Parry Machine Accessories

The Parry PST6 is an open-frame stand designed to support a range of compatible Parry catering appliances at a practical working height. Rather than sitting a unit directly on the floor or occupying valuable worktop space, the stand provides a stable, purpose-matched base that keeps equipment correctly positioned throughout service.

Working at the right height makes a real difference during long shifts. Operators spend less time bending or reaching, and appliances that see constant attention throughout a busy service period are easier and safer to use when they are properly elevated. The open-frame construction also allows air to circulate freely beneath the unit, and cleaning the floor area underneath is straightforward — an important consideration in any kitchen subject to regular hygiene inspections.

The PST6 is confirmed compatible with several Parry appliances, including the PDF3, PDF6, PDF9, PGC6, PG6, P4H, and PGG6. If you are purchasing one of these units, specifying the stand at the same time is sensible. Retrofitting a stand later can disrupt an established kitchen layout and may mean moving adjacent equipment to accommodate it.

Before installation, it is worth confirming that the stand is appropriate for your floor surface and that the combined height of the stand and appliance clears any overhead shelving, extraction canopy, or fixed structure in the intended location. The PST6 is best suited to operators purchasing or already running a compatible Parry unit who need a purpose-built support solution rather than a makeshift alternative.

If you are unsure whether the PST6 is the right match for your appliance or kitchen setup, we are happy to talk it through before you place an order.

The Parry PST3 is an open-frame stand designed to bring compatible Parry appliances — including the PSF range of fryers and the PG3 griddle — up to a practical working height. It provides a stable, dedicated base without the bulk or cost of a fully enclosed cabinet stand, making it a straightforward solution where a simple height correction is all that is needed.

In a working kitchen, having cooking equipment at the correct height matters more than it might seem. Operating fryers or griddles positioned too low increases fatigue during long service periods and can create unsafe working postures around hot appliances. The PST3 addresses this without overcomplicating things. Its open-frame construction also means there is no enclosed void underneath to trap grease, food debris, or moisture — all common issues during routine hygiene inspections and deep cleans.

• Raises compatible Parry appliances to an ergonomic working height
• Open-frame base allows straightforward cleaning of the floor beneath
• No enclosed cabinet to accumulate grease or restrict airflow
• Stable platform suited to the demands of busy kitchen environments
• Confirmed compatibility with Parry PSF fryer range and PG3 griddle

Installation is uncomplicated. The stand sits directly on the kitchen floor with the appliance positioned on top — no electrical or plumbing connections are required for the stand itself. The floor surface should be level and capable of supporting the combined load of the stand and the appliance it carries. Ventilation and clearance requirements are determined by the appliance being used, not the stand.

The PST3 suits smaller kitchens, pop-up operations, and sites where a specific Parry fryer or griddle simply needs lifting to a usable height without investing in a larger fabricated unit. If you are running a Parry model outside the confirmed compatibility list, it is worth checking suitability before ordering. For busier sites running heavier or larger equipment, a more substantial stand or fabricated base unit may be the better choice.

If you would like to confirm whether the PST3 is the right fit for your appliance and kitchen setup, our team is happy to talk it through with you.

The Parry 1876 is a branding plate designed exclusively for use with the Parry 1872 salamander grill. It attaches to the host unit and allows operators to apply consistent char-mark lines to meat, fish, and other grilled items directly under the salamander element — producing the kind of branded, visually finished result that grill-led menus typically require.

In a busy service environment, a branding plate like this gives the salamander a secondary function without the footprint or cost of a dedicated chargrill. That is particularly useful on tighter service lines where space is limited but the menu demands a marked finish. Consistency across covers is straightforward to maintain, which reduces variation on the pass during peak service.

• Adds char-mark capability to an existing salamander station
• Removes the need for a separate chargrill on space-constrained lines
• Supports consistent plate presentation throughout service
• Extends the functional range of the Parry 1872 without additional equipment
• Straightforward to integrate into an established grill station setup

Because this is an accessory rather than a standalone unit, compatibility is the key consideration before ordering. The 1876 is confirmed for use with the Parry 1872 salamander and is not a universal fitting. If you are specifying a new grill station from scratch or are uncertain whether your current salamander is the correct model, it is worth confirming before you purchase.

