.

This dispenser is a practical choice for hotel beverage stations, staff restaurants, healthcare environments, and catering operations where self-service ice and water is required continuously through a service period. For very high-volume sites or operations requiring significantly greater ice storage capacity, a larger-capacity unit may be worth considering. Equally, smaller operations with modest demand may find a lower-output machine more appropriate to their throughput.

If you would like to talk through whether this unit fits your setup, the team is happy to help you assess your requirements before you commit.

The Hoshizaki DSM-13DE is a self-contained countertop unit that produces, stores and dispenses shuttle ice within a single enclosed cabinet. Shuttle ice — Hoshizaki's distinctive cylindrical cube format — is generated internally and delivered at the press of a button, with no manual handling required between production and service point. That closed-loop design is the defining characteristic of this model and the primary reason it finds favour in environments where hygiene control is a priority.

In day-to-day service, the unit handles steady, light-to-moderate demand across a typical operational period without any staff involvement at the point of dispensing. Because ice moves directly from production into a sealed storage section and out through the dispense mechanism, there is no open transfer stage where contamination could be introduced. This makes it a practical and reliable choice in healthcare wards, care homes, hotel beverage stations and staff refreshment areas — settings where consistent, hands-free ice service matters as much as output volume.

From an operational standpoint, the integrated design offers several clear day-to-day advantages:

• Fully enclosed production and storage reduces contamination risk throughout the process
• Single-button dispensing supports consistent, hands-free self-service
• Compact countertop footprint suits installations where space is limited
• Shuttle ice melts slowly, keeping drinks cold without rapid dilution
• All-in-one design removes the need for a separate storage bin or transfer step

Installation requires a mains cold water connection and a suitable drainage arrangement. The unit should be positioned with adequate ambient ventilation and kept away from direct heat sources such as ovens or direct sunlight, both of which reduce production efficiency. At 13kg daily output, the DSM-13DE is well suited to a single beverage station or a small ward setting. It is not intended for high-volume bar or busy restaurant service where ice demand across a full shift would exceed its capacity — operators anticipating heavier throughput should consider a higher-capacity model within the range.

This dispenser is best suited to healthcare and care environments, hotel beverage points, office and staff dining facilities, and smaller hospitality operations where hygienic, low-intervention ice service takes priority over high output volume. It is less appropriate where sustained large-volume demand is expected throughout a busy service period.

If you are weighing up whether the DSM-13DE is the right fit for your site — or whether a different capacity would serve your operation better — our team is glad to talk it through with you.