Attachments and Wind Guards

The Crown Verity WG48 is a purpose-built wind guard designed specifically for use with the Crown Verity MCB48 mobile barbecue. It attaches directly to the unit and forms a barrier around the cooking area to reduce the effect of crosswind on grill performance.

Outdoor cooking environments are particularly susceptible to wind interference. Even a moderate breeze can cause noticeable temperature fluctuations across the grill surface, leading to uneven cooking results, extended cook times, and increased fuel consumption. For operators running event catering, hospitality venues, outdoor festivals, or sports facility service, this kind of inconsistency during a busy service period is a practical problem. Fitting the WG48 helps create a more stable cooking environment and keeps grill performance predictable when conditions are less than ideal.

The key consideration here is compatibility. The WG48 is designed exclusively for the MCB48 model and is not a universal fit across the Crown Verity range. If you are running a different Crown Verity barbecue unit, it is worth confirming compatibility before ordering rather than assuming it will suit your setup.

For operators who regularly cook outdoors in exposed locations, or who have previously experienced inconsistent results in windier conditions, this is a straightforward addition that addresses a genuine service problem without any significant installation requirement.

If you have questions about whether this accessory suits your current setup or outdoor cooking operation, the team is happy to talk it through with you.

The Crown Verity WG36 is a purpose-built wind guard designed to fit directly onto the MCB36 and MCB72 barbecue units. Its function is straightforward: to act as a physical barrier against wind interference, helping the grill maintain a more consistent cooking temperature across the full grilling surface during outdoor service.

Wind is one of the more disruptive variables in outdoor catering. Even a moderate crosswind can create significant heat variation across a grill — leading to uneven cook results, extended cook times, and higher gas consumption as the burners work harder to compensate. For operations using the MCB36 or MCB72 regularly in open or semi-exposed conditions, fitting the correct wind guard is a practical step rather than an optional extra.

The operational benefits are straightforward:

• More consistent heat distribution across the grilling surface
• Reduced gas waste caused by wind-induced heat loss
• More predictable cook times during busy outdoor service periods
• Better operator control in exposed or variable-weather environments

This accessory is well suited to operators running outdoor catering events, terrace service, or barbecue stations in exposed yard or garden settings where the MCB36 or MCB72 is in regular use. It is a model-specific fitment — the WG36 is designed for the MCB36 and MCB72 only and should not be assumed to fit other Crown Verity units.

If you are working out the right configuration for your outdoor barbecue setup, we are happy to talk through the options with you.

The Crown Verity WG30 is a purpose-made wind guard designed to fit the MCB30 and MCB60 series of Crown Verity gas barbecues. Its function is straightforward: to reduce heat loss caused by wind interference when cooking in exposed outdoor environments.

Outdoor catering and barbecue service present a consistent practical challenge — even moderate wind can disrupt heat distribution across the grill surface, leading to uneven cooking temperatures and extended cook times. A wind guard addresses this directly by shielding the cooking area from cross-draughts, helping the unit maintain a more stable and consistent heat. For operators running busy outdoor service periods, this translates to more predictable cooking performance and less time compensating for temperature variation.

• Reduces heat loss during outdoor service in exposed or coastal locations
• Helps maintain more consistent grill surface temperature
• Supports more reliable cook times during peak service
• Purpose-fit design for MCB30 and MCB60 — no adaptation required
• Straightforward to fit without specialist tools or installation

It is worth confirming compatibility before ordering. This guard is designed specifically for the MCB30 and MCB60 models and is not a universal fit across the Crown Verity range. If you are operating a different Crown Verity unit, it is worth checking which wind guard, if any, is specified for your model before purchasing.

This accessory is well suited to operators running outdoor catering, event catering, pub gardens, or festival and market trade where the barbecue is regularly used in open or semi-exposed settings. For indoor or well-sheltered outdoor use, a wind guard is unlikely to offer meaningful benefit.

If you are unsure whether this is the right accessory for your setup, the team is happy to talk it through with you before you order.

The Crown Verity RT72 is a purpose-built rotisserie attachment designed exclusively for use with the Crown Verity MCB72 barbecue. It converts the MCB72 into a rotisserie cooking unit capable of handling whole birds, large joints, and other substantial cuts that benefit from slow, even rotation over radiant heat. It is not a universal fitment and will not suit other BBQ models.

In a commercial outdoor cooking context — hotel terraces, event catering rigs, pub garden stations — rotisserie cooking offers a practical advantage during extended service periods. Continuous rotation promotes even cooking and natural self-basting, which reduces the need for constant staff attention and helps maintain consistency across multiple birds or joints running simultaneously. The attachment is supplied with two sets of five-inch forks, allowing more than one item to be secured on the spit at once, which helps operators manage throughput during busier services.

Practical points worth considering before purchasing:

• Designed exclusively for the MCB72 — not compatible with other Crown Verity models
• Supplied with two sets of five-inch forks for securing multiple items on the spit
• Adds rotisserie capability to an existing MCB72 without requiring a separate dedicated unit
• Well suited to outdoor events, seasonal menus, and live-cook theatre presentations

This attachment is best suited to operators who already own or are purchasing the MCB72 and want to extend its cooking range without investing in additional standalone equipment. It suits caterers running outdoor events or fixed outdoor kitchen stations where rotisserie presentation adds visible value. For sites requiring a high-throughput, dedicated rotisserie solution running independently, a standalone unit would be a more appropriate consideration.

If you're building out an outdoor cooking setup around the MCB72 and want to make sure the full configuration is right for your operation, feel free to give the team a call.

The Crown Verity RT60 is a rotisserie attachment designed exclusively for use with the Crown Verity MCB60 barbecue. It fits directly to the MCB60 and adds a rotating spit function, allowing operators to cook whole birds, joints, or other suitable product over the existing burners without needing a separate piece of equipment.