If you would like to talk through how this accessory fits your existing setup, the team is happy to help you get it right.

The Parry 1875 is a set of wall mounting brackets designed specifically for use with the Parry 1872 salamander grill. Rather than occupying counter or shelf space, the brackets allow the salamander to be fixed directly to a wall surface, keeping the unit at a practical working height and freeing up the space beneath for other tasks.

In a busy kitchen, counter space is rarely in surplus. Wall-mounting a salamander is a straightforward way to reclaim that space without compromising access to the grill during service. The brackets are purpose-made for the 1872, so fitment is a direct, matched installation rather than an improvised workaround.

A few practical points worth considering before purchasing:

• Designed specifically for the Parry 1872 salamander — confirm compatibility before ordering if you have a different model
• Wall construction must be capable of supporting the weight of the mounted grill safely
• Installation should be carried out by a competent engineer or tradesperson
• The mounting position will affect usable working height — worth thinking through before fixing

These brackets are a straightforward accessory suited to kitchens where wall-mounting the 1872 salamander makes sense operationally — typically smaller kitchens with limited bench space, or where a fixed installation is preferred for workflow reasons.

If you're unsure whether these brackets are the right fit for your setup, or you'd like to talk through the installation requirements, we're happy to help.

The Parry 7072FS is a purpose-built floor stand designed exclusively for the Parry 7072 grill. It does one job and does it well: raises the parent unit to a practical working height and gives it a stable, fixed footprint on the kitchen floor. It is not a universal stand and is not compatible with other equipment.

In a working commercial kitchen, having equipment positioned at the correct height makes a genuine difference over a long service. Operators avoid stooping or reaching awkwardly, which matters when a grill is in near-constant use during a busy period. A dedicated stand also lifts the unit clear of floor-level moisture and debris, makes cleaning beneath and around the equipment more straightforward, and contributes to a tidier, more organised kitchen layout.

• Raises the Parry 7072 to a comfortable, ergonomic working height
• Creates a stable, dedicated footprint to prevent movement during use
• Lifts the unit clear of the floor, supporting hygiene and easier cleaning
• Keeps the kitchen layout organised with equipment properly sited

From a practical standpoint, the stand is straightforward to incorporate into a new or existing installation. It is worth confirming floor surface and levelness before fitting, as any unevenness beneath the stand will affect stability. Kitchens with limited floor space should consider the combined footprint of the stand and unit together when planning the layout.

The 7072FS is the right choice for operators running the Parry 7072 who need the unit freestanding at counter height rather than bench-mounted. If you are unsure whether this stand suits your installation or how it fits within your existing setup, we are happy to talk it through.

The Parry 7075 wall brackets are a purpose-made mounting accessory designed to allow compatible Parry grill and charcoal units to be fixed securely to a wall. Rather than sitting on a stand or countertop, wall-mounted installation can free up valuable worktop space and create a cleaner, more permanent setup in a busy service kitchen.

These brackets are confirmed as compatible with Parry models 1872, CPG, CAS, and CAS2. If you are unsure whether your specific model is covered, it is worth checking before ordering — fitting the wrong bracket to a heavy piece of equipment is a straightforward problem to avoid with a quick conversation.

Wall mounting a grill unit does introduce some practical considerations worth thinking through before installation: the wall structure must be capable of bearing the combined weight of the bracket and the unit, appropriate fixings will need to suit the wall material, and positioning should account for adequate clearance to surrounding surfaces and ventilation requirements above the unit. In most cases this is a job for a competent installer or gas engineer depending on the type of unit being mounted.

These brackets suit kitchens where space efficiency matters and a fixed, permanent grill position is preferable to a freestanding arrangement. They are a simple but practical addition when setting up or reconfiguring a Parry grill installation.

If you would like to confirm compatibility with your existing Parry equipment or discuss your installation setup, the team is happy to help you work through the specifics before you order.

The Parry 7073FS is a floor stand designed specifically to work with the Parry 7073. Its primary purpose is to raise the unit to a practical working height, allowing the 7073 to operate as a freestanding piece of equipment where bench or countertop mounting is not possible or not preferred.

For kitchens where the 7073 is a primary piece of service equipment and floor positioning suits the layout better than a built-in bench solution, this stand provides a straightforward means of achieving that setup. It is a dedicated accessory rather than a universal stand, so compatibility with the 7073 is assured.

