Valera CW35A Induction Hob and Wok product image

Valera

Valera CW35A Single Zone Induction Wok Hob

SKU: CW35A

£616.00(£739.20 inc VAT)
Get a quote

Request a callback

Leave your details and we will call you back about Valera CW35A Single Zone Induction Wok Hob.

Delivery Information

Price Match

  • In the event of equipment failure any parts needed will be provided 3
  • In the event of equipment failure an engineer will be sent for an onsite repair 3
  • Equipment can be connected to a single phase power supply – must be installed by a competent person
  • Equipment that should be connected to a suitably rated outlet - must be installed by a competent person

The Valera CW35A is a single-zone commercial induction hob built specifically for wok cookery. Unlike a standard flat induction hob designed around pots and flat-based pans, the CW35A features a dished cooking surface that cradles a round-bottomed wok and holds it stable during the fast, high-heat movements that wok cooking demands. It is compatible with any ferrous-based cookware, including 18/8 stainless steel woks, so in most cases it will work with the wok sets already in a kitchen.

Induction transfers heat directly into the pan rather than through a radiant element or open flame, and the response to power adjustments is near-immediate. For wok cookery, where temperature management is central to the technique, that precision is genuinely useful during a busy service. There is no residual heat from a burner carrying over between dishes, and the absence of combustion reduces ambient temperature at the station — a practical consideration in tight or warm prep areas.

From a day-to-day operational standpoint, the CW35A offers a number of practical advantages:

  • Near-instant heat response gives the operator direct, intuitive control throughout service
  • No combustion means lower ambient heat and a cleaner working environment at the station
  • Smooth dished surface with no grates or burner components to strip down for cleaning
  • Lower energy draw compared to equivalent gas output, supporting running cost management
  • Practical where gas supply is unavailable, restricted, or subject to planning constraints

Because this is an induction unit, cookware must contain a ferrous element — aluminium and copper pans will not work. The dished surface is purpose-built for wok use and is not suited to flat-based general cooking. Before installation, electrical capacity should be assessed carefully, particularly where multiple units are being added to the same circuit run.

The CW35A is well suited to pan-Asian restaurants, noodle bars, and similar operations where wok-style cooking features regularly on the menu, and particularly where a gas supply is not available or practical. As a single-zone unit, sites with high concurrent wok output may find a multi-zone or higher-capacity alternative a better fit. For lighter or intermittent use, it also works well as a supplementary station alongside an existing range.

If you are working out whether induction wok cookery is the right approach for your kitchen layout or service volume, we are happy to talk it through before you commit.

Frequently asked questions

Is this unit suitable for a high-volume wok station running multiple covers simultaneously?

As a single-zone unit, the CW35A is designed for one wok at a time, making it well suited to smaller operations or as a dedicated supplementary station. Sites running high concurrent wok output — for example, a busy pan-Asian kitchen turning over significant covers at peak — may find a multi-zone induction wok unit or a higher-capacity setup a more practical fit. It is worth talking through your expected service volume before deciding.

What are the key installation requirements for the CW35A?

The CW35A runs on an electrical supply rather than gas, so the primary installation consideration is ensuring adequate electrical capacity at the point of use. Where multiple induction units are being installed on the same circuit run, the cumulative load should be assessed by a qualified electrician before installation. Unlike a gas wok burner, there is no requirement for gas pipework or a dedicated combustion ventilation hood, though general kitchen extraction should still be in place.

Will our existing woks work with this induction hob?

The CW35A is compatible with any wok that has a ferrous base — 18/8 stainless steel woks are the most common in commercial kitchens and will work with this unit in most cases. Aluminium and copper woks are not compatible with induction and will not heat. If you are unsure about your existing cookware, a simple magnet test will confirm compatibility — if a magnet holds to the base, the wok will work on induction.
Valera CW35A Single Zone Induction Wok Hob

£616.00(£739.20 inc VAT)

£616.00(£739.20 inc VAT)

The Valera CW35A is a single-zone commercial induction hob built specifically for wok cookery. Unlike a standard flat induction hob designed around pots and flat-based pans, the CW35A features a dished cooking surface that cradles a round-bottomed wok and holds it stable during the fast, high-heat movements that wok cooking demands. It is compatible with any ferrous-based cookware, including 18/8 stainless steel woks, so in most cases it will work with the wok sets already in a kitchen.

Induction transfers heat directly into the pan rather than through a radiant element or open flame, and the response to power adjustments is near-immediate. For wok cookery, where temperature management is central to the technique, that precision is genuinely useful during a busy service. There is no residual heat from a burner carrying over between dishes, and the absence of combustion reduces ambient temperature at the station — a practical consideration in tight or warm prep areas.

From a day-to-day operational standpoint, the CW35A offers a number of practical advantages:

  • Near-instant heat response gives the operator direct, intuitive control throughout service
  • No combustion means lower ambient heat and a cleaner working environment at the station
  • Smooth dished surface with no grates or burner components to strip down for cleaning
  • Lower energy draw compared to equivalent gas output, supporting running cost management
  • Practical where gas supply is unavailable, restricted, or subject to planning constraints

Because this is an induction unit, cookware must contain a ferrous element — aluminium and copper pans will not work. The dished surface is purpose-built for wok use and is not suited to flat-based general cooking. Before installation, electrical capacity should be assessed carefully, particularly where multiple units are being added to the same circuit run.

The CW35A is well suited to pan-Asian restaurants, noodle bars, and similar operations where wok-style cooking features regularly on the menu, and particularly where a gas supply is not available or practical. As a single-zone unit, sites with high concurrent wok output may find a multi-zone or higher-capacity alternative a better fit. For lighter or intermittent use, it also works well as a supplementary station alongside an existing range.

If you are working out whether induction wok cookery is the right approach for your kitchen layout or service volume, we are happy to talk it through before you commit.