In a commercial outdoor catering context, rotisserie cooking is well regarded for delivering consistent, even results with relatively low active involvement during service. Once product is loaded and the spit is turning, the cook is free to manage other tasks — a practical advantage during busy periods when the team is stretched across multiple stations. For operators already running an MCB60, the RT60 is a straightforward way to extend that unit's output without adding complexity or a second piece of kit to manage.

Practical advantages for catering teams include:

• Adds rotisserie capability to an existing MCB60 without additional equipment
• Suitable for batch cooking whole birds or joints during service
• Supplied with two sets of forks to accommodate different product configurations
• Keeps the cooking footprint consolidated to a single unit

It's worth being clear that the RT60 is compatible only with the MCB60 — it will not fit other Crown Verity models or third-party barbecues. Operators should confirm they are running an MCB60 before ordering. The attachment is intended for outdoor commercial use in line with the MCB60's own operating requirements.

The RT60 is well suited to outdoor hospitality venues, event caterers, and mobile catering operations that are already using the MCB60 and want to add rotisserie output to their service offer. For operations with significantly higher throughput demands, it may be worth exploring whether a dedicated rotisserie unit would be more appropriate.

If you'd like to talk through whether the RT60 fits how you're running your MCB60, the team is happy to help you think it through before you order.

The Crown Verity RT48 is a rotisserie attachment designed exclusively for use with the Crown Verity MCB48 barbecue. It fits directly to the MCB48 and enables spit-roasting over live heat, adding a second cooking method to a unit that operators may already be running for standard grilling.

In outdoor catering and event hospitality settings, rotisserie cooking is a reliable way to handle whole birds and large joints at volume. The continuous rotation produces an even, self-basting effect that tends to give more consistent results across larger cuts than static grilling alone — particularly useful during long service periods where the grill is working hard and consistency matters. It is a practical extension of the MCB48's capability rather than a replacement for it, and the attachment can be fitted or removed as the menu demands.

From an operational standpoint, the main practical points to be aware of are:

• Designed exclusively for the MCB48 — compatibility is unit-specific, not universal
• Suited to whole birds, large joints, and similar proteins requiring slow, even cooking
• Supplied with 5-inch forks as standard
• Straightforward to fit and remove without specialist tools
• Extends the cooking repertoire without adding a separate piece of equipment

This attachment is best suited to outdoor event caterers, mobile hospitality operators, and venue teams already running the MCB48 who want to offer spit-roasted items alongside their standard barbecue menu. Before ordering, it is worth confirming you have the correct MCB48 model, as rotisserie compatibility is not interchangeable across different units in the Crown Verity range.

If you would like to talk through how the RT48 works alongside the MCB48 in a specific event or service context, the team is happy to help you work out whether it is the right addition to your setup.

The Crown Verity RT36 is a rotisserie attachment designed to work directly with Crown Verity's MCB36 and MCB72 barbecue units. Rather than requiring a separate piece of equipment, it converts either of those barbecues into a spit-roasting setup, broadening the cooking capabilities available from a unit you may already own. It is supplied with a set of five-inch forks, so it is ready to use once fitted.

In outdoor catering and event environments, rotisserie cooking suits situations where consistent, hands-off heat is more practical than constant grill management. Whole chickens, joints, and larger cuts rotate over indirect heat, which frees staff to focus on other aspects of service. For operators working at volume — outdoor hospitality, event catering, marquee dining — that reduction in grill attention during a busy period has a real operational value.

• Fits the MCB36 and MCB72 directly, without modification to the barbecue
• Suited to whole birds, joints, and larger rotisserie-appropriate cuts
• Reduces hands-on monitoring needed during a busy service run
• Keeps outdoor cooking consolidated to a single unit
• Supplied with forks included, ready to use from fitting

As this is a dedicated accessory, compatibility is limited to the MCB36 and MCB72. Operators running any other Crown Verity model, or a barbecue from a different manufacturer, should confirm compatibility before ordering. The barbecue should be on a stable, level surface during use given the rotation and load involved — worth checking before each event rather than assuming the ground conditions are consistent.

This attachment is well suited to catering businesses, event operators, and hospitality venues that already run a compatible Crown Verity barbecue and want to extend what it can do. If you are unsure whether your current setup is compatible, or you are weighing up which Crown Verity barbecue to pair it with, feel free to give the team a call before you order.

The Crown Verity RT30 is a rotisserie attachment designed specifically for the MCB30 and MCB60 barbecue units within the Crown Verity range. It fits directly onto compatible units without modification or fabrication, converting an existing grill into a rotisserie cooking station and broadening the menu options available from a single piece of equipment.

Rotisserie cooking is well suited to volume service — whole birds, rolled joints, and large cuts cook consistently with minimal manual intervention, which matters during sustained outdoor service periods where staff attention is spread across multiple stations. The RT30 is relevant wherever operators need reliable, repeatable results on larger protein loads without running a separate dedicated unit.

From a practical standpoint, the key advantages for outdoor catering operations are straightforward:

• Fits directly to MCB30 and MCB60 units — no tools or fabrication required
• Suitable for whole birds and large joints in continuous service
• Supplied with forks to secure product securely during rotation
• Extends an existing barbecue's capability without additional equipment footprint
• Compact accessory format — easy to transport alongside the main unit

It is worth being clear about compatibility: the RT30 is designed exclusively for the MCB30 and MCB60 and will not fit other Crown Verity models or third-party barbecue units. If you are unsure which barbecue you are running, it is worth confirming the model before ordering to avoid a mismatch.

This is an accessory purchase that only makes sense alongside the right host unit. If you are building out a Crown Verity setup or want to talk through how the RT30 fits into your service model, we are happy to help — give us a call or send a message.