We currently have limited detail available on the construction, load rating, and any height adjustability of this stand. Before ordering, it is worth confirming with us that it suits your floor type, available footprint, and how it fits into your wider kitchen layout — particularly if the grill will be in a high-traffic section of the kitchen.

If you are specifying the Parry 7073 as part of a wider equipment setup and are unsure whether floor-mounting is the right approach for your space, we are happy to talk it through.

The Parry PST7 is an open-frame floor stand designed to raise compatible Parry appliances to a practical working height. It is a freestanding unit intended for kitchens where a fabricated bench or built-in position is not available, or where a more flexible arrangement is preferred. Confirmed compatible models include the Parry PGG7 and PG7 griddle range.

Working at the correct height matters more than it might seem during a long service. Operators working too low fatigue more quickly, service quality can slip, and thorough end-of-day cleaning becomes harder when an appliance sits close to the floor. The PST7 addresses both without requiring any structural alteration to the kitchen.

• Raises compatible appliances to an ergonomic, practical working height
• Open-frame construction allows airflow around the appliance base
• Underside remains accessible for connection checks and routine cleaning
• Freestanding — no fabricated bench or fixed installation required
• Keeps the appliance base clear of floor-level pooling and cleaning residue

The open design also keeps the underside of the appliance reachable, which is useful for checking gas or electrical connections and simplifies cleaning on tiled or sealed kitchen floors where water and residue can gather beneath equipment.

Compatibility is specific to certain Parry models, so if you are pairing this stand with a Parry appliance other than the PGG7 or PG7, it is worth checking suitability before ordering. If you are unsure whether the PST7 fits your setup, the team is happy to talk it through.

The Parry PST4 is an open-base floor stand designed to raise compatible Parry countertop units to a practical working height. It is a purpose-matched accessory rather than a universal stand, built to pair with specific Parry models and provide a stable, correctly proportioned platform beneath them.

In a working kitchen, equipment height has a direct effect on operator comfort and efficiency across a full service period. Positioning a unit at the correct height reduces unnecessary bending and fatigue — particularly relevant when the same piece of equipment sees near-constant use. The open-base construction keeps the floor area beneath the unit fully accessible, with no enclosed panels to trap grease or food debris. That makes routine cleaning straightforward and supports good hygiene practice on the kitchen floor.

• Elevates compatible Parry units to an ergonomic working height
• Open base keeps the floor area clear and simple to clean
• No enclosed panels means less opportunity for grease and debris to accumulate
• Stable platform maintains consistent equipment positioning during service
• Simple construction with no components requiring routine maintenance

Positioning is straightforward — place the stand on a level floor surface and seat the corresponding Parry unit on top. It is worth confirming the floor is level before finalising placement, as an uneven surface can affect stability. Because the PST4 is matched to specific Parry models rather than being a universal stand, confirming compatibility before ordering is important.

The PST4 suits operations where a compatible Parry unit is already in use or is being ordered alongside it. It is a practical supporting accessory rather than a standalone purchase. If undercounter storage is also a requirement, a stand with an enclosed base or integrated shelf may be a better fit for the operation.

If you would like to confirm compatibility with your current or planned equipment before placing an order, our team is happy to talk it through.

These 100mm castors are a Parry accessory designed to add mobility to compatible fabricated tables. Supplied as a set with two lockable wheels, they allow a table to be repositioned when needed whilst remaining securely fixed in place during service. The 100mm height is matched to keep the working surface at standard table height, so fitting them does not require any adjustment to the table's operational setup.

In a busy kitchen environment, being able to reposition equipment quickly — for deep cleaning, reconfiguring a section, or accommodating a temporary layout change — is a practical advantage. The locking castors ensure the table stays put once it's where you need it, which matters in a service environment where stability is expected as standard.

• Two castors lockable for stability during service
• Matched height maintains standard table working surface level
• Enables repositioning for cleaning or layout adjustments
• Suitable for compatible Parry fabricated tables

Before ordering, it's worth confirming compatibility with your specific table model. Castor fittings vary between fabricated units, and what works on one table may not suit another. If you're unsure which castors are correct for your table, or whether these are the right fit for your setup, our team is happy to help you check before you order.