Maidaid

Maidaid D502 500mm Undercounter Glasswasher with Drain Pump

SKU: D502/13amp

£2,724.00(£3,268.80 inc VAT)

Power: 13 Amps
Get a quote

Request a callback

Leave your details and we will call you back about Maidaid D502 500mm Undercounter Glasswasher with Drain Pump.

Delivery Information

Price Match

  • In the event of equipment failure any parts needed will be provided 2
  • In the event of equipment failure an engineer will be sent for an onsite repair 2
  • Equipment may be supplied with a moulded plug but may be more suitably connected to a fused spur
  • Equipment can be connected to a single phase power supply – must be installed by a competent person
  • Equipment can be connected to a three phase power supply – must be installed by a competent person
  • Equipment that should be connected to a suitably rated outlet - must be installed by a competent person

The Maidaid D502 is a 500mm undercounter glasswasher built for commercial bar and hospitality environments where consistent glass hygiene and reliable throughput are needed throughout service. It fits beneath a standard bar counter, connects to a mains water supply, and uses an onboard drain pump to handle waste removal — removing the dependency on a conveniently positioned floor-level drain point, which is often a practical constraint in bar installations.

In service, the D502 performs reliably across small to medium-volume operations. Three selectable wash programmes, including a dedicated renovation cycle for dulled or cloudy glassware, allow operators to match the programme to the load rather than defaulting to maximum resource on every cycle. A thermo-stop system holds the wash at the correct hygiene temperature before releasing, supporting repeatable results across busy service periods. An automatic self-clean function helps maintain the machine between shifts without requiring manual intervention each time.

A few operational features are worth noting:

  • Onboard drain pump widens installation options by removing the need for gravity drainage
  • Traffic light LED display gives clear cycle progress at a glance without reading a screen
  • Energy saving mode reduces consumption during quieter periods between service
  • Chemical dosing fitted as standard — no separate installation or additional equipment needed
  • Double-skinned construction helps retain heat and keeps the external surface cooler to the touch

Installation requires a mains water connection, a suitable electrical supply, and a waste outlet. The unit carries WRAS approval, which matters on sites where water fittings compliance is a requirement. As with any undercounter glasswasher, ventilation around the unit is worth planning carefully, and the positioning beneath the counter should allow reasonable access for routine cleaning and periodic descaling.

The D502 is well suited to pubs, bars, small hotels, and event venues running moderate glass volumes through a single service point. It is not intended for high-volume operations processing several hundred covers per session — those environments would be better served by a higher-capacity machine with a faster cycle time or larger basket footprint. At the other end, very low-volume sites where a drain pump adds unnecessary cost may find a simpler model the more practical choice.

If you are unsure whether the D502 matches your service volume or fits your installation layout, the team is happy to talk it through with you before you commit.

Frequently asked questions

Is the D502 suitable for a busy pub or bar running continuous service?

The D502 is well suited to small to medium-volume bar operations where glass demand is steady but not extreme. It handles the throughput typical of a pub or hotel bar comfortably, but if your operation regularly processes high volumes across multiple service periods, a higher-capacity machine with a shorter cycle time may serve you better. It is worth discussing your peak cover numbers with us before deciding.

What does the drain pump actually mean for installation?

A drain pump allows the machine to expel waste water upward or across a longer horizontal run, rather than relying on a drain point directly below or immediately adjacent to the unit. This makes it considerably easier to position the machine where it is most useful behind the bar, rather than where the plumbing happens to be. You will still need a mains water supply and a waste outlet within reach, but the pump gives you meaningfully more flexibility.

How much maintenance does the D502 require day to day?

The built-in automatic self-clean cycle handles routine internal maintenance without manual input, which reduces the burden on bar staff at the end of service. Operators should still carry out regular descaling — the frequency depending on local water hardness — and check that the chemical dosing levels are maintained. Positioning the machine with clear access to the interior makes these tasks straightforward and helps extend the working life of the unit.

Maidaid D502 500mm Undercounter Glasswasher with Drain Pump

£2,724.00(£3,268.80 inc VAT)

£2,724.00(£3,268.80 inc VAT)

Options
Power: 13 Amps
  • 13 Amps
  • 20 Amps
  • 30 Amps

The Maidaid D502 is a 500mm undercounter glasswasher built for commercial bar and hospitality environments where consistent glass hygiene and reliable throughput are needed throughout service. It fits beneath a standard bar counter, connects to a mains water supply, and uses an onboard drain pump to handle waste removal — removing the dependency on a conveniently positioned floor-level drain point, which is often a practical constraint in bar installations.

In service, the D502 performs reliably across small to medium-volume operations. Three selectable wash programmes, including a dedicated renovation cycle for dulled or cloudy glassware, allow operators to match the programme to the load rather than defaulting to maximum resource on every cycle. A thermo-stop system holds the wash at the correct hygiene temperature before releasing, supporting repeatable results across busy service periods. An automatic self-clean function helps maintain the machine between shifts without requiring manual intervention each time.

A few operational features are worth noting:

  • Onboard drain pump widens installation options by removing the need for gravity drainage
  • Traffic light LED display gives clear cycle progress at a glance without reading a screen
  • Energy saving mode reduces consumption during quieter periods between service
  • Chemical dosing fitted as standard — no separate installation or additional equipment needed
  • Double-skinned construction helps retain heat and keeps the external surface cooler to the touch

Installation requires a mains water connection, a suitable electrical supply, and a waste outlet. The unit carries WRAS approval, which matters on sites where water fittings compliance is a requirement. As with any undercounter glasswasher, ventilation around the unit is worth planning carefully, and the positioning beneath the counter should allow reasonable access for routine cleaning and periodic descaling.

The D502 is well suited to pubs, bars, small hotels, and event venues running moderate glass volumes through a single service point. It is not intended for high-volume operations processing several hundred covers per session — those environments would be better served by a higher-capacity machine with a faster cycle time or larger basket footprint. At the other end, very low-volume sites where a drain pump adds unnecessary cost may find a simpler model the more practical choice.

If you are unsure whether the D502 matches your service volume or fits your installation layout, the team is happy to talk it through with you before you commit.